Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Similar Messages

The property with ID SI_LOGON_INFO does not exist in the object

Hi Experts,
I am writing a Java code which upload rpt report to an infoview and try to set username/password and user prompt false together.
I uploaded rpt success, however, after I add IReportLogon to add user/password. I got an error.
The property with ID SI_LOGON_INFO does not exist in the object
Code here, any suggestion is appreciated.
IPluginMgr boIPluginMgr = infoStore.getPluginMgr();
IPluginInfo boReportPlugin = boIPluginMgr.getPluginInfo("CrystalEnterprise.Report");
IInfoObjects boInfoObjects = infoStore.newInfoObjectCollection();
boInfoObjects.add(boReportPlugin);
IInfoObject boReportObject = (IInfoObject) boInfoObjects.get(0);
String boReportName = getName(filePath);
boReportObject.setTitle(boReportName);
boReportObject.setDescription(filePath);
boReportObject.getFiles().addFile(filePath);
boReportObject.properties().setProperty(CePropertyID.SI_PARENTID, folderID);
IReport Report = (IReport)boReportObject;
IReportLogon rptLogon = (IReportLogon) Report.getReportLogons().get(0);
//get error after try to retrieve rptLogon Class.
rptLogon.setPromptOnDemandViewing(false);
rptLogon.setUserName("fortest");
rptLogon.setPassword("whatever");
infoStore.commit (boInfoObjects);

Hi Adam,
Thanks for your reply.
I added this refreshProperties() method before, but after run this method, the application will no response even wait for over 2 minutes.
Do you know why?
or shall I wait for long time to resolve this issue?

The property with ID SI_DELTA_METAINFO does not exist in the object

Hi ,
when i moved crystal reprts from our Crystal server to the new BOBJ (BOExi3.1) Server and on DB configuration for all the reports i used the DB defaults that comes with the Report.
Problem when i try to run locally or run from the enterprise login it works perfect, but when i try to run the report from the Infoview it says Database Information is either Incorrect or Incomplete.
and also when i goto report and change the DB configuration it throws this error as
"The property with ID SI_DELTA_METAINFO does not exist in the object".
Please throw some light on the above error as i need to make it available for our end-users ASAP.
regards,
Sethu.

Hi Seth,
I looks like you have a configuration issue in BOE so I moved your post to the Admin forum.
You also likely have a support Contract so I suggest you create a case in Service Market Place to immediate assistance. This is a public forum that may or may not be monitored by SAP Support Rep's, depending on the case load.
Thank you
Don

The property with ID SI_FILES does not exist in the object

Hi,
We are accessing the BO reports through front End web application using WEBI. We are using BO Java SDK on the application for this purpose.
Some of our users (APAC region) has started getting the error while accessing the reports from web application. Here are the error:
com.crystaldecisions.sdk.exception.SDKException$PropertyNotFound: The property with ID SI_FILES does not exist in the object [24/01/12 13:27:39:402 GMT] 000000b6 SystemErr R at com.crystaldecisions.sdk.occa.infostore.internal.ag.getFiles(Unknown Source)
[24/01/12 13:27:39:402 GMT] 000000b6 SystemErr R at com.crystaldecisions.sdk.occa.infostore.internal.AbstractSendableObject.getFiles(Unknown Source)
Same report when accessed by the users from AMER or EMEA region, it is working fine. Can anyone help me what is the issue and how to resolve it?
Thanks,
Ashok

what version of Enterprise is this? XI 3.1, Bi 4.0? Also what version pack are you running. I am asusming that APJ and EMEA\AMER users try to hit the same web\app server\ BOE, same application and access same reports. What kind of authentication you use? Given everything else is same it's got to be security issue? Does APJ users are part of a different group in your 3rd party auth server such as LDAP or AD?
Edited by: Aasavari Bhave on Jan 25, 2012 2:55 PM

HTTP Error 404 :File does not exist

Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekhar

I have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file.

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Requested query does not exist on the current server.

Hi All,
I am facing a problem in BI 7.0 related to query view.I am able to create a view on a query and can successfully save it .But when I am trying to open it using Bex Analyzer, it throws an error that query does not exist on the current server.
Please find the steps below which I did to create a query view in BI 7.0.
1.Executed query and then clicked on save from the tool bar.It asks me to save as workbook or save as view.I clicked on save as view and gave some name to view.It saved successfully.
2.Now when in Bex I am trying to open the view , it gives the message 'The requested query does not exist on the current server'.
Please help me in solving the issue.
Regards,
Phani.

