Error accessing Name Server Configuration

Hello,
I have installed WebAS 6.40 SP11 and deployed JDI SP11 on a single stand-alone machine, which is configured as Landscape and Name Server. When I try to access the Name Server Configuration in the DTR I get a "Server not found" error.
The URL is http://<server>:<port>/dtr/system-tools/administration/NameServerConfiguration
Where can I search for the reason? Any hints?
Regards,
Bjoern

Hi Bjorn,
 As of SP11, the name server configuration requires SSL to be accessed. Thus you need to set up your JDI box for SSL communications then the address would be:
https://<server>:<SSL port>/dtr/system-tools/administration/NameServerConfiguration
SP11 is the first SP to require this SSL access. Note that the communication between your JDI and the Name Server does NOT need to be SSL. You can use the same configuration you used before. Only the access to the name server configuration needs to be SSL.
 Hope this helps,
 --Greg

Similar Messages

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Asynchronous reserve finally failed: missing name server configuration

Hi,
can anybody give me a hint why we get these errors?
"asynchronous reserveFinally failed: missing name server configuration, no logon known -> operation will be retried name reservation : name server=http://sapcoe01.bbn.hp.com:50000/, category=SAP_DevelopmentComponentName, name=hp.com/appl/tax, reservationKey=63415681, state=FINALIZE_PENDING"
The development objects are listed in SLD with status PRERES. The Name Server location is configured in DTR with the logon data. The name server is also listed in the development configuration.
Where else could be the cause for this error?
Many thanks for any hints!

Hi Martin,
Here you can see the *_PENDING items: http://<host>:50000/dtr/sysconfig/support/NameReservationList
And here you can configure the name server: http://<host>:50000/dtr/system-tools/administration/NameServerConfiguration
The solution is to define your name server a second time with a slightly different URL. The first entry you already defined probably uses the fully qualified hostname, e.g. http://<host>.mycompany.com:50000/sld/cimom. Define the same name server again but without the domain and without the /sld/cimom path, e.g. http://<host>:50000/. Actually it should correspond to what's shown in the error message, e.g. "operation will be retried name reservation : name server=http://<host>:50000/,". When you click Save Configuration, the pending items in the queue will be processed. The only problem we have left is that "after some time" the 2nd entry we just defined dissapears and we need to configure it again (and again and again...)
Kind regards,
Sigiswald

Object Name / Name Server configuration

Hello community,
I am trying to grasp how to setup the name server configuration in the sld for use with JDI / NWDI.
What makes me wonder is that one has to provide a namespace prefix / object name in two different locations (NW04sSP09 / SR2):
1. sld -> Administration -> Section:Server Settings -> Object Name
2. sld -> Landscapes -> New Landscape... (type NWDI Systems) -> Add system to landscape -> New Hosted System ... (type SLD) -> Field "Object Server".
What is the difference between these two namespace settings?
I checked SAP Help, several SLD Guides, RKT Content, SAP Notes without finding a clear answer, sadly. I would really appreciate if someone could help clarifing this question.
Thanks
Kristian

Hi all,
short update: A test (NW04sSP9) showed that the input field for the object server name in (2) is not persisting the prefix information.
After restarting the SLD Server the field shows the prefix provided in (1).
Changing the name in (1) also updated the name of the input field Object Server in (2) after SLD server restart.
Problably the input field (2) ought to be read-only? Or is there a reason for write-mode I cannot find out?
Regards
Kristian

MDNSResponder: ERROR: Only name server claiming responsibility for ...

What can I do to correct this? It shows up on the log at every startup.
Nov 28 07:35:11 G5 mDNSResponder: ERROR: Only name server claiming responsibility for "tony [g5.local].ttp4daemon.tcp.488313864452477." is "."!
Nov 28 07:35:11 G5 mDNSResponder: ERROR: unknown result in regservice_callback: -65538

I've not seen something like that before, but next time you get that, can you dump the mDNSResponder memory with:
killall -INFO mDNSResponder
The output will go into the system.log and/or the console.log
That will help us figure out the source. Does the name: Yoshikis-Pad mean anything to you at all?

