Error 9 reading message database during Expire Maintenance

I have scheduled maintenance to perform an expire on my post office
Processing information for this run:
Path to PO = servername/mail:\groupwse\wcicc_po
Post Office= WCICC_POST
User = All
Action = Expire
Age Limit = Thursday, July 1, 2010 - 8:00 pm (60 days)
Trash Limit = 15 days
- Exp items = mail, calendar, doc refs, Inbox, Outbox
Verbose = Yes
Upd DiskSpace= No
Output log = servername/mail:\groupwse\wcicc_po\wpcsout\chk\gwexpire.log
I keep receiving the following error
================================================== ==============================
===== TASK LOG - 1305 (4c7c134e.ckl) ===========================================
================================================== ==============================
Checking for items matching purge criteria
Error 9- MESSAGE database read error BAD_IX (0xC00E)
Suggestion- Check physical consistency of database, rebuild if errors found
PROCESSING COMPLETED- total processing time: 0:00:00
================================================== ==============================
===== JOB LOG SUMMARY (4c7c0dcd.ckl) ===========================================
================================================== ==============================
*** User databases found: 1049
*** Total bytes reclaimed: 37799936
*** Average per database: 36034
Processing completed
***** OVERALL STATS FOR THIS RUN *****
Uncorrectable conditions encountered:
CODE DESCRIPTION COUNT
9 Errors reading message databases................... 1
Correctable conditions encountered:
CODE DESCRIPTION COUNT
39 Unrecognized or invalid files in mail directories.. 2
66 GWCheck log files in log directory................. 1
What message databse is this?
The previous lines show that msg254.db processing completed without errors. When I look in ofmsg directory, 254 is the last message database.
Thanks for any help.

lfeltswcicc,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Ora-19870 error reading backup piece during installation

Hi,
I am trying to install oracle10g database on windows.
i am installing database software and database together and i keep getting this error half way throu installation.
"ora-19870 error reading backup piece during installation"
how can i solve this.
Can someone help me please.
Thanks,
Philip.

Hi,
sorry man. i still have that problem.
i could not find any solutions so far.
if i find any i will let you know.
but for now i have decided to install in another PC.
Philip.

Error Out Message - database Connection

Hi there
I need your help. I just got this error out message when i create a table using MS Access database.
NI_Database_API.lvlib:Conn Execute.vi->NI_Database_API.lvlibB Tools Create Table.vi->Untitled 3<ERR>ADO Error: 0x80040E14
Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition. in NI_Database_API.lvlib:Conn Execute.vi->NI_Database_API.lvlibB Tools Create Table.vi->Untitled 3
I am a be gainer to lab view data, what should i do to solve this problem ???
Rd
Ganesan
Solved!
Go to Solution.
Attachments:
Database.vi ‏17 KB

CPUT wrote:
Hi there
I need your help. I just got this error out message when i create a table using MS Access database.
NI_Database_API.lvlib:Conn Execute.vi->NI_Database_API.lvlibB Tools Create Table.vi->Untitled 3<ERR>ADO Error: 0x80040E14
Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition. in NI_Database_API.lvlib:Conn Execute.vi->NI_Database_API.lvlibB Tools Create Table.vi->Untitled 3
I am a be gainer to lab view data, what should i do to solve this problem ???
Rd
Ganesan
As you were told at http://forums.ni.com/t5/LabVIEW/what-error-is-this/td-p/2028382
the way to solve this problem is to learn SQL
This is not a problem with LabVIEW.

