Error activating DataStore Object
Hi
I have created a DSO and put in some key fields and data fields.
During activatation, I encountered the following errors. Pls help !
Internal error occurred when writing..
Error while saving change log for DataStore Object..
Error during creation of DDIC sources of DataStore Object...
Thanks !
Hi M
I can only locate this link
SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE
I cant find the following option !
SET THE PARAMATER SETTINGS FOR DSO
I then went to SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE>Performance Settings>Maintain Runtime Parameters of DSO
I try to do some settings but I cant even locate my DSO since it is not activated.
Pls help, tks.
Edited by: Lay Tin Koh on May 9, 2008 10:22 AM
Similar Messages
-
0FIA_DS11:Error when activating DataStore Object
Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMSHi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S -
Error when activating DataStore Object
Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des. -
Error while activating DataStore Object
Hi Experts,
I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
"DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
Below is the dump:
Error in the ABAP Application Program
The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN================CP " in include
"CL_RSTRAN_TRFN================CU " in
line 159:
"Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
Message was edited by: SAP BIAre you using transformations/DTP to load the DSO??
I am not sure if this helps
Note 961556 - DataStore (activation): Columns are initialized without rule
Note 974833 - DataStore (activation): Columns initialized without rule
Hope it Helps
Chetan
@CP.. -
Errors in datastore object in BI 7.0
Hi Guys,
While loading data into the Datastore object i am getting the following errors:
Getting the records into the NewData Table but not into the Activedata and Changelog Tables.It wa showing the errors like this:
Activation of Data / 26.02.2007 / 18:17:34
Main Process
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Resource error. No batch process available. Process terminated
SID Generation
Data Package 000001
Resource error. No batch process available. Process terminated
Pl send me the solution for this.I need it imdtly.
Points will be awarded
Thanks,
ChinnaHi
try to activate your ODS manually..there could be some batch processes(for background) and some update programs..when you are doing it in background you are getting that error i think..do it manually..
Hope it helps
Thanks
Teja -
Error activating ODS object.
Hi Experts,
None of the ODS objects gets activated and following are the error messages that i get when i try to activate a ODS object :
Object ZRSMODS could not be activated
<b>
"</b>
Message no. R7I028
Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325
Diagnosis
A prefix is defined for the source system for determining cross-system unique transfer structure names. This prefix is not defined between your source system T90CLNT090 and Warehouse T90CLNT090. There was probably an error when creating the source system.
Procedure
If you have not yet loaded data from this source system, delete the source system and then recreate it.
If the problem occurs again, check the SAP Support Portal. Create a new problem message, if necessary.
Error when creating the export DataSource and dependent Objects
Message no. RSDODSO169
<b>"</b>
Pls send a solution asap. Thank you for the same.Hi Aravind,
Have a look on the following points and see if they are satisfied in your case:
Check all characteristics involved as described below:
1. Check the Compounding and Attributes tabs in the characteristics maintenance.
2. All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
3. After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
Because of this you may sometimes get the same error while activating the ODS object.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps... -
Accounts Receivable Analysis: Error in DataStore object 0FIAR_O03
Hi!
I am facing with accounts Receivable Analysis Best Practice.
When I try to activate the both DataStore Oobject 0FIAR_O06 and 0FIAR_O03 in tcode RSORBCT I get the following error:
Data source 0DBDUNS_IMPORT_ATTR not maintained- RSAU231
Can some one help me to solve this problem?
Thank you very much!
AxelHi!
Many thanks for your response.
I use SAP Solution Manager EhP1 that have:
SAP BW 701 : SAPKW70102
BI CONT 704 : 0001
In tcode RSA6 I could find the Data sources 0FI_AR_6 and 0FI_AR_3.
Could you please help me how to proceed?
Thank you very much! -
Error while activation the Datastore Object
Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
YashHi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish -
Activation of Objects with Type Data Transfer Process
Hi Experts,
I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
Activation of Objects with Type Data Transfer Process
Internal Activation (Data Transfer Process )
Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
*SAP_BW 700 SAPKW70014 *
Your suggestion will be appreciated with maximum points
ThanksHello Experts,
Could you'll please help me out with this ...I
I deleted the DTP and created back again
logged out of BW and logged back again
Infact I found a SAP note 1086877 and i applied it ..but it still didint help
Whie loading the Master Data from PSA to DTP ..it worked fine.
While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
Thanks -
Error while activating data loaded into DataStore Object in BI 7.0
Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri. -
Problem in activating data in datastore object
Hello,
I have an issue while activating the data in Datastore Object.