Siebel Gateway Name Server configuration error

Hi,
I installed Siebel 8.1.1.10 in Oracle Enterprise Linux 5.9. And use following command lines to configure Siebel Gateway Name Server.
/opt/siebel/8.1.1.0.0/ses/gtwysrvr/cfgenv.sh
/opt/siebel/8.1.1.0.0/ses/config/config.sh -mode enterprise
After some steps, the Configuration Wizard prompted 'Siebel Configuration Wizard failed with error. Please see the log files for details'.

You can try to use locate and search for: *.log
Tips For Linux - How to find files in Linux using 'locate'

Siebel 8.1.1.11 • Error in Siebel Server Configuration

Problem Description
Hi,
I'm trying to make the Siebel Server Configuration for a new Development Environment.
After completing the Siebel Configuration Wizard I am having the following error:
2021 2014-05-28 12:40:21 2014-05-28 12:40:21 -0300 00000004 001 003f 0001 09 srvrmgr 3672 2404 D:\Siebel\8.1.1.11.0\ses\siebsrvr\log\srvrmgr.log 8.1.1.11 [23030] ENU
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sccobjs.cpp (964) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (samisc.cpp (284) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sasess.cpp (399) err=2555932 sys=0) SBL-SCM-00028: Key not found
Please can guide me to solve this problem
Kind regards,
Christian
Error Codes
SBL-SCM-00028
Problem Category/Subcategory
Installation (installation of FPs, QFs, PSs, Product Certification & Supported Platforms)/Siebel Server
Uploaded Files
File: srvrmgr.log;srvrcfg.log

Siebel Name Server Backing File
8.1.1.11 [23030] ENU
1.2
BAkAAAAAAAA=
Persistence=partial
Type=empty
[/enterprises]
Type=empty
[/enterprises/FUSION_SES]
Type=empty
[/enterprises/FUSION_SES/servers]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Host]
Type=string
Value="fusion_server"
Length=26
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/ServerDesc]
Type=string
Value="Siebel Server Profile SIEBELSRVR FUSION"
Length=78
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Lang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncStartTime]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/Primarylang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncPlannedCompletion]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncEndTime]
Type=string
Value="000100"
Length=12
[/gateways]
Type=empty
[/gateways/default]
Type=empty
[/gateways/default/version]
Type=empty
[/gateways/default/version/VersionString]
Type=string
Value="8.1.1.11 SIA [23030] ESN"
Length=48
[/gateways/default/definition]
Type=empty
[/gateways/default/definition/name]
Persistence=full
Type=string
Value="default"
Length=14
[/gateways/default/definition/full name]
Persistence=full
Type=string
Value="Siebel Gateway"
Length=28
[/gateways/default/definition/description]
Persistence=full
Type=string
Value="Siebel Gateway Server"
Length=42
[/gateways/default/definition/enable state]
Persistence=full
Type=string
Value="enabled"
Length=14
[/gateways/default/definition/object id]
Persistence=full
Type=integer
Value=0
[/gateways/default/attributes]
Type=empty
[/gateways/default/attributes/UseDefault]
Type=string
Value="SBA_82"
Length=12
[/gateways/default/attributes/CreateDefault]
Type=string
Value="SBA_82"
Length=12

Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

Hi,
I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
Steps done:
1) DB instance prepared
2) Created Siebel installation image
3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
Here are the errors I got in the log files sw_cfg_util*.log
<EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
Does anybody know what is the reason?
Searching in Metalink and Google were fruitless..
Thank you in advance.

Just in case anybody bumps in this thread:
The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
Applies to:
+Siebel CRM - Version: 8.1.1 SIA [21111] and later [Release: V8 and later ]+
Linux x86
Symptoms
Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
The error on sw_cfg_util_xx.log is as follows,
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
Reproduce steps:
- confirm that siebel server was created before, and is stopping.
- create sh env and enter the following command to remove the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "3 - Remove Existing Configuration".
- complete the configuration wizard.
- enter the following command to create the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "1 - Create New Configuration".
- continue inputs to finish and execute the configration.
+==> you'll find "Execution Failed".+
Cause
AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
Solution
You can do either of follows,
+(1) Uninstall and Install the Siebel Server again.+
+(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
+[Step]+
Name = AddSrvrRegistryEntry
Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
Edited by: mmango on Jan 31, 2012 12:21 AM

