Error: A newer version of data type was found than one required

Hi Experts,
we made a changes to a table and then transported the table to the quality system. But a program which is referring to this table, results in dump with the below error message.
Error Message>>>>>>>>>>" A newer version of data type <TABLE> was found than one required "
The issue occures inspite of
1. re-activated the table and send to quality system
2. Re-activated the program
3. Activated and adjusted database in SE14.
Please let me know the correction to be taken to resolve the issue.
Regards
Suresh Kumar

This happens when you modify your new data element, domain while another program is currently using it.
Simply get out completely of the program, re activate the program, reactivate the table. You might need to run se14 to convert the database table but this does not happen frequently. Try first to reactivate the program
Dean
Edited by: Dean Ton on Mar 8, 2012 9:54 PM
Edited by: Dean Ton on Mar 8, 2012 9:56 PM

Similar Messages

A newer version of data type BBP_PDS_HSS_IC was found than one required

Hi,
When I create a SC, it is automatically approved but the PO is not created.
If I check TRX SM58 I get the message:
"A newer version of data type BBP_PDS_HSS_IC was found than one required"
Any ideas?
Carlos Durazo

Hi
Which SRM version are you using ?
By an chance have you created any new fields in the standard structure
'BBP_PDS_HSS_IC' using SE11 Transaction in SRM system. Please confirm the same by taking help of ABAP person here. Seems to be like the structure is not Activated completed.
Related SAP OSS Notes ->
Note 758067 - SRM 4.0: Change documents of new sets (DynAttr, Weight)
Note 820201 - Document changes for attachments does not work
Hinweis 691880 - Changes in tolerances not displayed in purchase order
Note 1018714 - Change documents: Time stamp of the application server
Note 1006898 - Deleted vendor not displayed in Change hist of Shopping cart
Do let me know.
Regards
- Atul

A new version of the data type is present than one required

Hi Experts,
I am getting a short dump saying "A new version of the data type is present than one required".
The data type in my case is the Transfer structure for 2LIS_02_SCL. I am getting this short dump whenever i try to change the transfer rules.
I tried activating and deactivating the transfer and update rules but to no avail. Kindly advice.
Thanks in advance.

SAP Note 1157796 resolved the issue.

Dump-A newer version of data type "ZMNFLOCK" was found than one required

Hi,
I am getting dump in program when there is a select query on ZMNFLOCK table.
Error analsys is given as
Error analysis
The data type "ZMNFLOCK" was loaded from the database during the program run.
    However, a type of a newer version than the one requried was found here.
What could be the problem? my BASIS person says this is somewhere related to ABAP.
should i Adjust & Activate database by going to SE14 for ZMNFLOCK table.
Also noted that error is random in nature and its not coming everytime.

Hi,
There could be an issue with in the table, As Dataelement or domain related to any field in table may have changed, And that field is not getting used aal the time, That's why Dump is coming randomly.
The best possible solution is to Activate and adjust database table through SE14, This will update table with all the updated versions.
Thanks
Saurabh Siwach

Error -2002: a bad public movie atom was found in the movie

I have a Nikon Coolpix L10 (about 2 years old) that records video in the .mov format.
Most of the time when I play the videos on my computer I used to get a bad flicker and the video would often freeze. When I used a video editing program I found that for every two frames of video there was a black frame.
So I thought maybe Quicktime wasn't 100% compatible with the file type or version. So after some deliberation I got Quicktime Pro and I have the newest version 7.6.5. The flicker is gone but the video still freezes.
So I tried exporting to MP4 or AVI or anything and I keep getting
"Error -2002: a bad public movie atom was found in the movie"
It wont allow me to export the video to a different format.
Sometimes when I cancel the export Windows pops up a screen that it's searching for a reason that the Export Controller stopped working.

