Error activating CIF model for subcontractor PO w/component requirements

Hello CIF experts,
I'm having a problem with the CIF POs and PReqs between ECC and SCM. If the CIF model is already active, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM) then the order CIFs successfully to SCM.
However, if the CIF model is deactive, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM), then when the CIF model is activated, it fails. The error is "Product x for location y in model z does not exist".
We do not want to send all components to SCM because we do not plan components and do not want to overload SCM with additional data.
Can anyone answer why the order CIFs successfully if the model is active but why it fails when trying to activate the model?
Much thanks,
Elizabeth

Elizabeth
You have mentioned that you get an error that product X - loc Y does not exist in APO. Does this " product X" refer to the parent material or component material ? If the product X refers to component material then check your PO integration model and make sure the component is not included in the filter criteria by mistake - CFM5 tcode .
I understood your scenario and i believe that you must be able to transfer the parent subcontracting PO successfully to APO . Please delete the error queue and check your master data again in APO. Check if the parent material - location exists in APO and then create the integration model and activate it.
Thanks
Aparna

Similar Messages

I need the SPICE Model for MC145106 or the component in Multisim. Please

I need the SPICE Model for MC145106 or the component in multiSIM. Please!

Hi,
As you can see in this link the part is longer manufactured and it does not have a replacement.
In terms of functionality, you can try using the component PLL_VIRTUAL in Multisim to replace it in a high level simulation or create a new component of a replacement that you have the SPICE model of.
Let me know if you need any help.
Mahmoud W
National Instruments

Error activating integration model in APO

Hi,
I would like to have a solution to the folowing problem.
I've tried to activate integration models in ECC with transaction CFM2.
I've build several integration models for class, customer, masterdata and transaction data.
When I try to activate one of these integration models the system gives the next error message:
outbound queue blocked
Function/Q/SAPAPO/CIF_CBASE_INB
Text:        Reference product has not been classified
I would like to know what causes the problem and how to solve this problem.
I hope to receive an answer soon.
Thanks for the help!
kind regards,
Marco

Hi,
A program enhancement allows you to exclude the relationship between a product and a reference material from the transfer.
The prerequisite for this solution is that this "reference material for materials that can be packaged in the same way" is not required in SCM and is not relevant for the transfer.
Procedure:
Start transaction SMOD. Display the components of enhancement CIFMAT01. On the following screen, double-click function module EXIT_SAPLCMAT_001 (user exit '001' of function group 'CMAT', program SAPLCMAT). In the program editor that appears, double-click include ZXCIFU01. You may have to create the inlcude again if necessary. Implement the system response you want in this include (follow the sample coding given below).
Example:
DATA: LS_MATKEYX TYPE CIF_MATKYX.
LOOP AT CT_CIF_MATKEYX INTO LS_MATKEYX.
if link_to_RMATP_needed = 'X'.
    continue.
endif.
   clear LS_MATKEYX-EXTRMATP.
   MODIFY CT_CIF_MATKEYX FROM LS_MATKEYX.
ENDLOOP.
Regards
Vinod

I need the SPICE Model for DS1809 or the component in Multisim. Help mee!

Hey people, I need the SPICE Model for DS1809 (Digital Potentiometer) for Multisim. Does anybody have this?? Or any idea where to get. I searched for, but I coudn't find.
Thank you

Hi,
As you can see in this link the part is longer manufactured and it does not have a replacement.
In terms of functionality, you can try using the component PLL_VIRTUAL in Multisim to replace it in a high level simulation or create a new component of a replacement that you have the SPICE model of.
Let me know if you need any help.
Mahmoud W
National Instruments

Error Message while Activating Integration Model for PDS

Hi,
When we are trying to activate IM for SNP subcontracting PDS,it gives us an error message
"No authorization to create Product ".
All master data for that particular Product,plant and Subcontractor are in place in APO.
Product is also extended to Plant and subcontractor.
T-lane is also thr in APO which got created via CIF (Subcontracting Purchasing Info record).
Need your expertise.
Regards
Abhi

