Error:AA480(Reversing document) ??

Hi SAPians,
Wish you all Happy New Year-2009 In advance.
The Asset is purchased on 24.12.2008 and is yet capitalized ,so Dep. is not charged too.
But while Reversing the asset Document in AS08 its not reversing and throwing the Error message..
"The Quantity on Asset 1050 45000001-0 will become negative from this posting"
Message No.AA480
Here the Co.Code is :1050
Asset no is :2000006
What may be the reason so that its not reversing,plz suggest.
Regards,
Sumeya

Symptom
You post a complete retirement of a fixed asset that manages quantities. The fixed asset also permits negative values within at least one area. Next you attempt to reverse the retirement. The system displays error AA480 'The quantity on asset & & will become negative from this posting'.
Additional key words
XNEGA, AMSS_DOCUMENT_REVERSE, LAMDPU14, AA480, MENGE, MEINS
Cause and prerequisites
1. If the fixed asset contains negative values this results in positive amounts during the retirement.
2. The fixed asset manages quantities.
3. The cause is a program error.
Solution
Implement the source code corrections.

Similar Messages

Error while reversing document posted through cash desk

Hi,
I have posted a payment through cash journal/cash desk (FPCJ) and closed the the lot. Now I want to reverse the payment, however SAP function module 'FKK_CJ_PROHIBIT_RVRSL_OF_DOCS' is throwing an error - 'reversal not performed'. Does anyone know how to reverse a payment document posted through cash journal if it's lot has already been closed?
Thanks,
Suhas.

HI Ravi,
If a payment is posted through the FPCJ and lot is closed , payment cannot be reversed that's is standard functionality, there are lot of notes on this which gives you alternative steps that need to be taken.
check note 644870.
thanks,
Vikram

Error while reversing mat document

Dear all,
While reversing material document i am getting error as "Reverse the availed CENVAT credit before cancelling excise invoice."
How i should proceed?
Naren
Edited by: Narendra Khedekar on Oct 5, 2010 10:50 AM

Hi,
Cancellation of excise invoice process as below.
1) Cancel the material document in MIGO
2) Post the excise invoice in J1IEX
3) Cancel the excise invoice in J1IEX
4) Perform MIGO again if required.
If try to cancel without canceling GR documents through J1IEX or J1IH (CANCEL OPTION) you will get an error as Excise invoice has been already posted
Cancel GR document
Post excise invoice - J1IEX while posting under miscellaneous tab enter Rej code 0001
Cancel Excise invoice u2013J1IEX
Cross check the entries in J2I9 - You can see credit entry which were already taken credit & the second entry of cancelled/reversed. Hope this helps you.

Error while reversing the 101 document

Dear Experts,
i am getting the below error when reversing the document i.e 102 mvt type.
''Trans./ev. type of doc. WE not processable w. function WA''
please help
Regards
prakash

Dear,
As its understood -
Error : Transaction / event type of document WE not processable with function WA.
Where is docyment WA - For Goods issue and WE - For Goods Receipts.
I think you are attempting MIGO - Goods Return with movement 102 and entering material document number of Goods Issue or vice versa.
Please make sure the entered reference material document number you are entering.
Regards,
Syed Hussain.
Edited by: Syed Hussain on Sep 30, 2008 10:23 AM

Service entry sheet reversal document (Status: Error in process) List repor

Hi,
I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
while investigation i found below options (not exactly meeting my requirement)
1) Display and Process Confirmations Centrally >Document Category>reverse documents
which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
2) I can execute PPB_PD with BUS2203>status>I1019
is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
Thanks,
Jai

Hi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks

Posting date is wrong in the reversal document in FI document

Hi All,
We have one issue related to Posting date. We need your valuable feedback on the same:
Issue:
There are some documents which reversed in the month of Mayu20192010 but the posting date is coming as Marchu20192010 which is very strange. The Original documents posted via transaction code F110 in the month March and reversed in the month May but the posting date of the reversal document is coming as March which is NOT correct.
Analysis:
Our first analysis is that, the posting of Original document happened when the system was in 4.6 version and reversal happened after ECC go live. We are not sure if that could be the reason.
Secondly, we checked the change log of transaction code OB52 but there is no change for the posting period 3 in the month of May.
Thirdly, we tried to replicate the same scenario in our development system but here we are getting the error that Posting period is not open which is correct.
Request you to please look into it and provide you input.
Thanks.
Regards,
Ajay Kumar Tiwari

