Error accessing AS/400

Hi abapers.
I'm trying to access an AS/400 table, where one of the WHERE fields is a date field.
However, I keep getting an error with the format of the date field...
I've tried using YYYY-MM-DD, YYYYMMDD, and nothing, I still get an error
Have anyone worked with this??
Thanx
Jesus

If the table is not in the ABAP dictionary, then this question is better suited to an AS/400 forum.
Rob

Similar Messages

Flex encounters "Security error accessing url.Unable to load WSDL"

i have created a flex application which connects to SAP via web service.
when i try to run my flex application i encounter the following error.
"Security error accessing url.Unable to load WSDL"
i went through various posts relating a BSP application and crossdomain.xml
i have created the crossdomain.xml file in the application and
i tried those options and still not able to figure out the problem.
the security error is because of the absence of the crossdomain.xml file, and in which path should i be saving the file?
Kindly help me solve the problem.
Thanks in advance.

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

Security error accessing ur unable to load wsdl

HI
I am using a webservice(.net webservice) that is on my
localhost and using it in flex application that is also on my
system. Means both the webservice and flex application are on the
same system.
But when i gives the reference of the webservice using the
system ip and run the application by the flex builder it generates
the error as:
mx.messaging.messages::ErrorMessage)#0
body = (Object)#1
clientId = "DirectHTTPChannel0"
correlationId = "24CD6542-F141-1A05-BA35-00A108CB30A0"
destination = ""
extendedData = (null)
faultCode = "Channel.Security.Error"
faultDetail = "Destination: DefaultHTTP"
faultString = "Security error accessing url"
headers = (Object)#2
messageId = "CC123DF0-0E6C-05FF-7894-00A109676283"
rootCause = (flash.events::SecurityErrorEvent)#3
bubbles = false
cancelable = false
currentTarget = (flash.net::URLLoader)#4
bytesLoaded = 0
bytesTotal = 0
data = (null)
dataFormat = "text"
eventPhase = 2
target = (flash.net::URLLoader)#4
text = "Error #2170: Security sandbox violation:
http://localhost:3000/MYCIMS/flex_bin/Design.swf
cannot send HTTP headers to
http://myip/MyServer/AdminWS.asmx."
type = "securityError"
timestamp = 0
timeToLive = 0
I have put crossdomain.xml file in the root of the localhost
and made every changes possible in the crossdomain.xml file but the
application is not running.
Please somebody provide an effective solution, I have spend
lots of time to resolve the problem but its not being....
Thanks in advance
Gopi Saini

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

Security error accessing url (Unable to load WSDL)

Hi folks.
I have a Flex project that use a WCF webservice. In my localhost everything is allright, but I want to upload my flex project to a web host (http://www.dorj.ir) and upload my WCF webservice to a server that has a valid IP...
After going to http://www.dorj.ir, you can see this error
Security error accessing url
Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://ip/service.svc?wsdl)
I put the crossdomain.xml file in the root of my server:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="http://www.dorj.ir" />
<allow-http-request-headers-from domain="http://www.dorj.ir" headers="SOAPAction"/>
</cross-domain-policy>
But I have the same error, yet...!
what should I do?!

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

Error accessing file template file not found (error code 2)

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330

I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03

Error: Access Denied while opening the Sharepoint 2010 site.

Dear All,
When I am trying to open the site I am getting followinh error,
Error:
Error: Access Denied
Current User
You are currently signed in as: DomainName\Administrator
Sign in as a different user
Go
back to site
Can anybody please tell me how ro resolve this isse ?
Thanks and Regard's
Harish Patil

Hi,
Run the PowerShell cmdlet to list and check the users permisssion on SharePoint site. You may refer to the articles below.
Get Users Permissions List on SharePoint Webs – PowerShell Script
http://mkdot.net/mknetug/mk_sp/b/darko/archive/2010/10/01/get-users-permissions-list-on-sharepoint-webs-powershell-script.aspx
How to Check Effective Permissions of a User in Each Site in a Site Collection in Sharepoint 2007 and Sharepoint 2010 using Powershell
http://rahulrashu.blogspot.com/2011/12/how-to-check-effective-permissions-of_11.html
Hope that helps.
Ivan-Liu
TechNet Community Support