Thank you very much for the help. I tried copying and pasting the video file that is a .mov file to my zip drive and then I tried to an .avi file. The reason for doing this is so I can edit it with microsofts windows movie maker. After I had it on the zip drive and tried to export it so I could change the file it still defaults to the error 2002 message saying there is a bad public movie atom. I have done a bunch (5) other movies from the camera and they all worked and then the last one would not. So I assume there is a random factor that happens such as file size or something in the recording that causes the random atom attack. Maybe the difference is not being a mp4. It would be great if there was a definitiion of what bad public atom was and what it meant. Computers and technology is great.
I did another search and found that a person commented on zipping the file. Well I tried to zip it from the external drive I have to my desktop and it would not work. Then I ziped the file again. Saved to a external drive then unziped it to the same external drive. From that file I then did the file export and it went fine. So the moral of the story is if the video you took is important keep searching and trying and thanks for everyones help. Why is it the vendor of the product does not post solutions? Anyway now I can go on making movies and editing them. It must be a file corruption issue so that by moving the 1's and 0's around it fixes it's self. Is it a bug with the camera recording or is a bug with quick time?

HT3702 when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help

when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help!

when I finish putting my card details in, I press next and then it says an error occurred!(above the different type of cards) some one pls help!

How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

Can I install my new Final Cut Studio 2 on more than one of my computers.

Can I install my new Final Cut Studio 2 on more than one of my computers.
I have a Power Mac G5 and I am buying a iMac 2.8 Intel 24"
Can I install my Final Cut Studio 2 on both computers?
The G5 I leave at home and the iMac I travel with.
Message was edited by: The Bunnell Farm

Hi The Bunnell Farm-
Greetings and welcome to the Apple boards.
Legally you must have only one copy installed at any one time on any one machine. By definition, you would need a second purchased copy in order to run it legally on the 2nd Mac.
Luck-
-DaddyPaycheck

Demantra - Create New Series - Mdp_matrix - Data Type String Issue

I created a new series (MDP_matrix) that has the data type as String. The display format is BLANK.
I was able to load the data into mdp_matrix table for the series i created.
However, when i look at the series in a worksheet, it does not display the string value. It display zero. for some reason, it considers the series as numeric and not string. Any idea why that would be happening?
This is on version 7.2 using SQL server/tomcat

Hi
1. Have you tried giving display format i.e ###?
2. Is your server expression something like max (mdp_matrix. column_name)?
Tks
MJ

Invoice summary sheet errors in new version-

Until recently I've used Numbers '09 for invoicing and included a 'Summary Sheet' to keep abreast of outstanding amounts.
Screenshot shows what has worked succesfully in Numbers '09 but the same file opened in new version 3.0.1 gives me a red error triangle with the message "The formula contains an invalid reference" - can anybody help please?
Formula from Above screenshot that works in '09 but not in v3:
INDIRECT(A3 & "!Total::B4")

No. Sheets shown in left hand panel are named sequentially and refer to an individual invoice number. So I may have 30+ invoices for a month. Each invoice sheet has a table named Total which has rows for discount, sub total, vat and total owed by a certain date. In this summary sheet I obviously want to refer to each sheet's 'total owed by a certain date' cell and in Numbers '09 the formula was calling each invoice sheet name successfully from column A on this same sheet and then referencing the Total table's correct cell. I'm just trying to be as lazy as poss and when I have a load of invoices to bung on the summary sheet I can just select row above and drag down to populate new rows with sequentially filled invoices numbers with the formula pre-filled.
I've made that sound a lot longer than it probably should have!

Error while querying a XML data type

Hello Friends,
I have a table which has a column type XMLTYPE
In this table i store the XML documents.While retrieving data it works fine on my server.
But when I query on another server it gives this error:
SQL> select * from aw33_view;ERROR:
ORA-04031: unable to allocate 1000 bytes of shared memory ("large
pool","unknown object","qmxlu subheap","qmemNextBuf:alloc")

select * from v$sgastat where name = 'free memory';
POOL NAME BYTES
shared pool free memory 7844132
large pool free memory 3296692
java pool free memory 41703168
I tried to increase the pool area .Still getting the same error.
The version is Oracle10g Release 2
Please advice me more about increasing pool area.
Thanks & Regards,
Jignesh S

LV 8.0.1 Bug, no error when unflattening mis-matched data type

When unflattening a string and wiring a "type" that does not match the original format of the data, sometimes I don't get an error and I get no data. I've attached a VI written in 8.0.1 that illustrates 2 examples of this. In LV 7.1 these cases did return an error, but not in 8.0.1. Can anyone offer some insight or global solution?
Thanks, Chip
Attachments:
LV 8 Bug, no error trapped on mismatched type when unflattening string.vi ‏23 KB

