Error 80...convet to compatible format using FDISK

hey yall just did my first dual boot and installed vista on there since windows 7 compatible issues are down and i dont want to install 7 without it being the final. everything went smooth installed all the necessary drivers to make my vista partition work. only problem is when i boot into vista it says disk error 80 format into compatible using FDISK and then continues and goes to the login screen. not sure wat im supposed to do to fix it because the boot time could b cut in half and i wouldnt have to see it lag. thanks

Hi,
i have the same problem, in the bootstrap of Vista Ultimate i get many times this error on disk 80. fix with fdisk etc etc...... many lines until finally vista starts..... once automatically power off and started again, once i catch a line where it was written "internal power failure"..... but anyway at the end Vista starts (could take 3 to 5 minutes!).
What i should do??? what kind of log file i could find to post the dialog text during boot in here, lokking for help.... thanks for your answers.

Similar Messages

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk?   It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

Hi chasore,
Are you still facing this issue?
Is this issue happening with all the documents you have. If yes, i would suggest try uninstall and reinstall. Or if the documents are located on some shared drive try to copy them on local machine and test again.
Regards,
Ajlan Huda.

While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message: DiskManagementTool has died

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Gettign this error when trying to access webpage using JRE V 1.4.2_06

Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Error while converting the ITF format to PDF format

Hi mates,
I am working on a requirement where i need to download a pdf file on to my desktop. The requirement is:
I have a data in ITF format which is fetched from READ_TEXT. Now i need to convert this ITF data format into PDF format and download the pdf file on the desktop. for this what i have done is I have converted the ITF data to XSTRING first by using the FM 'LXE_CONVERT_ITF_XML'. Now i have converted the ITF data format to XSTRING data format. Then i have converted the XSTRING data format to Binary data format using FM 'SCMS_XSTRING_TO_BINARY'. Finally i have used the cl_gui_frontend_services=>gui_download to down load the data on to the desktop in pdf format....
CALL METHOD cl_gui_frontend_services=>gui_download and passed the parameters and i am able to download the pdf file on desktop. But the problem is when I am opening the file its displaying the error message ' Adobe Reader could not open the file because it is either not a supported file type or because the file has been damaged' Any thoughts on this.... Share
Regards,
Mohammed Shukoor.

Hi
Can u tell us what is the function of the UDF in your case ?
Apart from Converting the given input xml to pdf output, I dont see there is any other functionality within the UDF .. and the XMLTOPDF Class requires the two inputs to be passed when it is instantiated in the code
and now if you don't pass those parameters, it's going to throw an IO exception
Regards
Krishna

Audio Stream Recorder - Error: Audio device is already being used by another prog

I realized that Audio Stream Recorder is does not "work" through server list feature. So I am simply trying to use the manual method of adding URL's to the interface. However regardless of the type of stream, shoutcast, windows media or real audio, I receive the error "audio device is already being used by another program". Does anyone know how to fix this? I have closed my audio application etc to no avail. <RANT WARNING> I was very excited about using this application when I read about it. However an application that provides none of the stated features is not an application, its false advertising, since it clearly states on the box, help files and website this products "features". Anyway, it'ss very disappointing. Also, does anyone know what the supported steaming formats are, the help file say the application requires RealONE and Windows Media Player but does not mention audio stream formats? Thanks you in advance for any help.

I have the same issue. I updated to the latest software, to no avail. My first suspicion is that some Microsoft patch caused this, but I cannot verify this.
Apparently no one at Creative is very interested in this issue.

