Error account (GL a/c NO:) has been set as not relevent for tax

Hi,
While posting MIRO throughing error message " Error account (GL a/c NO:) has been set as not relevent for tax "
Kindly guide how to resolve the issue
Thanks & Regards
Lakshmi Kanth Reddy

Hi Reddy,
System throws up the message because the GL account you have entered has not made Tax relevant in the Control tab. 2 things I would like to point out -
a) Should you need the tax code for the particular GL account, then change the GL account master and make it relevant for tax.
b) If the tax code is not needed, then delete from the MIRO transaction and then post the document.
Important point - Mostly for all the MIRO transactions, tax code is made relevant for tax in the GL master.
Hope this helps.
Vikas.

Similar Messages

I am getting a message that says my Apple ID has been disabled. Not disabled for security reasons, just plain disabled. I changed my password and still nothing! I was told I had to pay them $29.00 for extended technical support as my warranty is up.

This is so frustrating. Why should I pay $29.00 for a problem I
didn't create. I think they flip a switch and disable to distort money!
Has anyone gotten a straight answer for this problem?
Thanks,

They're not charging you to renable your Apple ID. They're charging you for phone support, which they'd do regardless of the question. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. They may be able to help you without you having to pay for phone support.
Regards.

I just received an alert on my iPhone and Macbook that the iMessage account associated with my email has been set up with "iPad" I do not own an iPad. Can i look up all devices using my iMessage account?

Help Guys!! I want to figure out who this is before I reset everything.

There's no way you can access that information. Not even sure if Apple could.

Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

hello,
i getting the following error message in event id while backing up my SQL db by third party backing tool
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
<Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
please suggest the solution.

Hi pulkit,
According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
https://support.software.dell.com/kb/SOL14674
In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
Perform the following tasks as appropriate:
1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
2. Ensure that the backup and restore medium has sufficient space.
3. Correct any errors raised by third-party backup and restore software.
There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
http://technet.microsoft.com/en-us/library/ms187510.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is off

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?

Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again

Outbound error "No cross-system business area has been assigned to bu. area

Hi everyone,
i have idoc failed in outbound with error No cross-system business area has been assigned to business area 0001
Thanks in advance
Soufiene

Hi Fernando,
The issue is from HR , an entry for an employee was entered and suppose not it generated idoc failed.
Thanks
Soufiene
Edited by: Soufiene Tchantchane on Sep 7, 2011 10:32 PM

A download, iPhoto, Version 9.4.2, released November 2012; has been on my download page for three weeks. Despite a half dozen attempts to install it, it has never completed the download. Near the end it always says an error has occurred. What can I do?

A download, iPhoto, Version 9.4.2, released November 2012; has been on my download page for three weeks. Despite a half dozen attempts to install it, it has never completed the download. Near the end it always says an error has occurred. What can I do? The unit onto/into which I am attempting to install this is a new MacBook Air.
thank you.
Otto

Thanks LN.
I tried. It would not download. A drop down notice said an error had occurred and to return to the purchase page; which I have done on numerous occasions. (What I am to do on the purchase page I am not sure, other than to click on purchases and see that the same iPhoto download is available. By the way, this was not purchased. It just showed up with two other items free items, which did download nicely.)
Otto

I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled. I reset my password but it still does not work. What can I do?

I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled. I reset my password but it still does not work. What can I do?

Crich,
The usual reasons for an Apple ID getting disabled are either unauthorized activity or violations of the Terms & Conditions.
Submit your request to iTunes Customer Service and if appropriate, they will re-enable it.

Error!!!! Record has been updated by another user

dear all
Why i got this error when i put a value and try to write to a text item. i never change insert update etc in property pallete..
this error appear.
FRM-40654 Record has been updated by another user . requery to see change?
give me advise and suggestion why i got this error..

This message have several different causes. One cause is what wilfred indicated.
But I've seen this message appear if there's something wrong with a primary key, and I've seen it occur when doing a post command using a master-detail block. In the latter case, you need to requiry the other tables in your form.
In your case since you are using only one block, I'd look for a problem with your primary key.

Can we change customer account name once a quote has been created ?

Can we change customer account name once a quote has been created ? Currently the customer account number becomes read only when the quote header has been created. This is true for both Forms Quoting and HTML Quoting.

Presently the feature of changing customer name for Quote is not supported.

When i open my itunes of recent edition , i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

Try iTunes for Windows: How to turn off Compatibility Mode.
tt2

An error was received while reading backup file- Cancelling Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).

Hi,
We have been getting the below error while restoring a database onto SQL Server 2008. We are using lite speed and performing a full restore. When we restart the server, the restore is completed cleanly but every 3 or 4 days once, the restore is failing.
We have tried everything from installing a patch that was supposed to fix it but it is not.
Error Message:
BackupIoRequest::ReportIoError: read failure on backup device 'VDI_7D17E958-2468-45A8-B7F0-EB73D0BF0F3A_3'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
The backup is getting validated successfully but failing while trying to read it. Any help would be greatly appreciated.
Thanks,
Sree

Hello,
I would try to get the latest update for the LiteSpeed software, based on the following thread:
http://www.red-gate.com/messageboard/viewtopic.php?t=5968
Please read the following article too:
http://troubleshootingsql.com/2011/02/09/troubleshooting-that-darn-backup-error/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

TS1424 I receive a prompt that my Itunes account has been disabled, but not for security reasons as suggested. Any ideas?

I keep receiving a prompt that my account has been disabled, but not for secruity reasons. I had problems almost half a year ago with unauthorized purchases. When I asked Apple about the purchases, instead of providing answers, they said they would disable the account. Not only is that awful customer service and not answering my question, it's a HUGE pain in the butt because I just want to download some music legally!!! Does anyone in Apple Universe have any suggestions before I rip the rest of my hair out?

Thanks, I have tried changing the password 3 times to no avail. I will contact itunes support
thanks again

Error account (GL a/c NO:) has been set as not relevent for tax

Similar Messages

Maybe you are looking for