Error activating of new data to active data in DSO?

hi friends,
in DSO i want move data from new data to active data , i selected request num and trying to activate, i am getting error, how can i solve it.
Activation of Data / 24.07.2007 / 18:56:08
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Resource error. No batch process available. Process terminated
SID Generation
Resource error. No batch process available. Process terminated
Preprocessing and Postprocessing / 24.07.2007 / 19
Activation of M records from DataStore object DSO_ANI terminated
ple let me know how can i solve
regards
suneel.

Hi Suneel,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri.

Similar Messages

Activation of new data in ODS results in errors. Urgent.please help...

Dear experts,
I have a problem while I load data from one ODS object into another one. I have some keyfigs which when loaded into the ODS are ok. (I mean the new data is ok) but the moment I activate the request, the keyfigures are turned automatically to zero. This peculiar performance is not observed in any of our development and certification systems. Another thing, is that the data load is an initial load and there exists nothing in the change log table as well before the load.
Any thoughts are highly appreciated. Any SAP notes on this issue??? Please help... urgent...
Kind Regards,
Shravan

Hello Prasad/Rohini,
Thanks for helping me. Yes, I checked the update rules and they are ok. The problem is not with the update rules, I guess. I delete the data first in ODS 1 and from ODS2 I load the data into ODS1. The data load is an init update. After loading the data, before activating the request, The new data is all ok. The key figure data is all as that is guided by the corresponding update rules. The moment I activate the request, the active data is all wrong. My Question is why the table containing new data is correct and after not after activating???
Since it is an initial update, I do not think change log should come into picture???
Any ideas???
Kind Regards,
Shravan

Flat File Active Sync - Notify admin incase of data processing errors

Dear Friends,
We have couple of Requirements to use OOTB flat file active sync adapter
1. To read data from a flat file and update the records in Sun Identity Manager system
2. Notify admin if there are any data processing errors while reading data from a flat file. The data processing errors can occur if there is an invalid data. for example, lets say the input flat file has 3 columns defined, but the file conatins records which has four values.
firstname,lastname,email
testfirst,testlast,[email protected],12345
Req#1 is working fine. There are no issues with that.
Req#2: if the file contains invalid data, i noticed that the active sync adapter throws an Array Index out of bound exception. so, we need to send an email notification to the admin whenever data processing errors occurs.
I noticed that whenever the data processing exception occurs, the active sync adapter stops processing records and the active sync input form was not triggered. Unless active sync form was triggered, it's very difficult to determine whether the data was read successfully or not.
Please let me know if there are any configurations/customizations to me made on OOTB flat file active sync adapter to handle data processing errors and send email notifications to administrators.
Appreciate your help
Thanks
Vijay

Hi,
We have same requirement that
"Notify admin if there are any data processing errors from a flat file.
The data processing errors can occur if there is an invalid data or account is locked etc..."
In short notify admin if any error logged in Active sync Log file while active sync runs.
Yes,I noticed same that whenever the data processing exception occurs, the active sync adapter stops processing records and the active sync input form was not triggered. Unless active sync form was triggered, it's very difficult to go ahead to meet the requirement.
Please let me know if there are any configurations/customizations to me made on flat file active sync adapter to send email notifications to administrators.
Thanks,
Sudheer

Problem in Activating from New data to Active data in DSO

Hi All,
For my DSO I am fetcdhing some fields from other DSO table , through END Routine ,. After running the DTP , I am getting data for the fileds which i am fetching through routine in New data Table.
After Activating the New data table to Active data table I cant able to see my data.
ie in Active data table there is no data for the fields which i am fetching through end routine after activating the request . One more thing my request is activated sucessfully.
it shows ready for reporting.
Please help me on this................................

Hi ,
After unchecking the checkboxes mentioned in my previous post and still if you dont find data in active table then I think the problem might be because of Database Statistics not being up-to-date for your ODS tables which causes a delay in data load completion process. You can try refreshing the Database Statistics of your ODS both tables and indexes (active data table, change log table and new data table). This probably may resolve your problem.
Srikanth.

