Error 8, when writing to a file

Hello everyone. I just found that "Comments and Array to txt" VI in another forum, and i have problems to write in a excel file. When i run the VI, it gives me that error :
How to handle that problem ?
Thanks in advance
Oesen
Best regards
Oesen
Attachments:
Comments and Array to txt.vi ‏10 KB

It looks like there's a localized decimal point issue here. What are you using for a delimiter? I would use a tab and change the extension to txt.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Why do I get a NI-488 error massage when writing into a file and at the same time copiyng this file with a backup softwarre like Easy2Sync?

I have a small LabVIEW program which writes random numbers very fast into a ASCII-file. I want that file to be copied to a new position every 10 min. Therefor I use a backup/synchronisation software which is doing a copy operation every 10 min. It works fine a certian amount of time and after a while I get either an LabVIEW error (LabVIEW: Fiel already open: NI-488 Comand requieres GPIB Controller to be System controller) or an backup-software error (couldn´t open file...whatever). I´m guessing, it has something to do with file-access but I don´t know why?!? If I run the LabVIEW program and I copy and paste the random-number-file with the windows explorer very fast (pressing ctrl+v rapidly) while LabVIEW is still writing into this file, no error appears. Can sombody help me?
LabVIEW 2011

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Errors when writing metadata to files on Windows Server

Good day!
I have an iMac running OSX 10.9 (Maverick) and Lightroom 5.2.
My catalog is on the local iMac drive, and the images are on SMB shared drive (handled by Windows 2012 server).
I decided to do the final layout of my album using InDesign, and for that I needed to access to images using Bridge. So selected all the images (the rated once...) and issue a Metadata/Save command.
The system came back with errors on many of the files (such as Photos are read only, and unknown errors).
Retrying to save the metadata on image that was flagged with an error usually (but not always) worked.
I tried to select save the metadata for few (6) images in a time, many times it was ok, but sometimes, one or two of them failed (and retrying again usually solved the problem).
It looks to me like a timing related issue.
Any ideas?
(After spending about an hour on this, I have exported the images to my local drive...). In general I don't have similar problems with other apps.
Any ideas?
Yuval

I Yuval
I'm experiencing more or less the same behavior (see Read-only error when writing metadata to file over network (Synology DS1315+ using AFP) ). For me however, the problem is more pronounced if I use the AFP protocol and is better (I think as you described) if I use SMB (all done on a Synology DS1315+). With SMB it most often works but in very rare cases I also get the "read only" message!
Do you have solution to this? Or are you stuck as I am?
Cheers, Chris

Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)

We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
Any help would be appreciated.
Thanks!
Rich Oliver

Hi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue. I think it might be a timing issue with how lightroom interact with a slower write delay using network shares. I suggest you also chime into this thread: Lightroom 5 can't write metadata to DNG files I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.

Open Hub DTP issue (Error 21 when writing to the local workstation)

Hi,
I am using an openhub destination to output my csv file. Its a local workstation share folder. Data Provider got around 50000 rows (expecting a 40MB file). When ever I execute the DTP, it run for first data package and fell down with below error message.
Error 21 when writing to the local workstation
Error while updating to target XXXXXXX (type Open Hub Destination)
Operation could not be carried out for
Exception CX_RS_FAILED logged
Exception CX_RS_FAILED logged
Sometimes the file get created with partial entries, most of the times the file wont even get created. I created new dtps and tried the same. Changed the package size, servers, parallel processes etc, but of no use.
Thanks Neo

Hi Neo,
Did you try to define the logical/physcal file path from tcode FILE? If not can you try to use this option and see if it works.
Also can you change your DTP settings by reducing the data packet size to see if your facing this error message?
Thanks
Abhishek Shanbhogue

Internal error occured when writing

Hi all
I successfully imported an APO planning area into the quality systems, however the same request ends with error 12 in the production system. Landscape is SCM 5.0 sp8 with BI 7.0 sp12. When i checked the import job RDDEXECL (user DDIC), it shows:
Date Time Message text Message class Message no. Message type
07/08/2007 00:02:57 Job started 00 516 S
07/08/2007 00:02:57 Step 001 started (program RDDEXECL, variant , user ID DDIC) 00 550 S
07/08/2007 00:02:57 All DB buffers of application server <server_name> were synchronized PU 170 S
07/08/2007 00:03:17 <b>Internal error occurred when writing</b> D0 054 E
07/08/2007 00:03:17 Job cancelled after system exception ERROR_MESSAGE 00 564 A
I thought there will be an ABAP dump, I found this internal error (in bold in the log above). I tried searching for info on this but no help, it does not says error writing to what? Please help.
Thanks
Ali

It seems a syncronization problem..
You can create a customer message providing the following information:
1. The symptoms that occurred
2. The highest Support Package
3. The current SAP_BASIS Support Package level
4. The queue that is currently selected
Header Data

Error message when copying a music file from PC to BB

I get the following error message when copying a music file. Also I cannot delete any files.
"Cannot copy. The request could not be performed because of an I/O device error."

