Error 8191 while creating replication on TimesTen 7.0.1

Hi!
I am trying to create a simple replication scheme, details of replication scheme are as follows:
create replication testuser1.repscheme1
ELEMENT e TABLE testuser1.reptest
MASTER RepTestSpider on "138.227.229.158"
SUBSCRIBER RepTestDev on "138.227.229.64";
I saved the above text in an repscheme.sql file ... the table reptest is created in DataStores on both machine.
Executed this statement
ttIsql -f repscheme.sql RepTestSpider
ttIsql -f repscheme.sql RepTestDev They are executed succesfully
When I Execute
ttAdmin -repStart RepTestSpider Enter password for 'testuser1':
RAM Residence Policy : inUse
Manually Loaded In Ram : False
Replication Agent Policy : manual
Replication Manually Started : True
Oracle Agent Policy : manual
Oracle Agent Manually Started : False
ttAdmin -repStart RepTestDev Enter password for 'testuser1':
*** [TimesTen][TimesTen 7.0.1.0.0 ODBC Driver][TimesTen]TT8191: This store (REPTESTDEV on DEV4U4EX) is not involved in a replication scheme -- file "eeProc.c" lineno 10893, procedure "RepAdmin()"
*** ODBC Error = S1000, TimesTen Error = 8191
Looking forward for reply.
/Ahmad

OutPut of ttversion
Active (spdt01)
ttVersionTimesTen Release 7.0.1.0.0 (64 bit Linux/x86_64) (tt70:17001) 2007-01-29T21:01:14Z
Instance admin: spider
Instance home directory: /usr/users/spider/TimesTen/tt70
Daemon home directory: /usr/users/spider/TimesTen/tt70/info
Access control enabled.
Standby (dev4u4ex)
ttVersionTimesTen Release 7.0.1.0.0 (64 bit Linux/x86_64) (tt70:17001) 2007-01-29T21:01:1 4Z
Instance admin: oracle
Instance home directory: /home/oracle/TimesTen/tt70
Daemon home directory: /home/oracle/TimesTen/tt70/info
Access control enabled.
Replication scheme
create active standby pair RepTestSpider on spdt01 , RepTestDev3 on dev4u4ex
return receipt
Store RepTestSpider on spdt01 port 21000 timeout 30
Store RepTestDev3 on dev4u4ex port 20000 timeout 30;
ttRepAdmin -dsn RepTestDev3 -duplicate -from RepTestSpider -host spdt01 -uid ttadmin -pwd somesuitablepassword -setMasterRepStart -keepCG
Regards
/Ahmad

Similar Messages

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?

Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

An error occurred while creating a Page Server subprocess.

I am using XI R2 SP5 on solaris.
When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
An error occurred while creating a Page Server subprocess.
I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

checked this SAP Note?
1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
Symptom
When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
"The Page Server is unable to create a child process"
In the syslogs, you see the following error messages:
"An error occurred while creating a Page Server subprocess."
"The function PEOpenEngineEx failed. Reason: Report engine not opened."
"Internal error for dll procreport."
"Unable to load dll procreport."
"Internal Job Server error."
Cause
The following file in the MainWin registry has become corrupt:
bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
Resolution
Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

"An unexpected error occurred while creating a custom installer."

All;
I—and I've seen several others in older posts—have been reported received the error "An unexpected error occurred while creating a custom installer" while attampting to build a customer ARD client installer. My guess is that this is do to a issue related to 10.8.X (10.8.4, in my case) based console Mac but I cannot confirm this. I have verified that there are no outstanding OS, client or application updates or hot fixes, as well.
Has anyone built an successful installer from Mountain Lion-installed Mac? Is there any know workarounds?
Thanks in advance, for any help.

Have the exact same problem.
iMac running 10.8.4
Got through the steps of creating a custom client installer.
if I choose not to customize and just save an installer I don't get the error but it creates a file of Zero bytes in size.
If I chose to configure, when I try to save I get:
An unexpected error occurred while creating a custom installer. Please try again....
Console log reports:
9/1/13 12:32:29.603 AM Remote Desktop[1306]: open on /private/tmp/RemoteDesktopClientInstaller_HEATyAJ5CR/extracted/RemoteDesktopCli ent.pkg/Scripts/RemoteDesktopClient.pkg: No such file or directory
I have tried to save this in several location, with no effect on the error or the information logged, with the exception of the name of the temp directory that DOES contains the file (zero bytes):
RemoteDesktopClient.pkg
Need help with this someone...!
APPLE...I JUST purchase this Applciation for $80.....it just flat out does not work....

HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
Help me Obie One Canobie you are my last hope

I have confused myself with the facts! Started out keeping track of every step and every variable but have sort of lost it as we progress here. First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question. Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option. Then powered down the computerator.
Next started up computerator. Turned Time Machine ON and experienced multiple successful backups! Then I started up a few applications, Mail and Text Edit (but not Safari so far). Had a few more successes. After each backup, I used Disk Utility to verify the backup disk is still OK. This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
Put computer to sleep for the night. Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD! Did a restart and verified the backup disk... OK.
Did a few Sleep-bad, Restart -OK repetitions.
It seems consistent: Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
=============================
Now then, I don't understand everything I know here. Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier). Is there any truth in this?
I may abandon this Seagate thing for something more compatible. What's out there that we know works reliably for us?