Incorrect data after activating the request through Process chain.

Dear SDN chaps.
Today morning. I encountered a strange issue in DSO..
I have DSO which is updating from the AL11(application server) flat file.
While i am loading it to PSA there were no issues and after loading it to the DSO there is no issue and its passing through the routine and the data is populating properly in NEW data Table .But after successful activation of the request through process i am getting the wrong records in active data table.
Then i deleted the request and reran it manually i mean triggered the DTP and ran the manual activation surprisingly accurate records are coming through manual process..
I am just wondering why it is not working through process chain and why it is showing incorrect records through process chain execution and how it is showing accurate records through manual uploading process..'
Could some one please help to come out from this..By the way mine is SAP BI 7 SP20 &SP05 for BW 7.01
Thanks
K M R

Hi Pra
Thanks for your response..
We are doing PSA deletion and then we are uploading the data to PSA as well as DSO.
Now the issue is not in the part of loading we are facing the issue in Actiation of request if i am executing the activation through process chain it is sucess but the values are incorrect. If i am doing the manual activation it sucess with correct data.
Even i tried with a new chain but still i am facing the issue.
Surprise thing is in new data table the data is perfect in both the ways like manual upate and Process chain update only during activation i am getting incorrect record in the active data table..
Appreciate your help on this....
Thanks
K M R
Edited by: K M R on Jul 9, 2010 11:09 AM

CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED

dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regards

Dear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj

Going form Note 2 to Note 4, can I use wifi and xfer data before activation

Already have Verizon. I want to update the Note 4 first,move over my apps and data before activating the Note 4, can I do this?
When I do, do i use the SIM card in the Note 2 in the Note 4?

PhilF61
I definitely want to make sure your new phone will be up and running just the way you want! The best way to fully transfer data will be to back up your current phone and then activate the new phone to transfer. Purchase history will be stored if you use the same Google account, and you can backup data using Verizon Cloud too: http://vz.to/1udgXIg
RuthW_VZW
Follow us on twitter @VZWSupport

PPM Integration Model Activation did not send delta change data

Hi all,
I have an integration model of PPM's. I activated the PPM for the initial transfer.
When I create a new prod. version, I created a new version of the model for PPM, above the previous active one.
When I activated the new version of model, the system tried to send all data.
I supposed that the system would only send the changed data, because the previous model is active.
but the system sent all PPM's
and it takes too long.
Would you please answer why does the system react like that and what must we do?
Mehmet

Hi
In order to check what is occuring, in your ERP system look at Table CIF_PPM_CHANGED, this will tell you the Material, Plant and Prod Vers of your PPM,s. It also has a field CHANGED to tell you if any changes have taken place and a field PROCESS, which should be set to "X" if the change has passed over to APO.
Check the values in your table to see if this has been set. It should only send the delta records where there is a value in CHANGED and PROCESS=" ".
Also check to ensure that people are not changing the Bills of Material or Routings etc, as this will also resend the PPM´s.
Regards
Ian

Activity without date type "Actual Date"

Hi experts,
Does anybody use activities without date type "Actual Date"(000000000002)?
I created a new date profile and assigned it to a transaction type,
then warning message "Date type "Actual Date" does not exist in the activity
" (CRM_APPOINTMENT062) occurs.
The message was origninally created by note 428436.
The note describes "certain date types are required in the reporting and for the index update".
I don't know what is "the reporting and for the index update".
I'm afraid if something bad happens without the date type.
Regards,
Fukuhara Yohei

Hi,
Whenever activity (or any other one oder document) is created, an entry will be made in CRMD_ORDER_INDEX table. When system looks for the transactions, it first checks if a corresponding entry is there in this or not. That's why indexing is improtant for effective search to happen.
So the note means that in absence of Actual Date date type, system may lead to improper update of the index table and also reporting of activities may be affected.
Regds,
Raghu

How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc.

How to get from Apple (officially) details on my iphone 5 (knowing the serial number): model, date of sale, the date of activation, etc. I bought a new iphone 5 on ebay.com - he was used. For a decision on my case ebay asks for this information ...

