Error activating ODS object.

Hi Experts,
None of the ODS objects gets activated and following are the error messages that i get when i try to activate a ODS object :
Object ZRSMODS could not be activated
<b>
"</b>
Message no. R7I028
Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325
Diagnosis
A prefix is defined for the source system for determining cross-system unique transfer structure names. This prefix is not defined between your source system T90CLNT090 and Warehouse T90CLNT090. There was probably an error when creating the source system.
Procedure
If you have not yet loaded data from this source system, delete the source system and then recreate it.
If the problem occurs again, check the SAP Support Portal. Create a new problem message, if necessary.
Error when creating the export DataSource and dependent Objects
Message no. RSDODSO169
<b>"</b>                                                                               
Pls send a solution asap. Thank you for the same.

Hi Aravind,
Have a look on the following points and see if they are satisfied in your case:
Check all characteristics involved as described below:
1. Check the Compounding and Attributes tabs in the characteristics maintenance.
2. All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
3. After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
Because of this you may sometimes get the same error while activating the ODS object.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

Similar Messages

  • Error while activating ODS Object (urgent)

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log  --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.     
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Hi venkat,
    There are only 3 info objects which  i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
    Is this issue is related to any authorization concerned?
    Urs,
    Raki.

  • Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Frank,
    There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
    Strange i m unable to find out the solution.
    Urs,
    Raki.

  • Error activating ODS-Inconsistency DD - DB ?

    Hi BW Gurus,
    My requirement is to change the field length of one InfoObject used in ODS object(ODS_T) from Numeric 3 to Numeric 4. When doing the activation of ODS, the system prompt for continue with Activate and Adjust Database in SE14. However, some error occurred during adjusting the databse. After i corrected the error, i resume the adjustment of databse but still ended with error in Step 6. Therefore i delete the ODS Object(ODS_T) and recreate a new ODS using the same name.
    When i try to activate the ODS, ODS Object couldn't be activated, below error returned:
    The dictionary activation module could not activate all objects.
    /BIC/AODS_T00: Inconsistency DD <-> DB (check table with analysis tool)
    A table called /BIC/AODS_T00 exists in the database
    No active nametab exists for /BIC/AODS_T00
    Termination due to inconsistencies
    Table /BIC/AODS_T00 (Statements could not be generated)
    DDIC Object TABL /BIC/AODS_T00 hast not been activated
    Error when activation ODS Object ODS_T
    How can I correct this error? Please advice.
    Thanks in advance.

    Hi,
    Try Tcode RSRV.
    Run RSRV check on the DSO. If you found any error repair it.
    RSRV is a diagnostic tool in BW, System will automatically corrects if there are any inconsistencies with the BW objects
    It is used for Analysis and Repair purpose of BW objects like:
    1. Master Data Consistency Checks
    2. Transaction Data Consistency Checks
    3. Size of Dimensio tables
    4. Checking SID values
    5. PSA duplicate record check
    6. Checking Aggregates
    7. Partitions of Info cuses etc...
    You can check everything.
    Just expand it > drag n drop the required test to the right panel and give the object > execute.
    thanks,
    JituK

  • Table which stores the list of active ods objects in BW

    Hi,
    I am trying to find out the list of active ods objects starting with y and Z, Is there any table which has the information regarding that. For Infoobject I found the table as "RSDIOBJ". Can you plz let me know if there is any table for ods.
    Thank you in advance,
    Raghavendra Reddy BIjevemula

    Hi Raghu,
    u r typing it wrong..
    its "RSDODSO"..
    It will definitely work..
    which gives all available ODS.
    Regards-
    MM

  • Error while activating ODS Object

    Hi,
    I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
    -Value '20060 ' of characteristic 0CALQUARTER is     not  plausible
    -Error when assigning SID (details in long text)
    -Activation of data records from ODS object ZODS_02 terminated
    -Error getting SID for ODS object ZODS_02
    I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
    Regards,
    Raj

    Raj,
       you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
    you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
    Possibilites:
    1. updtae rules
    2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
    3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Problem with activating ODS object.

    Hi experts,
    I've got a problem with the activation of an ODS object. I've transported this single object from T to A system. First I got an error because one InfoObject was not yet transported to A. After I succesfully transported this InfoObjec, I tried to transport the ODS object again. But now the ODS object is not activated. I cannot activate it by hand also.
    The following messages appear when I try to transport/activate this ODS object:
    "No active nametab exists for /BIC/AZODEFOP50>"
    "Termination due to inconsistencies"
    "BIC/ZODEFOP00 (statements could not be generated)"
    "Tabel /BIC/AZODEFOP50 could not be activated"    
    Does anybody know what is wrong and how i can solve it? I've tried to transport this ODS object several times but always the same problem. Even if I try to create this ODS object in A system by hand under the same name: ZODEFOP, I get the same errors when I want to activate it.
    Please help me!
    Thanx in advance,
    Rgds,
    Richard
    Message was edited by:
            Richard Groot

    Hi,
    Make sure that the self system is in active form in RSA1->Source system tree.
    And also make sure the RFC destination to self system is in active form.
    Some times self sytem inactive or wrong path in destinations to self one creates the problem in the activation of ODS.Becuse it has to create a DS on ODS.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar Sharma

  • Problem in activating ods object

    Hi Everyone,
    I created a ods object from flat file, and while activating it gives problem.
    These are the error messages:
    The creation of the export DataSource failed
    Message no. RSBM035
    Diagnosis
    The creation of the OLTP source &v1& was unsuccessful.
    System response
    Whilst generating the Export InfoSource, the Metadata for an R/3 OLTP source must be generated. An error arose when doing this.
    Procedure
    Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
    What can be done, can anyone suggest me please.
    Thanks,
    Prashant.

