Error 9. Cannot restore 4s

Hello,
4s 16GB phone was updated to 8.0.2 and was using for several days. One day phone automaticly restarted and never loaded again: after serveral seconds view of apple logo phone restarted again and this happened all time time. Tried reboot phone but nothing changed.
Tried restore via itunes and also from DFU mode but all times got error 9.
Restore via itunes tried on MacbookPro and iMac (OS were already updated on both to Yosemite) also tried on windows pc with latest iTunes.
Let iTunes download latest iOS and also tried download and choose in restore ipsw manaul. Results always the same.

Error 4005 fix for Windows 7
iOS: Restore errors 4005, 4013, and 4014
iphone restore 4005

Similar Messages

  • I am setting up my Iphone 6 but keep getting an error message "cannot restore backup from Icloud...I backed up my old Iphone 5 just yesterday...Any suggestions?

    During setup of Iphone 6 I keep getting error message "cannot restore backup" from Icloud.  I backed up my old Iphone 5 yesterday.  Is it because of different operating systems? Please help. Thanks!

    Does your iPhone 5 IOS is later than iPhone 6 IOS?
    If true, you need to update your iPhone 6 before you can restore from your backup.
    If not, is iPhone 6 connected to power supply?

  • Error 29 cannot restore phone 4s

    error 29 cannot restore iphone 4s after update to ios7

    Error 4005 fix for Windows 7
    iOS: Restore errors 4005, 4013, and 4014
    iphone restore 4005

  • HT1925 error 1604, cannot restore iPad

    Error 1604, cannot restore!

    Check out this Apple article -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Are you able to restore the iPad from Recovery Mode or from another computer?

  • I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

    I am having iPod classic 120GB Serial Number:8K913VF:2C7
    I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
    How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • 1. nothing synced. 2. the iPod error 1415 cannot restore.

    HELP!!
    My iPod has done this for about a couple months or so now and I can't take it anymore!
    I got the new Lady Gaga album, The Fame Monster. I uploaded it to my PC and it was able to sync all of the songs but the last one. I tried to unplug the iPod then plug it back in but that reallt didn't help at all. So I thought it would be good to restore it and everything would be fine. I restored it and started to resync all of my songs. What happens is that nothing can fully sync and I had to take the iPod in and out and then it ended up saying it couldn't sync so I didn't know what to do. I restored it again and the error 1415 pops up saying that it cannot restore. So, I have a problem. How can I get my iPod to restore and how can I get all the songs to sync on it without having it stop and sync in chunks or mess up again?
    Please help!!

    Just doublechecking, Samra. In the course of your troubleshooting to date, have you worked through the following document?
    [Error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439: Cannot restore or update iPod in iTunes 7 or later|http://support.apple.com/kb/TS1372]

  • HT201210 getting error message cannot restore ipad disk space full ???

    cannot restore the ipad  its locked up and I am getting an error message that says cannot restore ipad disk space full what to do?
    thanks

    Well you are going to have to delete something to make room

  • Iphone Error 1480 Cannot Restore

    So I forgot my password to my iphone, and cannot restore. When I try to restore, it says "error 1480." I'm unsure about what this is and cannot find on the forums what exactly this error is. Please, can anyone help me.

    So I forgot my password to my iphone, and cannot restore. When I try to restore, it says "error 1480." I'm unsure about what this is and cannot find on the forums what exactly this error is. Please, can anyone help me.

  • No matter what I do I cannot restore ipod classic. Ipod is corrupt with unknown error 1439.cannot restore the ipod Have tried all options but . can anyone help?

    I recently bought a second-hand ipod classic.  When connecting to itunes the message reads that the ipod is corrupt and needs to be restored to factory settings.  However, this does not solve the issue and I get the message saying unable to restore, unknown error 1439.  No matter what i have tried through apple support i get the same result.  My computer runs Windows XP but I have also tried on my laptop which operates Vista and still no joy.  Anyone able to solve this one?

    Normally unknown error is due to timeout, cause by
    connected to slow USB port at the front of the PC, or using USB Hubs - Better connect to the USB HUb at the back of the PC. (Some Laptop, has only one High Power -USB2.0 port
    USB resource low, due to sharing of other USB devices - Disconnect all other USB devices when Restoring.
    Winsocks conflict with iTunes - Disconnect Internet and Stop firewall and Antivirus, emails apps.
    Your hardisk is dying, read this earlier post by tt2.
    https://discussions.apple.com/message/17776595#17776595
    This wont solve your problem. but is very helpful in troubleshooting.
    It would also help, if you can state
    Which version of iTunes are your running?
    What is your iPod software version as shown in the iTunes summary page?
    Have a nice day!

