Error accessing sim when transferring contacts!

When I try to import my contacts from my sim card to my blackberry curve it says "Error accessing sim"First I thought the sim card was the problem, so I ordered a new one. The problem is still there. Then I use my brother's sim card and his works, as well with my father's.THEN I copied my old contacts to my brother's sim card from my old phone and tried to put the contacts from my old phone on the blackberry, and it says error accessing sim. Then I put my Dad's sim card back in the blackberry and it worked. It seems as if as soon as I put new contacts on a sim card to access on the blackberry, the blackberry won't read it.
 I'm really puzzled and have exausted every possible reason for this.
I then went to the setup wizard and Import contacts and it says all the sim cards have no contacts on it!
It can't be the sim card because it is new.
I am using an Unlocked Blackberry Curve 8300
I will greatly appreciate any help!!

Did you have any luck??? I just upgraded the software for my BB Storm 9530 and now I have the same error. My phone knows that the SIM card is there, I can still call and everything. But I can't access the contacts on the card or save new contacts to it. This is so frustrating

Similar Messages

  • Error 5 occurred when transferring an IDoc to the Business Information War

    Hello friends,
    We are getting the following error while loading orgunit hierarchy data  from R/3 to BW.
    Error 5 occurred when transferring an IDoc to the Business Information Warehouse.
    Error in send SEND_HIERARCHY_20 of the hierarchy table
    We have tried st22, sm37, bd87 but didn't find any error.
    Infosource : 0ORGUNIT
    Data source : 0ORGUNIT_HR01_HIER
    Could any one please guide me to proceed further.
    Reply will be higly appreciated.
    Regards
    Srikanth

    Hello,
    We had the same issue but allready solved it.
    You need to do a restore of your BI ystem with your source system.
    Warning: You need to open up both systems (systems must be modifiable)
    The restore will create a Basic idoc type wich now does not exists. (We30)
    With regards,
    Gary Kirkby
    BI consultant.

  • Error has occurred when transferring f

    I have problems transferring files using creative media source. Whenever i attempt to do so, an error will immediately prompt out saying 'an error has occurred when transferring file'.
    I've also tried using windows explorer, and the error this time was 'cannot copy -song- the directory or file cannot be created'.
    Anybody knows what's the problem? I've tried reinstalling the software, but it's still the same. Please help.

    <FONT face=Helv size=2>
    Here is what you should do:
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
    Note: You should also update the firmware and driver (if any) of your MP3 player.

  • I get an error when transfering contacts from Sanyo Katana to HTC One by bluetooth

    The phones will connect and start the transfer. Then the HTC will get an error but
    flashes so quickly that I cannot see what the error is. The screen then goes to
    “Unexpected error….” and stops. Is this a problem with HTC or the old Katana?
    Does anyone have a work around?

    The message says that there is something wrong with the digital 'handshake'
    that takes place when a website and Adobe try to communicate.  This could
    be caused by an error in the ebooks.com's authentication protocol, or with
    Windows software that won't let the site connect to Adobe.
    If you're using Windows 7, you'll have (to get help?) to check the security
    settings as the first step in resolving the 'issues' that Win 7 has.
    You'll end up having Windows 7 settings allowing communications with that
    website.
    Hope this helps!
    =========

  • Activation Error - Access Denied when activating windows 2008 R2

    I have a Windows 2008 R2 server, which was activate, now suddenly its giving an activation required message, when I try to apply my lic. key it gives an error
    Windows Server 2008 R2 Activation Error 0x80070005 
    Access Denied
    I want the error to be resolved.

    Hi,
    This issue may be caused by: 
    Lack of permission
    Missing registry entries
    Please try the method as Dave mentioned.
    In addition, you could refer to this article for more detail information:
    Activation Issue - The following Failure occurred while trying to use the product by: Code: 0x80070005 Description: Access is denied
    http://panerarichang.blogspot.com/2012/02/activation-issue-following-failure.html
    Please feel free to let us know if you have any update.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I can´t open FC project ( it is related to my previous post: File error: Access denied when trying to export).

