Error 800f0922 when adding Print Services

I have two Windows 2012 R2 servers having the same problem. I removed the Internet Print Service from one of them to troubleshoot a problem and when I try to add it back I get an error that doesn't say very much. (Unable to complete installation. Error 0x800f0922)
I removed print services from a second non-production machine and have the same errors. I have run SFC checks as well as DISM health checks and there are no reported errors on either system. 
Any guidance would be appreciated.
Update: I was able to get Print Services to reinstall by installing it separately from Internet Printing. Internet Printing still will not install.

Hi,
Regarding your description, I did a test on my Windows Server 2012 R2 environment.
I removed the internet printing service through the add roles and features function and then reinstalled the internet printing service back successfully.
Besides, I also removed the print services feature and then reinstalled it back with internet printing service installed. However, I didn’t receive any error on the above 2 tests.
So I’d like to suggest you to reboot the server and then have a try. If you still got errors, can you please check the event log, and send us the event log. In that way we can do a further investigate.
Best Regards,
Eliane
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • Error -9672 when adding printer

    I've looked on the posts, guys, and I can't find something that will help. I had a Brother MFC-201C on my Airport before, but I disconnected it and used it directly through USB. I have just tried reconnecting it to the Airport, and it is identified as a rendevous printer, but when I try to add it I get the "error -9672" problem. Any ideas how I go about getting this printer added? I've updated all the firmware of Airport.

    Try this first:
    1. Unplug AirPort Express, and turn off the printer.
    2. Disconnect the USB cable from the AirPort Express.
    3. Plug in AirPort Express, and turn on the printer.
    4. After AirPort Express finishes starting up, reconnect the USB cable from the printer.
    If that fails, read Printer troubleshooting for AirPort Extreme and AirPort Express

  • Photoshop is broken and the error occurs when I print

    The error occurs when I print : Faulting application name: Photoshop.exe, version: 15.2.2.310 Faulting module name: ntdll.dll, version 6.1.7601.18247 Exception code: 0xc0000374 Fault offset: 0x00000000000c4102 Faulting process id: 0x1984 Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe Faulting module path: C:\Windows\SYSTEM32\ntdll.dll Report Id: 43f65cf1-c8c1-11e4-9c14-6c626d4094a5
    How can I fix it ?
    Windows 7  Home Premium
    Photoshop CC 2014

    Being that it failing in Windows module ntdll.dll when you try to print make sure that you has the latest Printer drivers install for your printer.  Make sure your printer setting are proper. Try printing to a different printer or windows Microsoft XPS Document Writer.

  • SDK Error -5002 when adding a sales order

    I'm getting an error -5002 when adding a sales order.
    Source code:
          IDocuments m_so2 = SBOCOMUtil.newDocuments(icmp, SBOCOMConstants.BoObjectTypes_Document_oOrders);
          line = m_so2.getLines();
          m_so2.setCardCode("2173231916");
          m_so2.setCardName("test Sales order");
          SimpleDateFormat formatter = new SimpleDateFormat("dd.MM.yyyy");
          Date today = Calendar.getInstance().getTime();
          m_so2.setDocDueDate(today);
          line.setItemCode("01005");
          line.setDiscountPercent(new Double(10));
          line.setItemDescription("description Testing");
          line.setQuantity(new Double(3));
          line.setTaxCode("0");
          line.add();
          long rc = m_so2.add();
    Question:
    Where can I find a list of error codes that can be easy to understand? PDF, word, etc.
    Thanks.

    Hi Diego,
    Looking at your code I see that you are doing a
    line.add();
    You don’t need to have this here unless you are adding another line to your document.
    Maybe this will help you.
    Also just because java is a bit different from VB get the last error message using
    SBOErrorMessage errMsg= comp.getLastError();
    System.out.println(errMsg.getErrorMessage());
    -Cormac

  • Error 5 when adding to PSA

    Hi All,
    I faced an error 'Error 5 when adding to PSA'  (going into short dump ABAP runtime erro : Message Type X Erro). I am trying to load the data from ODS to another ODS with full upadte through PSA . I am facing this error. Can anybody help me in this issue. Please this is very urgent, all the dependant loads are stopped in production.
    Thanks in Advance
    Narendra

    Thanks, This is solved by myself. I deleted all the failed requests in the PSA.