Apple will never reveal that info to you, since you were not the originally purchaser. However, you can get the date of sale by entering the SN here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Warranty starts on the date of sale, which is most likely the date of activation, but not necessarily so.

DSO upload and no data in Active data table

Hi Experts,
I have a strange problem.I have loaded data to DSO from DS in BI7. It has the further uplaod to cube.I have activated the DSO and it went sucessfull and had Request ID generated. It has added and transfer records available like 150000 records as I have done full upload. strangly I cannot see any data in Active data table.
Pls advise how can I check the data I am doing some mistake.I have data mart status for this DSO. the deletion of the DSO and reloading could that create the data not visible in DSO even after activation
Pls advise.
Tati

Hi,
I believe this got something to do with the display setting.. After displaying the data, get into the settings menu and look for Layout option --> display --> see if there is any default setting applied.. change this setting to something else.. create a setting with all the columns dragged & dropped.. These are the options you can try..
If this did not resolve.. please try displaying the data from SE16 transaction and post us the results..
Thanks,
Naren

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC)

I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC). It's driving me mental and has stopped me putting anything new on for months. Help!!!

http://support.apple.com/kb/TS2690

Buffer busy waits on UNDO data in Active Dataguard

Oracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.
We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.
Below is what i got from statspack report for one hour
Snapshot       Snap Id     Snap Time      Sessions Curs/Sess Comment
~~~~~~~~    ---------- ------------------ -------- --------- -------------------
Begin Snap:      18611 21-Feb-13 22:00:02      236       2.2
End Snap:      18613 21-Feb-13 23:00:02      237       2.1
   Elapsed:               60.00 (mins)
Top 5 Timed Events                                                    Avg %Total
~~~~~~~~~~~~~~~~~~                                                   wait   Call
Event                                            Waits    Time (s)   (ms)   Time
buffer busy waits                                2,359       2,133    904   76.2
reliable message                                 7,210         179     25    6.4
parallel recovery control message reply          8,831         109     12    3.9
CPU time                                                       100           3.6
latch free                                          13          85   6574    3.1
Host CPU (CPUs: 16)
~~~~~~~~              Load Average
                      Begin     End      User System    Idle     WIO     WCPU
                       1.07    0.82      0.68    0.39   98.88    0.00Since this is 11g version I was able to drill down on the segment on which buffer busy waits were occurring by using v$active_session_history on Active Dataguard.
SQL> select count(*),p1,p2 from v$active_session_history where event='buffer busy waits' and sample_time between to_date('21-FEB-2013 21:55:00','DD-MON-YYYY HH24:MI:SS') and to_date('21-FEB-2013 22:09:00','DD-MON-YYYY HH24:MI:SS') group by p1,p2
COUNT(*)         P1         P2
      2136          3      99405
        17          3       7293
SQL> select owner,segment_name,segment_type from dba_extents where file_id = 3 and 99405 between block_id AND block_id + blocks - 1
OWNER                          SEGMENT_NAME              SEGMENT_TYPE
SYS                            _SYSSMU14_1303827994$     TYPE2 UNDO
SQL> select owner,segment_name,segment_type from dba_extents where file_id = 3 and 7293 between block_id AND block_id + blocks - 1;
OWNER                          SEGMENT_NAME              SEGMENT_TYPE
SYS                            _SYSSMU11_1303827994$     TYPE2 UNDOThought to check the SQL_ID which were waiting on this buffer busy waits.
SQL> select count(*),sql_id,session_state from v$active_session_history where event='buffer busy waits' and sample_time between to_date('21-FEB-2013 21:55:00','DD-MON-YYYY HH24:MI:SS') and to_date('21-FEB-2013 22:09:00','DD-MON-YYYY HH24:MI:SS') group by sql_id,session_state order by 1;
COUNT(*) SQL_ID        SESSION_STATE
         1 cvypjyh0mm56x WAITING
