Error 9 on iPhone 4s (iTunes 10.5.3)
Connected my most recently purchased iPhone 4s to iTunes. Accidentally, iPhone was disconnected from MacBook during the process of transferring purchases. iTunes then required to restore the phone
However, all attempts to restore iPhone almost immediately led to Error 9 message. I have tried everything advised by Apple (see below) but all in vain.
The situation is complicated by the fact that the nearest Apple Store is 2 th.km from where I live
What can be done to resolve this issue? Would highly apprecite any advice!
Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Repair your Apple Software Update
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All Program, go o Control Panei, Add & Remove Programs.
Similar Messages
-
On connecting my iphone 4S to itunes I am unable to add any music from my itunes library and get a message saying it is already synced with another itunes library on the same computer. As far as I am aware I only have one itunes library on the computer. Does anyone know how to fix this error please?
iPhone and iTunes software fully up to date.
Thanks!iOS: Device not recognized in iTunes for OS X - Apple Support
-
I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?
You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.
-
I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?
Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors -
I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iPhone 5 won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do? Using iTunes 12 is not an option. Many features I used for audiobooks have disappeared.
The version immediately prior to 12 was 11.4.0.18. Here are direct download links from Apple's servers:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2 -
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
How can i sync my iphone with Itunes cuz I do it and it says error
how can i sync my iphone with Itunes cuz I do it and it says that there is an error?
Is it posible that there is something wrong with my IPhone?Hello, I had this problem A few times. But there isn't A way I know. Keep the music on your computer and add them back after is what I do.
-
How to pass error message when restoring iPhone on iTunes?
I am trying to restore my iPhone on iTunes. But since I have update my MbP to OSX 10.8.2 I can not get passed an error message on iTunes after it is done extracting the software and is contacting iTunes. I have wifi and everything works fine. I heard it could be a host issue, but I have no idea how to fix it? Any help would be appreciated.
Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
USING g_t_bdcdata
MODE g_l_mode
UPDATE 'S'
MESSAGES INTO g_t_msg .
errors will be stpored in the table g_t_msg ..
Thanks . -
I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G
Try this and see if this helps http://support.apple.com/kb/TS3694#error1015
-
When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone" How do I fix this?
I had the same problem. I found this site http://itprokb.blogspot.com/2010/10/itunes-could-not-sync-calendars-to.html
It worked for me. Good luck! -
Syncing new iphone 5 with a Mac with itunes 10.6.3. Error message says iphone cannot be used because requires itunes 10.7 or later. Unable to download Itunes 10.7 to Mac. What do I have to do to import songs from Mac to new Iphone 5 ?
iOS 6 (which runs on the iPhone 5) requires iTunes 10.7, which requires OS X 10.6.8 or higher.
Upgrade OS X on your Mac. -
I am trying to download ios 5.1.1 on my iphone from itunes and i get an error message that my iphone cannot be updated because the filmware is not compatible? What do I do?
iOS 5 is only compatible with the iPhone 3Gs and later...
Updating to iOS 5 http://support.apple.com/kb/HT4972 -
I tried to update software on my Iphone 3 from Itunes after i managed to sync phone to laptop but then i had a message (error 1015) after completing saying itunes has detected an iphone in recovery mode, i am now unable to do anything with my phone, please help!!
You generally get that error code on a jailbroken phone ?
If it is Jailbroken then I am afraid you will get no help here. -
In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.I have same error except that i get it even when my phone is not connected.
-
I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!
Maybe you are looking for
-
hi there... 1) firefox has been giving me problems for several months where it just stops responding, meaning I click on one of the 5 tabs open then it gives me msg "firefox not responding", also happens when I am working with xsitepro website builde
-
A Link with parameters to another page in a report
Hi, I need to pass a link to another page with parameter, all in a report - But I can't use the column link because I already use to another link. Help!!
-
Backend exit in Purchase Requisition creation from SC in SRM
Hello, could please someone tell me which exit can be called in R/3 backend system during the creation of a Purchase requisition created form a SC in SRM? Thanks a lot. Guido
-
Can I make a video with Powerbook Pro
can I make a video using camera on Powerbook Pro
-
Comparision of Measures in BO Explorer
Hi, Wats the maximum number of measures that can be compared in BO Explorer.... Currently im able to select only 3 measures max , to compare among themselves.. How can this be increased to view more measures at a time.. Thanks in advance. Regards, Ni