Getting error "Access via null" when running the web dynpro application

Hi experts,
I am getting the below error while executing my web dynpro application
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
I am getting the error only when I am calling a method create manufacturer from my web dynpro program. If i comment this code my application works fine
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
    gi_manufacturer = ls_manufacturer
IMPORTING
    lv_message      = lv_status
i have created a attribute mo_ch_instance of type YSRM70CL_CH_SW_MD where YSRM70CL_CH_SW_MD is the class which has the create_manufacturer method that i am using in my code.
Kindly let me know whats the issue.
Regards,
Vinod

Hi,
if   wd_this->mo_ch_instance is not initial.
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
gi_manufacturer = ls_manufacturer
IMPORTING
lv_message = lv_status
endif.
Check wether you have created the object for that class r not.
Regards,
Lekha.

DBCA Fails with error accessing inventory - OEL5.3 DB11g SE install

Hello,
We're trying to install ODB11g for x86_64 on a OEL5.3 and after having prep'd the environment, kernel, etc... The oracle user runs the runInstaller script, everything passes with flying colors until... the DBCA when in the step of completeing "Database Creation" gives an error which is logged in the: emConfig.log and suggests we re-execute the emca script...
+"Enterprise manager configuration failed due to the following error - error starting Database Control+
+Refer to the log file /.../dbca/orcl/emConfig.log for more details.+
+You can retry configuring thsi database with Enterprise Manager later by manually running+
+/.../bin/emca"+
After searching the logs, we find that the oraInst.loc file does not exist or there are no permission, the /etc/oracInst.loc exists but the emConfig.log file says this is the error (or one of them maybe):
Aug 12, 2009 4:24:56 PM oracle.sysman.emcp.util.OUIInventoryUtil getInstallInventory
CONFIG: Error accessing inventory.
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: The inventory pointer location /etc/oraI
nst.loc is either not readable or does not exist
... this is a clean install. Any sugestions?? (we've tried re-running the config steps according to the documentation but maybe we've missed something???)
Thanks for any help!!
LMA.
Edited by: user8678312 on Aug 12, 2009 1:38 PM
Edited by: user8678312 on Aug 12, 2009 2:59 PM

No luck with either workaround... the DBCA runs smooth until it gets to the emca where the oraInst.loc keeps on annoying... checked its permissions 644, owner root... ran the emca manually heres the results:
Aug 12, 2009 8:29:48 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at /u01/app/oracle/cfgtoollogs/emca/orcl/emca_2009_08_12_20_28_33.log for more details.
Could not complete the configuration. Refer to the log file at /u01/app/oracle/cfgtoollogs/emca/orcl/emca_2009_08_12_20_28_33.log for more details.
the log turns out the same error regarding the oraInst.loc.
any other suggestion perhaps?
thx!!

RECEIVER: ERROR: Access to requested resource is not authorized for user

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
when i try to access the Source.html protected with siteminder, I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: Access to the requested resource is not authorized for user uid=username, ou=People, dc=xyz,dc=com
Please help me to solve this issue?
Note: When the resource is accessed directly, siteminder authorizes the same user.