Hello lcoyote and welcome to the BlackBerry Support Community Forums.
Do you get the error on all media files or just one in particular? From where are you trying to delete files?
Is your media card formatted?
If you aren't able to add/remove media, try formatting the card as shown in KB10527
If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
Let me know how you make out
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Error exists when Admin2 loads same file in BW but loads ok for Admin1. Why

Hi,
Why does this error exists when Admin2 loads same file but loads ok for Admin1?
A u201CCalendaru201D column in a flat file has value 200810 i.e. October of 2008.
BW Admin 1:
When Admin1 loads this file, it comes out ok as Calendar Year/Month as 200810 in PSA and the load completes without any error.
BW Admin 2:
Now, for the same file, when Admin 2 loads (on his laptop), the load fails and gets the message that, ".... 00810 is not plausible..."
Somehow, it drops the initial 2 from 200810 during the load for Admin 2.
The suspicion was that Admin 1 had as Default in SU3,
Date format: YYYY/MM/DD.
Admin 2 therefore switched his to the same Date format: YYYY/MM/DD.
Yet, the described load problem still exists.
Any suggestions?
Thanks

Hi,
Yes, it is the same infopackage for the same cube, Admin 1 used to do this load, and is now moving on to a different project, so the only difference is that Admin 2 is now doing the same job from his workstation but everything on the Data Flow is the same.
In fact, Admin 2 went to Admin 1, after forwarding the .csv file and on Admin 2's workstation, the same file was tested by Admin 2, using the same infopackage, and it loaded without the above problem for Admin 2.
Thanks

I receive an error message when submitting a pdf file for conversion to a Word document "... an unex

I receive an error message when submitting a pdf file for conversion to a Word document "... an unexpected error has occurred..." - is there a way to overcome this error?

I received your Scan.pdf sent to [email protected] and had no problem to convert it via Export PDF service. Could you try again?
Jyh-Jiun Liou

API5317: Error occured while writing to archive file

We have been making daily archives for weeks and then one morning started getting this error:
API5317: Error occured while writing to archive file f:\OWB\Archives\Daily\backups\Friday\projects\erm_phase1\project.mdl
We have checked space on the disc, and running the archive from different PCs. Is possible that there is a limit on the archive file? The archive file is in the order of 21M. I am worried about the upgrade to the new version if we cannot make archives. Any suggestions?

Marlene,
Which OWB version are you using and what is the database version?
Regards:
Igor

internal error problem when writing table:

Hi,
When my user try to access BEx queries, he is getting the following pop up messages
<internal error> problem when writing table: C_T_VARIABLES
<internal error> problem when writing table: E_T_DIM
<internal error> problem when writing table: E_T_MEM
<internal error> problem when writing table: E_T_ATR
<internal error> problem when writing table: E_T_PRPTYS
<internal error> problem when writing table: C_T_HRY_TYPES
<internal error> problem when writing table: E_T_CEL
<internal error> problem when writing table: E_T_FAC
<internal error> problem when writing table: E_T_CON
<internal error> problem when writing table: E_T_DRILL
and then report is getting diplayed. and when user try to edit properties again same pop up messages are coming.
when I access queries from my machine those are working fine..
Can some one help me to solve this ?
Regards,
Harish

Hi Harish,
Please go through following relevant threads ::
http://forums.sdn.sap.com/thread.jspa?threadID=137355
http://forums.sdn.sap.com/thread.jspa?threadID=644834
http://forums.sdn.sap.com/thread.jspa?threadID=1199718
http://forums.sdn.sap.com/thread.jspa?threadID=36530
Regards,
Arpit

Internal error occurred when writing

Hi,
We have a brand new sandbox setup and I am trying to create a planning Object Structure. I added the objects and checked for errors, I got no errors. But when I try to activate the POS, I am getting the following error:
Internal error occurred when writing
Message no. D0054
Can somebody help me identify what the problem is?
Thanks.