Hi,
By any chance, did the user enter march date in FB08 screen ?
Best Regards,
Madhu

Error when reversing settlement back to Auc - Balance in transaction curren

Hi,
We get following error when reversing a settlement from asset back to Auc (using AIST):
FI/CO interface : Balance in transaction currency
Message No. RW022
This error only occurs when we settle a portion of the amount sitting in AuC and not the full amount. (When we settle full amount in AuC to final asset we can reverse no problem).
When we do a partial settlement to final asset, SAP creates a document and in that document it posts a debit and credit for the unsettled amount e.g. 50k in Auc and we settle 45k to final asset with 5k remaining in Auc - the document looks as follows
AuC     5,000.00-
Auc      5,000.00
AuC    45,000.00
Final Asset    25,000.00-
Final Asset    20,000.00-
The 5k above is the unsettled amount still sitting in AuC
When we try reverse we get error message RW022 and detail is as follows:
    The balances in transaction currency must be zero for each logical
    transaction when transferring to the FI/CO interface. A balance of "
    5,000.00-" "CAD" was determined for the logical transaction "AZVZ".
System Response
    The FI/CO interface does not process any transactions which have a
    balance in transaction currency other than zero.
Procedure
    This is a system error of the calling application.
Note: We do use line item settlement in asset classes
Much appreciate any help..

Hello,
You may need to check SAP notes below regarding this issue:
1523814   Transaction AIST ends with error RW 022
1514384   Error message RW 022 after Note 1444750 implem
1444750   Postings without transaction currency
I hope it helps.

Resetting this reverse document is not possible - FBRA

Hi,
I'm trying to reset the cleared items with Tcode FBRA also system is throwing error like below
==================================================================================================
Resetting this reverse document is not possible
Message no. F5579
*Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:*
Exchange rate differences were posted.
=================================================================================================
the document has items of exchange rate differences, but,
Question: The exchange rate difference it's related with t-code fagl_fc_val ???l

Hi,
Reverse the document using FB08 and input the reversal document no in the reset transaction FBRA.
Hope it works.
~Andrew

Reversal of reversal document

We have excuted F.05 to revaluate the Foreign currency revalution so this is created document 6100000001 ,
after that wrongly we have reversed document "6100000001" via (FB08) which is created revauation document 6100000001 but now if this "7000000871" document can be reversed technically my problem will be solved ...
we are unable to reverse the document via FBO8 & FBRA
We are getting below error messages while doing :---
FB08:---
1)Document was already reversed(6100000001)
Message no. F5361
2)Document was already reversed(7000000871)
Message no. F5361
FBRA:---
1)Document 6100000001 2010 is not a clearing document
Message no. F0604
2)Resetting this reverse document 7000000871 is not possible
Message no. F5579
Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:
Exchange rate differences were posted.
Note: we are in ECC-6
Your intime help is highly appreciated ....
Thanks
Vyshnava

Hi
Reversal of Reversal Document is possible.
go to F-02 and from menu select document - post with reference and select give the reversed document number which you want to reverse, company code, fiscal year and then select Generate Reverse Posting checkbox and display line items checkbox. you will be able to see that Reversal of Reversal Document will be done.
direct transaction code is FBR2
regards
venkat

Reversal of a reversed document should not happen

Dears
In our system, user is able to reverse an already reversed document, which should not happen.
In the Message Control F5 361, nothing has been changed to make this warning or information.
Hence the standard is 'error'. But why the system is allowing the reversal of a reversed document then ?
Could you please provide inputs ?

Hello Nikitha,
Please create one validation according to your requirement. PFB the relevant T codes to create validation.
GGB0 - Create Validation
OB28 - Activation of FI validations
GCT9 - Transport: Validations
Please let us know do you still require any more information
Thanks & Regards,
Lakshmi S

How to cancel/reverse a reversal document

Hi
A user has by mistake entered the reversal reason as "05 - Accrual) which has resulted in the reversal entry being posted to the next period. This document need to be reversed in the original period. However the system (FBRA/FB08) does not allow the reversal document to be reversed.
How can this be corrected?
Thanks & Rgds
NW

HI
if u want to "reverse the reversal document" :change the error message to warning
1) go to screen OBA5 and give application aread :F5
2) select new entries give message number :361 and online :W(warning) batchi : W
3) select save
now u get warning message instead of error so u can "reverse the reversal document"
wedid the same thing
thanq
sandhya.