How to burst reports in text and XML format using API

Hi there,
I need to be able to burst PDF, Excel etc reports and at the same time, generate XML files containing metadata that will accompany the PDF files to their destination. The reason for this, is that the destination requires metadata to class the documents in the content management system.
My issue is that I just cannot get bursting to XML, text or HTML format right. There is very little documentation available around creating reports in these formats using the API's and perhaps someone who has gotten this right can, once and for all, solve this issue where others can find the solution.
Alright, here is some sample supporting documentation (For the sake of the question, I have removed the bursting to PDF, Excel etc. formats and I am just focusing on the XML output):
In my code for bursting, I make use of the following constructor...
DocumentProcessor dp =
new DocumentProcessor("ControlFile.xml", "TestData.xml", "temp");
The ControlFile.xml looks like this...
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
_<xapi:request select="/DATA/LIST_BRANCH/BRANCH">
___<xapi:delivery>
______<xapi:filesystem id="dst" output="C:\${BRANCH_NAME}.xml"/>
___</xapi:delivery>
___<xapi:document output-type="text" delivery="dst">
______<xapi:template type="xsl-fo" location="Template.xsl"></xapi:template>
___</xapi:document>
_</xapi:request>
</xapi:requestset>
The data in my TestData.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<DATA>
___<LIST_BRANCH>
______<BRANCH>
__________<BRANCH_NAME>BRANCH 1</BRANCH_NAME>
______________ OTHER IRRELEVANT DATA
______</BRANCH>
______<BRANCH>
__________<BRANCH_NAME>BRANCH 2</BRANCH_NAME>
______________ OTHER IRRELEVANT DATA
______</BRANCH>
___</LIST_BRANCH>
</DATA>
In my ControlFile.xml, I reference my XSL file called Template.xsl which should do my transformations into XML. That file looks like:
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
__<xsl:output method="xml" indent="yes">
__<xsl:template match="/">
____<METADATA>
_______<BRANCH>
___________<xsl:value-of select="BRANCH_NAME"/>
_______</BRANCH>
____</METADATA>
__</xsl:template>
</xsl:stylesheet>
I have tried about forty variations of the ControlFile.xml and Template.xsl and have had no luck. Among the various error messages that the compiler has reported to me, these are the most common:
[101507_055953158][][EXCEPTION] Error while generating the Document...
[101507_055953158][][EXCEPTION] org.xml.sax.SAXException: element metadata is not supported yet.
[101507_061037084][][EXCEPTION] Error while generating the Document...
[101507_061037094][][EXCEPTION] oracle.xml.parser.v2.XMLParseException: Start of root element expected.
I have managed in some cases to get the API code to compile, but the outputs are empty 0kb files.
I have also exported an XSL-FO file from word, but the output is always PDF even with tweaking.
I have wasted about 9 hours on this problem and it is driving me mad! If anyone has ideas, tips and/or solutions, they would be very welcome.
Thanks in advance,
Andrew

For anyone interested... here it is!
Format Setup:
<TEMPLATE TYPE> DELIMITER_BASED
<OUTPUT CHARACTER SET> iso-8859-1
<NEW RECORD CHARACTER> Carriage Return
Sequences:
<DEFINE SEQUENCE> MetaDataSeq
<RESET AT LEVEL> BRANCH
<INCREMENT BASIS> LEVEL
<END DEFINE SEQUENCE> MetaDataSeq
Format Data Records:
<LEVEL> BRANCH
<MAXIMUM LENGTH><FORMAT><DATA>
<NEW RECORD> FileHeaderRec
16_________________Alpha_____‘<REPORT_SUMMARY>’
22_________________Alpha_____‘<TYPE>1</TYPE>’
255________________Alpha_____'<NAME>’ || BRANCH_NAME || ‘.pdf</NAME>’
255________________Alpha_____'<DESC>NON-MOTOR VEHICLE CLAIMS</DESC>’
10_________________Alpha_____‘<METADATA>’
255________________Alpha_____‘<CONTROL_AREA>MAIN CONTROL AREA</CONTROL_AREA>’
255________________Alpha_____‘<BRANCH_CODE>’ || BRANCH_CODE || ‘</BRANCH_CODE>’
255________________Alpha_____‘<BRANCH_NAME>’ || BRANCH_NAME || ‘</BRANCH_NAME>’
255________________Alpha_____'<DIVISION_CODE>1</DIVISION_CODE>’
255________________Alpha_____‘<DIVISION_NAME>PERSONAL</DIVISION_NAME>’
11_________________Alpha_____‘</METADATA>’
17_________________Alpha_____‘</REPORT_SUMMARY>’
<END LEVEL> BRANCH

How to use fdisk -e in terminal?

My problem is bit complicated, I will try explain this simple as possible.
It started because disk drive random eject, detail on this thread:
http://discussions.apple.com/message.jspa?messageID=13106931#13106931
Now one of my partition didn't mount. I try to fix this using disk utility -repair disk function- and disk warrior, both not succeed. Then I want to try repair it using Ubuntu live cd, but before that, some tutorial that I found in someone blog says I must disable journaling. It success at other 2 partition but the one that I need to repair wasn't return any dialog after about 2 minutes, that made me close Terminal. Disk1s2 is the problem.
My assumption after some googling, my partition table is messed up and need repairing. I found enlightenment when found tesdisk http://www.cgsecurity.org/wiki/TestDisk . Summaries from what I read there, I should able repair it after run test disk to analyze then using pdisk function in terminal to restore or fix the partition.
What is this mean CHS and LBA didn't match? I assume this value is needed to be repaired.
From the explanation on that site, "use pdisk to recreate the Mac partition map using the values given by TestDisk." Then I realized my partition scheme isn't Apple Partition Map. Refer to image screenshoot #1 it written Fdiskpartitonscheme or better known as MBR. Pdisk only support APM, and so far tutorial I found only write about pdisk:
http://perrohunter.com/read/30/repair-a-mac-os-x-hfs-partition-table
CMIIW but fdisk -e, edit function probably able to insert this new values on MBR. I just don't know how to do this.
So is there anyone in that able for *helping me to understand how I could edit this value using fdisk -e?* Please don't refer me to http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/ man8/fdisk.8.html . I've read that and still confused.
If possible using step by step explanation, similar with perrohunter pdisk. I'm not really expert with CLI.
Re-format the disk is not solution.
As for now my external drive condition is:
1. Random eject still occur.
2. One partition didn't mount.
3. Diskutil failed to disable journaling. Thus make worrying if fdisk also unable to do the job. But at least I want to give a try.
4. Slow write/read speed even on detected partition.

