Error 9006 problem *** cant restore

I'm trying to restore my iphone because my phone is disabled cuz of the password but everytime i restore in DFU mode in couple of minutes it says error 9006 any walkthroug

http://support.apple.com/kb/ts3694#9006
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.

Similar Messages

  • TS3694 1656 is my error code i cant restore my iphone or update please help

    1656 is my error code i cant restore or update my iphone please help

    Follow the steps mentioned in this thread.
    https://discussions.apple.com/thread/2778443?threadID=2778443&tstart=0

  • HT201210 my apple iphone wont get out of recuvery mode and when i restore it, it gives me an error message saying cant restore. i need help.

    i cant restore my apple iphone and it is stuck in recuvery mode and i dont know what to do

    If you can't restore it in recovery mode then you'll have to try DFU mode to restore it (see
    https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0 or http://www.iclarified.com/entry/index.php?enid=1034).

  • My iTunes says there is an error and i cant restore my iPod

    iTunes says there is an error saying "a required iTunes component is not installed. Please repair or reinstall itunes (-42404)" i ran a diagnostic....
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 EX402AA-ABA A1445N
    iTunes 10.5.2.11
    QuickTime not available
    Apple Application Support 2.1.6
    iPod Updater Library [Error:0000000D]
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    Also i cannot restore my iPod

    nevermind I got it to work, my cord wasn't connected properly. thanks for trying to help though!

  • HT201210 error 9 i cant restore my iphone 5c

    i am connecting my 5c and suddenly its hacked and the apple logo is bulbing now i am not able to use bcoz itss gng to recovvery mode
    now i am trying to restore than its not restoring and the ERROR 9 come i had turn off fire wall , proxy ,and my antivirus also but still ERROR 9 is persisting and i am not able to restore my iphone 5c

    thanx allen,
    i have another question also that sometime while i tried to restore my 5c more than 5 times than it looks like apple logo with line below the logo and i think its start restoring but the processing line does not come to increasestill 1hr and my iphone could not getting restored and the restoring process is noton going its just stick there and itunes appearing like WAITING FOR IPHONE means i phone is not able to restoring and i am dissconnect it and tried second time than erro comes ERROR
         this type off picture persist in my 5c and the processing line below the logo is persist but the restoring process could not be accelerate

  • Cant restore iPod with updater 3-23-2006

    updater doesnt recognize my iPod or says error and therefore cant restore the iPod (nano)

    I have a Gateway 7215GX and running Windows XP Home edition, I have the latest version of iTunes. I had just got my nano a couple days ago and had plugged in the iPod nano i had previously had a mini but broke now i plugged in the nano and updater recognized it the first time to update the ipod from 1.1 to a 1.1.1 and now im trying to restore it to see if iTunes would recognize it now.

