ERROR ACCESSING FUNCTION MODULE FMFK_FIKRS_READ

While crearting invoice or entering vendor invoice, the system gives me
following error.
ERROR ACCESSING FUNCTION MODULE FMFK_FIKRS_READ
PARAMETRE: IP_FIKRS IP_FMA_OBJNR
Can someone help!

Actually I got the same error. I tried to debug abap not knowing what I was doing but just looking thru. I couldn't find anything. It won't allow me to post via f-02 or fb50.
I looked at this post and found someone else had the same problem via purhcase receipt. So I tried to do purchase receipt. The error message then changed slightly to " can not access the functional module" for FM etc.
It gave me a clue that the system is probably trying to access FM area. However it wasn't active in the global setting for the company.
Anyhow, I still created an FM area and assigned it to my company.
Then the error changed to FM update profile being missing. I fixed than and guess what >>>>> the error went away and I was able to post my document.
I am not sure what error it might cause in the future postings but I think it won't be unsolvable.
Hope this also works for you guys.

Similar Messages

Error accessing function module: HELP

TO ADMINISTRATORS: PLEASE DO NOT DELETE. ADVISE WHICH FORUM TO POST.
Good Day to all SAP Gurus,
I need your help in resolving / understanding an error.
Envirornment - SAP IDES 4.7
While posting any document through FBCJ (Cash Journal), f.26 (incoming payment), f.22 etc., the below mentioned error is appearing.
Error accessing function module: FMFK_FIKRS_READ
Parameter: IP-FIKRS IP_FMA_OBJNR
When I click help (?), the following detailed message appears.
Diagnosis
The application has accessed a Funds Management or Cash Budget Management module with parameters missing or defective.
Can someone please help on this?
Points guaranteed.
Regards
Jamil

1. Please do not offer points for replies. This is clearly mentioned in the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]. It is considered impolite and is the quickest way to have someone flag your message using the Abuse Button which usually means that the post will be deleted.
2. Per the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement], please title your subject appropriately. In particular, words such as "help" don't provide any insight into your message either when viewed directly or via search. This too is a possible Abuse violation and may be deleted by the other Moderators. A more appropriate title would be "posting Cash Journal document results in error XX-YYY (FMFK_FIKRS_READ)"... and it would help the others who would attempt to reply to your message if you provided the specific message number.
3. The financials forum is for functional questions. Since you are asking about a FM I'd recommend posting this question in one of the [ABAP Forums|/community [original link is broken];. Posting in the wrong forum won't lead to an abuse report but the message is likely to be locked to discourage other users to post in the correct forum.
Edited by: Nathan Genez on Oct 10, 2008 2:20 PM

Error accessing function module: FMFK_FKRS_READ parameter: IP_FIKRS IP_FMA_

Hi,
I get this error while posting a document -
Error accessing function module: FMFK_FKRS_READ parameter: IP_FIKRS IP_FMA_OBJNR
Same error apprears in GL/AR/AP.
Any suggestion?

Hi,
Check the following notes 553048, 580494; it might solve your problem.
Regards,
Eli

Error in function module WWW_DISPATCH_REQUEST

Hi,
I am upgrading standalone ITS to integrated ITS.
In this process I refered to OSS notes number 979467. and i maintained all service files in WEBRFC service.
and when i am testing my services i am getting an error in the browser
saying:
'Error in function module WWW_DISPATCH_REQUEST'
Parameter Name Parameter value
sap-client 100
~USERAGENTTYPE M
~USERAGENTVERSION 6
~CALLED_FROM_ITS 6
~URLWGATE %_WEBRFC_HTTP_SERVICE
~SESSION SID:ANON:essap00_MIL_02:ByAZnf5VaI5DZcamNtjfwtDYdKZb5gkPV4oG3lBO-ATT
~URLIMAGEPATH C:\tmp\sapicons\
So i am not able to find an where i went wrong. Please suggest me or guide me to resolve the above error.
Thanks in advance

