Error 9006/When restoring, fails processing file

Hey, I aam trying all I can to restore my iPad mini with iTunes on windows. Half way through the process, SURPRISE! Error 9006 pops up and just says an unknown error has occurred. Please, anyone at all, help!

Hello Jcastellano1,
Thanks for using Apple Support Communities.
For error 9006 when restoring your iPad, it is likely some security software on your Windows PC that is preventing iTunes from connecting to Apple's servers.  Take a look at the link below for troubleshooting this issue.
Resolve issues between iTunes and security software - Apple Support
Cheers,
Alex H.

Similar Messages

  • I am having problem when i am updating my iphone 4 to ios 5 ..it get update n took 50 minutes then at the end when it was processing file ...suddenly an error comes that an unknown error accurred {9006}..please help me..how will i update my iphone 4

    i am having problem when i am updating my iphone 4 to ios 5 ..it get update n took 50 minutes then at the end when it was processing file ...suddenly an error comes that an unknown error accurred {9006}..please help me..how will i update my iphone 4

    Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.

  • TS3694 error 9006 when trying to restore

    error 9006 when trying to restrore

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • TS1538 Why am i getting error 9006 when trying to restore my ipod 5th gen?

    Why am i getting error 9006 when trying to restore my ipod 5th generation?

    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.

  • HT201210 i keep getting error 3194 when restoring ??

    I keep getting error 3194 when restoring ipad help ???

    From 2nd link below.
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
        1.    Install the latest version of iTunes.
        2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
        3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
        4.    Try to restore from another known-good computer and network.
        5.    If the errors persist on another computer, the device may need service.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

  • I am getting Error = 9006 when downloading some Podcasts

    I am getting Error = 9006 when downloading a podcast, Derb Radio on TakiMag, but not other podcasts.  It started occurring recently, about 3 of the last 4. This occurs on both a Windows and Apple machine.  iTunes is updated.  It does not occur with other podcasts.  Then end result is that the podcast does not download.
    I also get a "rebuffering stream" interruption during playback on the computer.

    Hello there, johnsilker.
    The following Knowledge Base article references some great information in regard to the very error you're seeing:
    Resolve iOS update and restore errors
    http://support.apple.com/kb/ts3694#9006
    Particularly:
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Error exists when Admin2 loads same file in BW but loads ok for Admin1. Why

    Hi,
    Why does this error exists when Admin2 loads same file but loads ok for Admin1?
    A u201CCalendaru201D column in a flat file has value 200810  i.e. October of 2008.
    BW Admin 1:
    When Admin1 loads this file, it comes out ok as Calendar Year/Month as 200810 in PSA and the load completes without any error.
    BW Admin 2:
    Now, for the same file, when Admin 2 loads (on his laptop), the load fails and gets the message that, "....  00810 is not plausible..."
    Somehow, it drops the initial 2 from 200810 during the load for Admin 2.
    The suspicion was that Admin 1 had as Default in SU3,
    Date format:  YYYY/MM/DD.
    Admin 2 therefore switched his to the same Date format:  YYYY/MM/DD.
    Yet, the described load problem still exists.
    Any suggestions?
    Thanks

    Hi,
    Yes, it is the same infopackage for the same cube, Admin 1 used to do this load, and is now moving on to a different project, so the only difference is that Admin 2 is now doing the same job from his workstation but everything on the Data Flow is the same.
    In fact, Admin 2 went to Admin 1, after forwarding the .csv file and on Admin 2's workstation, the same file was tested by Admin 2, using the same infopackage, and it loaded without the above problem for Admin 2.
    Thanks

  • TS3694 how do you solve a error 1015 when restoring a iphone from recovery mode?

    how do you solve a error 1015 when restoring a iphone from recovery mode?

    This error is generally exhibited when someone tries to downgrade iOS. See this support document http://support.apple.com/kb/TS3694
    This is the part you are looking for.
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported. 
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • TS3694 error 1015 when restore the software

    error 1015 when restore the software please give me answer

    http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US#error1015
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    Discussing jailbreaking and jailbroken devices is forbidden by the terms of service here.

  • Error message when copying a music file from PC to BB

    I get the following error message when copying a music file. Also I cannot delete any files.
    "Cannot copy. The request could not be performed because of an I/O device error."

    Hello lcoyote and welcome to the BlackBerry Support Community Forums.
    Do you get the error on all media files or just one in particular? From where are you trying to delete files?
    Is your media card formatted? 
    If you aren't able to add/remove media, try formatting the card as shown in KB10527
    If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
    Let me know how you make out
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I receive an error message when submitting a pdf file for conversion to a Word document "... an unex

    I receive an error message when submitting a pdf file for conversion to a Word document "... an unexpected error has occurred..."   - is there a way to overcome this error?

    I received your Scan.pdf sent to [email protected] and had no problem to convert it via Export PDF service. Could you try again?
    Jyh-Jiun Liou

  • HT1414 how do i solve error 1015 when restoring?

    how do i solve error 1015 when restoring ios using itunes?

    You find an answer somewhere else or buy a new phone.
    You can not get help here for a jailbroken phone.

  • Error 1418 when restoring

    when i plug my ipod mini into my computer my itunes tells me it has to be restored becuase it cant be used when in recovery mode. when i try to restore my ipod it has a "unknown error" and wont complete.

    First try updating iTunes to version 7.0.2. as this article explains.
    Error 1418 when restoring any iPod using iTunes 7 or later.
    Here's the iTunes download.
    iTunes download.
    Also, some people have had success trying the fix mentioned here.
    Error 1418.

  • TS3694 Error 3014 when restoring my 3GS. What do I do?

    Error 3014 when restoring my 3GS. What do I do?
    Tried to sync phone. Insufficient space by 100 mb. Removed all audio, same message when syncing, although almost 4 gb free. Backed up to iCloud,  then tried to restore when Error 3014 came up whilst restoring. What next, as restore stops at this point?

    http://support.apple.com/kb/TS3694

Maybe you are looking for

  • HELP! First time connecting to web host. How do I download my site files!!

    Okay! My site is on my web host! I am a little lost since my web host gave me not totally clear directions on how to do this. I had sent him some of my pages including my home page he connected to their web server along with a dating software that wa

  • Moving/Exporting Seeburger configurations/objects from QA to Production

    Hi, I need some expert advise in moving Seeburger configuration objects like splitter adapter,AS2 adapter configurations from QA to Prod. Our scenario is like this , in the Seeburger message splitter we have defined the splitter adapter based on the

  • CrystalReports XI release 2 Downloaded service pack setups don't work

    Hi I am an existing customer using Crystal Reports Developer XI Release 2. I tried to install latest Crystal Reports XI Release 2 service pack5 for windows and it did errored out between the install saying a cab file was corrupted. Tried couple times

  • One Idoc -- One Logical System ?

    Hi everyone,    Right now i'm developed 6 interface using idoc (6 different business process). Do we need create logical system for each interface? Or just only one logical system? If we have success create this interfaces, how to transport this sett

  • Output of Transaction AFAB

    Hi All,          The output of AFAB displays the depreciation details for each line itam and also the summation of the combination of document no and business area. is it any way possible to also display the summation for indivisual business area?