  • Error -9672 when adding my printer as a Bonjour printer after OS 10.5

    I can not add my HP Color LaserJet 2600n as a bonjour printer to my Airport extreme
    It gives me error -9672 when I try to make it my default printer
    It was working find on OS 10.4

    Fuga
    Oh, a belated welcome to Apple Discussions!!
    iFelix kindly provided me with these links:
    HP Deskjet 5000 Series and Photosmart 1000 Printers - 'Error - 9672' Message Displays in Mac OS X when trying to add printer in Printer Setup Utility
    HP Photosmart C3100 and C4100 Series All-in-Ones - Mac OS: 'Error:-9672' Displays on the Computer When Adding a Printer Using the Printer Setup Utility while Connected to an Apple Airport Base Station by USB.
    Hope you can resolve your problem with the aid of these.

  • Windows update error 800f0246 when installing printer driver

    I have Win 7 pro 64 bit and an HP3520 printer.  HP site says a Windows 7 driver is available via windows update.  When I go into Windows update, the drivers shows up under optional downloads.  When I try to download and install it it fails with error code 800f0246.  All other updates install fine.  I tried multiple times with the same error. 
    When I go into device manager the printer is listed under other devices with an icon indicating a driver issue.  When I try to update the driver it finds the downloaded driver that Windows update downloaded.  I select it and it fails.
    I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
    Any ideas?

    No go.  Uninstalled, rebooted, tried to reinstall again, still failed.  Fails when the printer is disconnected as well.  The HP site does not have a driver for manual install.  Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968    Those steps do not work because the driver in windows update fails to install.

  • HP Laserjet 1018-script error message when I print from web sites

    I have a HP Laserjet 1018. When I print from Microsoft products, it prints fine. However, when I try to print from a web site, it gives me an error message stating that there  is a script error.

    Its some PDF files, it prints using Adobe on a Windows OS just fine, but not in adobe on the Mac. It prints using preview but all the fine details of the picture does not print. One file that does not print is a drawing generated from AutoCAD.

  • Error Message when adding Expired Bidder

    Good Day Experts!
    I would like to know if there is a way to restrict adding of expired contact persons in an RFx.
    Thank you!

    If the system allows you to add expired bidders, you could implement the BBP_DOC_CHECK_BADI to throw an error message when that happens.

  • Error message when we print but the printer work correctly

    Thanks John, Excel Job Control is in grey but unchecked, I will try the PostScript driver

    Hello everyone,We have 4 Konica multifunction, 1 for each department, 4 differents model.We have 1 multifunction (Konica C253), when the users start a printing job, they have a error message that the document is not print, but 30 seconds later the print job start correctly or when the print job is stuck, another user start a job and the 2 print job start correctly.I have try to disable bidirectionnal support, i've reboot the print server (Windows 2008 standard x64), reboot the multifunction. Konica technician have replace the network card and the hard drive a few months ago.With WIreShark, i saw no communication broken, anytime a users start a job the pc and the multifunction can communicate between us.The driver install on the server is a PCL driver like the 3 others multifunction.I Have installed locally the printer on one pc this...
    This topic first appeared in the Spiceworks Community

  • Error message when adding values to another table

    hi i have a situation where am adding values from a view to a bean,my use case is i have a list of user in my view where am adding them to my bean by clicking the button,but now i what to validate when adding a user in such a way that if i added a use in my bean and i try to add that user again in current selection i must have validating error saying the user have been added already my code is
    Edited by: adf0994 on 2012/12/13 2:19 PM

    looks like you should have asked this in the ADF-forum...
    JDeveloper and ADF
    Why don't you simply configure the user name beeing unique in your entity?
    ADF would raise an exeption for you.
    public String onRowCreate( Row currentRow ) {
    return null;
    }Don't do that.
    returning a literal null is almost ever a mistake! In this certain case you should declare you methods return type as void and ommit the return statement.
    bye
    TPD