Good afternoon,
Well, this certainly is an interesting situation. In the example “Unflatten string returns data
from previous iterations”, the second iteration of the for loop unflattens a
string as an array of strings type, this is obviously a type mismatch so if any
data is returned I wouldn’t expect it to be valid. What is even more interesting, is that if you
don’t use the auto indexing, but rather explicitly index the array there is no
error, but the data returned is like it was in 7.x. I tried to use the flatten function’s
“convert 7.x data function with no luck in either case. I filed a bug report on this issue (number
3X0CBC3A), but it seems to me the only workaround for now is going to be just
making sure the types match. I know this
is going to be inconvenient for you, and for that I apologize.
Incidentally, in many cases I wouldn’t necessarily expect an
error to be generated if the types don’t match.
This is because the flatten to string function takes your data and
converts it to a string which is nothing more than a byte[ ] of data with some
size information. When you “unflatten”
the function takes the string it is given, and attempts to reconstruct the data
in the format that is specified by the “type” input. If it can reconstruct the data from type,
regardless of the data returned I wouldn’t expect it to generate an error. Sometimes, however, an error can be detected
– if you flatten a double-precision number and unflatten to a single precision
number LabVIEW can detect that the incoming data represents something much
larger than a single precision number. I
suppose that LabVIEW 7 did a better job checking the size of the sting before
deciding whether or not to generate an error.
Again, I apologize for the problems this may cause. Please let me know if there is anything else
I can help with.
Travis M
LabVIEW R&D
National Instruments

ORA-20505: Error in DML - Version of data in db has changed

Hello,
Application Express 3.1.0.00.32
I have created a Report and Master Detail in the Sample Application on oracle.application.com. I am receiving an error on my Master Detail Form when clicking the <Previous and Next> buttons. I have viewed other issues like this in the forum but, it looks like everyone is a little different. Can anyone assist me with this error when browsing to the next record(s). Thanks in advance.
ORA-20505: Error in DML: p_rowid=6, p_alt_rowid=CUSTOMER_ID, p_rowid2=, p_alt_rowid2=. ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "E9A08EDC02A82871E6865DB254B09ED2" application checksum = "39454529513F24BE60C167752BF71750"
I created another Master Detail page and I do not have any errors when scrolling using <> buttons. Here is a process that may be causing my error using the original Master Detail page.
DECLARE
CUSTOMER_ID VARCHAR(20);
BEGIN
SELECT CUSTOMER_ID INTO :P21_CUSTOMER_ID
FROM DEMO_CUSTOMERS
WHERE CUST_FIRST_NAME = :P21_CUST_FIRST_NAME;
-- processing here
EXCEPTION
-- Catches all 'no data found' errors
 WHEN NO_DATA_FOUND THEN
 DBMS_OUTPUT.PUT_LINE
 ('No Data found for SEARCH on ' || CUSTOMER_ID);
END;Edited by: Charles A on Apr 30, 2009 11:40 AM

Hi Charles,
I've had a look at your page 21.
The problem was that the "Fetch Values 2" process was not conditional and was running in the "On Load - Before Header" process point. This meant that it was being run every time the page was being loaded. This process checks for the CUSTOMER_ID relating to the value in P21_CUST_FIRST_NAME which, because the "Fetch Row..." process hasn't been run at that point (it runs "On Load - After Header"), will always return the same CUSTOMER_ID value from when the page was first loaded. The Next/Previous buttons, however, moved the P21_CUSTOMER_ID forward/back one value (this became apparent when this field was changed from "Hidden and Protected" to "Text"). As a result, the data on the page was for "Albert" but the CUSTOMER_ID value was for whatever record was next/previous to the Albert one. Thus, moving next/previous always caused a mix of the actual data.
I have changed the "Fetch Values 2" process to be conditional on P21_CUSTOMER_ID being NULL. This way, the CUSTOMER_ID value is ONLY found by code when the page is first loaded. Thereafter, it is controlled by the Next/Previous functionality.
Andy