Name server configuration

Hi all,
I have created tracks and developed DCs and it works successfully .Now,I need to create a name prefix for my DCs.Inorder to do this
1) I have confgured the name server at http://hostname:port/dtr/system-tools/administration/NameServerConfiguration
2) I added the name prefix uder name reservation in teh SLD and have enabled the sld as the name server for NWDI.
Moreover in the landscape system that i have defined, I have included the sld as name server by ticking that check box.
with this I guess the name prefix should appear in my NWDS when i try to create a new DC.But then it doesnot appear.the dropdown is in disabled mode
Kindly guide me through
Best Regards
Uma Thirugnanam

Uma,
check these threads
https://forums.sdn.sap.com/click.jspa?searchID=19166202&messageID=6549632
https://forums.sdn.sap.com/click.jspa?searchID=19166202&messageID=6577728
https://forums.sdn.sap.com/click.jspa?searchID=19166202&messageID=6518883
Thanks
Bala Duvvuri

Error in SMTP server configuration 11gR2

Hi Expertes,
I have done the below steps for configurting the notification.
1. Created an IT resource of type mail server.
2. Provided the SMTP server name in the IT Resource.
3. Modified the system configuration and set the XL.MailServer as the newly created IT resource.
4. Logged in to em console.
5.Disabled UMSEmailNotificationProviderMBean and enabled EmailNotificationProviderMBean
6. Add mailservername in EmailNotificationProvider
But mails are not getting triggered on password reset by admin and the following error is thrown in the logs:
Error sending notifications oracle.security.am.common.exceptions.NAPException: Server reported that incorrect NAP version is being used.Error sending notifications oracle.security.am.common.exceptions.NAPException: Server reported that incorrect NAP version is being used.
Thanks in advance

Hi,
I am new to this field.
Kindly bear with me & guide me how to verify the password in SM59.
I went there,but not sure of it.Please let me know.
Regards,
john.

Error accessing Application Server Control Console

I just downloaded oc4j_extended_101330.zip and installed it at
/u01/app/oracle/oracle/product/10.2.0/oc4j
I then ran the following commands:
export ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/oc4j
export J2EE_HOME=$ORACLE_HOME/j2ee/home
export JAVA_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1/jdk
export PATH=$JAVA_HOME/bin:$PATH
java -version
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
cd $J2EE_HOME
java -jar jazn.jar -activateadmin <password>
cd bin
./oc4j -start
Once the server was up and running I went to http://localhost:8888 and saw the ocj4 home page. Then I tried to access the Application Server Control Console at http://localhost:8888/em and received an internal server error 500. The logs reported this exception:
08/02/20 13:38:59.807 ascontrol: Error initializing servlet
java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
at java.awt.Font.initializeFont(Font.java:308)
at java.awt.Font.<init>(Font.java:344)
at oracle.sysman.ias.studio.app.StudioConsole.loadFont(StudioConsole.java:292)
at oracle.sysman.ias.studio.app.StudioConsole.init(StudioConsole.java:107)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2371)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4824)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4748)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2971)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:741)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:534)
I believe I've followed the installation and startup directions correctly. Any thoughts on what I might have done wrong?
Thanks

Hi,
It works with jdk 1.5 corect. With java 1.4.2 try to run oc4j using this command:
OC4J_JVM_ARGS=-Djava.awt.headless=true ./oc4j -start
Regards,
Tomas

Error in content server configuration

While creating content repository in OAC0,after filling all necessary fileds and trying to send the certificate,the below mentioned error occurs.
Error in HTTP access : If_HTTP_client>receive 1
ICM_HTTP_CONNECTION_FAILED.
Help me how to rectify...
Regards,
John.

Hi,
I am new to this field.
Kindly bear with me & guide me how to verify the password in SM59.
I went there,but not sure of it.Please let me know.
Regards,
john.