We also occationaly have this error. See my log for an example :
Transaction completed successfuly for DocEntry = 54358 : In company FIXTHISPLEASE on 3/2/2010 9:48:49 AM
Transaction completed successfuly for DocEntry = 54365 : In company FIXTHISPLEASE on 3/2/2010 10:24:55 AM
Transaction completed successfuly for DocEntry = 54403 : In company FIXTHISPLEASE on 3/2/2010 12:14:53 PM
-5006 - The requested action is not supported for this object. for DocEntry = 0 : In company FIXTHISPLEASE on 3/2/2010 1:38:45 PM
Transaction completed successfuly for DocEntry = 54424 : In company FIXTHISPLEASE on 3/2/2010 2:40:44 PM
Transaction completed successfuly for DocEntry = 54425 : In company FIXTHISPLEASE on 3/2/2010 3:01:51 PM
Transaction completed successfuly for DocEntry = 54426 : In company FIXTHISPLEASE on 3/2/2010 3:03:41 PM
Transaction completed successfuly for DocEntry = 54427 : In company FIXTHISPLEASE on 3/2/2010 3:05:12 PM
As you can see from 9:48am to 3:05pm, one occurance of this error occured. And they say that the transaction was
tried a few seconds later and it worked.
the STARTTRANSACTION() and ENDTRANSACTION() are used by the DI API so I'm really in the blank about this error and it starts to anoy the customer. Their SAP is 2007 SP01 PL08
Any concrete ideas about this ?

Add ABAP program: validating package - error accessing shared objects-area

When adding a new program or browsing the packages in eclipse i get an "error accessing shared objects-area".
I can edit, save and run existing ABAP reports, however.
There was a similar problem here, regarding database procedure proxies but the solution doesn't apply to my problem, i guess. The solution was about creating the shared memory area CL_RIS_SHM_AREA. I can't access the memory area and start the constructor, as it doesn't show up on the monitor.
ADT 2.28
Eclipse 4.3
Netweaver 7.31 SP4 -> is this really compatible with ADT 2.28?
Thanks in advance for helpful hints,
Julian

HI Julian,
if the area doesn't show up in the monitor, please try to start the constructor in transaction SHMM on your own by selecting the icon 'Start Constructor' as shown in the screenshot.
Choose CL_RIS_SHM_AREA as area, select 'Default Instance' and 'Dialog' as execution mode. Then press 'Create'. Either this works or the system will tell you the issue with the instance creation (e.g. insufficient shared objects memory - see the other solution description).
Best regards, Sebastian

What does this error mean? Error: Access violation at address 0053DD46

I am trying to run diff reports using batch scripts, and its very puzzling that some of the diff report scripts within the batch script are running and some are not, there is no consistency to what is getting errored out.
I then tried running them manually in foreground on the client and I get the same issue. Has anyone encountered this issue? What do I make of it?,
4/24/2013 1:29:30 PM - *** MDMConnect starting ***
4/24/2013 1:29:30 PM - Logged in successfully.
4/24/2013 1:29:30 PM - Started export job for PLN_FLD_ACCT_DIFF
4/24/2013 1:29:34 PM - ERemotableException with message: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024" while running Export
4/24/2013 1:29:34 PM - => ERROR: Data Relationship Management Server returned error: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024."
4/24/2013 1:29:34 PM - *** MDMConnect stopping ***
Thank you
Tanuja Donavalli

This is issue is coherent in DRM version 11.1.1.2
Whenever a property is deleted, the references to that property would still exists/stored in tables. The next version of DRM is made to address this issue, where in it takes care of removing all references whenever we delete the property.
Cause: Properties was deleted from DRM client but the value was still stored in the compare table for Difference export and causing export to fail.
Solution: Need to recreate the deleted properties and remove the properties in the exports and delete the properties.
Going Forward: Instead of deleting the properties we need to remove the property from the export and hide the property.
Hope this helps.

Urgent requirement : security error accessing url and http error: standalone flex