Error serializing non-built in data type

hi
I am getting the following exception while accessing a webservice which uses non-built-in
data types as parameter to the service method
Its called ProcessingOrderTO.
The ProcessingOrderTO has three sub-types.. one of which is a Collection
Does anybody encountred this before
I have also attch the WSDL generated .
I am using wls81 SP1
thanks
jas
java.rmi.RemoteException: web service invoke failed: javax.xml.soap.SOAPException:
failed to serialize class mypackage.orderprocessing.processing.to.ProcessingOrderTOweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface java.util.Collection class context=TypedClassContext{schemaType=['java:language_builtins.util']:Collection};
nested exception is:
javax.xml.soap.SOAPException: failed to serialize class mypackage.orderprocessing.processing.to.ProcessingOrderTOweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface java.util.Collection class context=TypedClassContext{schemaType=['java:language_builtins.util']:Collection}
javax.xml.soap.SOAPException: failed to serialize class mypackage.orderprocessing.processing.to.ProcessingOrderTOweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface java.util.Collection class context=TypedClassContext{schemaType=['java:language_builtins.util']:Collection}
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:328)
at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:297)
at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:619)
at weblogic.webservice.core.ClientDispatcher.send(ClientDispatcher.java:206)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:143)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:444)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:430)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:270)
at mypackage.orderprocessing.processing.client.OrderProcessingAssemblerXDBeanPort_Stub.processOrder(OrderProcessingAssemblerXDBeanPort_Stub.java:45)
at mypackage.orderprocessing.processing.client.Client.main(Client.java:69)
[OrderProcessingAssemblerXDBean.wsdl]