Hello Abhi..
recently I have faced same problem. If you are facing problem for particular product location, I would suggest
1) Delete the particular Product master globally in APO & re cif data
if doesnot work, then problem must be with authorization
Please revert in case of any issue
Thanks
Mangesh A. Kulkarni

Error activating logical port for service group

Hi,
I reconfigured the Starter Services because I changed the backend.
It all worked fine, but in SOAMANAGER it throws an error when trying to activate logical ports for service group /IWCNT/BPC_SERVICE_GROUP (error is thrown for all 4 service groups he wants to activate)
Configuration of proxy '/IWCNT/CO_BPC_CONT_BYID_QR_OB' failed
    Failed to create logical port for local shortcut.
         Service group '/IWCNT/BPC_SERVICE_GROUP' is not assigned to the own business system.
            Failed to create a logical port using Service Registry.
                Use profile name = 'SAPLOGONPROFILE' version = '4'
                      Failed to create a logical port for inbound interfaceCustomerERPRelationshipContactPersonByIDAndContact'            'http://sap.com/xi/APPL/SE/Global'
                             UDDI error: No Primary Services Registry maintained in this System.
I checked:
1. The provider system name
2. WSIL works fine
3. The profiles used are the same
If i take a deeper look at the service groups there where no logical ports created.
Thank you
Regards
Pit

Hi Alex,
I followed the steps mentioned in the guide (3.3.2) but it didn´t work at all.
The services uses all the same profile. The profile is importet in the SCL.
When I process the pending tasks this massages shown up:
Failed to create a logical port using WSIL (This step is red)
Use profile name = 'SAPLOGONPROFILE' version = '4' (This step is OK = green)
Target WSIL type SAP_6.40 (This step is OK = green)
Failed to create a logical port for inbound interface 'CustomerERPRelationshipContactPersonUpdateRequestC' 'http://sap.com/xi/APPL/Global2' (This step is red)
   Could not determine service using WSIL query (This step is red)
Is it normal that on the SCL, in the Business Scenario Configuration there are no entries in the Service Definitions for the Duet_Starter_Service_All scenario.
Regards

CIF Queues generated without active integration model

Hello All,
We are facing a unique issue, where queues are seen in SCM queue manager although those products are not there in any active integration model for transaction data.
The scenario is as follows:
1. We are CIFing only master data as we have only DP and release to R/3
2. There is active integration model for master data
3. There is no integration model for transaction data
However in SCM queue manager, I am seeing queues of type CFFCC "Location" "Product".
The function module name is /SAPAPO/CIF_IRQ_REDUCT_INBOUND.
We observed in R/3 that the goods movement transaction code MB1A is trigerring TRFC's which is generating the queues.
Has anyone encountered a similar scenario like this?
Regards,
Kedar

Oi Jackeline!
Hello, all!
I think Vikas got the point, but let me be more specific...
The transfer of requirement reduction depended in previous releases (until PI 2002.1) only on an integration model for material master data being active. Then a new type of integration models was created to control the sending of requirement
reduction.
To activate the new logic a flag has to be set in customizing.
Use transaction /CFC9
OR
R/3 SAP Customizing Implementation Guide
-> Integration with Other SAP Components
-> Advanced Planning and Optimization
-> Application-Specific Settings and Enhancements
-> Settings and Enhancements for Requirement Reduction
-> Evaluate the Requirements Reduction Filter Object Type:
Then, flag 'Filter Object Requirements Reduction'
If you set this flag no queue of type CFFCC* will be sent if there is no explicit active integration model for Requirements Reduction. Please set this flag in production and delete any existing queues of type CFFCC*. No new such queues should be created in the future as long as you don't activate the transfer via an integration model.
I hope this information helps to clarify this issue.
Please give your feedback concerning the given solution.
Thank you!
Will

Error on CIF activation

Dear APO experts..
While activating CIF IM I am getting following error and the material is not trasferred to APO
"System: APOCLNT660 User: ZPAPOTEST
*Function/Q/SAPAPO/CIF_PROD_INBOUND*
*Text: Too many parameters specified with PERFORM*
As I was not able to process further .....please throw lights on this issue....
Advance Thanks
Poongunran