  • Cant restore Iphone 3G after failed install of OS 4

    Hi ppl, I tried to update my iphone 3G with the new OS4. I downloaded and installed the new itunes 9.2 beta along with os4. The initial setup went well but the I had an unknown 2006 error along with this code.
    2010-06-15 18:06:51.000 iTunes[246:20b]: restore library built Jun 4 2010 at 01:46:12
    2010-06-15 18:06:51.000 iTunes[246:20b]: iTunes: iTunes 9.2f1
    2010-06-15 18:06:51.000 iTunes[246:20b]: iTunes: Software payload version: 7E18 (option key)
    2010-06-15 18:06:51.000 iTunes[246:e71f]: iTunes: Specifying UOI boot image
    2010-06-15 18:06:51.000 iTunes[246:14f23]: iTunes: Specifying UOI boot image
    2010-06-15 18:06:51.000 iTunes[246:14f23]: iBoot build-version = iBoot-636.66.33
    2010-06-15 18:06:51.000 iTunes[246:14f23]: iBoot build-style = RELEASE
    2010-06-15 18:06:51.000 iTunes[246:14f23]: DeviceRequest failed: 0xe000404f
    2010-06-15 18:06:51.000 iTunes[246:14f23]: command device request for 'getenv radio-error' failed: 2008
    2010-06-15 18:06:51.000 iTunes[246:14f23]: radio-error not set
    2010-06-15 18:06:51.000 iTunes[246:14f23]: no variant specified; authinstall is disabled
    2010-06-15 18:06:51.000 iTunes[246:14f23]: unable to open device_map.txt: No such file or directory
    2010-06-15 18:06:51.000 iTunes[246:14f23]: <Recovery Mode Device 0x188434c0>: production fused device
    2010-06-15 18:06:51.000 iTunes[246:14f23]: <Recovery Mode Device 0x188434c0>: operation 4 progress -1
    2010-06-15 18:06:51.000 iTunes[246:14f23]: bootstrapping restore with iBEC
    2010-06-15 18:06:52.000 iTunes[246:14f23]: <Recovery Mode Device 0x188434c0>: operation 31 progress -1
    2010-06-15 18:06:53.000 iTunes[246:14f23]: <Recovery Mode Device 0x188434c0>: Recovery mode succeeded
    2010-06-15 18:06:53.000 iTunes[246:20b]: device disconnected (isDFU = 0)
    2010-06-15 18:06:53.000 iTunes[246:20b]: _AMRecoveryModeDeviceFinalize: 0x188434c0
    2010-06-15 18:06:56.000 iTunes[246:20b]: device connected (isDFU = 0)
    2010-06-15 18:06:56.000 iTunes[246:20b]: iTunes: SCEP 5
    2010-06-15 18:06:56.000 iTunes[246:144a7]: iTunes: Specifying UOI boot image
    2010-06-15 18:06:56.000 iTunes[246:144a7]: iBoot build-version = iBoot-636.66.33
    2010-06-15 18:06:56.000 iTunes[246:144a7]: iBoot build-style = RELEASE
    2010-06-15 18:06:56.000 iTunes[246:144a7]: DeviceRequest failed: 0xe000404f
    2010-06-15 18:06:56.000 iTunes[246:144a7]: command device request for 'getenv radio-error' failed: 2008
    2010-06-15 18:06:56.000 iTunes[246:144a7]: radio-error not set
    2010-06-15 18:06:56.000 iTunes[246:144a7]: no variant specified; authinstall is disabled
    2010-06-15 18:06:56.000 iTunes[246:144a7]: unable to open device_map.txt: No such file or directory
    2010-06-15 18:06:56.000 iTunes[246:144a7]: <Recovery Mode Device 0x19165000>: production fused device
    2010-06-15 18:06:56.000 iTunes[246:144a7]: <Recovery Mode Device 0x19165000>: operation 4 progress -1
    2010-06-15 18:06:56.000 iTunes[246:144a7]: <Recovery Mode Device 0x19165000>: operation 42 progress -1
    2010-06-15 18:06:57.000 iTunes[246:144a7]: <Recovery Mode Device 0x19165000>: operation 5 progress -1
    2010-06-15 18:06:57.000 iTunes[246:144a7]: <Recovery Mode Device 0x19165000>: Recovery mode failed (result = 2006)
    2010-06-15 18:06:57.000 iTunes[246:20b]: iTunes: Restore error 2006
    I cant restore my iphone 3G to 3.1.3 firmware. It's like the phone is stuck in recovery mode.
    Can anyone help please?
    Thanks in advance
    Muppetboi

    You're in a mess because you installed two pieces of software that have not been released yet and are still in beta. If you were a registered developer(I'm guessing you're not) you'd have access to the developer forums to post your question. You're only solution is to wait until the software is OFFICIALLY released or use google & hope you don't end up making your phone permanently inoperable.

  • After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

    After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

    Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
    Get help with iOS update and restore errors
    If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
    To narrow down the issue, you can try different equipment:
    Use the USB cable that came with your device, or a different Apple USB cable. 
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    Solve other issues with the USB connection, then with your security software.
    If you still see the error message, check for hardware issues by following the next section.
    Check for hardware issues
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • Every time i try to restore my iphone for i get error 9006

    please help cant restore my phone when it trys to download the 7.1.2 ipsw i get error 9006 shortly after it starts

    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.

  • Hi, i cant activate my ipad, i have restored it through itunes but keep getting a error that says cant connect to server but pocket wifi is working for other devices

    hi I cant activate my ipad, I have restored it through iTunes 5 times but keep getting a error that says cant connect to server. Laptop is connected to pocket wifi but I cant get passed that screen on my ipad. Im not real computer literate but would appreciate any help.
    Thank you

    iTunes 5?
    That may be the problem.
    update iTunes
    which iPad is this?   1st generation?

  • After updating my 3GS to ios5 i cant restore, gives a -20 error or says something went wrong or backup is corrupt

    After updating my 3GS to ios5 i cant restore, gives a -20 error or says something went wrong or backup is corrupt.
    did my girlfriends worked fine.

    having same problem, anyone have an answer?