  • Error 404 when accessing presentation services

    Hi,
    I am encountering Error 404 when I am trying to access the presentation services.
    All my services are up and running. A ./opmnctl status shows all the components to be "Alive"
    My enterprise manager and the console are up and running.
    I have never encountered this kind of situation before. Any inputs please?
    Akshatha

    Hi Akshatha,
    Start checking following things
    1. http://localhost:7001/console        is this accessible to you? or http://<machine IP>:7001/console
    2. If yes  ...Login with weblogic user
    3. to check analytics  Go to Home >Environment > Servers >bi_server1 > Deployments
    4. In this you get J2EE analytics application deployment status
    if you are able to http://<machine IP>:7001/em
    check Business Intelligence > coreapplication status
    If coreapplication is up and running http://<machine IP>:9704/analytics    should be accessible.
    Regards,
    Akshay

  • All in One D145 - Error Message when changing Print Director - Access denied

    When I print out  a document or a fax, after each page of print I get a blank page followed by the next page of the print or the fax. I tried changing the Print Director but I get a message "access denied". Has anyone experienced this and resolved it?

    Hello lightweight,
    Welcome to the HP Support Forums!
    Sorry to hear about the software issues you have been having with the Photosmart C410a on Windows 7. I would like to see if I can help.
    Below are the first steps I would like you to try;
    Click the start menu and then type %temp%
    Look for, and open the folder starting with 7z (Example: 7zS0007)
    Open folder Util
    Open folder CCC
    Run the uninstall_ L4.bat for non-HP computers. For HP computers, run the Uninstall_L3.bat
    When the uninstall has completed restart the computer
    Run Disk cleanup from Accessories> System Tools and check all boxes.
    Download and install the latest version of Adobe flash player: Adobe Flash Player
    Download the full feature software and drivers: HP Photosmart Full Feature Software and Drivers (if you need to download the software again)
    Run the download to reinstall the printer
    Let me know if you still having the issues.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Error 9672 when adding wireless HP printer

    I am trying to add a HP 1315 printer for wireless printing through a Airport Express. I am using a MacBook Pro. Each time I attempt to add the printer, I receive a "error -9672". I am using the most uptdate HP driver downloaded from the HP site. The computer prints without problem when connected with the USB cable. Thoughts?

    Nugen!!!
    I could kiss you!!!
    After almost 24 hours struggling (including a 40 minute phone call to Apple support), your post got my HP psc 1110 working over my new Airport Express, many many thanks!!!

  • Error 9672 when adding USB printer with bonjour

    I cannot get the printer to be added. Everytime it says an error occured #9672.
    I have done all the suggested options to get the printer to add. It is recognized in the add list, and does everything up to adding it to the network, but the error pops up.
    I have updated airport extreme to the newest version.
    macbook pro   Mac OS X (10.4.9)  

    What is the printer make & model that you are connecting to the USB port of the AirPort Extreme Base Station (AEBSn)?
    You may want to double-check this iFelix site to see if it's compatible with the AEBSn.

Maybe you are looking for

  • Number Ranges consideration while Data Load

    Hello team we are upgrading from 4.6 to ecc 6.0. abaper is gonna try test load..I already configured number ranges in new system with respect to what is in 4.6. should the number ranges be deleted before the data load tesing? How will the system reac

  • XML file considered "Unknown File Type"

    Hi, I have XML files that lack an XML declaration. Part of the import process, though, is an XSLT stylesheet that adds one through standard XSLT output (ie, omit-xml-declaration="no"). However, Frame still decides that it is an unknown file type and

  • Idoc -  message type to maintain infotype

    Hi. Please, anyone knows the message type to maintain infotype? Regard Angela

  • Jtable - disable mouse selection

    hello, i did like to disable row selection in a jtable by mouse. in fact, the user should not be able to select rows in the table, but programmatily it should work. any ideas? thank you greets lukas

  • About RSCRM_BAPI transaction

    Hi i am about to run a query using Transaction RSCRM_BAPI. The Extract will be stored as CSV file in Application server. But the process is running over two hours but still is not completed. Can any one help in this regard...