    1- Are you using material with an avid codec? 
    No, I did not use material with avid codec but I wanted to export to a .avi video.
    2- What exactly are your clip settings and your sequence settings?
    Cilp setting are HDV-1080i50
    The secuence is as well HDV-1080i50
    3- What do you mean by "mac block?"
    Sorry for the word, what I mean is that My Mac collapsed. I was trying to export a video
    I was trying to export:
    I could not:
    The destiny specificated does not allow access for read/write
    Check if the folder is just a read folder or check your writing permission.
    So I tried to change permissions of the Hard Disk with OS, then, one after another some windows appeared, here first of them, and a detail:
    The system extension can´t be used
    The system extension "/System/Library/ Extensions/ACard671xSCSI.kext" was not well instaled, the it can be used. Try to reinstal it or contact manofacturer to obtain a update.
    Acept
    (NOTE: there were a lot of more windows related to differents extensions, some are: "Sustem/Library/Extensions/Apple BMC.Kext"; "(...)Apple EFI Runtime.kext" , "(...) AppleEFIRuntime.Kext/Contents/Plugins/AppleEFINVRAM-kext", etc. I have almost all captured, in case you need more details I can upload the as well).
    Then, I turn off the computer (because it stop working with all those pop ups windows) and next time I tried to turn it on, it never restart again ( it turn in but never start the OS), therefore I restarted from the DVD.
    4- What did you do when you restarted your mac from the dvd os?
       I just installed over the OS ( advised by a mac technitian), since then...
    when I start my mac some windows pop up:
    The first window says:
    One low safe start item was desactivated
    "/Library/StartupItems/DigidesignLoader" was not runnig because it has not the security protocol adjusted.
    Acept
    The others are the same with: "StartupItems/PACESupport" ,with "StartupItems/Qmaster" and with "StartupItems/SATARaid5Daemon"
    And when I try to open FC fileproject a window show up:
    Final Cut close unexpectedly while AvidV1xCodec was being used.
    I have tried ignore it and restart it a nothing works.
    AND THIS IS PRECISELY THE PROBLEM!!
    5- Does the mac see the external hard disk?
         Did you try and repair the external drive? 
         What format is the external drive?
    I have the external disk in technical service, they will try to repair it. It was in MacPlus (registrered) format, configured in Raid 0 ( two hard disk enclosed together and working as one). Now, to recaptured the tapes for the project I have purchase another hard disk ( 1 T and configured it with MacPlus (registrered) format), this new hard disk is well detected by my computer.
    My version of OS is
    Well, that all I can tell about what happen to me.
    Now, as I have said, I can´t  open the FC Project.
    I have tried to clean the user profile of FC and it doesn´t work either... need some advise..., thanks for your help!!

    lotta stuff going on.  I'm in the office now and don't expect a client for about 45 minutes.  Want to walk thru this via skype or ichat?  email me directly if you do.  [email protected]
    If not, post back and I'll try and walk thru these things. 
    Also, if you want to email me the project, I'll see if I can open it here. 

  • Error message KI203 when transferring non valuted stock cross company

    Hi,
    The posting of the stock transfers plant to plant is prevented by the error message
    KI203: Company code & is not assigned to CO area &.
    The Error is in following case :
          1. The transfer posting is carried out between plants of different company codes.
          2. The material in the issuing plant is non-valuated.
    When valuated material there is no any error .
    We are on 4.7 version ,
    Also we know that on 4.6 version the system supported this process .
    Please advise .
    Best Regards,
    Moshe

    Hi
    The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
    Hear you can maintain all the chapter id, register A or C, etc
    and then try doing GR,
    The other way and the permanent solution is
    VPRS or equivalent
    Condition class B Prices
    Calculat.type C Quantity
    Condit.category  H
    Cond.control H Condition value fixed
    Condit.origin A Automatic pricing
    In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
    Regs
    Niti Narayan

  • Error (access denied) when starting Client Runtime Audit Browser

    LS,
    After starting the OC4J instance, I try to start the Client Runtime Audit Browser. For a brief moment I see a DOS-box, then an IE-page appears saying the following:
    ======================================================
    ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://127.0.0.1:8999/owbb/RABLogin.uix
    The following error was encountered:
    Access Denied.
    Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
    ======================================================
    Any idea whether this is a local problem?
    I've tried applying the settings as mentioned in the configuration guide, but the Bypass option for the proxy is impossible to set since we do not use a proxy server.
    Your thoughts?
    Regards, Patrick

    Good morning All,
    Maybe I've got the wrong idea of what is all needed to be able to run the RAB locally, but I thought that starting the OC4J instance would be sufficient to get started.
    In the Installation and Configuration Guide the following is mentioned:
    2.7 Step 6. Configure the Web Browser for Design and Runtime Audit Browsers
    2.7.1 Add "LOCALHOST" to Your Web Browser Proxy Server Bypass List
    2.7.2 Configure the Cache Management in Your Web Browser
    2.7.3 Configure Warehouse Builder with a Net Service Name
    As said before:
    @2.7.1, we do not use a proxy (according to Internet Explorer settings) therefore I can't add 'localhost' to the bypass-list, but then again I think that it does not need to be, since there is nothing to be bypassed in the first place.
    2.7.2 has been implemented.
    @2.7.3, I added the net service name manually to TNSNAMES.ORA (since I also needed that to be able to get on to the database using TOAD and SQL*Plus).
    We do not have 9iAS integration for RAB, nor do we have OEM integration.
    Are there other things that need to be implemented? Mentioned so far have been HTTP-server and RTP services, but paragraph 2.7 does not mention anything about this. Maybe there are certain services that need to be running on the server (like HTTP and/or RTP), even though I would like to run the RAB locally?
    Where does one actually need RTP for?
    Thanks in advance.
    Cheers, Patrick

  • Error code -50 when transferring external hard disk

    I repeatedly encountered this error -50.
    I have paragon 9.01 that runs for OS X Lion and only get this error when I tried to back up my external volumes in preparation for a wipe on them.
    Any help on this error code?
    PS. The external volumes has been verified and fixed by disk utility already!