Hi,
I have a requirement to create record from standalone flex. I am using Flex builder 3.
I used Flex-force toolkit to login to salesforce. The swf file generated when used internal to salesforce it works great.
But my requirement is to run it from public sites page / standalone pages. How will I configure it? I am getting error 'security error accessing url', default HTTP
The requirement is on priority, please help me to resolve this issue.
The login code is also furnished below. please help.
Full error details:
(com.salesforce.events::ApexFaultEvent)#0
bubbles = false
cancelable = true
context = (null)
currentTarget = (null)
eventPhase = 2
fault = (mx.rpc::Fault)#1
    content = (null)
    errorID = 0
    faultCode = "Channel.Security.Error"
    faultDetail = "Destination: DefaultHTTP"
    faultString = "Security error accessing url"
    message = "faultCode:Channel.Security.Error faultString:'Security error accessing url' faultDetail:'Destination: DefaultHTTP'"
    name = "Error"
    rootCause = (flash.events::SecurityErrorEvent)#2
      bubbles = false
      cancelable = false
      currentTarget = (flash.net::URLLoader)#3
        bytesLoaded = 0
        bytesTotal = 0
        data = (null)
        dataFormat = "text"
      eventPhase = 2
      target = (flash.net::URLLoader)#3
      text = "Error #2170: Security sandbox violation: file:///C|/Users/R/DOCUME%7E1/FLEXBU%7E1/TESTLO%7E1/BIN%2DRE%7E1/TESTLO%7E1.SWF cannot send HTTP headers to https://login.salesforce.com/services/Soap/u/14.0?1000.1153011256829."
      type = "securityError"
headers = (null)
message = (mx.messaging.messages::ErrorMessage)#4
    body = (null)
    clientId = "DirectHTTPChannel0"
    correlationId = "B8A1B02E-CE17-DCBA-4894-F2E4CBEB7C04"
    destination = ""
    extendedData = (null)
    faultCode = "Channel.Security.Error"
    faultDetail = "Destination: DefaultHTTP"
    faultString = "Security error accessing url"
    headers = (Object)#5
      DSStatusCode = 0
    messageId = "41F6A90D-ECAE-EA2D-7C84-F2E4DABD72F3"
    rootCause = (flash.events::SecurityErrorEvent)#2
    timestamp = 0
    timeToLive = 0
messageId = "41F6A90D-ECAE-EA2D-7C84-F2E4DABD72F3"
statusCode = 0
target = (null)
token = (mx.rpc::AsyncToken)#6
    message = (mx.messaging.messages::HTTPRequestMessage)#7
      body = "<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/"><se:Header xmlns:sfns="urn:partner.soap.sforce.com"/><se:Body><login xmlns="urn:partner.soap.sforce.com" xmlns:ns1="sobject.partner.soap.sforce.com"><username>uname</username><password>pwdandsec token</password></login></se:Body></se:Envelope>"
      clientId = (null)
      contentType = "text/xml; charset=UTF-8"
      destination = "DefaultHTTP"
      headers = (Object)#8
        DSEndpoint = "direct_http_channel"
      httpHeaders = (Object)#9
        Accept = "text/xml"
        SOAPAction = """"
        X-Salesforce-No-500-SC = "true"
      messageId = "B8A1B02E-CE17-DCBA-4894-F2E4CBEB7C04"
      method = "POST"
      recordHeaders = false
      timestamp = 0
      timeToLive = 0
      url = "https://login.salesforce.com/services/Soap/u/14.0?1000.1153011256829"
    responders = (Array)#10
      [0] (::SalesForceResponder)#11
    result = (null)
type = "fault"
Login code:
[Bindable] public var sfdc:Connection = new Connection();
private function login():void {
Security.loadPolicyFile("http://salesforce.com/services/crossdomain.xml");
var lr:LoginRequest = new LoginRequest();
lr.username = "uname";
lr.password = "pwdtoken";
sfdc.protocol = "https";
sfdc.serverUrl = "https://login.salesforce.com/services/Soap/u/14.0";
lr.callback = new AsyncResponder(loginSuccess, loginFault);
sfdc.login(lr);

This is resolved.
I have copied the crossdomain.xml file to tomcat Root folder
and the issue is resolved.