Error:access SQL Server thru java prg without specifying classpath at runti

Hi!
The prg is trying to connect to a remote Sql server Db . The prog is complied by specifying the path of sql drivers. When it is run
1)java -classpath pathofsqldivers classnm param1 param2
its working fine
2)java classnm param1 param2
its giving the error:
Exception in thread "main" java.lang.NoClassDefFoundError: com/microsoft/jdbc/sqlserver/SQLServerDriver
when i am using this class in servlet its giving the same error, there i cannot specify the runtime -classpath option as i m instanttaiting an object of the above mentioned class.
plse help me out

In case you are having a webapplication ...put your driver jar and class in which you connect to the db in WEB-INF/lib of your application
or else set the jar file in the CLASSPATH variable
hope this helps:)

Program error accessing application server

Hi, I jus tried to write a simple code to write data into application server and read tht file . But this program keeps runing in the background . whn i try to see process overview thro the transaction SM50, i can still see the program running. Can anyone tel me whether the program is correct and y am getting this background job running? its very very urgent pls help me
REPORT Zreport.
DATA: BEGIN OF ITAB_CUST OCCURS 0,
 FRSTNAME LIKE KNA1-NAME1,
 LASTNAME LIKE KNA1-NAME2,
 ORTO1 LIKE KNA1-ORT01,
 END OF ITAB_CUST.
data: itab_CUST1 LIKE STANDARD TABLE OF ITAB_CUST WITH HEADER LINE.
PARAMETER: P_FILE LIKE RLGRAP-FILENAME DEFAULT 'C:\usr\sap\DEC\SYS\global\itab1.xml'.
START-OF-SELECTION.
PERFORM GETDATA.
PERFORM DOWNLOADDATA.
PERFORM UPLOADDATA.
*& Form GETDATA
 text
--> p1 text
<-- p2 text
FORM GETDATA .
SELECT NAME1
 NAME2
 ORT01 FROM KNA1 INTO TABLE ITAB_CUST WHERE kunnr eq '0000000033'.
ENDFORM. " GETDATA
*& Form DOWNLOADDATA
 text
--> p1 text
<-- p2 text
FORM DOWNLOADDATA . "DOWNLOAD DATA INTO APPLICATION SERVER FROM INTERNAL TABLE
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE
 ENCODING DEFAULT .
LOOP AT ITAB_CUST.
TRANSFER ITAB_CUST TO P_FILE.
ENDLOOP.
IF SY-SUBRC NE 0.
WRITE: /'NOT DONE'.
ELSE.
WRITE: 'DONE'.
endif.
CLOSE DATASET P_FILE.
ENDFORM. " DOWNLOADDATA
*& Form UPLOADDATA
 text
--> p1 text
<-- p2 text
FORM UPLOADDATA . "UPLOAD DATA INTO INTERNAL TABLE FROM SERVER
OPEN DATASET P_FILE FOR INPUT IN TEXT MODE
 ENCODING DEFAULT.
DO.
READ DATASET P_FILE INTO ITAB_CUST1.
IF SY-SUBRC = 0.
APPEND ITAB_CUST1.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET P_FILE.
LOOP AT ITAB_CUST1.
WRITE: / ITAB_CUST1-FRSTNAME,
ITAB_CUST1-LASTNAME.
ENDLOOP.
ENDFORM. " UPLOADDATA

Hi,
Just add few validations
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT .
IF sy-subrc NE 0.
..error
ENDIF.
OPEN DATASET P_FILE FOR INPUT IN TEXT MODE
ENCODING DEFAULT.

IF sy-subrc NE 0.
..error
ENDIF.
Regards,
Atish

SQL server configuration Manager - WMI error.

I'm having an issue accessing SQL server configuration Manager on windows server 2012 64 bit.
Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manager SQL server 2005 and later servers with SQL Server Configuration Manager. Class does not exist. [0x8070583].
Any solution or workaround would be appreciated.
Thanks.

Thanks for the reply, the link you provided discuss the same issue but for a different class number, Invalid class [0x8004100]
The error I got is for Class [0x8070583], do you know if the proposed solution work for both classes?
Thanks again.

Error accessing Name Server Configuration

Similar Messages

Maybe you are looking for