Warning to error message while creating a SC

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Use the BBP_DOC_CHECK_BADI.
1. Get the backend message with a getmessage* FM.
2. Check if it's a closed cost center warning.
3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
Regards,
Robin

BO CMC Crystal Reports : An error occurred while creating a subprocess in the processing server. [RCIRAS0603]

Hi All,
I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error while opening the previous instances of the crystal report in BOCMC.
I am trying to run or schedule the report but it is always going to "PENDING STATUS".
(Previously it was resolved after restarting the server. Error : problem in ProcessingServer)
Could you please suggest.
Details :
Crystal Reports 2008
Clarity 13
Server Details:
BO XI 3.1 SP5
OS : Red Hat 6
Patch X11
Symptom
" Crystal Reports 2008/2011/2013 Processing Server fails to create child
processes after applied X11 client libraries security update on Redhat
Linux 6
" "An error occurred while creating a subprocess in the processing server.
[RCIRAS0603]" error occurs when viewing the Crystal Reports in InfoView/BI

Hi Rajeev,
This is a known issue you can refer to below note,
2098659 - "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error occurs after applied X11 client libraries security update on Redhat Linux 6
Regards,
~Shree

An error occurred while creating a subprocess in the processing server.

Hi,
I have developed a Crystal Report using CR 2008 with SAP BW as the datasource. The report is executing fine in CR 2008, but when saved to the BOE, in Infoview it is throwing the following error:
An error occurred while creating a subprocess in the processing server. [RCIRAS0603]
Did anyone face similar issue? Is there any resolution for the same.?
I have deleted the report from enterprise and saved it back, still facing this problem.
Appreciate your help in this regard.
Thanks
Ravi

Crystal Reports processing (CR Page) server is not operational.
There could be many reasons for this.
CR processing server traces will need to be enabled and analysed by support.
You should also be on the latest patch release.
Sometimes following steps help :
1) Stop all of the XI 3.1 processes using the ./stopservers command (ensure they are all down before proceeding)
2) Once all processes are stopped ensure the serverpids directory is empty
<install dir>/bobje/serverpids/
If any files are within the 'serverpids' folder, remove them.
3) Go to bobje/tmp
Remove any MW, .MW, mw, .mw and regss files and/or directories
4) Go to /tmp
Remove any MW, .MW, mw, .mw, and regss files and/or directories
5) start servers back up.
If this doesn't help - you'll need to open a Support Incident

Error message while creating Appropriation Request

Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors         RAISE_EXCEPTION
Date and Time          18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
     situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
     condition "ERROR_IN_STATUS".
     Since the exception was not intercepted by a superior program
     in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
     Transaction SE37 (Function Library). You can take the called
     function module from the display of active calls.
Trigger Location of Runtime Error
     Program                                 SAPLAIA_TOOL
     Include                                 LAIA_TOOLU11
     Row                                     119
     Module type                             (FUNCTION)
     Module Name                             AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 *                TYPE       = SY-MSGTY
    90 *                CL         = SY-MSGID
    91 *                NUMBER     = SY-MSGNO
    92 *                PAR1       = SY-MSGV1
    93 *                PAR2       = SY-MSGV2
    94 *                PAR3       = SY-MSGV3
    95 *                PAR4       = SY-MSGV4
    96 *           IMPORTING
    97 *                RETURN     = ls_return.
    98 *   endif.
    99 *   if not ls_return is initial.
   100 *      append ls_return to return.
   101 *      raise error_in_status.
   102 *   endif.
   103 *
   104 * Füllen der Ausgabetabellen
   105    perform fill_output_tables tables lt_status
   106                                      lt_jsto
   107                                      et_appreq_status
   108                                      et_appreqvarnt_status
   109                                      et_appreq_user_status
   110                                      et_appreqvarnt_user_status
   111                                      lt_objnr
   112                                      lt_objnr_varnt
   113                                      lt_return
   114                               using i_language
   115                                      i_with_text.
   116
   117    if not lt_return[] is initial.
   118       append lines of lt_return to return.
>>>>>       raise error_in_status.
   120    endif.
   121
   122
   123 ENDFUNCTION.

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

HT3275 I get the following message - "Time Machine could not complete the backup." "Unable to complete backup." "An error occurred while creating the backup folder.""

I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
Maxx

Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html

HT3275 Got the message "Unable to complete backup. An error occurred while creating the backup folder."

My time machine backup has stopped working. I received an error message that is not one listed on the support page: "Unable to complete backup. An error occurred while creating the backup folder." I am on a new MacBook pro running Mountain Lion and using a 1 TB Passport drive as a time machine backup. Running DiskUtility finds no problem on the Passport.

See #C10 in Pondini's excellent Time Machine Troubleshooting.
http://pondini.org/TM/Troubleshooting.html

Error 8191 while creating replication on TimesTen 7.0.1

Similar Messages

Maybe you are looking for