Error A12E1 when running CCPLauncher.exe

Hi
We need to package Indesign with Creative Cloud Packager but it's stops with erro A12E1.
I try the steps in A12E1 error installing Creative Cloud products | CC but no success.
I also try to run CCPLauncher on a new clean computer.
Both computers running Windows 7 64 bit and a CCPLauncher from 2014-01-30 (version 1.0.0.52)
All results from Google seems to end in the link above. Any other solutions?
Thanks
Sten

I am also having this issue trying to run CCPLauncher.exe on Windows Server 2008 R2 so I can setup an AUSST.
I too have also exhausted the steps in the above link help page.

Similar Messages

Application Builder 7.1: problem when running an EXE

Hello,
I have developped a VI on a computer with LabView 7.1. The VI uses an USB 6008 (with DAQmx base 1.4 drivers.) to measure signals. It perfectly works. Now I've spent a lot of trying to put the system on a computer that doesn't have LabView installed.
-I first installed the USB 6008 drivers on the computer
-Then I made an installer with the application builder (including the run-time engine)
-Once the application is installed on the new environnement, I just keep on having error messages when running it.
-first it doesnt find all the DLL, you have to copy them from the PC with LabView in C:\windows\system32\. Done.
-then I get this big dialog box with a listing of sub-Vi missing, such as: Sub-VI Create Task.vi missing in VI Instance 1 6ProgName.v1
I've looked into the LLB file created with the builder: all these sub-VI are here!! Why won't it work?
What can I do to solve this?? Thanks for your help.

Hi batsenn,
for the missing dll: what are those dll's? you may need to install additional run-time packages, or check some more component in the Advanced Installer Settings form, depending on your application.
Now for the main problem: are you calling vi's dynamically from an external LLB? in many cases when a file is not found from the built application, it's a path problem. In fact, if a vi path is e.g. c:\mysourcedir\myvi.vi, when the EXE is built the path will be something like c:\myexedir\myexe.exe\myvi.vy. You see that there is an additional Strip Path you need to do if you are getting the current path from a vi path.
What I said can be relevant or not depending on the vi calling techinique you are using. A suggestion is to execute the built EXE on the development computer (where all components are present) to check if the problem is still there.
Hope this helps.
Paolo
LV 7.0, 7.1, 8.0.1, 2011

Runtime Error -GETWA_NOT_ASSIGNED when running COI

Hi ALL,
We are getting run time error - GETWA_NOT_ASSIGNED when running COI tasks.
Error analysis
     You attempted to access an unassigned field symbol
     (data segment 32995).
     This error may occur for any of the following reasons:
     - You address a typed field symbol before it is set using ASSIGN
     - You address a field symbol that points to a line in an internal table
       that has been deleted
     - You address a field symbol that had previously been reset using
       UNASSIGN, or that pointed to a local field that no longer exists
    - You address a global function interface parameter, even
      though the relevant function module is not active,
      that is it is not in the list of active calls. You can get the list
      of active calls from the this short dump.
How to correct the error
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "GETWA_NOT_ASSIGNED" C
    "CL_UC_COI_ACT_PT==============CP" or "CL_UC_COI_ACT_PT==============CM00P"
    "REDUCE_GOODWILL_ENTRIES"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
2. A suitable printout of the system log
    To obtain this, call the system log through transaction SM21.
    Limit the time interval to 10 minutes before and 5 minutes
    after the short dump. In the display, then select the function
    "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
Information on where terminated
    The termination occurred in the ABAP program "CL_UC_COI_ACT_PT==============CP"
     in "REDUCE_GOODWILL_ENTRIES".
    The main program was "UCUWB000 ".
    The termination occurred in line 722 of the source code of the (Include)
     program "CL_UC_COI_ACT_PT==============CM00P"
    of the source code of program "CL_UC_COI_ACT_PT==============CM00P" (when
     calling the editor 7220).
702   call method do_inv_net_change->create_data_reference
703     exporting
704       i_type   = cl_uc_coi_inv_net=>gc_ref_pt_block
705       io_model = do_model
706     importing
707       er_data = lr_t_data.
708   assign lr_t_data->* to <lt_share_block>.
709   call method do_inv_net_change->get_block
710     importing
711       et_pt_shares = <lt_share_block>.
712
713   create data lr_s_data like line of <lt_share_block>.
714   assign lr_s_data->* to <ls_share_block>.
715 * change due to selling invor's transaction
716   read table <lt_share_block> into <ls_share_block> index 1.
717
718 * direct shares prior to divestiture
719   assign component 'R_TH_DSH_OLD'
720     of structure <ls_share_block> to <lr_th_dsh_old>.
721   assign <lr_th_dsh_old>->* to <lt_dsh_old>.
>>>>   create data lr_s_data like line of <lt_dsh_old>.
723   assign lr_s_data->* to <ls_dsh_old>.
724   assign component ucf6_cs_coi_fld-pcnt1
725     of structure <ls_dsh_old> to <pcnt1_7a>.
726
727 * change of direct shares in divestiture
Please provide your suggestions.
Edited by: VM2727 on Feb 10, 2012 3:27 AM