I am not sure this is an issue with getting the mime files for your webrfc service. If it is, please try the following:
From page 13 of the SAP document "Developing IACs with the SAP Integrated ITS"
MIME URL
MIME objects in the integrated ITS are accessed at runtime directly in the database. For this, a special ICF service mimes exists with the http request handler CL_HTTP_EXT_ITS_MIMES, which is stored in the ICF path defaulthost u2192 sap u2192 public u2192 bc u2192 its. It is used to fill parameter ~urlmime with the value /sap/public/bc/its/mimes. Also function mimeURL() returns this value as a result.
The ICF service mimes must be active if you want to execute an ITS service that accesses MIME objects.
Changes to the HTML templates are necessary only if the MIME URL in the ITS service does not contain the SAP default values.
Developing
Please also check out this OSS note 1076200 - WebReporting: Icon support for WebRFC Service
It may applies to your case.
The last parameter "~URLIMAGEPATH C:\tmp\sapicons\" may be the cause of the error.
Hope it helps.
Edited by: Danny Mak on Nov 23, 2009 8:03 PM

SYNTAX ERROR in function module CACS_BUPA_PAI_SPECIAL_CACSB1

Hi experts,
   I am trying to create business partner in SAP treasury module with role - general business partner and validity period 01/01/0001 - 12/31/9999. I am gettting syntax error in Function module CACS_BUPA_PAI_SPECIAL_CACSB1, it says
The key of internal table 'LT_BUT0BK' contains components of type 'X' or 'XSTRING'.
The "Read table LT_BUTOBK" statement is not permitted for such tables in a unicode context.
Please let me know if you have any solution for this.
Thanks in advance.
Edited by: Thanvi maraka on Apr 17, 2009 3:27 AM

Hello Thanvi
It seems that you need to apply the OSS note 1041283:
FUNCTION cacs_bupa_pai_special_cacsb1.
*"*"Lokale Schnittstelle:
DATA: lt_but0bk TYPE TABLE OF but0bk WITH HEADER LINE.
CALL FUNCTION 'BUP_BUPA_BUT0BK_GET'
       TABLES
            t_but0bk = lt_but0bk.
* einmal vorhanden -> nehmen; nicht vorhanden -> Feld muss leer sein
* mehrmals vorhanden -> Mussfeld
READ TABLE lt_but0bk INDEX 2.
IF sy-subrc NE 0.
*    READ TABLE lt_but0bk.          "NOTE 1041283   " <<<<<<<<<
     READ TABLE lt_but0bk FROM lt_but0bk.            " <<<<<<<<<
    IF sy-subrc = 0.
      cacs_s_bupaw-bank_id = lt_but0bk-bkvid.
    ENDIF.
ELSE.
Regards
Uwe

Internal error in functional module

Hi,
While the invoice is being posted in MIRO screen the system is giving the below error.
*Internal error in functional module*
*CKMW_CREATE_PO_HISTORY*
Message No. C+ 514
Thanks in advance to help me out from this problem.

Hi,
Please check if the notes 1167399, 1015136, 1280056 and 1036588 help.
regards
Waman

NO Authorization error when accessing Functional module RH_CUT_OBJECT

Hi,
I am getting NO AUTHORIZATIOn error when I am executing SE37-->FUNCTIONAL OBJECT-RH_CUT_OBJECT.
I also checked SU53 screenshot which says AUTHORIZATION CHECK SUCCESSFUL and there are no errors or missing authorizations highlighted in SU53.
I switched on the TRACE-ST01 then also the error is not captured.
I would like to know WHY am I getting NO AUTHORIZATION error.
I am already having access to T-CODE SE37, SE11, SE80, SMARTFORMS and authorization object S_DEVELOP.
I need to know this ASAP on why I am getting NO AUTHORIZATION error when I am trying to access the FUNCTIONAL MODULE RH_CUT_OBJECT whereas I am having all the required authorization required for ABAP Developer including SE37.
Is it something I need change at ABAP code level.
Please advise ASAP.