  • Iphone 4S Cant restore error 9

    Phone swithched itself off 2 days now stuck in boot loop with apple logo. I can get into dfu and restore mode but cant restore in itunes. Phone goes through preparing for restore and verifying with itunes then get the apple logo with progress bar it then waits a few seconds then phone disconnects and get error 9 in itunes. Tried on 3 different pc’s different leads and usb ports still get the same error.

    Experiencing exactly the same things, went to genius bar they said could be hardware problem but could not fix anything. Phone is pretty much dead and do not have any backup

  • How to I restore my iPad without getting error 9006?

    I sold my iPad on Ebay, and need to restore it to factory defaults before shipping. Except iTunes will not let me restore. I downloaded the latest software update over the air literally less than 2 hours ago, and it worked with no issues. I thought "wow that was easy, should have tried that before." Yet everytime I try to restore on iTunes, it insists on downloading 7.0.6 again even though the iPad is already running 7.0.6. And it glitches every single time with error 9006. I've tried over 50 times with no luck.
    The iPad has the latest software version, but iTunes insists on downloading it again anyway.
    My iTunes has the latest software version.
    My anti-virus software is disabled.
    My firewall is disabled.
    No ports have been blocked other than defaults.
    It glitches and gives me the error at random points, although at over 50 tries I've never gotten over 350 mb / 1.33 gb done so my chances of just getting lucky are slim to none. This is a serious problem as I sold this iPad and software bugs are preventing me from shipping it. This needs to get resolved. My patience is wearing thin and I assume the person to whom this iPad was sold is feeling the same way. And please don't give me the whole "just try again later" solution. I've tried this at various times during the day and night for days, and it has never worked. Trying again later has failed, and I'm about to be past due on shipping because of this.

    Hello there, ALGroves.
    Great job so far in troubleshooting your issue. If you haven't already, feel free to review the information in this Knowledge Base article that goes over your particular error message:
    Resolve issues between iTunes and security software
    http://support.apple.com/kb/TS3125
    If the issue persists, you can try the information in this article as another option for restoring your device:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    Particularly:
    Before you sell or give away your iOS device, make sure that you've removed all of your personal information. Follow these steps to protect your data and get your device to its factory default state for the new owner:
    Back up your device.
    Go to Settings > General > Reset, then tap Erase All Content and Settings.
    This will completely erase your device and turn off iCloud, iMessage, FaceTime, Game Center, and other services.
    If you're using iOS 7 and have Find My iPhone turned on, your Apple ID and password will be required. After you provide your password, the device will be erased and removed from your account so that the next owner can activate it.
    Contact your carrier for guidance on transferring service to the new owner.
    When the device is turned on for the first time by the new owner, Setup Assistant will guide them through the setup process.
    Important: Do not manually delete contacts, calendars, reminders, documents, photo streams, or any other iCloud data while signed in to your iCloud account, or the content will also be deleted from the iCloud servers and all of your iCloud devices.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • IPhone 6 Error 9006 while Restoring

    Hey other Members,
    I have a IPhone 6 with IOS8 on it.
    Now my Problem: While im restoring my iPhone in Itunes , the Error 9006 appears.
    I tried to deactivate my firewall and my anti-virus program , but it didnt worked when i tried again.
    I got the newest ITunes version aswell.
    Thanks for answers
    Gentik