Hi Poongunran,
Based on your symptoms, it seems there is some problem in material master data in R/3.
1) For transfer from R/3 to APO, the mandatory requirement is that MRP type in MRP 1 Tab should be XO. Please check whether it is done.
2) Also check whether all mandatory fields in Basic views, Workscheduling views, MRP views are properly maintained for the product location combination
3) Also check whether the location is first transferred to APO (and it is in active 000 model)
4) Check whether the resources in the BoM of this product are maintained properly and it is transferred to APO.
5) In CFM1 transaction, check whether the model name, logical system, APO application are entered properly
6) In CFM1 transaction, check whether tick is made against "materials" and entry of Material and Plant are made. Once you generate the integration model, carryout consistency check in foreground, it will tell you errors if any.
Please confirm
Regards
R. Senthil mareeswaran.

GUI7.20 expert model for windows 7 error

In GUI 7.10, we active the function for show keys within dropdown lists in the expert model tab when change the gui option, when we enter the key word 'M' in the industry setor field to create new material (MM01), the entire content will be filled automated as "M Mechanical engineer".
but now we setup GUI7.20, and active the function for show keys within the dropdown lists in the controls tab, when we enter the key word 'M' in the same field to create new material, the entrire content is not be filled atomated.
i ran to trouble to use this expert function, could you help me to point the reason?
change some more control fields in the GUI option or change the regedit parameter about GUI?
thank you in advance!

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
Please indicate if the system recovery ran and completed or you were unable to even initiate the recovery. depending on the exact issue, you may be able to repair the "bootmgr missing" error using a Windows 7 installation DVD. If you need a Windows SP1 disc, please see "How to Install Windows 7 Without the Disc" to download and create your own. If you have created this disc, you can boot from it and select "Repair" to attempt to fix the current issue.
Select Repair Your Computer. After several screens you will arrive at choices. Select Command Prompt. Type bootrec /RebuildBcd. Next type Exit
Select 'Startup Repair' and allow it to run. Restart the laptop.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Destination system cannot be used for classic qRFC by activating integration models

Hi All,
I am trying to connect ECC Release 702 to SAP TM 8.0 but by activating integration models(CFM2) i got following runtime error:
Error analysis
    Short text of error message:
    Destination TMCLNT100 cannot be used for classic qRFC
    Long text of error message:
    Technical information about the message:
    Message class....... "SR"
    Number.............. 320
    Variable 1.......... "TMCLNT100"
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
any one has idea how to solve that?
Thanks a lot!
Kind regards
RW

RW,
I am definitely not an expert on SAP Transportation Management. However, maybe your destination system has been set up as bgRFC instead of qRFC?
bgRFC (Background Remote Function Call) - Connectivity - SAP Library
Best Regards,
DB49

Error HRPAY99PM271 in Process Model for Offcycle (6.0 Upgrade Issue)

We have a process model for offcycle payments and need to change RPCIPE00 to RPCIPE00_OLD. The first problem we had with this was solved by OSS note 1070580. Now we are getting error HRPAY99PM271 (Parameter PNPPERID was not found in the selection parameters). PNPPERID was not used in the 5.0 version of the process model, so I do not know why we are getting this error. Thanks for any advice/ideas!

The process model was activated. Thanks.

Integration Model for the resources terminates with an error

Hi
we have deleted the existing Integration model for the Resources and trying to create a newones, when iam activating the new resource integration model it is terminating with an error "Resource already exists(mapping error occured)".
we did the consistency check for the resources and ran OM17 everything seems OK. when tried to the same in the test system it works fine...
How to rectify this..

5,
Deleting integration models for master data is a poor way to start any process.
The message implies that the offending resource probably was created locally in SCM, or perhaps to support a different Business System Group. The easiest solution is to delete the resource and then recreate via Core Interface.
Best Regards,
DB49

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Error activating CIF model for subcontractor PO w/component requirements

Similar Messages

Maybe you are looking for