Error: A file, directory or orther piece of data could not be found error-32

Hi Everyone,
Could anyone tell me why i am getting this error when i try to install new Labview 8.6 with other toolkits from NI developer suite DVD. This happened after DVD 1 is completed. The installation manager asked me to load DVD 2. As soon i load the DVD 2 this error pops up and asked me to load DVD 3. Then i load DVD 3, same error popped up again, asking me to load device driver DVD.
Attachments:
error.JPG ‏14 KB

Thanks for your reply. A dirty drive sounds like a good possibility because the same discs was used by one of my colleague and he had no problem. Anyway i continued installing labview ignoring that error. At the end, labview with all device drivers got installed properly irrespective of that error. But some of the modules like Vision development system, Vision builder for AI, Teststand, Requirements gateway did not install at all. So i went back and installed them manually from the discs. Now all good

Similar Messages

Crystal Report Pick List - "Table ADM1 could not be found" Error

Hi,
When preview is select in sales order, we select pick list gets error.
Crystal Report Window Forms Viewer:
"Table ADM1 could not be found"
Error in File Temp { .........} .rpt
The table could not be found"
If I login remotely , then log into SAP as this user I do not get an error.
I have given user full authorisation.
I have run Verify Database.
I am assuming it is some database or network user access rights.
Could anyone help on this?
Kind Regards,
Eric

Report was developed and tested against a 'test' database and then imported into a 'production' database.
Problem appears to be that when B1 connects it does not reset the login credentials for the unlinked tables such as ADM1 and OADM.
Performing the following steps appears to solve the problem. Not sure how many of them are really necessary.
1. Develop and test against the test system as before.
2. Save as a .rpt file outside B1.
3. 'Set Datasource Location' to the appropriate B1 datasource for the production database and individually link every table as well as the data source.
4. Save the .rpt file again.
5. Import into the production database.
This does not specifically address the issue where it worked when logged in to the server but not remotely. Perhaps when logged in remotely the test database was not visible but when logged in locally it was.

"The attempted operation failed. An object could not be found" error when double clicking on an ics file

Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!

yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ??

Deleting Duplicates creates "original file could not be found" error

I am not running iTunes 8.2.1.6 and trying to delete duplicates that were created as I tried to move my iTunes Library to other drives. Now I have many duplicates - sometimes 3-4 of the same song. If I delete them I begin to get "original file could not be found" error when trying to play the one version I kept.
Is there some magic to which one I should keep?

iTunes doesn't help you distinguish between duplicates that are two identical copies of the same file or two separate references to the one original file. If the later is the case and you delete any reference allowing the source file to be deleted then ALL other references to the file become invalid. You can either check the properties of each file before deleting and choose whether to keep or delete accordingly or use itunesremoveduplicates from Teridon's iTunes Scripts.
tt2

VENDOR-EXTERNAL_ID could not be found error while loading supplier conatact

Hi,
Please somebody answer to my doubt.
I am trying to load supplier contact to CLM. I am getting "VENDOR-EXTERNAL_ID could not be found" error for all the entries even though those vendors are present in the system.
Kindly help this, This is bit urgent to work on..
Thanks much for your help in advance.
Regards,
Gurvi.

Hi Vikram,
Thanks for the answer.
I have done the same thing but not getting object type to select and getting below error without selecting object type and imported.
records with errors or warnings from file fci_1589662556155572276_contacts.csv
VENDOR_EXTERNAL_ID     CONTACT_TYPE     PRIMARY_CONTACT     DOCUMENT_DESCRIPTION     NAME     DIRECTORY     COMMON_NAME     FULL_DN     FIRST_NAME     LAST_NAME     COMPANY_NAME     TITLE     ADDRESS_1     ADDRESS_2     CITY     STATE_PROVINCE     COUNTY     REGION     POSTAL_CODE     COUNTRY     PHONE_1     PHONE_2     FAX_1     FAX_2     EMAIL     MAILBOX_ALIAS     MAILBOX_SERVER     TIME_ZONE     CURRENCY     DATE_FORMAT     DISPLAY_LANGUAGE     DEFAULT_GROUP     EXTERNAL_REF     LOCATION     ROLES     INACTIVE     CAN_LOGIN     AUTO_BCC     RETURN_RECEIPT     HTML_MAIL     CREATE_DIR_ACCOUNT     GENERATE_NEW_PWD     SEND_NOTIFICATION     DIR_PRINCIPAL     DIR_CREDENTIALS     EXPORT_EXCEL     DEFAULT_ADDRESS     RECEIVE_DISCUSSION_EMAILS
Failed: object 1: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]
30000520     Sales     TRUE     Field is not displayed     LOWER(CONCATENATE(LEFT(J52,7),LEFT(I52,1)))     directory.local.ss               Tom     Boreas     KELCO INC                    Billingsly     RI               48201     US     617-555-1212                    (GMT-5:00) Eastern Standard Time     USD          English                         FALSE     TRUE     FALSE     FALSE     FALSE     TRUE     TRUE     FALSE               TRUE     FALSE
Failed: object 2: Database error: DB2 SQL error: SQLCODE: -302      SQLSTATE: 22001      SQLERRMC: null. Contact your system administrator. [STANDARD_ATTRIBUTE_ID]
I do not what is happening with import feature in ESO. Kindly help me what to do now.
Regards,
Gurvi.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

When I tap the "download for Android" on my Android phone, I receive a "requested item could not be found" error message.