The reason is ..You do not have acess to see/acess the data this FM is trying to acess ...Debug the function module keep a breakpoint at The Raise statement see which authorization you do not have ....BTW this is my guess you are trying to demilit certain objects /infotypes using this FM and delimit basically makes that object non-usable in that system .So it is quite evident that every one will not have authorization for that .Please post in detail that what is it that you are trying to achieve using this function module .....
Also you can check with debugging which authority object is being checked before raising the message and can ask security team to get that added to your profile ....
Thanks,
Anjaneya

RFC Error while trying to access function module from business connector

Hi,
I am getting the following RFc exceptions in BC server when we invoke the service pub.sap.client:invoke fail as a flow step in Idoc_Status_Add(this service is calling a function module in sap namely ZYBC_IDOC_STATUS_ADD_FROM_BC which Adds status to Idoc (from Business Connector).But no trace of failures are recorded in sap side
except 1: rfc_failure in BC trace files under monitoring.I need to know the root cause of these errors as the same services have run finely later and IDOCs were also processed successfully without any problem.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: See RFC trace file or SAP system log for more details
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1217)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3684)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3129)
at com.wm.pkg.sap.rfc.SAPSession.invoke(SAPSession.java:437)
at pub.sap.client.invoke(client.java:297)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
could anyone throw light on how this kind of error can be resolved and why it occured?
Thanks.

What does the RFC trace file and log say? Has there been any dump on the SAP server? Check the logs and transaction st22 in your SAP system to see if the RFC-module has dumped.
My guess is the problem is in the RFC-module, I think you should start looking there.
regards,
Dionisios

Error using function module in BODS

Hi I am trying to use a function module and when I run the job I am getting a warning
R/3Callreceive warning:<RFC_ABAP_RUNTIME_FAILURE-(Exception_Key:ITAB_LINE_NPOT_FOUND)- this row is not contained in the table.
Could you help me out here to get past this error?
Cheers!

Hello,
Well, it all depends on the volume of data, if it is too much, you can eventually have time out problems. If you can, run your program in background, as a job, and at least you will never have a time out.
Best regards.

Runtime error in functional module

they given below program is a function module calling program.while am execute this program they could display the message like as
What happened?
    Error in ABAP application program.
    The current ABAP program "YSUSFUN1" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "SAPLYGROUP3 ", the following syntax error occurred
    in the Include "LYGROUP3U01 " in line 1:
    "The main program of the function "Y_INTERNAL1" does not begin with "FU"
    "NCTION-POOL"."
    Author and last person to change the Include are:
    Author "BASIS "
    Last changed by "BASIS "
Error analysis
    In program "SAPLYGROUP3 ", the following syntax error occurred:
    "The main program of the function "Y_INTERNAL1" does not begin with "FU"
    "NCTION-POOL"."
REPORT YSUSFUN1.
TABLES YSUSTAB1.
DATA IT1 LIKE YSUSTAB1 OCCURS 2 .
SELECT * FROM YSUSTAB1 INTO TABLE IT1.
LOOP AT IT1 INTO YSUSTAB1.
WRITE: / YSUSTAB1-NAME, YSUSTAB1-ROLLNO,YSUSTAB1-PHONENO.
ENDLOOP.
CALL FUNCTION 'Y_INTERNAL1'
TABLES
    IT4           = IT1 .
    LOOP AT IT1 INTO YSUSTAB1.
    WRITE: / YSUSTAB1-NAME, YSUSTAB1-ROLLNO, YSUSTAB1-PHONENO.
    ENDLOOP.
2.)
the given below program is function module definition. while at that time of execution they could display the message as
*Syntax error in program*
*Source code   LYGROUP3U01                                    Line     1*
*The main program of the function "Y_INTERNAL1" does not begin with*
*"FUNCTION-POOL".*
FUNCTION Y_INTERNAL1.
""Local Interface:
*" TABLES
*"      IT4 STRUCTURE YSUSTAB1
LOOP AT IT4.
WRITE : IT4-name, it4-phoneno, it4-rollno.
endloop.
ENDFUNCTION.

thanks
before am gone to se80 to activate the function group , am activate the function module only not activate the function group .
now am activate the function group they could not be depict the error .

Error with Function Module

Hi Guys,
I have created a custom function module ,and transported to Production server,but the thing is am getting an error like "Error generating the test frame".What could be the reason?Give me your suggetions on the same.
Warm Regards,
Mohandoss P.

