Error:-9672. Epson R800 connected to AirPort Extreme.

Since upgrading to Snow Leopard I can't add my Epson R800 as a printer when it is connected to my AirPort Extreme. I can by USB. When I attempt to add it I get an Error:-9672 prompt. I have searched for a remedy and reason but cannot find anything that solves the problem.
Any ideas?
Cheers.
Message was edited by Angus as he doesn't proof-read well.

Hopefully a photo print test using my X-rite ColorMunki profiles produces the amazing results I got with Leopard.
May I ask how went your attempt to print a photo using a custom profile? My R800 has performed perfectly when tasked with normal paper printing; but abysmally when charged with printing photo files ex-CS4 & Lightroom (far too dark & over-saturated). In fact this occurs with anything using the custom profiles which worked so well under Leopard. As a pro temp, I have resorted to the 'let printer manage' option, which whilst not so accurate, can be made reasonable with a +5 brightness, and -10 magenta correction in the colour control.
Clearly I would like to revert to programme managed printing as soon as possible. Hence my question.

Similar Messages

  • How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

    I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer.  Can anyone help me?  Thanks!

    You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

    May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
    Any suggestions?

    EPSON Stylus CX4800 All-in-One Printer
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

  • Macbook pro connects to airport extreme only 50% of the time

    Hi,
    I have a mac book pro that i use with an airport extreme unit. When the laptop comes out of hibernation it does not connect to airport extreme. I have to put it back to sleep and start for the second time for it to connect. Any ideas on what the problem is?
    thanks!
    MacBook Pro   Mac OS X (10.4.10)  

    Hi Laurent,
    although I was given the advice earlier that I should simply take the machine back to the shop, or call the help centre, I ended up just praying that it would be OK.  A couple of days after I posted the message I think there was an update to download and install, just a regular one from Apple from the Software Update option for the operating system or it may have been one for Final Cut Pro X, and once it installed I never had the problem again, so my prayers were answered.
    It was pretty scary at the time because I thought it must be some hardware malfunction, but because it was resolved through an update it suggested it was a software issue.  Hopefully it is the same with you.
    I'm now running 10.7.2 and have had no recurrence of the problem in many months, thankfully.
    It might have nothing to do with it, but the only other two things that may have somehow caused errors in the system startup (and I doubt these will be "unrelated" to people who know how computers work better than I do, but I feel I should mention them just in case), but I also updated Final Cut Pro X from a glitchy version to version 10.0.2 around the same time, and I also had an application installed which didn't function correctly in OS10.7 called PowerController (a simple app that can start up the computer at a set time and play music from iTunes as an alarm clock) and it was in the group of apps that were set to start at the starting up of the computer.
    Anyway, I hope your problem is resolved as easily.  Pray about it too!

  • IMac connected to Airport Extreme stopped detecting printer

    Can't connect any more printer (Epson Stylus SX125) to iMac through Airport Extreme. Any solution?

    GoldHill wrote:
    USB Backup drive connected to USB port on Airport Extreme. Running system 10.5.5
    On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time!! Anyway all is cool with that.
    My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
    Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
    yes, it should work. hard to say what's wrong. try the following terminal command. it should not be necessary but it should help.
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    One other important thing to mention. At first I plugged my new backup hard drive directly into the iMac with firewire 800. I started time machine and started the backup. I then stopped that backup and plugged the backup hard drive into the Airport extreme (USB port) I then trashed the partial backup folder off the backup hard drive. Is it possible that on the iMac there is still some TM file there pointing to the old original backup file??
    have you emptied trash? you should. the files won't really be deleted till you do. there is one other hidden file but it should not be necessary to remove it.
    Thanks.... any help is appreciated.

  • What hdd to connect to airport extreme

    So I decided to go with the Airport Extreme base, because I already have an external hdd. The power supply for the hdd is usb , but i cannot seem to connect from my laptop to transfer files wiresley. can someone help?

    There are advantages and disadvantages to connecting the AirPort Extreme in normal router mode or in bridge mode in the type of set up that you have.
    Technically, bridge mode is probably the more correct way to set up the AirPort Extreme, but this will likely allow you to "see" other users and their devices in the same complex....similar to what you would see if you were at a coffee place with free WiFi. 
    Although you may be able to "see" other users on the network...and they can see you as well....they cannot access any of your computers or devices unless they have the password.
    If you configure the AirPort Extreme to act in normal router mode, you will be able to "shield" your private network. The downside is that this will likely create what is known as a Double NAT errror. This is usually not serious on a simple network...but the Double NAT error will create issues with online gaming consoles and other interactive type of devices.
    When, you say that you cannot get the AirPort Extreme to work properly....can you provide some more details about what you have tried and the results so far?