I am attempting to install Firefox mobile on my Android phone. When I tap "download for Android" on my current browser, I receive a "requested item could not be found" error message.

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
On some supported devices, a bug prevents Firefox from appearing in the Market. This may be related to the recent Market update. You can go to Settings/Applications and uninstall the Market update, then find and install Firefox.
Or, if you have a supported phone, you can download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

TS1702 "App could not be found" error

I erased all data on iphone. Later when restoring, most of the apps are not syncing back with "because the app could not be found" error. HELLPP!!!

I assume that you are trying to sync them from your computer's iTunes ? If so do the actual files exist on your computer and the entries in your computer's iTunes aren't pointing to files that no longer exist on it ? If so then you should be able to delete the iTunes entries and then re-download them from the store : re-downloading.

I am getting this iCloud error message at pc startup: The procedure entry point_objc_init_image could not be found in the dll

I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....

i ahve same problem

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

I keep getting the "some items could not be found" error.

I keep getting the some items could not be found error for some podcasts I downloaded then deleted. Unfortunately, now, I can't get rid of the error message. So I'm trying to search for said podcast to re-delete the entry. And it's not there. And I can't find it anywhere else. How can I fix this?

Another user named Springbk posted a fix that worked for me as I was having the same problem today:
I Changed my DNS settings to OpenDNS
On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
change DNS by adding ( + )
208.67.222.222
then
208.67.220.220
click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

How can i solve the vpn server could not be found error on my iphone 5s?

how can i solve the vpn server could not be found error on my iphone 5s?

FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
If I connect while in the premises (same LAN), connection is instantaneous and flawless.
If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues.

Original File Could Not be Found error

Hi, I'm sure that I'm missing something obvious here, but seem to be stumped. I recently bought a new iMac and migrated my Itunes folder and other stuff to the new iMac from my old ibook and external drive (location of old itunes folder). Everything was fine for a month or so and then the trouble started. Now when I click on a song within itunes, I get an error message state that the original file could not be found and asking me if I want to locate it. If I navigate to my itunes folder and double click on that song (file), it plays just fine.
How can I get Itunes to recognize where all of the songs in my library are?
I tried opening itunes while holding the Option key and choosing the itunes library location to be where it is, but I still get the same error.
I'm not sure what I did to create this error. The only thing that I can think of is that I synched my old shuffle for the first time since I bought the new imac. My iphone, which I have synched numerous times, seems to work just fine (songs play fine, the appropriate files are synched to it).
Any hints greatly appreciated.

No, I haven't found an answer. Even more bizarre, it now seems that some of the songs in the library don't generate the error message while others do. Does not seem to be any discernible pattern (e.g. purchased, artist, etc.)

File could not be found Error

Just thought I'd mention something I've run into recently with my old Shuffle.
I have things set up to be manually managed because Syncing is a mess dealing with all my iDevices so I've grown accustomed to dragging over music manually to my 2nd Gen Shuffle but I've run into this error when doing so:
"iTunes could not copy "song name" to the iPod "iPod name" because the file could not be found."
Which is bizarre because the song is already in iTunes. The way to fix it is to turn OFF "Convert higher bit rate songs to 128 kbps AAC".
It only happens on some songs and I can't find a commonality between them at all. Also I've noticed that when iTunes throughs up this error the Shuffle mounts on the desktop briefly then unmounts. I have it set to not use it as a disk in iTunes.
Has anyone else seen or dealt with this error?

Fantastic, thanks so much for figuring this out.
I was having the same problem, with the same three files failing every time I tried to sync my iPhone. But iTunes could locate them fine via Show in Finder. Even tried making copies of the files, deleting them old ones (from both my Library and the machine), and then importing the copied files back into iTunes. And the same "file could not be found" message still came up, every sync, now on the cloned files.
Turning off the AAC conversion made it go away. Completed sync on the first try, no errors.
Thanks again!

Itunes 9.1.1 'File Could Not Be Found' Error

I'm sure I'm not the only one this is happening to and quite honestly this has got to be one of the most annoying things yet in the world of Itunes errors!
I ripped numerous CD's as well as added a bunch of existing files into my library. When I sync up at the end of it all I get a warning... XX amount of files could not be copied to my ipod because the file could not be found.
HEY ITUNES... YOU RIPPED THE G.D. CD SO IT MAKES SENSE THAT YOU'D KNOW WHERE THE FILE IS!
Is there any way around this issue that doesn't involve trying to delete and re-import a ridiculous amount of files? Am I waiting for Apple to get it's s**t together and patch it?
Any help would be super appreciated!

Fantastic, thanks so much for figuring this out.
I was having the same problem, with the same three files failing every time I tried to sync my iPhone. But iTunes could locate them fine via Show in Finder. Even tried making copies of the files, deleting them old ones (from both my Library and the machine), and then importing the copied files back into iTunes. And the same "file could not be found" message still came up, every sync, now on the cloned files.
Turning off the AAC conversion made it go away. Completed sync on the first try, no errors.
Thanks again!

Error: A file, directory or orther piece of data could not be found error-32

Similar Messages

Maybe you are looking for