GPT fdisk (gdisk) will automatically look at the two partition tables and if they aren't the same will offer to fix them. There's ample info on the web about gdisk's options. I wouldn't let fdisk touch a GPT partitioned disk, it's for MBR disks only.
GPT disks do include an MBR, the so-called protective MBR. This is usually configured with four partitions of OS-type codes of EF or EE, IIRC.
Mac OS only uses LBA with hard drives. Internally the hard drive maps those logical block addresses to physical sectors, it's entirely possible mismatches are normal. The drive will take "bad" sectors out of use, keeping the LBA the same, but pointing to a different physical sector from a spare set of sectors.
I haven't seen anybody use CHS or ECHS in years. Not outside of some very specialized or legacy environments. The layout of the blocks on the disk surface aren't conducive to using that model any more (as the numbers of sectors present can vary by the track), and given that most everything after the first or second generation of ATA storage allows LBA. All the low-level driver stuff now tosses block numbers at the disk controller, and the disk controller and the disk map that to the particular physical or virtual geometry and figure out where the data with that address is stored, and returns it. SSD geometry, for instance, is entirely synthetic.
As for the GPT, EFI can find and fix what it considered bogus GPTs, which royally twisted some of the OS code I was working with around online disk volume expansions, and also snarled some stuff around non-GPT aware file systems with the copy of the GPT that is located at the highest LBA addresses. (I haven't checked this with the Apple implementation of EFI, but I've met a number of versions of EFI that do (often silently) repair corrupt GPTs. The EFI folks were probably better served by not silently repairing the GPT but rather tossing some diagnostics, but that's another discussion.)
As for the OP, the fix for a corrupted disk volume structure is to get the data off of the disk (quite possibly with the brute-force dd approach, if there's no current backup), and to then reinitialize and reload the disk volume. The dd gets you a copy of whatever is out there before repairs are attempted.
And to the OP, if you want to learn about the GPT structures, go have a look at the Intel EFI site or the UEFI forum sites. The details on the GPT structures are in the EFI specifications there.

How to convert Date in varchar(50) format MM/DD/YYYY HH:MM into YYYY-MM-DD format using MS SQLServer 2008 R2 ?

Hi,
I am getting the error "The conversion of a varchar data type to a datetime data type resulted in an out-of-range value."
when converting date in format Date in varchar(50) format MM/DD/YYYY HH:MM into YYYY-MM-DD format using MS SQLServer 2008 R2.
Please note that the date in column is Date(varchar(50), null).
I used the following syntax:
SELECT CONVERT(VARCHAR(10), Date, 102) AS Day
FROM dbo.[RCap_2G MM/Operator]
WHERE (CONVERT(VARCHAR(10), Date, 102) > { fn NOW() } - 1)

As noted above, either use ISDATE or TRY_CONVERT with the correct conversion style number:
-- SQL Server 2012 code
DECLARE @Date varchar(50) = '10/23/2006 10:20';
SELECT TRY_CONVERT(DATE, @Date, 101) AS Day
-- 2006-10-23
Datetime conversion blog:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Creating a .swf in InDesign, is there anyway to export it into a more compatible format?

I am not sure if the above question is actually what I am asking. I created a training module using a ton of these .swf files in InDesign. The .swf files don't line up with the timeline so they can't be paused, fast forwarded or controlled in anyway. The course was created in Articulate Storyline, their solution is to import it as a video and not flash. When I do that it becomes a static image. I have the cloud, I attempted to pull it into After Effects and then export it, but it again, I cannot import it.. (I am still in the beginning stages of learning that program.) I've installed Flash Pro and attempted the same.
Is there anyway I can make these files into a compatible format, say mpg-4?
Thanks!
Monica

I wrote that wrong. I create all of my images, backgrounds, designs, and animations in InDesign. From InDesign, I export the images as jpgs and the animations as .swfs. From there, I import the .swfs into storyline as a flash object, and it plays normally; however, in the player within storyline, while viewing the course, when the slide is paused the .swf keeps going.. If it's fast forwarded, the .swf starts from the beginning. My goal is to have it work with the player controls, pause with the slide, and continue where it left off - all of that.
The only way to do so, which I found in the storyline forum, is to import it as a video.
So the animations I created in Indesign, exported to a .swfs, I attempted to pull into After Effects and then export them; however, it doesn't actually play or seem to exist in after effects - or in Flash Pro, even Premiere.
Sorry if this confusing.
Thanks a lot!!

Error 80...convet to compatible format using FDISK

Similar Messages

Maybe you are looking for