    Updates:
    I've fixed it, in a sense.
    Used my brother's win7 machine to back up files on the external disks,
    used my mac to format the external harddisks to exFAT
    transferred files on win7 to the new exFAT disks
    and everything worked nicely.
    Given, exFAT is not a good choice for backups but that's the choice I have now currently.

  • BB 8830 Error code 0x80040fb3 when downloading contacts from outlook to BB

    I tried many times to replace all my bb contacts with outlook contacts and keep getting this error message. The blackberry support suggest to run a software update on the blackberry to version 4.6.0.244 but when running the "ckeck for updates" the version 4.5.0.175 is the latest. All my contacts have been deleted from my blackberry but none have been added because of the error. How do I solve this problem? Thank you.

    Hello again,
    Sorry for the delay...there was an event this week that consumed pretty much all free time for many who regularly volunteer on these forums.
    I'm not sure I'm following you...when I navigate into the VZW download site (via the 2nd link I provided above), I find they are on 4.5.0.186, so I'm unsure where you are seeing that 4.5.0.175 is the latest from VZW nor am I sure how you are winding up back at the BB site...I can easily get, from the VZW site, a download of their latest OS package for your model device.
    Nevertheless, if what you are otherwise seeing is telling you that you need to upgrade to 4.6.0.244, then using VZW is moot anyway since they are not supporting a version that high. Consequently, your choice is to move to another carriers OS package that is at the level you require for the fix you say you need. In which case you will need to research all carriers that provide your model BB and see who sells it -- and then use that 2nd link above to find the package you need from whatever carrier has it. Then, still use the instructions provided in the 3rd link, but insert, between steps 1 and 2, the deletion of a file named VENDOR.XML -- it should be at or close to the folders mentioned in step 2.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Creative Zen 8gb- unknown error/access denied when adding mu

    This is so frustrating....please help!? I have already reformatted, disk cleanup, reset and still nothing. When I'm trying to add new music to my Creative Zen 8gb I get the both error messages : "unknown error" when using the Media Zen 'browse media' option and when using the Windows Explorer drag and drop selection "access denied". Please help I've tried almost everything and it won't copy any music not even pictures.

    What operating system do you have? Win Xp (sp2) (sp3) or Vista?
    Note: I can only help you on Win Xp (Sp2)
    Try this:
    . Go into the "Recovery Mode" on the Zen disconnected from the PC and clean-up & reboot.
    Check to see if this fixed your problem?
    Next
    . Connect your Zen to the PC
    2. Select "Organize media files in this device using Creative Media Explorer"
    3. You should have a "docked screen" ?
    4. Under Windows, Control Panel, System, Hardware, Device Manager then look under Portable Device then
    look for Blue (Yellow is bad) Creative Zen then check to see if the device is ok.
    Do this for error code (0)
    http://www.pchell.com/hardware/usbcode0.shtml
    Do this for error code (9)
    http://technet2.microsoft.com/window....mspx?mfr=true
    Check back
    BTW - I hope you are adding music to the right folder e.g. Creative Zen (My Zen) Media Library / Music
    Cheers

  • WinPE 5 error access denied when applying .wim

    Hello TechNet,
    I have been struggling with deploying surface pro 3s using DISM.  I keep receiving an access denied error when I try to apply a windows image to a brand new surface pro 3 using the latest version of DISM.  Any insight would be greatly appreciated.
    Regards,