Or even these ones:
SAP Note 1480856 - C/I: Program termination GETWA_NOT_ASSIGNED
Symptom
When you execute the consolidation of investments, a program termination
occurs (short dump GETWA_NOT_ASSIGNED in the method CREATE_OCI_LIST of the
class CL_UC_COI_ACT).
Note 1467924 - Termination GETWA_NOT_ASSIGNED in CL_UC_COI_ACT_PD
Symptom
When you execute the consolidation of investments, the program termination GETWA_NOT_ASSIGNED occurs in the method CALC_NET_INCOME_MEM of the class CL_UC_COI_ACT_PD.

Error Message when running BI Publisher

Hi-
Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
Any idea regarding the error message
Regards,
MACD

Did your custom report ever ran successfully in the environment you are getting the error.
Most of the time not all the report definition and associated definitions are migrated to the next environment.
Have a look at following doc:
E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

A critical program error occured when running a workbook

Some end users get a critical program error occured when running a workbook when they want to make selections.
In the trace they get the following message
System.ArgumentException: Item has already been added. Key in dictionary: "44ABATDK7TYM365CYLQ0VDKU6" Key being added: "44ABATDK7TYM365CYLQ0VDKU6"
This happens only on some PC clients !
Thanks for any help !
Ivan

Hi Vid,
Thanks for your suggestion.
I am using a different patch i.e.
BI AddOn 7.X (based on 7.10), Support Package 5, Revision 1083
and it helps to solve my problem.
Cheers.

Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

Error message when running form

hi everybody,
im getting this error message when running a simple form.
Positional Parameter after key command line.
Can anyone please help.
thnk u

Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Receiving Error Message when running sh rep_populate.sh

Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your help

We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

Error message when running Transaction Code = ME84

hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?

Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish

Following error occurring when running application in wireless tool kit

Hi
Following error occurring when running application in wireless tool kit
java/lang/ClassFormatError: Bad version information.
can any suggest y ?

Hi,
I am also facing the same problem......................
java/lang/ClassFormatError: Bad version information
The error occurs when I try to simulate the mobile device using wireless tool kit. Does it have anything to do with the antivirus/firewall running on my system?
Did Ram get a solution to his problem? Can anybody please help?
Many Thanks
Merin
HI
Sorry i could not find any related information there
the version of wireless toolkit i am using is 2.1
well in release notes its given that it also
supports cldc1.0 and midp1.0
presently i am using cldc1.0.4 and midp1.0.3
versions
is there any version compatability error
please suggest me its quite urgent