Hello Raj -
Look at the following note
647603 if you are using SCM 4.0.
Apply the corrections this might help.
Also if you are using SCM 5.0 try to go thru the post installation steps and you will come across activation of infoobjects that are relevant and are needed for POS.
Perform the steps as described and the message shud go away.
Hope this helps.
Regards,
Suresh Garg

Getting an Error 5 message when writing to a file

Running Windows 7 and getting this error 5 when trying to write to a file
It seems such a simple thing to do, I have used the write to file on other projects with no issues but
on this Win 7 machine ( and another also) it just doesn't want to play
Solved!
Go to Solution.
Attachments:
SFI Temp v1 error 5 write to file.vi ‏140 KB
sfi error 5.ppt ‏254 KB

Nick5405 wrote:
Spoiler (Highlight to read)
The reason the file was in a .ppt was because I did a screen snapshot and had to paste it into something.
I never knew about the Powerpoint thing.
The file was not open in anything, I canged the file so it left the default location that LV puts them in to a memory stick
and that worked fine and then I made a new folder on my C drive and that worked also.
I don't understand why it wouldn't work on the default Folder but I don't really care about that anymore.
Maybe just a Win7 thing
The reason the file was in a .ppt was because I did a screen snapshot and had to paste it into something.
I never knew about the Powerpoint thing.
The file was not open in anything, I canged the file so it left the default location that LV puts them in to a memory stick
and that worked fine and then I made a new folder on my C drive and that worked also.
I don't understand why it wouldn't work on the default Folder but I don't really care about that anymore.
Maybe just a Win7 thing
Is there a solution here?
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

UTL_FILE write_error when writing large binary files to unix os

I am trying to write large files to a folder in unix from a table containing a BLOB object. The procedure below is called by another procedure I have written to do this. It works in windows environment fine with files up to 360MB. When I run this exact same procedure in UNIX I get an initialization error. When I change the WB in the fopen call to W it works. I can store all the files I want up to 130MB in size. The next size larger file I have is 240MB and it fails after writing the first 1KB passing the utl_file.write_error message. If someone can help me to diagnose the problem, I would really appreciate it. i have been trying everything I can think of to get this to work.
Specifics are, the windows version is 10GR2, on unix we are running on Sun Solaris 9 using 9iR2
PROCEDURE writebin(pi_file_name IN VARCHAR2, pi_file_url IN VARCHAR2, pi_file_data IN BLOB)
IS
v_file_ref utl_file.file_type;
v_lob_size NUMBER;
v_raw_max_size constant NUMBER := 32767;
v_buffer raw(32767);
v_buffer_offset NUMBER := 1;
-- Position in stream
v_buffer_length NUMBER;
BEGIN
-- WB used in windows environment. W used in unix
v_lob_size := dbms_lob.getlength(pi_file_data);
v_file_ref := utl_file.fopen(pi_file_url, pi_file_name, 'WB', v_raw_max_size);
v_buffer_length := v_raw_max_size;
WHILE v_buffer_offset < v_lob_size
LOOP
IF v_buffer_offset + v_raw_max_size > v_lob_size THEN
v_buffer_length := v_lob_size -v_buffer_offset;
END IF;
dbms_lob.READ(pi_file_data, v_buffer_length, v_buffer_offset, v_buffer);
utl_file.put_raw(v_file_ref, v_buffer, TRUE);
v_buffer_offset := v_buffer_offset + v_buffer_length;
END LOOP;
utl_file.fclose(v_file_ref);
END writebin;
Message was edited by:
user599879