Hi,
I am facing the same problem, though some others of my views can be opened.
We had an upgrade of the system to Support Package stack 13. Maybe this caused problems.
My BEx Analyzer Version is:
Support Package 14, Patch 3, Revision 811
Philipp

Tax Code does not exist in the system (T007A)

Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, Raj

Hello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
   Master Data
    Control Parameters for Travel Expenses
     Define Global Settings
Input Tax
Country                                       { Your country here }
Enter an input tax code for 0% input tax [    ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS

"Delivery 80001021 does not exist in the database or in the archive"

hi,
i am creating delivery document and save the delivery but while I'm checking the delivery doc no the system is showing following error "Delivery 80001021 does not exist in the database or in the archive"
please help
thanks
amit

Amit,
This problem is due to a program error. Talk to your devloper in order to solve it.
I copy & paste the below text or solution from OSS 993005. Check that for complete info.
Reason and Prerequisites
The problem is caused by a program error.
Solution
Implement the attached correction instructions.
After you confirm error message VL 559 "Delivery &1 does not exist in the database or in the archive", the system branches to either
the inbound delivery (DISPLAY) that was displayed or changed beforehand, or
the inbound delivery that has just been saved (also in display mode).
If no delivery was saved before you switched to 'Other inbound delivery', the original transaction is started again (for example: VL31N).
Regards,
Sats.

PO does not exist in the system

Hi,
While creating sales order PO not given and saved the Sales order with out PO No. Again in change mode realised that PO not given and when im trying to give PO following are the error message.
Purchase order 428264 does not exist in the system (see long text)
Message no. V1583
Kindly send the responses.
Thanks
Madhu.

Hi,
I am taking two different posts from this thread:
1st:
1. Sales order been created with out PO number.
2. In the change mode system allows to key in PO number.
3. When keying in the PO number system throws an error ' PO 12345 does not exist in the system".
Now my query is how to find the right PO number.
Following are the long text.
Purchase order 12345 does not exist in the system (see long text)
Message no. V1583
Diagnosis
You are creating an order for a consolidated company and must eliminate internal business volume. For this reason, the system tries to determine if the related purchase order exists. This is not the case, however.
Procedure
Enter the relevant purchase order number
This sounds as you go to T. Code: VA02, Keyed-in your Sales Order No. and then hit "Enter". Now inside Sales Order, you are trying to key-in P.O. No.
Now, 2nd post:
Im sorry the issue is not resolved yet. The PO No which user is keying in the sales order is quite unique. When i checked the previous PO's in that series it is there. But the issue is for the given set of sales area it is not there.
Following are the steps performed:
1. In VA02 in search critria given the series (OCJ*).
2. There are set of sales orders available for the given series.
3. But these series of sales order are from different set of sales area.
4. There are no sales order available in the series for the given sales area.
Kindly suggest whether im missing any config setting?
Which suggests as you go to T. Code: VA02, and inside field: Sales Order, you Press F4 (or you have entered P.O. No. under Tab: Search Criteria).
Now, there are few queries:
1. Have you entered P.O. No. within Sales Order, while created? If not, then how come System will search for Sales Order, having specified P.O. No.?
Secondly,
If, you are searching through F4 and you have created Sales Order with the same P.O. No., then within new window that pops-up; go to tab: Sales Document according to Customer PO No.
Field: Purchase Order No.
key in your filter condition (P.O. series with appropriate *) and make Field: Maximum hits, blank. System will throw all the Sales Order, having P.O. Series based upon filter condition.
Now, SORT the output based upon either "Purchase Order No." or "Sales Org".
Hope, i have understood your query, now.
Best Regards,
Amit.
Note: Remember, if there is no such Sales Order with desired P.O. No., system will not list-out it in search. To do so, you have to attach P.O. No. within Sales Order under field: Purchase Order.

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

SSDT - Using a SharePoint list data feed as source - "column does not exist in the rowset" error

Hey guys!
So, I want to use a SharePoint list data to create a cube/tabular model, in order to make a complex analysis in PPS using MDX.
To create the tabular model, I'm using the SS Data Tools, and importing a feed from the respective SharePoint list (using the _vti_bin/listdata.svcextension and then selecting the list(s) I wanna to import).
Everything looks fine and smooth, I can select and preview the data in the table import wizard, but in the end, when importing, I always get this error IF the table has one or more row of data (if the table is empty, it's ok...) - the <...>
column doesn't exist in the rowset.
(Curiously, when I have the same procedure in PowerPivot for Excel, I have no problems, everything works fine. The problem is that then I get again errors if I try to create a tabular model on SSDT importing a PowerPivot file).
Here's the error:
Had you already tried this in SSDT? Are you experiencing the same trouble?
Best regards, and thanks in advance!
Jorge Mateus
Jorge Mateus