BSP Application Error : Access Denied

Hi Gurus,
I have developed a BSP application with an input field and a search help. I am using Java script to popup the search help window and "opener.document.<form>.<field>.value=value;" to pass selected value from search help window to main page. At BSP application level I have checked "Allows Portal Integration" check box. Now, when I try to select the value from search help at runtime, I am getting an error "Access Denied". It works perfectly fine when the check box "Allows Portal Integration" is unchecked. How do I resolve this issue keeping the check box checked.
Thanks in advance
John
<* Input Field *>
<htmlb:inputField id            = "sales_order"
                   value         = "<%= controller->sale_order %>"
                   maxlength     = "30"
                   showHelp      = "TRUE"
                   onValueHelp   = "showSalesOrderHelp()"
                   submitOnEnter = "X"
                   size          = "30" />
<* Java script routine to popup search help window *>
function showSalesOrderHelp()
   newDialog =    window.open("salesOrderHelp.htm","_blank","resizable=no,height=500,width=475");

The problem is that your popup windows probably do not have their domain relaxed. (Usually popp windows are implemented in an iframe, which must also be relaxed in the same way as the main page.)

Java.sql.SQLException: Error accessing jdbc driver

Hi,
We are using WebLogic Server 7.0 as Application Server.
We now create a connection pool named regPool and
a Tx datasource named regDS.
When we get the connection from the datasource, exception occurred.
java.sql.SQLException: Error accessing jdbc driver: driverURL =
jdbc:weblogic:pool:regPool, props = {enableTwoPhaseCommit=false,
jdbcTxDataSource=true, connectionPoolID=regPool}
at
weblogic.jdbc.jts.Driver.wrapAndThrowSQLException(Driver.java:323)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:377)
at weblogic.jdbc.jts.Driver.connect(Driver.java:129)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java
:265)
So I guess that why we can't use CMP for finding data. Here is the error when we call the finder.
javax.ejb.FinderException: Exception in findAllEmr while preparing or
executing statement: 'null'
java.sql.SQLException: Cannot obtain connection after 30 seconds. ,
Exception = Access not allowed
java.sql.SQLException: Cannot obtain connection after 30 seconds. ,
Exception = Access not allowed
at
weblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:694)
According to the exception message, it looks
like the connection fail between WLS and Oracle 9.2.
Here is a scenario I think you should need to know.
I change the table-name in the weblogic-cmp-rdbms-jar.xml
to a name that doesn't exist in the database.
Then, re-package the EJB, copy it to server and restart the server.
A exception occurred that says the table doesn't exist.
So, in this case, it looks like the datasource works and
connection is fine.
Any recommendation will be appreciated.
Jimmy Chang

Hi!
I am a default user to the databse server. I connect to the database with '\' as the username and blank passoword(I mean with Network authentication may be).When I am trying to create connection using
con = DriverManager.getConnection("jdbc:oracle:thin:@DRACINAL2:BSAJ", "/","" )
it gives me followint error
ava.sql.SQLException: Null user or password not supported in THIN driver
     void oracle.jdbc.dbaccess.DBError.throwSqlException(java.lang.String, java.lang.String, int)
     void oracle.jdbc.dbaccess.DBError.throwSqlException(int, java.lang.Object)
     void oracle.jdbc.dbaccess.DBError.check_error(int)
     oracle.jdbc.dbaccess.DBConversion oracle.jdbc.ttc7.TTC7Protocol.logon(java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
     void oracle.jdbc.driver.OracleConnection.<init>(oracle.jdbc.dbaccess.DBAccess, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
     java.sql.Connection oracle.jdbc.driver.OracleDriver.getConnectionInstance(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
     java.sql.Connection oracle.jdbc.driver.OracleDriver.connect(java.lang.String, java.util.Properties)
     java.sql.Connection java.sql.DriverManager.getConnection(java.lang.String, java.util.Properties, java.lang.ClassLoader)
     java.sql.Connection java.sql.DriverManager.getConnection(java.lang.String, java.lang.String, java.lang.String)
     void textPack.GenTextFile.main(java.lang.String[])
How should I go about it?
Thanks for your help.
-Sreekanth Varidhireddy

Error accessing AS/400

Similar Messages

Maybe you are looking for