Error accessing selected data source: PAS Cube not available

Hi all,
we were running SSM 7.0 SP04 and updated to SP05. After that accessing to PAS cubes is not possible anymore. We have tried from de SSM administrator (set kpi option), and also from the user interface (scorecard tab).
I have check the model connections (manage models) and test has been succesful.
Any help on this matter will be appreciated.
Thanks in advance.
Regards,
Alfonso

Hello Alfonso,
Have you checked the Set Scorecard Defaults option in the Admin interface? Is the PAS model still assigned to the context?
If the Model Connection test was successful, the only other option would be that you are using PAS security and your user is not associated with any PAS user under the existing Application Server Connections for that Model.
As of SP5 HF3, the application displays clear messages when encountering model connection problems. Perhaps upgrading to this HF or to SP6 it will be easier for you to troubleshoot this situation.
By the way, the SP6 is already released for customer (See SAP Note 1308704).
Hope this helps!
Best regards,
Ricardo Vieira

Similar Messages

An error occurred accessing a data source.

Hi,
I have seen many posts talking about this error but still i am facing the same issue. The process i have followed is:
1) created infopath form with receive data connection to SQL DB with plain username/pwd
2) placed the repaeating table of receive dataconnection, form has full trust
3) converted the dataconnection to udcx and stored it in data connection library of site collection
4) published the form for admin approval, and as i am the admin i have uploaded it and activated it
5) approved the dataconnection
6) i have modified the infoath settings to use SQL authen, data connection files , cross domain
But still i am getting this error:
An error occurred accessing a data source.
An entry has been added to the Windows event log of the server.
Log ID:6932
Regards,
Amarnath.
Regards, Amar.

hi,
I have found below log:
DataAdapterException, Exception Message: The database returns an error. Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.)
but i am receiving data only here is my query:
SELECT [Service Request],[Task Order],COUNT(*) as TotalTestCases,SUM(CASE WHEN [Status] = 'Completed' THEN 1 ELSE 0 END) AS Completed,
SUM(CASE WHEN [Status] = 'Blocked' THEN 1 ELSE 0 END) AS Blocked,SUM(CASE WHEN [Status] not in('Completed','Blocked') THEN 1 ELSE 0 END) AS InProgress FROM
DashBoardView where SRStatus = 'Active' group by [Service Request],[Task Order]
is my calculated columns is giving error? but when i run my wuery its giving correct output
Regards, Amar.

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

Data source executive could not be found

Hello there, I have recentley did my first dynamic website
using coldfusion MX 7. After I uploaded all the files in the server
of godaddy.com on a window platform which supports cfm, I had
realised that all the DSN routes were still
C:cfusion7\wwwroot\database\executive.Users... so I changed all the
tags to D:\Hosting\executivemalta\database\executive.Users....
Unfortunatley I keep on receiving the error Data source executive
could not be found! I have also created an access database from the
godaddy control panel and located the database to a folder called
accesscf and changed the DSN route as instructed by godaddy.
Unfortunatley that didn't even work. Could somebody out there be
generous enough to help me solve this problem? The following is the
error:
Error Occurred While Processing Request
Data source executive could not be found.
The error occurred in D:\Hosting\executivemalta\index2.cfm:
line 4
2 : <cfset MM_redirectLoginSuccess="../homepage.cfm">
3 : <cfset MM_redirectLoginFailed="../failed.cfm">
4 : <cfquery name="MM_rsUser"
datasource="#Request.DSN#">
5 : SELECT Username,Password FROM
D:\Hosting\executivemalta\accesscf\executive.Users WHERE
Username='#FORM.username#' AND Password='#FORM.password#'
6 : </cfquery>
DATASOURCE executive
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322)
Remote Address 212.56.128.21
Referrer
http://www.the-executive.biz/index2.cfm
Date/Time 08-Aug-06 11:17 PM
Stack Trace (click to expand)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
java.sql.SQLException: Data source "executive" not found.
at coldfusion.sql.DataSrcImpl.validate(DataSrcImpl.java:90)
at coldfusion.sql.SqlImpl.validate(SqlImpl.java:203)
at
coldfusion.tagext.sql.QueryTag.doStartTag(QueryTag.java:443)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:210)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Hi,
I updated Sources\SXS with fresh files and now it looks like it works?????
/SaiTech

The '' secondary data source is not a relational data source, or does not use an OLE DB provider.

Hi,
We are using Teradata as data source in SSAS 2008R2, it’s using ‘.Net Providers\.Net Data Provider for Teradata’.
In DSV, we have two data sources both using Teradata. While processing dimensions, all dimensions coming from secondary data source has error message”
The '' secondary data source is not a relational data source, or does not use an OLE DB provider.”
But we are not using OLE DB provider for now, we’ve searched some threads that named queries can be replaced for secondary ds, but since we have a lot of tables, it’s hard to implement using named queries.
Any inputs would be appreciated.