Hi Mik
Thanks for these suggestions.I have now completely moved to specific types, instead
of the Collections and ArrayList.
Things seem to be working fine ....thanks for all your help
thanks
jas
"Michael Wooten" <[email protected]> wrote:
>
Hi Jas,
My mistake. I copied the code from a DII client and you are using a Stub
one :-)
The correct code is:
TypeMappingRegistry registry = service.getTypeMappingRegistry();
Where the service variable is what was returned from your XXX_Impl()
call.
You don't have to cast anything, because the object returned from that
method
already extends javax.xml.rpc.Service.
w.r.t. you "moreover" text:
As long as the definition of the non-built-in types is the same as the
WSDL you
sent earlier, you shouldn't have a problem. The question I have is why
are you
a using java.util.Collection object on a web service operation's method
signature,
in the first place? When you do this, you do to things:
1. Producing WSDL that has xsd:anyType for element types. xsd:anyTypes
are fine
for defining XML grammars (i.e. WSDL, SOAP, etc.), but they add too much
mystery
to a business service. They basically tell the WSDL consumer, "the content
of
this element can be anything, so you'll have to figure out what it is
when you
get it. Hee, hee, hee!"
2. Introducing Java-specific classes into your web service. If the extrasList
element always contains the same type of elements, the type for it should
be an
array of whatever that object is. If you used an ArrayList because you
don't know
how many elements this will be, you can still use it in the implementation,
and
call the toArray() method to return a typed array.
To me, it just seems wrong to use Java container objects (i.e. ArrayList,
Collection,
HashMap, Set, etc.) in a web service operation's method signature, because
it
goes against the "programming language agnostic" idea of web services
:-) Just
my two cents.
Regards,
Mike Wooten
"jas" <[email protected]> wrote:
hi Michael
thanks for the reply ..
I tried using the smippet below .. but instead got a ClassCast Exception
at
TypeMappingRegistry registry = ((Service) port).getTypeMappingRegistry();
Moreover
1. When i generate client-jars using the clientgen task, the definition
of my
non-built-in types is different ...
2.
thanks
jas
"Michael Wooten" <[email protected]> wrote:
Hi Jas,
From the stack trace, it looks like you are using a JAX-RPC stub client.
Our java.util.Collection
serializer/deserializer is assigned to the "java:language_builtins.util"
namespace,
so you'll need to register the ArrayList and Collection in the TypeMappingRegistry.
Here's a code snippet:
import java.util.ArrayList;
import java.util.Collection;
import javax.xml.soap.SOAPConstants;
import javax.xml.namespace.QName;
import javax.xml.rpc.Service;
import javax.xml.rpc.encoding.TypeMapping;
import javax.xml.rpc.encoding.TypeMappingRegistry;
import weblogic.xml.schema.binding.internal.builtin.JavaUtilArrayListCodec;
import weblogic.xml.schema.binding.internal.builtin.JavaUtilCollectionCodec;
TypeMappingRegistry registry = ((Service)port).getTypeMappingRegistry();
TypeMapping mapping = registry.getTypeMapping(SOAPConstants.URI_NS_SOAP_ENCODING
mapping.register(
 ArrayList.class,
 new QName("java:language_builtins.util", "ArrayList"),
 new JavaUtilArrayListCodec(),
 new JavaUtilArrayListCodec()
mapping.register(
 Collection.class,
 new QName("java:language_builtins.util", "Collection"),
 new JavaUtilCollectionCodec(),
 new JavaUtilCollectionCodec()
//invoke the web service operation that uses the ArrayList and Collection
There use to be a problem were the type mapping information in the
MyServiceClient.jar
(the one that the clientgen Ant task produces), was incorrect, butI
think this
was fixed well before WLS 8.1 :-)
I haven't tested the above with WLS 8.1 SP 1, but I think it may fix
the problem
you are having.
BTW:
JavaUtilArrayListCodec and JavaUtilCollectionCodec are in ${WL_HOME}/server/lib/webserviceclient.jar.
Regards,
Mike Wooten
"jas" <[email protected]> wrote:
hi
I am getting the following exception while accessing a webservice
which
uses non-built-in
data types as parameter to the service method
Its called ProcessingOrderTO.
The ProcessingOrderTO has three sub-types.. one of which is a Collection
Does anybody encountred this before
I have also attch the WSDL generated .
I am using wls81 SP1
thanks
jas
java.rmi.RemoteException: web service invoke failed: javax.xml.soap.SOAPException:
failed to serialize class mypackage.orderprocessing.processing.to.ProcessingOrderTOweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface java.util.Collection classcontext=TypedClassContext{schemaType=['java:language_builtins.util']:Collection};
nested exception is:
javax.xml.soap.SOAPException: failed to serialize class mypackage.orderprocessing.processing.to.ProcessingOrderTOweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface java.util.Collection classcontext=TypedClassContext{schemaType=['java:language_builtins.util']:Collection}
javax.xml.soap.SOAPException: failed to serialize class mypackage.orderprocessing.processing.to.ProcessingOrderTOweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface java.util.Collection classcontext=TypedClassContext{schemaType=['java:language_builtins.util']:Collection}
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:328)
at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:297)
at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:619)
at weblogic.webservice.core.ClientDispatcher.send(ClientDispatcher.java:206)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:143)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:444)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:430)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:270)
at mypackage.orderprocessing.processing.client.OrderProcessingAssemblerXDBeanPort_Stub.processOrder(OrderProcessingAssemblerXDBeanPort_Stub.java:45)
at mypackage.orderprocessing.processing.client.Client.main(Client.java:69)

Quicktime uninstall error "A newer version of quicktime is already..."

We have 2 new ipods and iphone. We attempted to install the newest version of itunes but when running the install I get this message: A newer version of quicktime is already installed. This installation cannot proceed while the newer version of quicktime is installed." Sadly, my first response was to uninstall the itunes we had that was running fine (aside from a pop up message that would tell us that some of our quicktime needed updating (not exact words, but I can't replicate the error message)
Unable to uninstall quicktime via window uninstall- I get the same error message as above.
I since have manually removed the quicktime folder from my program files. I have used the search feature to look for instances of quicktime and can't find anything else. I have even, at the advice of another, gone into the registry (start, regedit) and then removed quicktime folders found under apple computer. I have run "advance system care" in hopes to clean up the registry.
I am still unable install itunes and continue to get the same message when attempting to install itunes or uninstall quicktime. I need some help! (my kids are freaking out, thus so am I)

Most likely we're looking at a damaged QuickTime.msi file stuck on your system. (That contains the installation database for the previous version of QuickTime on the system.)
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for *at least version 3.0* of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes 9.2 again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Error: A newer version of data type was found than one required

Similar Messages

Maybe you are looking for