    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve issues between iTunes and security software
    If you can’t open iTunes, download content, sync your device, or use Home Sharing, you might have an issue with security software.
    What you might see
    Security software created by companies other than Apple can prevent iTunes from connecting to Apple servers. Sometimes, you might see a numeric error message when you sync, update, back up, or restore your device:
    iTunes won’t open
    You can’t connect to iTunes Store to buy or download content
    iPhone, iPad, or iPod touch won't back up, restore, update, sync, or activate with iTunes
    iPhone, iPad, or iPod touch isn't recognized by iTunes
    iPod isn't recognized by iTunes.
    iPod won't sync with iTunes.
    Apple TV won’t restore with iTunes
    iTunes Error 4 or iTunes Error 6
    iTunes Error 1630–1641
    iTunes Errors between 3000–3999. Example: iTunes Error 3004 or iTunes Error 3014
    iTunes Errors between 9000–9999. Example: iTunes Error 9006 or iTunes Error 9844
    Get started
    First try these basic steps to see if they resolve the issue. If they don’t, continue to the next section.
    Set the correct date, time, and time zone on your computer.
    Log in to an administrative user account.
    Get the latest version of iTunes.
    Update OS X or Windows, and update your security software.
    Configure your software
    After you update your security software, configure it to let iTunes communicate through the ports and servers listed here. Configuration steps vary by software, so contact the developer for specifics. Blocked ports are often related to numbered errors in the 3000 range.
    Ports: 80 and 443
    Apple servers:
    phobos.apple.com
    deimos3.apple.com
    albert.apple.com
    gs.apple.com
    itunes.apple.com
    ax.itunes.apple.com       
    Verisign servers:
    evintl-ocsp.verisign.com
    evsecure-ocsp.verisign.com
    Find a more complete list of ports used by Apple products
    . You might also need to configure your security software to allow specific services
    to run.
    Remove your software and proxies
    If your PC or router is using proxy settings, try connecting to the iTunes Store without using an Internet proxy
    . On a PC, you can use the built-in diagnostics in iTunes to test your connections and generate reports
    .If the issue continues, disable or uninstall your security software temporarily, but first note any licenses and confirm you can reinstall the software.
    Restart your computer and try to connect with iTunes again.
    Check your hosts file to verify that it's not blocking iTunes from communicating with the update server.
    When you’re done with these steps, re-install and re-enable your security software to keep your system safe. If uninstalling your security software resolved the issue, contact the developer to help you configure the software to work with iTunes.
    Test connectivity
    If you’re still having issues using AirPlay, Home Sharing, iTunes, or Remote, test the connectivity between the computers or devices in your house. They need to be connected to the same network and subnet.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.

  • Restore software 552 error - cant restore the os?

    this is the 2nd time i had the restore sofware 552 error but this time i cant restore the operating system and have to get hte phone replaced. this hapeend after rebooting after installing a program. last time it was bc i deleted a program. has anyone had this problem?
    www.whatsgoodblog.com
    What's Good is your one stop site reviews about everything.
    http://www.whatsgoodblog.com/featured/how-to-install-beta-os-or-other-carrier-os-on-blackberry-with-desktop-manager-for-mac/

    This software error has occurred on two different BlackBerry Tours, each of which I returned for replacement (I also had to replace a third one because the front face plate was loose). So I'm now on my fourth Tour after purchasing the first one a little over a week ago. Bad part is, I can't even attempt a restore, since I own a Mac and the necessary software isn't available yet. When I went to return the second Tour after getting the error message, I called BlackBerry support and was told to borrow a phone, go to public library, install the software on a PC, call her back, and she'd walk me through the process. This, after informing her that a sales rep was kind enough to have already attempted a full restore using his PC lab top and that the restore that failed to work.
    In any case, as noted at the start of the thread, the problem occurred while installing software from App World (two different applications). Now that my FOURTH Tour is all set up with my "must-have" applications, I won't be installing any additional software in the near future, no matter how important it would be to own. Which means my BlackBerry will never be the 100% useful tool that I bought it for to begin with. I find it rather disturbing as well that installing a small application (from BlackBerry's own app store no less) can wipe out the phone's entire operating system. Even if the phone COULD be restored, it still means hours of updates, reinstalling applications, setting up custom ringtones, etc. (although perhaps this process is easier for PC users).

Maybe you are looking for

  • How to conatant value in F4 & it should be gery out

    Hi.     I need to create a search help for a field . In  seection  method I have given one table. obviously in F4 it will pull all the data from table which we have mentioned in selection method. but I dont want all the data from it.In my search help

  • [SOLVED]How do I get rw access to a vfat partition?

    I need user rw access to my vfat partition how would I go about setting it up. Disk /dev/sda: 320.0 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x19b819b8 Devic

  • Merging of two systems

    what it means of Merging of two BW Production Systems.it is to bring all the BW Objects from Two different BW Production systems  into one Production System,but what exactly it means...can anyone elaborate...ur help is apprecated

  • Extract Data Using SQL Expression

    Hello, I've created a staging table and just realized that I need some new extra fields. Should I create them in the stage or in the target table? I want to use the SQL expression COUNT so to fill these new fields with edited source data, but don't k

  • Write Back Funtionality not working.

    Hi All, I am trying write back functionality which is not working for me...Here is what I did..followed oraclebizint.wordpress.com/.../oracle-bi-ee-101332-write-back-option-budgetingplanning/ - 1) Connection Pool settings default 2) Created a report