Ways to put application in Read Only mode during monthly maintenance

Hello,
We have a situation where during monthly maintenance phase for 2-3 days i need to put the application in Read only mode. We already have dimension level security applied to each user but even to those users who have the write access to some members on the data forms etc, the application should just be read only during that time so that no users can enter any data.
From what I know putting the application in maintenance mode all the users will be locked out which is not what we want. The users should still be able to see the dataforms, reports etc. So, please let me know your ideas on this.
Any ideas are appreciated.
~ Adella

The same question was asked the other day - How can i make a application as read only ?
Cheers
John
http://john-goodwin.blogspot.com/

Unexpected symbol error in messages.xml during sapinst AS Java install

I am installing an application server JAVA on Redhat linux inside the DMZ for our ESS portal internet facing web app server. I downloaded the media and ftp'd it to the Redhat x86_64 server, and are now running sapinst to install it.
When starting sapinst as root, I get the following message:
ccerpprod17u# ./sapinst
[==============================] \ extracting... done!
MessageLib: ERROR: error: unexpected symbol: '</' entity=file:///51033511_8_Master/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/messages.xml in line 9333, 71
Starting GuiServer using:
/usr/java/j2sdk1.4.2_19/bin/java -Xmx256M -Djava.security.egd=file:/dev/urandom -cp /tmp/sapinst_exe.2279.1248128583/JAR/instgui.jar:/tmp/sapinst_exe.2279.1248128583/JAR/inqmyxml.jar SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
MessageLib: ERROR: error: unexpected symbol: '</' entity=file:///51033511_8_Master/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/messages.xml in line 9333, 71
init: retrieving account information for group sapinst...
init: retrieving account information done.
MessageLib: ERROR: error: unexpected symbol: '</' entity=file:///51033511_8_Master/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/messages.xml in line 9333, 71
load resource pool /51033511_8_Master/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/resourcepool.xml
ERROR 2009-07-20 15:23:05.958 [iaxxctoplvlrdr.cpp:79]
I re-copied the files from windows to unix just in case it got corrupted in the transfer but get the same message. Any ideas?

Hi John,
Have you checked message.xml file on line 9333 for some garbage symbol ?
Thanks
Sunny

Selecting a link under Illustrator's "learn essentials"tab produces an "Internal Server Error - Read" message

All of the links under the Illustrator Lean Essentials tab open an error page. This is what I get on the page for all of the links

The links are working for me. You might try a different browser.

Global ATP - Error Reading ATP delta records message During Sales. Ord. Cre

I am getting a messge "Error reading ATP records" during sales order creation and also when displaying the ATP tab from teh Product view or running any ATP relevant transaction in APO? Does any one know what this error is and how to fix this?
Thanks
venkat Jupudy

Hello,
You have not provided which are the GATP related settings you done.
May be CIF is not happing properly.
FOr GATP check following link for more details
https://wiki.sdn.sap.com/wiki/display/SCM/APO-GATP

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Trying to re install Photshop elements6 on my new computer. Error message reads Installer database is corrupt

Trying to re install Photshop elements6 on my new computer. Error message reads Installer database is corrupt

Rainstormn please see Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 4 or point product for information on how to resolve your current error. In the future please only transfer your documents and settings to your new computer. You can then install any needed applications.

I just tried to update my iPhone4 to iOS7 and after downloading, I got an error "4005" message; Now my iPhone is completely wiped out and I can't even get my pc to read it (just has a picture of the USB and the iTunes icon). HELP!!

I tried updating my Iphone4 from iOS 6.1.4 to 7 via iTunes. After downloading, I got an error 4005 message during installation and now my phone is completely wiped out; is not being recognized by my PC; and all I get on the phone is a photo of a USB plug and the iTunes symbol! Can anyone, PLEASE, help?!?

The phones in recovery mode so if yu connect it to itunes it should ask to restore it back to the last back up you have done.
that should solve it for you...

Error during Mass Maintenance of Material Master

Dear All SAP guru,
During mass maintenance of order unit ( PCS) and variable order unit "1" (Active) from T-code MM17, system is giving one error message.
Error Mess: 30000052280140 : Messages have been issued: number MASS000120000000 and notification No.:
MK101.
While system allowing automatically to log through MM90, but after puting the log no.: MASS000120000000, system is not execting.
Pl suggest ....as conversation factor is also maintained in material master for this.
Regards,
Pinku.