    Hi Prashant,
    Check the notes 459027 and 380425.
    Hope it helps.
    Cheers
    Anurag

  • Error activating DataStore Object

    Hi
    I have created a DSO and put in some key fields and data fields.
    During activatation, I encountered the following errors. Pls help !
    Internal error occurred when writing..
    Error while saving change log for DataStore Object..
    Error during creation of DDIC sources of DataStore Object...
    Thanks !

    Hi M
    I can only locate this link
    SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE
    I cant find the following option !
    SET THE PARAMATER SETTINGS FOR DSO
    I then went to SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE>Performance Settings>Maintain Runtime Parameters of DSO
    I try to do some settings but I cant even locate my DSO since it is not activated.
    Pls help, tks.
    Edited by: Lay Tin Koh on May 9, 2008 10:22 AM

  • Error while activating ods

    Hi all,
    i have the following errors turning up while activating ods.
    1. creation of export data source failed
    2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
    3. error when activating ods object
    Can anyone let me know how to rectify it.
    regds
    hari

    Hi,
    The problem is with ur Source Sys connection..
    Above problems will be solved by restoring Source System Connection...  Ask your Basis team to restore SS.
    Thanks

  • Error While Activating ODS in BW

    Hai Experts
    While Activating the ODS the following errors are occurs
    The creation of the export DataSource failed
    RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
    Error when creating the export DataSource and dependent Objects
    I am using IDES BW 3.1C.
    Kindly suggest me a solution.
    Balaji VK
    09342501065
    Error when activating ODS Object SALEODS

    hi,
    also take a look this
    Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met

  • Error when transporting ODS Object

    Hi All,
    I got the following error when transporting ODS object.
    "The creation of the export DataSource failed"
    "RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
    "Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
    Maybe somebody can help me.
    Thanks a lot and appreciate that,
    -Martin-

    hi Martin,
    check oss note 597326 - Activating ODS: Error when creating the export DataSource
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

  • Error in Activation ODS - Version BIW 3.5

    Dear
    I have created infosource,info objects,application components & I have assigned data source & the Transfer & Communication structure was also established.
    I Have created ODS in the Info provider  & Saved. But when I am activating ODS Object, the following error messages are coming :
    " STDO: Log  could not be written on output device T" &   " The creation of the export DataSource failed"
    Kindly

    Hi,
    Usually Activation takes huge space. When you check the system when there is no activation in the system , you may feel that there is enough space. Check the note mentioned in:
    Re: ODS Activation Error
    With rgds,
    Anil Kumar Sharma .P

  • Error in ODS activation/export datasource

    Hello Gurus,
    When I am activating an ODS 0CFM_O01, it gives the foll error. can u pls guide. thanks in advance
    DataSource 80CFM_O01 does not exist in source system BWCLNT700 of version A     
    Error when creating the export DataSource and dependent
    Error when activating ODS Object 0CFM_O01
    rgds

    hi,
    take a look oss note 597326-Activating ODS: Error when creating the export DataSource.
    base on that note, the activation error coz dependent object(s)-infoobjects not active, to eliminate the error we have to first have all the objects active. you may try in business content installation, collection mode 'manual', put 0CFM_O01, grouping 'only necessary objects', right click 0CFM_O01 and choose 'install all below' then 'install'. hope this helps.
    note 597326
    Activating ODS: Error when creating the export DataSource
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

  • Unable to see ODS Object in BEx.

    Hi all,
    I am unable to see an ODS object in BEx, which is an active ODS Object with data in modelling.
    Can any one show me a way out, how to find this ODS object in BEx as well.
    Thanks in advance,
    Regards.

    Hi Robert Zovic
    Thanks for your answer,
    When I switced on th same..following is the eror message:
    The BEx Reporting was switched on for ODS object 0RPM_DS02 ---> long text
    Message no. RSDODSO157
    System response
    When activating ODS object 0RPM_DS02 SIDs have to be got for all characteristic values in the ODS tables, provided that these characteristic values are not already assigned any SIDs. This is required because the SIDs are used in BEx Reporting.
    The activation of ODS object 0RPM_DS02 can thus take a while longer.
    Procedure
    If the activation of ODS object 0RPM_DS02 terminates due to timeout you have to activate the ODS object with the program RSDG_ODSO_ACTIVATE in the background.
    I'm working on this, is there any other way out for the
    same.
    Thanks.
    Regards.

Maybe you are looking for