Error : A setup activity is not at the start of a cover constraint chain

Hi,
We are getting this error while doing a CIF transfer
Order type 6 Order number 000001095848 Method N
In-house production 1095848, source of supply 250000750010001900030
A setup activity is not at the start of a cover constraint chain
Error ID : /SAPAPO/OM_ERROR2
Message : 18608 (om_act_setup_in_cover_chain)
Please help.

Hi,
Please have a look at the routine /PPM/PDS of the product whose order are stuck with Error during CIF. Looks like the setup activity is not maintained as 01st step of the order chain.
Hope this helps.
Regards,
Nawanit

Similar Messages

Please helpJ2EE engine JCO did not reach the "starting application" state

Hi,
I get the following error "J2EE engine JCO did not reach the "starting application" state" when I try to install my Java components using SAP Development Studio.
When I checked my std_servero.out the get the following error
[GC 65868K->39262K(128320K), 0.0173335 secs]
[GC 65942K->39031K(128320K), 0.0071339 secs]
[GC Full GC[Unloading class com.sap.engine.customizing.ccms.CustomizePerformanceMTEObjectImpl0]
[Unloading class com.sap.engine.customizing.ccms.CustomizeSingleMessageMTEHomeImpl0]

Hello Santhi
The GC messages you see are just an indication of the garbage collector activity. It is not an error.
I'm not sure about what you are doing with the Developer Studio. I guess your WAS Java is already installed, is it right? Are you able to start the visual administrator? Please, paste here the exact error you receive.
Regards,
Désiré

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

HT201407 my phone is giving me a error message saying activation could not be completed. Why is this.

my iphone is giving me an error message that activation can not be completed. I tried using wifi and i am still getting the message.

Has your iphone ever been hacked or modified?

Error: Sorry! We could not complete the transaction using this payment method. Please contact support.

I am everytime getting the following error
Sorry! We could not complete the transaction using this payment method. Please contact support.
I have put my 2 credit card information with Microsoft. I tried calling 2 times the customer support but it was a pathetic response. In a single call I talked to 4 customer support officers and everybody passed on the call to the next without resolving the
problem, and without telling the next officer what is my issue!! they just passed on the phone call to avoid me!!
It is really frustrating that neither Microsoft is provide a good support (it was hard for them to understand my issue, in fact one of the support guy did not even know spelling of Azure.. he/she was saying it assure!!! and One of the guy told me that I
cannot use credit card outside US and Canada. then why you call yourself global???
So Microsoft you have a few things to do as your homework.
1. Your support is pathetic, frustrating and requires better people out there who know about your products, so train them first!
2. You got my 2 credit cards information which I see at subscriptions for Windows Azure, please remove both of them if you cannot provide a good support and subscription.
3. Learn from other cloud providers, AWS will otherwise kill your business.
Regards
Kajal
Kajal Sinha

Hi Kajal,
Sincerely apologize for this inconvenience, for billing & account issue, usually we need to contact the support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/. Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create
a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0).
If above support channels don't work, at your convenient, could you please send an email to me: dxu at microsoft.com with kindly providing your:
Name
Email address
Phone number
We will provide help via emails. Thank you.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

When i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

when i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?

Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Cat0-3750 upgrade. Error: system number 1 does not support the same feature

I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
Ios Image File Size: 0x00877A00
Total Image File Size: 0x00B04200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-37.SE1
Image Directory: c3750-ipservicesk9-mz.122-37.SE1
Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support the same feature set.
Any ideas?
Chris

I was having the same issue even with entering the following:
archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
I noticed the image which was running on the switch was correct without the ".bin" at the end:
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
[OK - 24893440 bytes]
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (100 bytes)
extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
extracting info (100 bytes)
System Type:             0x00010002
Ios Image File Size:   0x017BDA00
Total Image File Size: 0x017BDA00
Minimum Dram required: 0x08000000
Image Suffix:          sm10g-150-2.SE7
Image Directory:       c3kx-sm10g-mz.150-2.SE7
Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version:    03.00.78
Updating FRU Module on switch 1...
Updating FRU FPGA image...
FPGA image update complete.
All software images installed.
Worked for me, hope this helps.

HT204380 Facetime Activation: Could not verify the email address. Please re-enter and try again. Tried so many times,even changed my appe ID and purchased a new facetime for iMac running 10.8.4 Mountain Lion,yet still same outcome. Can somebody help me?

Facetime Activation: Could not verify the email address. Please re-enter and try again. Tried so many times,even changed my appe ID and purchased a new facetime for iMac running 10.8.4 Mountain Lion,yet still same outcome. Can somebody help me?

I have the same problem. FaceTime works fine on my iMac but when trying to use FaceTime on my Macbook Air, I have the same issue you describe.

HT1766 I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work

I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.

If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

I keep getting this error message "Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/MacBook Pro.sparsebundle" is already in use." What should I do to remedy this?

I keep getting this error message: Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
How do I remedy this so it starts backing up again?

Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
Stefan

Discoverer Plus Error: ORA-12154:TNS:could not resolve the

Hi,
I’m running the Discoverer report in Discoverer Plus and getting the below error, but when the same report ran in Desktop completes successfully and the SQL from the report is running without error in SQL nav.
Database Error - ORA-12154:TNS:could not resolve the connect identifier specified.
Thanks in Advance.
Sunil

Hi Sunil,
Did you test the direct method I posted above? That will bypass the tnsnames.ora file. If it connects fine that way, then you likely have a configuration issue with your sqlnet.ora and/or tnsnames.ora
You can test with:
$ORACLE_HOME/bin/tnsping <tnsalias>
If it is successful, then check if you have the TNS_ADMIN environment variable set (echo $TNS_ADMIN) -- assuming Linix/Unix, if Windows, check system environment variables
You may TNS_ADMIN set and pointing to a tnsnames.ora that is not in the default location.
If it fails and your tns entry is correct in the tnsnames.ora file, then you may need to look at the sqlnet.ora
For example,
If you have NAMES.DEFAULT_DOMAIN set.. then you would need enter: <tnsalias>.<domain> (i.e. scott.world)
or you may need to check if TNSNAMES is first in NAMES.DIRECTORY_PATH=
You can remove or rename the sqlnet.ora to make sure that is not an issue.
Hope that helps. Good Luck.
~Steve.

I m using apple 6 .u lauch 8.1.3 then i update my mobile then error 53 .. isuse and not used the mobile occurdind to eroor 53 my mobile is in under warenty im buying my mobile from u.s.a

i m using apple 6 .u lauch 8.1.3 then i update my mobile then error 53 .. isuse and not used the mobile occurdind to eroor 53 my mobile is in under warenty im buying my mobile from u.s.a . pls help how i solve this problem

Hey dheeraj55,
Thanks for the question. If I understand correctly, you have been getting an error when you are trying to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Error : A setup activity is not at the start of a cover constraint chain

Similar Messages

Maybe you are looking for