I noticed something else too.
I can't process Tabular Models on both SSDT and SSMS (2012), but I can process Tabular Models created on PowerPivot.
I tried to create a Data Feed connection on PowerPivot, and it was successfully created. However, if restoring the PowerPivot Tabular DB on my SSAS Tabular instance and processing (full) the model through SSMS, it won't work.
Is there anything different on PowerPivot and SSDT related with Partitioning or connections to the data sources?
Regards,
Jorge
Jorge Mateus
Update:
When trying to Restore a PowerPivot file on my SSAS Tabular Server and full process the model:
The operation failed because the source does not contain the requested column. You can fix this problem by updating the column mappings.
More Details:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb' in table 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb'.
The current operation was cancelled because another operation in the transaction failed.
X is the first column of the source table, no matter if I chose others on the PowerPivot table.
When trying to import data from a data feed using SSDT:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_ee6be81f-2235-4113-b404-cfcb20647a38' in table 'X_ee6be81f-2235-4113-b404-cfcb20647a38'.
The current operation was cancelled because another operation in the transaction failed.
X is the first chosen column to import.

Tutorial - Create a blog reader Store app (C++) - Error:The name does not exist in the namespace!

I'm trying to create my first store app based on msdn's sample.
Link to the sample:
https://msdn.microsoft.com/pl-PL/library/windows/apps/hh465045.aspx
I have problem doing last step (number 3) of part 3.
In code below in file App.xaml the compiler get the error "The name 'FeedDataSource' does not exist in the namespace 'using:SimpleBlogReader'"
<Application
x:Class="SimpleBlogReader.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:SimpleBlogReader">
<Application.Resources>
<local:FeedDataSource x:Key="feedDataSource"/>
</Application.Resources>
</Application>
In the file App.xaml.h I added line #include "FeedData.h", and FeedData.h looks like:
//feeddata.h
#pragma once
#include "pch.h"
namespace SimpleBlogReader
namespace WFC = Windows::Foundation::Collections;
namespace WF = Windows::Foundation;
namespace WUIXD = Windows::UI::Xaml::Documents;
namespace WWS = Windows::Web::Syndication;
/// <summary>
/// A FeedDataSource represents a collection of FeedData objects
/// and provides the methods to retrieve the stores URLs and download
/// the source data from which FeedData and FeedItem objects are constructed.
/// This class is instantiated at startup by this declaration in the
/// ResourceDictionary in app.xaml: <local:FeedDataSource x:Key="feedDataSource" />
/// </summary>
[Windows::UI::Xaml::Data::Bindable]
public ref class FeedDataSource sealed
private:
Platform::Collections::Vector<FeedData^>^ m_feeds;
FeedData^ GetFeedData(Platform::String^ feedUri, WWS::SyndicationFeed^ feed);
void DeleteBadFeedHandler(Windows::UI::Popups::UICommand^ command);
public:
FeedDataSource();
property Windows::Foundation::Collections::IObservableVector<FeedData^>^ Feeds
Windows::Foundation::Collections::IObservableVector<FeedData^>^ get()
return this->m_feeds;
property Platform::String^ CurrentFeedUri;
void InitDataSource();
void RetrieveFeedAndInitData(Platform::String^ url, WWS::SyndicationClient^ client);
How to solve this problem?

You're testing this too early. You haven't yet finished writing code that your current code depends on. Feeddata.cpp won't build, so you can't use the data object that hasn't yet been created.
In particular, feeddata.cpp doesn't build since it has many references to items which get added in later steps.
For example, TextHelper is added in part 5 and App::RemoveFeed is added in part 10.
You'll need to either wait until you've implemented those before you test or comment out the calls to the unimplemented features until they're done. TextHelper looks like it adds quite a bit and you're almost there, but you can probably get away with commenting
out the calls to RemoveFeed and GetTitlesFromUri for now.

An error has occurred: The plugin -65221 does not exist in the CMS

Hi,
I already raised this issue before and I thought this is already fixed. Everytime I upload this Crystal Report and try to schedule it using the RESCHEDULE window, I can't change the parameters. Everytime I click on the value of each parameter, the following error displays:
"An error has occurred: The plugin -65221 does not exist in the CMS"
What can be the cause of this and how can I resolve this? We are using Business Objects XI R2 with SP2 and Crystal Reports XI.
Thanks.

Hello Neozeke,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

An Error has occured:The plugin 65534 does not exist in the CMS (FWM 02017)

Hi,
I get the error when I click on Parameter option while rescheduling Crystal Reports from Infoview. I can schedule the reports successfully, the error is only while rescheduling.
The error is as follows:
An error has occurred: The plugin -65534 does not exist in the CMS (FWM02017)
Environment - BOXI 3.1 with Windows AD
Application server - Tomcat
Would appreciate any help.
Regards,
Anisa

Hello Anisa,
Are you able to solve the issue...
We are also getting same issue. if you are able to resolve the issue. please let us know the setps you followed it will be of great help.
Thank You,
Regards,
Satheesh Reddy. R.

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Similar Messages

Maybe you are looking for