    I ran all the cleanup commands and created a new image. I then tried to apply the image and I got the same access denied error message.  I looked at the DISM log and it said:
    2014-12-03 12:54:26, Info                  DISM   DISM Provider Store: PID=912 TID=916 Getting Provider WimManager - CDISMProviderStore::GetProvider
    2014-12-03 12:54:26, Info                  DISM   DISM Provider Store: PID=912 TID=916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    [912] [0x80070005] RestoreDirMetadata:(3768): Access is denied.
    [912] [0x8144012d]
    2014-12-03 12:54:28, Warning               DISM   DISM WIM Provider: PID=912 [RestoreDirMetadata:(3774) -> Error restoring directory metadata] c:\Program Files\WindowsApps\Flipboard.Flipboard_2014.902.1532.705_neutral_~_3f5azkryzdbc4
    (HRESULT=0x80070005) - CWimManager::WimProviderMsgLogCallback
    [912] [0x80070005] RestoreDirMetadata:(3904): Access is denied.
    [912] [0x80070005] WimCreateDirectory:(4384): Access is denied.
    [912] [0xc144012e]
    2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 c:\Program Files\WindowsApps\Flipboard.Flipboard_2014.902.1532.705_neutral_~_3f5azkryzdbc4
    (HRESULT=0x80070005) - CWimManager::WimProviderMsgLogCallback
    [912] [0x80070005] RestoreDirTree:(4665): Access is denied.
    [912] [0x80070005] WIMApplyImageInternal:(1069): Access is denied.
    2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1095 - CWimManager::Apply(hr:0x80070005)
    2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:4205 - CWimManager::InternalCmdApply(hr:0x80070005)
    2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070005)
    2014-12-03 12:54:28, Error                 DISM   DISM WIM Provider: PID=912 TID=916 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1936 - CWimManager::ExecuteCmdLine(hr:0x80070005)
    2014-12-03 12:54:28, Error                 DISM   DISM.EXE: WimManager processed the command line but failed. HRESULT=80070005
    2014-12-03 12:54:28, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2014-12-03 12:54:28, Info                  DISM   DISM.EXE:
    2014-12-03 12:54:28, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    I searched Google for those error messages but I couldn't find anything similar to what I am experiencing.

  • N8: BMP images access denied, when transfering via...

    been bugging me than i couldn't transfer my ScreenSnap images when browsing my phone via the explorer.
    after a great faff it turned out if i rename them to remove the extension. no access denied.
    little quirk i thought i'd share.
    There's no dignity in begging for kudos. Do it for the karma.

    been bugging me than i couldn't transfer my ScreenSnap images when browsing my phone via the explorer.
    after a great faff it turned out if i rename them to remove the extension. no access denied.
    little quirk i thought i'd share.
    There's no dignity in begging for kudos. Do it for the karma.

  • Error "access denied" when I browse to an OPC

    The following is generated in ICONICS OPC DataSpy when I browse to an OPC
    Item in my National Instruments.OPCLabVIEW server on a remote 2000 PC.
    ICONICS OPC DataSpy ready (free version)
    Creating Instance of "National Instruments.OPCLabVIEW" on node Nak-mis...OK
    (0x00000000, The operation completed successfully.)
    Calling IOPCBrowseServerAddressSpace::QueryOrganization()...FAILED
    (0x80070005, Access is denied.)
    Calling IOPCBrowseServerAddressSpace::ChangeBrowsePosition()...FAILED
    (0x80070005, Access is denied.)
    Calling IOPCBrowseServerAddressSpace::BrowseOPCItemIDs()...FAILED
    (0x80070005, Access is denied.)
    I am able to browse to my tag items using NI's Server Explorer and I can
    succeffully run NI example c
    lients.
    I would like to be able to verify OPC connectivity independent of an NI
    solution as we will be expected to serve data to another vendors client.
    thank you very much.
    chris

    Chris,
    currently, I do not have the setup to verify this behavior. However, for me it looks like your DCOM registration is not correctly configured.
    Remote OPC is going through the DCOM configuration/settings/access rights of your networked PCs. To enable access rights you should have a correct domain server that has correctly set up users. With the Start>Run>dcomcnfg you can specify the access rights for all the ActiveX/OPC servers on your computer.
    Start>Run>dcomcnfg
    Go to Applications tab and choose Properties of LabVIEW Datalogging and Supervisory Control Module
    Go to Security tab and verify if all the three permission catagories are correctly set for the user who tries to remotly access/launch/configure the OPC server.i>
    If you use default settings you have to make sure the default is correctly configured as well. To verify go back to Distributed COM Configuration Properties window and go to the Default Security tab.
    To start of with the basic test, I would try to be logged in to the two computers with the same user account.
    In addition, I recommend to read this Knowledgebase article - you might already have done that...
    Accessing a Remote OPC Server Using the LabVIEW DSC Module
    Remote OPC Server Communication on Windows NT/2000/XP
    Hope this helps
    Roland
    PS: For general information about DCOM/OPC you might find more info :
    www.opcfoundation.org : E.g. This pretty white-paper:
    OPC DCOM White Paper
    www.microsoft.com : E.g. This detailed: COM Security Frequently Asked Questions

  • Error 16 message when transferring Photoshop Elements to new Mac. What am I doing wrong?

    I am attempting to transfer my licensed copy of Elements to a new iMac. I've copied all the relevant files/folders from the old Applications folder to the new, and on trying to open the program on the new machine receive an Error 16 message (uninstall/reinstall). The original applications was a download, so I don't have an install disk. I'm obviously missing some files - any suggestions? Many thanks for any help!

    Do as it says - reinstall it properly.
    Download Photoshop Elements products | 13, 12, 11, 10
    Mylenium

Maybe you are looking for