check if this cample code helps -
CREATE OR REPLACE PROCEDURE prc_unload_blob_to_file IS
vlocation      VARCHAR2(16) := ‘LOB_OUTPUT’;
vopen_mode     VARCHAR2(16) := ‘w’;
bimax_linesize NUMBER := 32767;
v_my_vr        RAW(32767);
v_start_pos    NUMBER := 1;
v_output       utl_file.file_type;
BEGIN
FOR cur_lob IN (SELECT vmime_type,
blob_resim,
vresim,
dbms_lob.getlength(blob_resim) len
FROM tcihaz_resim a
WHERE rownum < 3 -- for test purposes
ORDER BY a.nresim_id) LOOP
v_output := utl_file.fopen(vlocation,
cur_lob.vresim,
vopen_mode,
bimax_linesize);
dbms_output.put_line(’Column length: ‘ || to_char(cur_lob.len) || ‘ for file: ‘ ||
cur_lob.vresim);
v_start_pos := 1;
IF cur_lob.len < bimax_linesize THEN
dbms_lob.READ(cur_lob.blob_resim,
cur_lob.len,
v_start_pos,
v_my_vr);
utl_file.put_raw(v_output,
v_my_vr,
autoflush => TRUE);
dbms_output.put_line(’Finished Reading and Flushing ‘ || to_char(cur_lob.len) ||
‘ Bytes’ || ‘ for file: ‘ || cur_lob.vresim);
ELSE
dbms_lob.READ(cur_lob.blob_resim,
bimax_linesize,
v_start_pos,
v_my_vr);
utl_file.put_raw(v_output,
v_my_vr,
autoflush => TRUE);
dbms_output.put_line(’Finished Reading and Flushing ‘ || to_char(cur_lob.len) ||
‘ Bytes’ || ‘ for file: ‘ || cur_lob.vresim);
END IF;
v_start_pos := v_start_pos + bimax_linesize;
WHILE (v_start_pos < bimax_linesize) LOOP
-- loop till entire data is fetched
dbms_lob.READ(cur_lob.blob_resim,
bimax_linesize,
v_start_pos,
v_my_vr);
utl_file.put_raw(v_output,
v_my_vr,
autoflush => TRUE);
dbms_output.put_line(’Finished Reading and Flushing ‘ ||
to_char(bimax_linesize + v_start_pos - 1) || ‘ Bytes’ ||
‘ for file: ‘ || cur_lob.vresim);
v_start_pos := v_start_pos + bimax_linesize;
END LOOP;
utl_file.fclose(v_output);
dbms_output.put_line(’Finished successfully and file closed’);
END LOOP;
END prc_unload_blob_to_file;
set serveroutput on
set timing on
create or replace directory LOB_OUTPUT as ‘/export/home/oracle/tutema/’;
GRANT ALL ON DIRECTORY LOB_OUTPUT TO PUBLIC;
exec prc_unload_blob_to_file ;
Column length: 3330 for file: no_image_found.gif
Finished Reading and Flushing 3330 Bytes for file: no_image_found.gif
Finished successfully and file closed
Column length: 10223 for file: OT311.gif
Finished Reading and Flushing 10223 Bytes for file: OT311.gif
Finished successfully and file closed
PL/SQL procedure successfully completedWith 9iR2 PLSQL can write binary files using UTL_FILE put_raw function, prior to Oracle9iR2 you will need to create an external procedure with Java, C, VB or some 3gl language.
Some references -
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:6379798216275
Oracle® Database PL/SQL Packages and Types Reference 10g Release 2 (10.2)
UTL_FILE - http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14095
http://psoug.org/reference/dbms_lob.html
Metalink Note:70110.1, Subject: WRITING BLOB/CLOB/BFILE CONTENTS TO A FILE USING EXTERNAL PROCEDURES

Error -2147417851 when writing report to Excel

I have taken the Active-X example code where a table is written to Excel and a macro is run and adjusted it to fit my purposes. In my case, an array is written to an Excel file and thereafter a macro is run which creates some graphs and a report. This works fine on my computer with Windows 95. But, when running it on the computer it is supposed to be used on, Excel gives an access error 0xc0000005 just before a copy operation resulting in the "error -2147417851 ocurred at the server through an exception at my.vi". I am using LabVIEW full development 6.1, Windows NT 4 with the latest SP and Office 97 SP2 both wit and without all upgrades. However, if I change my macro so that it doesn't do the copy operation, it works just fi
ne, and the error is delayed until I close the document. Since my LabVIEW vi ends when the macro is completed, I don't get any error in LabVIEW.
I have searched Microsoft technet and tried the suggestions I found there, read all similar problems I could find here (I found four) but nothing seems to help. I have also tried it on a machine with XP and Office 97 SP2. The macro works fine there without modification and LabVIEW ends without error and I can even close my Excel document without errors, but when I try to quit Excel I get the same error message as always, only a different address.
I have tried to terminate the refnums in different order, inserted a delay and so on, but nothing seems to help. I still believe the error is related to LabVIEW, since my macro runs without error when launched from Excel, but I encounter the same error if the macro is launched from Excel with LabVIEW open in the background, even without open vi:s.
I have run out of ideas, and even if I am abl
e to create the reports, it doesn't feel good when Excel crashes every time. Any help would be much appreciated.
Thanks

Hi Paol,
Try looking at this answer posted a while ago it may help.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000192E0000&ECategory=LabVIEW.LabVIEW+General

Error 8, when writing to a file

Similar Messages

Maybe you are looking for