Reversal of reversed document

Hi,
I need some clarification on the below issue.
User generated a payment run (APP) for a Vendor invoice however the bank confirmed due to technical error in their side the payment was not generated successfully,so the user has reversed the payment document .However it was found later from bank that payment was successful.
Now they want to restore the payment document which was reversed.
Doc no 5300000047 payment document (KZ) was reversed against doc # 3000008122 (ST).
They want restore 530000047 in SAP..Is it possible.
Kindly advice.
Regards.
Lavanya

Hi Expert,
You can reverse the reversed document, but it will generate a new document number in SAP.
Go to T-Code: F-02
In Menu -- Select Document -- Post with reference or Press (Shift + F9)
Provide Document Number of reversed document, Company Code and Fiscal Year and Select the Generate reverse posting check box..
Which will reverse your reversed document...
Regards,
GK
SAP

Error in accounting document-urgent

hi
gurus
iam working on ECC 6.0
i have createe sales order , delivery and billing without taking tax conditions
in this case accounting document is generated
but when iam taking tax conditions in my sale order and do the delivery and billing
at the time of billing(in vfo1) , No accounting docuemnt is generated
system show "error in accounting documents"
pleae help
thank in advance

To resolve the error, you can analyze account determination in the billing document. Process:
Goto T.Code: VF02 & Enter Invoice number
Next (On the top most strip) goto Environment
Next (Select Environment) go to Account determination
Next (In Account Determination) select Revenue Account Determination (first option)
This will list all the condition types in the Billing document & analyze each condition & check for which G/L accounts is not determined.
Possible errors:
1. VKOA not maintained for required combination
Solution: Maintain the combination in VKOA.
2. Account Assignment of Customer / material not maintained in Customer / Material Master (If maintained in combination in VKOA).
Solution:
Option 1 (Standard solution):
step 1: Cancel Billing Document --> Reverse PGI --> cancel Delivery --> Cancel Sales Order
step 2: Maintain Customer master / Material Master correctly.
step 3: Recreate sales Order --> Delivery --> PGI --> Invoicing.
Option 2:
Force the Account Assignment Group of Customer / Material through Debug in change mode of Billing document, which will release Billing Document to Accounting.
3. Account Key not maintained in Pricing Procedure:
Impact: This may create accounting document, but if condition type, which are to be posted to account, but do not have account key maintained in pricing procedure, it will not be post the relevant condition type to G/L account.
From FI Side, you require to check that all the G/L account has been maintained through T.Code: FS00. G/L account being Master data has to be created in each client ot uploaded through LSMW / SCATT / BDC.
In Billing Document in change mode (in the first screen where we enter Billing Document number), on the top most left hand corner, take a dropdown on Billing Document & select Release to accounting. Here you can get the under mentioned possible message:
1. G/L account not found
2. Cost Element not maintained for G/L account.
In both the above cases, FI consultant requires to take corrective action.
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Reverse document for check voided with FCH9

I voided a manual check that was created by using FCH9. I want to be able to reverse the document, but when I tried to reverse, I got an error that the document was already cleared and could not be reversed. Is there a way to reverse the payment document?
Any help would be greatly appreciated!

Hi
If no other new check has been issued for the payment document in FCHN, than you have to use FBRA to reverse the payment document. You should use the option reverse and reset
Regards
Sanil Bhandari

BAPI reverse document for JVA company

Hi
I want to use a bapi to reverse documents. I have tried with BAPI_ACC_INVOICE_REV_POST for reversing an invoice receipt. The company use Joint Venture Accounting.
When I run the bapi I get the error: 630 'Reversal in component JVA not possible'. The error is created when the bapi run the JV_DOCUMENT_PREREV function.
Can anyone help me?
Gaute

Hi
I want to use a bapi to reverse documents. I have tried with BAPI_ACC_INVOICE_REV_POST for reversing an invoice receipt. The company use Joint Venture Accounting.
When I run the bapi I get the error: 630 'Reversal in component JVA not possible'. The error is created when the bapi run the JV_DOCUMENT_PREREV function.
Can anyone help me?
Gaute

Error:AA480(Reversing document) ??

Similar Messages

Maybe you are looking for