Hi,
I you have complex type in the parameter list you will get this error for example generic types, xtrings, strings, object references.
But, function module can be called from programs.
Check for Oss notes if you want to solve this problem
Best regards..

Error with function module TABLE_COMPRESS?

Hi all,
What is the alternate function module for TABLE_COMPRESS?
This is going fine in 4.7 version.
But in ECC 6.0, if we use this function module we r getting SLIN error (Obsolate statements) .
How can we rectify this SLIN error?
So we have to use another funtion module for the same purpose.
Can any one help on this?
Rewards to all.
Thanks & Regards
Anu.

Hi,
I you have complex type in the parameter list you will get this error for example generic types, xtrings, strings, object references.
But, function module can be called from programs.
Check for Oss notes if you want to solve this problem
Best regards..

Error in function module for inbound processingwhile testing from we19

hi,
I have developed a custom function module for processing inbound idoc for creating material using bdc...the problem is that when i am trying to test my idoc using we19 and calling my function module in debug mode an error is displayed showing 'interface for function module is incorrect' and also i am unable to see my function module in debugging mode.It is only displaying the error message...
I have given all the parameters necessary (import,export or tables) and found no error in the interface...I think the problem is appearing before my function module is being called....Also on seeing the short dump analysis I have seen that the error is in the form 'Idocs passed to application' which is not a part of the function module developed by me...
I am unable to understand why this error message is being displayed...
Please help me out of this..

ya i know that ..But I wanted to create a simple one..moreover the problem is not with bdc....It is with the function module interface..
Also I want to ask a question that I had to define all the parameters (in the function module ) by data declaration statements in the function group top include..
If i dont do that say the first error is when i write loop at idoc_contrl ..idoc_contrl is not declared by a data statement..So IO had to write a data statement:
Idoc_contrl type table of edidc..I have seen that in other function modules (idoc inbound processing) no such data declaration is done..

Regarding Error in Function Module in Update Task

Hi All,
If a function module is called in Update Task and there is some error generated from it, it comes as an exit message unlike in a normal function module.
Is there any possible way to avoid such an exit message?
Thanks in advance.
Regards,
Garima

Hi,
The problem is I am updating Z tables in a function and also calling a function in Update task to update a different set of tables.
Now, if for some reason there is an error in Update Function module, then my requirement is that rather than throwing an Exit message (which it is presently doing) the errors coming from the function should be captured so that the user knows what was wrong with the data he entered.
Is there any work around to the above requirement? Either all the tables should be updated or none of them should be updated.
Regards,
Garima Thapar.

Error in function module ARCHIVOBJECT_GET_TABLE

Hi experts,
We are using the function module ARCHIVOBJECT_GET_TABLE to retreive
the archived scanned image and then we will attach this image in
emails.It was working previously .Suddenly this function module is giving error and I have tested the above function module in DEBUG mode.The error is due to " no entry exists in table 'SDOKPROF'.
we are able to see the archived scanned dcoument through OAAD .Why this
function module is giving error suddenly?How the entries are maintained
in table SDOKPROF?
We checked that all archiving settings are fine in OAC0 and OAC3 and RFC from SAP to IXOS also working correctly.
This function module ARCHIVOBJECT_GET_TABLE has status Not released.
the error is from the function module "SDOK_PROFILE_READ " inside the FM ARCHIVOBJECT_GET_TABLE.SDOK_PROFILE_READ also not release.Error raised is from the select query inside SDOK_PROFILE_READ.Is the problem due to the function module status not released?
Kindly suggest Me.
Best Regards,
Veena.

I have actually passed this information to our IXOS admin guy, he is still looking at it though.
In the mean time can you please pass me the <b>sample code</b> on how you guyz are actually doing this through report. I tried couple of things but I'm sure I wasn't right in framing the correct process, since you have a proved report already, it would be of a great help if you can share.
You can aswell mail it to my personal id <u>[email protected]</u>.
Thanks in advance.

ERROR ACCESSING FUNCTION MODULE FMFK_FIKRS_READ

Similar Messages

Maybe you are looking for