  • Error -23: cannot restore or update my ipod nano...

    hey there ... got me a new ipod nano 2. generation about a month ago and tried to update its software but it always appeared a message like " an unknown error (-23) occured while trying to load the new software ..."
    did anyone out there have the same problem and managed to solve it? i only read somewhere that it's an open system error or so... don't know!
    i appreciate any help thx and sorry for my english i'm german....
    Ipod Nano 2. generation 8gb     Windows platform

    same here, no solution yet

  • Ipod can't mount error, and cannot restore it even in hard disk mode

    OK, so i've had my 5G ipod about a week now, no joke, got it on my brithday on the 24th of April. the first thing i did was update it's firmware and yes i have the newest itunes and quicktime installed on my pc.
    i've got to say i've had a lot of freezes during video playback and had to restart it a few times, it happened once again today, and upon restarting i got the go to http://www.apple.com/support/ipod along with the folder image. since then i've never been able to start it up properly, and i can get it into disk mode or connect it to the computer and its recognised on the USB, but i noticed the images on the ipod are the black and white ones, and it's not in colour.
    i triedto restore it, but no luck, it says 'ipod can't mount'. i put it in disk mode and then tried to open it through my computer and it says it's not formatted, so i try but it doesnt let me and says theres nothing connected.. i check the disk management in windows xp, and it shows up as "unreadable" and not in the partitioned and formatted disks list. i have absolutly no idea why this has hapened, and i've tried everything i can think of to fix this.
    i will most likely take it back to the store and get a replacement within a week, but i'm just wondering if anybody has any experience with this problem or something similar? i've read about somebody popping it open and disconnecting the battery, but since i'm only a week into it, i'm not gonna bother with this in case it could void the warranty..
    so yeah, unless anybody has any ideas i'll take it in as soon as possible..
    any suggestions appreciated thanks
    P4 1.4Ghz   Windows XP Pro  

    i took it in, and they said they will replace it on the spot if i bring it back in the box.. so that's what im doing today.

  • HT1766 How do I resolve the error "iTunes cannot restore backup because there is not enough free space on iPod"?

    I have an iPod touch 4th generation 8gb and im having a time zone issue on it, so I just backed up and I want to restore from backup. When I try to restore from backup it tells me that there is not enough space on  my ipod to restore backup. I have 687 mb free, how much space does it need? I dont want to restore then restore from backup in case something goes wrong like this and I have to start all over. Id rather have the time zone issue than an empty ipod. How do i resolve this? please help!

    Try moving/deleting from your iTunes libary apps and music which were on the iPod when the backup was made. When selecting apps,select the ones with app data that you can lose.

  • TS3694 error 2001 cannot restore iphone

    help

    In the article you posted from it tells you what causes error 2001 and tells you what steps you can take to try and resolve the issue.

  • Error 1013, cannot restore my iPhone 4 after update new version 4.30

    Any advice please!
    Thanks!

    Well, another case of hurting the good, while trying to go after the bad. What the issue is apparently Apple put in a check point feature around version 4.2.1 that checks for users who are redirecting their connections to gs.appl.com. If the itunes process suspects this, your phone firmware management process stays in recovery mode. You get error 1013 which says you have a hardware error and list numerous hardware related things for you to check. So my iphone sat on my dresser for two months under the belief that I had a hard ware issue. Well the fact of the matter is that there was nothing wrong with my phone. Apparently there are users who jail brake their iphone to run other apps, and for those users, they have an entry in their hosts file that redirects gs.apple.com to a website that is set up to assists jail break users. all this not endorsed by apple. The checkpoint feature that apple put in to detect this uses a timer and waits for a response between your system and gs.apple.com. If the timer threashold elapses, an assumption is made that you are redirecting your gs.apple.com connection, and are a jail break user. Your phone gets put into recovery mode. Problem with this is that there are ligitimet users who have host files that are ligitemt and does not redirect their connections to gs.apple.com. In my case I use a 60,000 line hosts file to redirect adware, malware, and other vulnabilary type sites. The lenth of time for my PC to search thru this file exceeds the threashold period involved in the checkpoint process, and even though the gs.apple.com entry does not appear in my hosts file, an assumption was made that I was a redirection of gs.apple.com user, and my phone was put into recovery mode. to fix my problem I tempoaryily used the default hosts file of
    Host Database
    localhost is used to configure the loopback interface
    when the system is booting. Do not change this entry.
    127.0.0.1 localhost
    255.255.255.255 broadcasthost
    I have no reason to prevent my system from talking to gs.apple.com. It just takes a little longer to do so. There are thousands of iphone users right now who have iphones locked into recovery mode, probably because they are on a slow internet connection and their threashold is being exceeded. These folks are innocent victims of of the pursuit of the jail break users. Apple needs to figure out another way to do this with out impacting loyal customers. Apple. shame on you.

