Error 8 with transportation

Hello All,
We are facing Problem with Transporting objects in to Production.
We have changed the info objects attributes to Compounding and Added this objects in Info provider.
And Deleted data from targets before importing to Production.
But we have archived files(Data archiving Using ADK) mapped to these data targers and we have not deleted from files.
And Import was failed and saying that this info objects is used in the target and data is not deleted.
Please suggest.
Thanks and Regards
Venkat

Hello Venkat
This problem you are facing because your master data infoobject still contains data.
Delete the data from your master data infoobeject also as compounding InfoObject is now in place which was not there earlier.
When you delete your infoobject data you might not be able to do it if you are using this particular infoobject in some other cubes or DSO. When you gonna delete master data you will get a pop up to know which other infocubes /dso contains this InOBJ. You need to delete those data target also to delete the master data completely.
Then only your transport will be successful.
Please keep us posted .
Regards
Anindya

Similar Messages

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Error with transporting datasource

Hello,
I have an issue activating a datasource. I created a generic datasource called 'ZHIP_TD_CLOSE_INV_BALANCE' within BW - i.e the source is BI and NOT R/3. I created transformation from datasource to Cube and loaded data. Everything is working fine. Now when I transport the datasource from Dev to Quality the transport failed. The error log says 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310' & 'Error when activating DataSource ZHIP_TD_CLOSE_INV_BALANCE WP1CLNT310'. I do not have an infosource to begin with. So then when I go and try to activate the datasource in Quality, I get the same message i.e. 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310'. How do I fix the error and get the transports through? Remember, the existing config works fine in Dev. Thanks for your help in advance.
Thanks
Nisha

what objects are you trying to transport along with the data source ? If you have transfer rules along with this request then might be you would get this error. Also check if your source conversion is maintained correctly. you can check that in RSA1 > Tools > Conversion of Source system names.
Here maintain the system conversion. Once done, recreate a transport request with only data source and transport. Once done replicate and transport your other objects.

Transport error when transporting a transformation with formulas/routines

Hi All,
I have migrated some 3.5 dataflow (Datasource, Transfer rules, Update rules, Infosource etc..) to 7.0. I am able to load the datatargets using the DTP's just fine.
The problem I am facing is transporting these dataflows to Quality and Production systems. I am specifically having problem with transporting transformations which has formulas/routines.
I was able to transport the transformations with direct mapping from source field to target fields (no formulas/routines) without any problem and it works fine in Quality system. I tried to transport couple of transformations with formulas/routines, all of them give a shortdump ASSERTION_FAILED (transport fails with error code 12).
I am not sure what the problem is. We are on support package 16. Has anyone faced this problem before? Any suggestions are appreciated.
Points are assured
Thanks,
Sirish.

Hi,
What is the dump message you are getting? Check in ST22 and let us know. And try the process which is said in the previous post collect all the transformations through transport connections and transport them.
Khaja

Help with Transport control program tp ended with error code 0203

when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.

Thank you !
My DEV system TP profile parameters is :
TRANSDIR            = /usr/sap/trans
DEV/CTC             = 0
DEV/DBHOST          = P550A
DEV/DBLIBPATH       = /usr/sap/DEV/DVEBMGS01/exe
DEV/DBNAME          = DEV
DEV/DBTYPE          = ora
DEV/NBUFFORM        = 1
DEV/TP_VERSION      = 266
#System from Transport Domain DOMAIN_P01
#TMS:0002:DOMAIN_P01
P01/DUMMY           = 1
P01/NBUFFORM        = 1
P01/TP_VERSION      = 266
P01/CTC             = 1
My PRD system TP profile parameters is :
P01/CTC             = 0
P01/DBHOST          = XCPRD01
P01/DBLIBPATH       = /usr/sap/P01/DVEBMGS01/exe
P01/DBNAME          = P01
P01/DBTYPE          = ora
P01/NBUFFORM        = 1
P01/TP_VERSION      = 266
#System from Transport Domain DOMAIN_DEV
#TMS:0009:DOMAIN_DEV
DEV/DUMMY           = 1
DEV/NBUFFORM        = 1
DEV/TP_VERSION      = 266
DEV/CTC             = 1

Error in transport, job RDDEXECL cancelled, ended with return code: 12

Hi all,
When I am trying to import a request in a BW system from development to quality , it is giving below error:
Program Terminated (job:RDDEXCEL no:11315700) messg no:TR012
Please do needful
Thanks and Regards,
srinivas.m

Hi Gurus,
I have the same error "Error in transport, job RDDEXECL cancelled, ended with return code: 12" (Programa cancelado (job RDDEXECL, nº 09292900)).
I have checked all the steps that are in the "Note 1101187 - The OLAP tunnel" and they are implemented.
Find below the information about my BW system:
SAP_ABA     700     0024     SAPKA70024     Componente multiaplicaciones
SAP_BASIS     700     0024     SAPKB70024     Sistema Base SAP
PI_BASIS     2005_1_700     0024     SAPKIPYJ7O     PI_BASIS 2005_1_700
ST-PI     2008_1_700     0004     SAPKITLRD4     SAP Solution Tools Plug-In
SAP_BW     700     0026     SAPKW70026     SAP NetWeaver BI 7.0
BI_CONT     703     0016     SAPKIBIIQ6     Business Intelligence Content
ST-A/PI     01N_700BCO     0000          -     Servicetools for other App./Netweaver 04
I am trying to transport "Business Content (Statistics)", if this information can help you.
What can i do to solve the problem? I am finding some clue and i dont find anything. It will be much appreciated any idea to solve the problem.
Thanks in advance and kind Regards,
Manuel
Edited by: Manuel Guijarro on Oct 11, 2011 3:46 PM

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error while transporting the TR to production

Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

Error while transporting 0MAT_PLANT

Hi Experts
I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
it is giving the follwoing error with return code 8
Characteristic 0MAT_PLANT: Master data has to be activated before conversion
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
1.Is it because we have large no of records in Prod system ..??
2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
3.Is it related to any database error in adjusting P table in Prod...?
Please let me know anybody faced this kind of problem.
Regards
Prasad

Hi Prasad,
Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
Please decide accordingly as there is a trade off here!
-VA
Edited by: Vishwa Anand on Sep 27, 2010 12:15 PM

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting Queries

Hi,
I am getting this error while transporting queries!!
Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing
Thanks

Hi Murali,
YOu are trying to transport the element ZTIC_UKA' of the query,may be an variable which is not colelcted in the request.
Try to transport the query through RSA1> Transport connection->Query-->give you query name -->Drag and Drop to Right hand side and Click on collect all dependent objects and check whetehr they have collected in the same request.Make sure ur variables are collected.
Tranport it now and Check.
Rgds
SVU123
Edited by: svu123 on Mar 4, 2010 7:41 AM

Error while transporting modification in module pool of a specific infotype

HI experts,
While transporting some modifications that have be done on the PAI of a module pool of a specific infotype, we have an error with code return = 8, the error is --> Original object R3TRPROGMP900730 must not be changed!!!
Any suggestion .
Tanhks a lot .

Hi ,
Nice to know that your problem is solved. If any of the replies were usefull please acknowledge their work.
And it would be great if you can just put in your remarks about the best solution you had in solving that problem.
It might be useful to other users when they encoutner such problem.
BR,
Vijay.

Error 8 with transportation

Similar Messages

Maybe you are looking for