Hi memostone,
When defining a data source view that contains tables, views, or columns from multiple data sources, the first data source from which you add objects to the data source view is designated as the primary data source (you cannot change the primary data
source after it is defined). After defining a data source view based on objects from a single data source, you can then add objects from other data sources.
If an OLAP processing or a data mining query requires data from multiple data sources in a single query, the primary data source must support remote queries using
OpenRowset. Typically, this will be a SQL Server data source.
Here are the restrictions:
The primary data source should be SQL Server and support OpenRowset to the secondary data source.
Or you design the cube in such a way that rocessing for each object only needs to access data from a single data source
I recommand you refer to the following article:
Defining a Data Source View (Analysis Services):
http://technet.microsoft.com/en-us/library/ms174600.aspx
Regards,
Bin Long
TechNet Community Support

Data source 80BP_ID does not exists in source system

Hi All,
I have just started with standard content for SD module.
I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got errors namely
Data source 80BP_ID does not exists in source system
Datasource 80BP_REL not maintained.
Can somebody pls suggest a way out.
Thanks in advance..
Regards,
Rohit

Hi Rohit,
When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
Please uncheck the unrelated objects while installing the STD content.
you can select the option in the grouping as ONLY NECESSARY OBJECTS.
Regards,
Ravi Kanth

SRS Browser Role Cannot Access Shared Data Sources

I've created some reports using VS and shared data sources and deployed. I can run reports (I'm a domain admin), but users I've given system administrator roles within SRS cannot access shared data sources. However, if I embed the data source, everything
is fine. I'm pulling data from three different servers, so the shared data sources are somewhat important. I'm using SQL Native userid/passwords not windows authentication. Anybody got any ideas? I'm new to SRS. Thanks.

Hi Janetb,
I’m confused about the meaning of “cannot access shared data sources”. Are you saying the user cannot see the Shared Data Sources in Report Server, but he can render the report well? Or the user cannot render the report well because he have no permission
to access shared data sources?
If in this first scenario, means that the role of the user have no permission to View data sources. To fix this issue, we can add View data sources task to the current role in SQL Server Management Studio.
If in the second scenario, it is so strange. In my test, I add Browser role of the report to one user which has no permission to access the shared data sources, but he can render the report which retrieve data from the shared data sources very well.
To troubleshooting this issue more efficiently, could you tell us the scenario you occurred and the error message you received? So that we can make further analysis and help you out.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Power view couldn't load the model or data source because the data source type is not supported

Hi,
I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
Power view couldn't load the model or data source because the data source type is not supported.
Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
Thanks in advance

What type of SSAS install are you using?
PowerView in Excel 2013 currently only supports Tabular data sources.
Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
http://darren.gosbell.com - please mark correct answers

Error in generating data source from planning area

Hi experts! I have an error while making data source from planning area:
after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
Syntax error in program /sapapo/cl_im_extract_ex======cp
the main reason: the type /BI0/9A0IVWKNDGD is unknown
what you can suggest to solve this problem?
Thanks.

Dear Andrey Kudriavzev,
The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
Search for an OSS Note. Raise one if you cannot find the relevant notes.
Regards,
Naveen.

Error while deleting data source : Message RSO414

Hello Guys,
We have activated data source 2LIS_04_PKKANBAN and entire standard BI content . When i tried to extract data, i got 0 records initially and after that i came to know that some functions needs to be activated in ECC to extract KANBAN data.
We activated some function and deleted & filled setup tables for KANBAN and i can see data in RSA3 (368 Records). Then i tried to extract data into SAP BI. it took me 20 minutes but ended with error. "Data Source needs to be activated again as it was changed (We just activated one function only) nothing changed to data source" I activated data source again in ECC and replicate on SAP BI side but i am not able to get it in activated mode.
I tried to activate it manually and it takes 20-25 minutes but i am not able to activate it and getting error "Error when activating DataSource : MESSAGE NO RSO414 " "Error when resetting DataSource 2LIS_04_PKKANBAN to the active version". i also can't delete data source as when i try to delete it, i get the error "ERROR WHEN DELETING DATA SOURCE : MESSAGE NO RSO414" . What to do in this situation ?
Regards,
Komik Shah

Hi Rahul,
I tried it but it didn't help me.
Also there is no FM in SAP BI called RS_DATASOURCE_ACTIVATE_ALL. I have activated data source in my ERP system and replicated same on BI side as we don't have standard Transfer Rules or Transformation, i can't use RS_TRANSTRU_ACTIVATE_ALL .
Regards,
Komik Shah

Select Data Source and Microsoft Security Issue

Hi,
Tool- Xcelsius 2008, QAaWS
When I open dashboard, it gives message "Microsoft Office has identified a potential security concern" "Data Connection have been blocked. If you choose to enable data connection, your computer may no longer be secure. Do not enable this content unless you trust the source of this file." with <Enable> and <Discable> buttons.
If it Enabled then leads to "Select Data Source" screen and asks details for DSN.
At every open it shows same messages.
Please, help if anyone knows or faced this issue.
Regards,
Ashish

hi,
this is a really old post.
please could you specify your exact workflow ?
what connectors your dashboard is using?
also, what version and SP and patch are you using for Xcelsius client?
i.e. Are you up to date with latest compatibility updates?
regards,
H

Error! No data source found with name 'mynewdsname' (after asking 0 providers)

Hi all,
I am trying out the instructions given below.
http://dev.day.com/docs/en/cq/current/developing/jdbc.html
I followed them exactly but removed <cq:include script="head.jsp"/> line from the jsp since I do not have a head.jsp.
my config node settings are as follows.
But when I go to the page, I get below error message.
error! No data source found with name 'mynewdsname' (after asking 0 providers)
DB is up and running. I could not find any issue with it. Code is as follows.
<%DataSourcePool dspService = sling.getService(DataSourcePool.class);
try {
DataSource ds = (DataSource) dspService.getDataSource("mynewdsname");
%>
Any help will be great. TX

Document is outdated & for now could you please follow http://dev.day.com/content/kb/home/cq5/Development/HowToConfigureSlingDatasource.html

Error accessing selected data source: PAS Cube not available

Similar Messages

Maybe you are looking for