  • TS3694 MY IPHONE 4S WON'T SWITCH ON APPLE SIGN JUST KEEPS FLASHING,TRIED RESTORING IT THROUGH ITUNES BUT SAYS ITS IN RECOVERY MODE AND UNKNOWN ERROR SO CANNOT RESTORE CODE 3194

    MY IPHONE 4S WONT SWITCH ON THE APPLE SIGN JUST KEEPS FLASHING ITS 4 MONTHS OLD AND HASNT BEEN DAMAGED HAD ABOUT A QUARTER OF CHARGE AND JUST WENT OFF TRIED RESETING BY HOLDING HOME AND LOCK KEY, NO LOOK, TRIED DOING IT THROUGH ITUNES, IT SAYS ITS IN RECOVERY MODE AND WILL ERASE ALL DATA AND RESET, THEN SAYS IT CANT BE BECAUSE OF AN UNKNOWN ERROR CODE3194, PLEASE HELP!

    Stop using caps then I'll read your post.

  • Cannot Restore iPad2 - Error Code 3173?

    Never had an issue with an Apple product before.
    Windows 7 Home Premium
    iTunes 10.5.0.142
    iPad 4.3.5
    Attempted to update iPad software to 5.0 and got the error code "cannot restore iPad - error code 3173"
    Freaked out and disconnected the iPad and it seems fine, no data/information loss and it DID NOT update as it is still running version 4.3.5.
    No other external USB ports in use, never had an issue updating previously.
    Thoughts/ideas/fix?  Seems like a lot of people are posting asking for help with this but I don't see a fix anywhere.

    Good idea. I wish I had waited. My iPad2 will not Restore so it is hammered. My iPhone 3Gs is updating now so we'll see. But this is definately an Appple problem as all 5 devices at our house had one issue or another. My iPad2 fails with the unrelated error 1162. The USB driver does not install. For my iPhone 3Gs, the USB driver installed and the update is nearly complete. Oh, it's backing up now. I'll just have to see if it works but it is going much better than our iPads. The iPads seem to be the big issue.

Maybe you are looking for

  • P45 Platinum will not boot Server 2008 with 2x2GB...

    I was working through the night last night to get my new rig built and installed with the new SP2 of Server 2008 and was having problems that seem to point to the mobo not liking the optimized settings for my 2x2GB.  Hopefully my signature has all th

  • Insight / tk/tcl error in arch " insight gui for gdb doesn't work"

    I just compiled insight package on arch linux perfectly and when i try to run the software, i get the following error. 1. i get the same error while using tk8.4 and tcl8.4 2. then i upgraded to tk8.6 and tcl8.6 using pacman, and i still get the same

  • My blackberry keeps tuning off

    Whenever i listen to music my phone just turns off. the screen either goes white or black and now it wont turn back on at all ive tried taking the battery out but it just loads for a few seconds then turns off again. help!!!!!!!!

  • Data log rate of Counter Period acquisition

    I'm measuring and recording the period of a digital input pulse train (input to NI9421 card on a 'C' series DAQ chassis and recorded via LabVIEW SignalExpress 2009).  The 'Counter Period' acquisition step is configured to use '1 Counter' measurement

  • How to add BOR link to SAP Mail document

    I would like to use "WF Program Exit" class to add a BOR object to an existing "Send Mail" without a big re-write. I have the Sales Order # on an Send Mail step and want to add link on this message to open the Sales Order. Simple snip of code, like S