Error 1003 when running .exe

I am having a problem with error 1003 when I run a built application. I have searched the forums and found many others with this problem, but they encounter the problem while building the application, not while running the built .exe.
I have a top level VI (AutoRun.vi) that calls 3 VIs in sequence. All three are called in the same manner. The first two work fine, but I get this error with the third sub vi. This is how I call the subvi:
Use App.kind, check for "Run Time System" (strip app path twice), or "Development System" (strip app path once)
Build path to combine stripped path and file name of subvi to open
open vi reference
Invokee Node - Open FP
         Activated - T
         State - Standard
Invoke Node - Run VI
         Wait until done - T
          Dispose ReF - F
Invoke Node - Close FP
Close VI Reference
The error I get is:
Error 1003 occurred at Invoke Node in AutoRun.vi
Possible reasons:
LabView: the VI is not executable
I do not get this error while running in the development environment. Only when I run it as a .exe. Also I have had no problems with this code in the past. I just made a small change and now I have this problem. I have gone back to the old code and have the problem with it too.
I build the app by starting the app builder, selecting the top level VI, adding dynamic VIs and select all 3 subvis. The front panel of the second VI is not visible while running.  I have to go in and manualy change the "Remove Panel" in the build settings for this VI from the default yes to no. If I do not do this I get an error while trying to run the built application. I have no idea why this happens either, but making this change fixes the problem. After this I select build.
BTW, I have LabView 7.0

Hello,
Not sure what happened on your end, but if the problem comes back repost and we'll explore it!
Best Regards,
JLS
Best,
JLS
Sixclear

Error 229665 when run ContGen-IntClk.c (example file) pci 6229

Dear All:
I try to use pci 6229 to send analog signal by using the given example program, ContGen-IntClk.c, in DAQMX 8.3.
I use Visual c++ 6 to compile it.
After I run the exe file, monitor show error
"DAQmx Error: Internal software Error occureed in MIG software.
Status code: -229665"
(Note: the result was the same, when I did with visual basic)
How should I solve this problem?
My computer has operating system: Microsoft XP 2002, CPU p4.
Thank you,
Thongchai Phairoh.

Hey Thongchai,
Thanks for contacting National Instruments. This error is usually associated with Measurement and Automation Explorer having a problem with it's database and is usually fixed with a reinstall of the driver or repair of the driver.
You could try a few things to attempt to resolve this issue.
Attempt to repair the driver from the Control Panle and highlighting National Instruments and click, Change\Remove and highlight NI-DAQmx and click the repair button.
Reinstall the DAQmx 8.3 driver.
Upgrade to either 8.3.1, or to the newest version 8.5
Let me know if you are able to resolve this with any of these options.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

XI installation - problem when running sapinst.exe

hai,
when i'am running sapinst.exe file i'am getting the following error -
SAPinst is getting started.
Please be patient ...
guiengine: call to bind() for socket 1832 failed. No such file or directory
ERROR      2007-02-28 14:50:20 [iaxxgenimp.cpp:532]
           init()
FGE-00006 Attempt to open a communication port connection failed. Check whether the port 21212 is already in use.
ERROR      2007-02-28 14:50:20
FCO-00034 An error occurred during the installation. Problem: error in GUI server subsystem.
Exit status of child: 1
can anyone help?
bye
nandana

Hi Nandana,
Please check this link...
Re: problems installing NW04 sneak preview (java)
it talks about the same problem as yours...
Thanks.
btw...i got the link from google
Message was edited by:
        Renjith Andrews

Following error occours when running a BI Publisher report in Siebel: Operation ' ? ' of Web Service ' ? . ? ' at port ' ? ' failed with the following explanation: " ? ".(SBL-EAI-04308)

I am installing a new reporting server.
When running a report I get the above error:
Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308)
Any ideas?

Have a look here for Oracle's guidelines on troubleshooting such errors:
http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsTroubleshoot.html

Error A12E1 when running CCPLauncher.exe

Similar Messages

Maybe you are looking for