HI ,
check note 487111.
According to this note
Symptom
In the planning data mass maintenance (MPGD_MASS), you select the "Conversion" field (UMREF) and enter the new value e.g. '2,01' and save the change. In the log of the mass maintenance, the system issues error
MK101:
....... : Messages have been issued: number MASS............
Detailed display of error message:
Message number BF 020
Value cannot be interpreted as a floating-point number. Other terms
Reason and Prerequisites
The problem is caused by a program error.
The symptom occurs if during the maintenance of your own user profiles, you defined "Comma" for the decimal notation (Transaction SU3).
Due to a program error, the system saves the value of the field to be changed program-internally in the exponential display with "Point" as the decimal place (2.01E+00).
Solution :
You have implement the solution mentioned in the note .
Regards,
Anupam

Error message (M3024) during parallel goods movement

For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.

HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems.

Cannot uninstall Adobe Reader 7.0.8...keep getting "Error 1402" message..

Hello. I use Windows XP Home Edition. I am trying to uninstall Adobe Reader 7.0.8 so I can then install version 9, but I am not able to uninstall 7.0.8. During the uninstallation process, I get the following error message:
*****Error 1402. Could not open key HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{C523F39 F-9C83-11D3-9094-00104BD0D535}\Programmable.
Verify that you have sufficient access to that key, or contact your support personnel.*****
I went to another forum and asked for some help there...the guy there gave me some steps to follow, and I did so. Here they are:
1. Deleted "Adobe Reader Speed Launch" shortcut from Startup folder.
2. Deleted the Adobe folder (which contained 2 other folders: Acrobat 6.0 and Acrobat 7.0) from C:\My Computer\Local Disk\Program Files. I had to use a separate program (provided by my helper who gave me these steps to follow) called "Unlocker" to accomplish this, since, originally, when I tried to delete this Adobe folder, I would get a message saying "Cannot delete pdfshell.dll: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." Unlocker solved this problem, and was able to delete the Adobe folder.
3. Rebooted machine
4. Ran CCleaner's registry cleaner
5. Rebooted machine again
6. Tried using CCleaner's "Uninstall" utility to uninstall Adobe Reader 7.0.8. When I tried this, I got the same "Error 1402" message as listed above.
7. Backed-up my registry
8. Tried to just delete this particular offending key using RegEdit...but when I tried, I got a message saying this:
*****ERROR DELETING KEY
Cannot delete Programmable: Error while deleting key.*****
I really need some assistance with this...at the moment, Adobe Reader 7.0.8 still seems to be installed on my machine (it's still listed in "Add/Remove Programs" in the Control Panel, and it still shows up in CCleaner's Uninstall Utility)...despite the fact that, as I mentioned above, I used Unlocker to delete the Adobe folder from Program Files. Also, at this moment, no pdf files will open on my machine...so this is quite an urgent situation. Does anyone know what else I should do now? Is there something I need to do regarding the "Permissions" for this particular registry key?
I appreciate anyone's assistance...thanks.

Hi..I went ahead and ran the Windows Installer Cleanup Utility. I used it to remove "Adobe Reader 7.0.8." After doing this, I checked in "Add/Remove Programs" in the Control Panel to make sure that AR 7.0.8 was gone, and it thankfully was. Then I deleted the WICU, ran CCleaner's registry cleaner, rebooted, and tried to install Adobe Reader 9.0. When I tried this, I got the following error message (this occurred during the time when the installer was "writing system registry values"):
*****ADOBE READER 9 INSTALLER INFORMATION
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{C523F39 F-9C83-11D3-9094-00104BD0D535}\ProgID.
Verify that you have sufficient access to that key, or contact your support personnel.*****
What should I do now? Do I need to do something about the "permissions" for this key?
Thanks to anyone with advice...

Error opening the database for the library "~/Pictures/Aperture Trial Library.aplibrary" error message

When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
Jim

Hello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie

I am trying to download the mountain lion software which I purchased and downloaded successfully in my air book, in to my desktop and I get an error 403 message saying that an server error ocurred during downloading

I am trying to download the mountain lion software which I purchased and downloaded successfully in my air book, in to my desktop and I get an error 403 message saying that an server error ocurred during downloading

Implies that the DL is hosed and necessitating DLing it again.

Error 9 reading message database during Expire Maintenance

Similar Messages

Maybe you are looking for