I have been trying to load the data to cube 0FIAP_C02. I am going to write down all the process I am doing, so you will have a clear picture and advice me accordingly.
1.)Installing Business content (Cube, Datastore objects, Infosources,
Transfer strcuture and Transfer and update rules) ( 0FIAP_C02, 0FIAP_O06, 0FI_AP_1 and 0FI_AP_6 (infosources)
2.)Replicate the datasources from the R/3 side to BW side (the
datasources are replicated as 3.x)
3.) Create transfer rules and transfer structure.
4.) Create Infopackage for loading data to PSA.
Datasource 0FI_AP_1 -> Full Upload.
Datasource 0FI_AP_6 -> Init. Delta Load.
Load data for both the datasources.
5.)Migrate the 3.x datasources to "Emulated datasources". Create
Transformation between Datasource 0FI_AP_1 and cube 0FIAP_C02, also
create transformation 0FI_AP_6 to Datastore Object 0FIAP_O06.
Create DTP's to load the data from PSA to data targets.
Now is my problem,
1.)I am having errors while activating the data in ODS. (It says that errors occured during the activation of data but I cannot see an error log or anything of that kind.) I can load the data and it gives me green light but when i try to activate it gives errors.
2.)A follow up question of the activation of data is does this data goes and sits in PSA of the data mart 80FIAP_O06.And then do we have to create transformation/DTP from Datastore Object to cube (0FIAP_C02) or we are going to use the Business content transfer rules and Load the data by Infopackage.
Thanks,
Kiran Mehendale.Hi Kiran,
ad 1.) You most likely have to open a customer problem message. Maybe you try to elaborate on your issue (problem message, etc.) and we can try to assist you.
ad 2.) You can create a DTP from one persistent storage object (PSA, DataStore Object, InfoCube, etc.) to another one. Hence you can also create a DTP for DataStore Object --> InfoCube.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team -
DataStore Objects cannot be activated
During installation of FI-GL BI content, error below is encountered. As a result, all standard ODSO can't be activated. Customized datastore objects cannot be activated as well. InfoCube, multicube and other objects (except DSO) are working fine.
Wonder how to fix this issue. Would appreciate much some help.
Thanks.
sofie
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).Hi Dhanya,
Thanks much for suggestion.
Hi Sreekanth,
I have indeed checked RFC connection of BI to ECC. Anyways, have followed your idea and generally it worked. However, after fixing the RFC connection and having a "OK" status Check for BI self connection, error below is encountered upon DSO activation.
Basis is trying to fix the issue. In any case, perhaps last option would be to delete source system and recreate.
But if you have some thoughts in mind how to fix without deleting BI self source system, would really appreciate it.
Thanks a lot.
sofie
Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325
Diagnosis
A prefix is defined for the source system for determining cross-system unique transfer structure names. This prefix is not defined between your source system T90CLNT090 and Warehouse T90CLNT090. There was probably an error when creating the source system.
Procedure
If you have not yet loaded data from this source system, delete the source system and then recreate it.
If the problem occurs again, check the SAP Support Portal. Create a new problem message, if necessary. -
Error while activating ODS Object (urgent)
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki. -
Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki. -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?
Maybe you are looking for
-
how can I get round the problem I have with itunes. I have bought and downloaded various tracks to my library. When I try to sync my iphone from my PC I get a message on screen saying that it is not authorised to play them and tells me to authorise t
-
Exchange 2013 with 2008 R2, unable to connect ECP, OWA and powershell
Hi, Please find powershell error below. "VERBOSE: Connecting to EXCHNIV.IVSGU.CHN. New-PSSession : [exchniv.ivsgu.chn] Connecting to remote server exchniv.ivsgu.chn failed with the following error message : The WinRM client received an HTTP server er
-
Setting initialcontext timeout
Hello I was wondering if I could set the timeout period for creating InitialContext? For example if my server is down and I am trying to get Initial Context from this server It takes about 8 minutes to timeout and throws ConnectionException. I am usi
-
JDBC Reciever issue with Place Holders
Hi, I am working with Idoc to JDBC scenario. Where the table field names contains $ value in it. Example: T$value1, T$value2,T$valuse3 and ... so on. The special characters would not be accepted in datatype elements in XI. I found some details workin
-
Adobe Acrobat Reader 8.1.2 Installation failed.
Has anyone successfully install Adobe Acrobat Reader ver. 8.1.2? I'm running 10.5.2. Perhaps Adobe needs to put out a version for 10.5.2, d@mn it....I should have stay with 10.5.1 until other softwares are updated.