  • Apple TV often drops connection with AirPort Extreme and Express stations

    Here's my setup:
    - Mac Pro in basement office connected to AirPort Extreme (802.11n) station via Ethernet
    - AirPort Extreme station running WPA/WPA2 security and 802.11n (b/g compatible)
    - AirPort Express station across basement room connected to stereo expressly for AirTunes purposes
    - Apple TV and MacBook Pro on house ground floor, both connecting to the network via WiFi
    (unless specified, the software and firmware in my devices is all extremely up to date. I write about Apple news for a living so I know when the updates land and install all of them almost immediately)
    Here's what's going wrong:
    Since I have one of the first gen Apple TVs with a 40GB hard drive but a 100GB iTunes library, I use streaming almost 100% of the time. The Apple TV can usually connect to my iTunes library for streaming via WiFi, but if the AirPort Express (a b/g device, mind you) is active on the network, the Apple TV and even my MacBook Pro get booted off the network usually between 12-24 hours, if not 48. Sometimes WiFi seems to work itself out and I can get the MacBook Pro back online, sometimes it even needs a full restart, as Mac OS X will start giving me nothing but "there was an error trying to join this network" warnings. Just as frustrating though, the Apple TV getting booted off means I need go through the whole tedious process of connecting it to WiFi again (it doesn't remember the password for some stupid reason), and then manually surfing again through the Sources list just to get back to streaming my media.
    What the heck is going on? Is it the kind of security I'm running? Should I try WEP or... none at all? I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore; it's all just flavors 802.11n now. When I set up the AirPort Express to connect to the network just for AirTunes streaming to the stereo, I used the setup wizard that the AirPort Utility provides. Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?"
    Any thoughts or similar experiences are very, very appreciated. My wife and I love this setup, but its unreliability is really getting on my nerves. Thanks in advance.
    Message was edited by: bedoughty

    Firstly, the easiest bit (although I don't believe you need to do this):
    I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore
    You will get additional settings if you hold down the option key while browsing the radio settings drop down menu.
    Moving on: Unfortunately a dropped connections seems to be a problem with umpteen causes and not only is it difficult to troubleshoot with someone in a forum it can also be made even more difficult because many problems are associated with network settings on a router that the person who is trying to help is unfamiliar with.
    However you seem to be convinced your problems arise when your express is running which may narrow things down a little if correct, if not it may actually lead us away from the answer to your issue.
    Is it the kind of security I'm running? Should I try WEP or... none at all?
    I use WPA and have no problems (password = 8 Characters)
    Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?
    I have my expresses set to participate in a WDS network, but that's because I use them for other things other than itunes, I would have thought 'join a network' would be fine.
    You could check that all your devices are using independent IP addresses and all are using the same subnet. You could also check that no two devices have the same mac address, I've been told a million times this can't happen, but I've seen it. You may be wise to check these things before and after your devices have been 'kicked off the network", you may even want to write them down to see if any are changing.

  • How do I connect my Airport Extreme to my modem (Cisco Model DPC3010)?

    I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010).  I have used the Airport Extreme for years with other modems with no trouble.  Alas, this time around I can't get it to work.  I think I might not have the cable connected correctly.  Help, please.  Thanks

    I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010).  I have used the Airport Extreme for years with other modems with no trouble.  Alas, this time around I can't get it to work.  I think I might not have the cable connected correctly.  Help, please.  Thanks

  • How do I connect my airport extreme to windows 8.1

    how do I connect my airport extreme to windows 8.1

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

  • How do I connect my airport extreme to wifi as a repeater

    how do I connect my airport extreme to wifi as a repeater?

    Thanks for the info.
    Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
    It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
    I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless.

  • How do I connect my Airport Extreme to an AT

    How do I connect my Airport Extreme to an AT&T U-verse Modem/Router?

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?  It worked very well.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
    Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
    Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
    Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
    See the topic about Time Machine support for USB disks in this Apple Support document:
    http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

  • I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
    Sorry, but no.
    Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
    Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

  • Time Machine doesnt see my USB drive, connected to Airport extreme =(

    Hello,
    I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
    I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
    osx 10.5.5 with airport utility 5.3.2
    Thanks in advance!

    Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
    Good luck everyone who struggles with this.
    David

Maybe you are looking for