         1 02dtz82as4y42 WAITING
         1 80gz2r4hx1wrj WAITING
         2 6tfk1t4mwt7hu WAITING
         9 0q63qhsbqmpf0 WAITING
        12 0jgnx96ur0bmb WAITING
        12 7pguapqcc6372 WAITING
        14 4t6hqk5r2zbqs WAITING
        18 1qwt0qkd59xj3 WAITING
        23 5phgg8btvhh6p WAITING
        23 banp2v6yttym7 WAITING
        30 a1kdmb1x084yh WAITING
        30 8hxuagk22f8jz WAITING
        30 9r0nysyp360hn WAITING
        31 cackx62yu477k WAITING
        32 40zxqg1qrdvuh WAITING
        32 0jqrd56ds1rbm WAITING
        32 7009zmuhvac54 WAITING
        38 1jb37ryn1c871 WAITING
        60 aum74caa623rs WAITING
        63 cr8mv0wawhak9 WAITING
        63 3xgk3vsh3nm08 WAITING
        86 3k9cq3jv0c3rg WAITING
        95 0sy9vjuutgwqu WAITING
       122 bhn2kk76wpg12 WAITING
       134 4pkfqgyt7rh34 WAITING
       139 1sbzsw7y88c7t WAITING
       146 92y0ha2nqd6zj WAITING
       163 djjqcp1sg2twb WAITING
       173 arxq6au12zazw WAITING
       256 fa0gzxmgyyxj2 WAITING
       282 2f17qywcgu751 WAITINGSo top 10 sql_id's were on tables TAB1 and TAB2 under schemas SCHEMA1 to SCHEMA8.
Checked DML's occurred on Primary using dba_tab_modifications view since last stats job ran on these was about 10 hours ago from when the issue occurred on Active Dataguard.
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES from dba_tab_modifications where TABLE_NAME='TAB1' order by 3;
TABLE_OWNER               TABLE_NAME              INSERTS    UPDATES    DELETES
SCHEMA1                    TAB1                     4448          0       3728
SCHEMA2                    TAB1                     4547          0       4022
SCHEMA3                    TAB1                     4612          0       4152
SCHEMA4                    TAB1                     4628          0       3940
SCHEMA5                    TAB1                     4719          0       4258
SCHEMA6                    TAB1                     4809          0       4292
SCHEMA7                    TAB1                     4853          0       4356
SCHEMA8                    TAB1                     5049          0       4536
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES from dba_tab_modifications where TABLE_NAME='TAB2' order by 3;
TABLE_OWNER               TABLE_NAME                  INSERTS    UPDATES    DELETES
SCHEMA1                    TAB2                        25546          0      26360
SCHEMA2                    TAB2                        26728          0      27565
SCHEMA3                    TAB2                        27403          0      27763
SCHEMA4                    TAB2                        27500          0      28149
SCHEMA5                    TAB2                        28408          0      30440
SCHEMA6                    TAB2                        30453          0      31906
SCHEMA7                    TAB2                        31469          0      31988
SCHEMA8                    TAB2                        32875          0      34670 But confused about Why there could sudden spike of demand on UNDO data in Active Data Guard ? Could any one please shed some lights on finding the reason for this issue ?

But confused about Why there could sudden spike of demand on UNDO data in Active Data Guard ? Could any one please shed some lights on finding the reason for this issue ?It's been interesting, The job runs only on ADG?
Even it is only reporting purposes, Which runs only select statements. Are you sure that issue is only because of this job?
Moreover am interested to know, How you able to monitor at the same time? Using EM?
What all are the jobs ran on primary at the same time?
Then, is it possible to run the job on primary and see whats the response?
I suggest you to run the same job again on standby and see the ET of the job and also gather the statspack to check whether you got same buffer busy waits or not.
What storage you are using for primary and standby? In terms of I/O and performance all are same?
You got chance to take statspack even on primary database?
What are the parameters differ in primary and standby?
Also check this note, Heresome work around provided.
*Resolving Intense and "Random" Buffer Busy Wait Performance Problems [ID 155971.1]*

What are the pros and cons using Active Data Guard vs Data Guard?

My understanding is that Active Data Guard is an additional database option for Oracle 11gR2 Enterprise Edition. I need to know the pros and cons using Active Data Guard vs Data Guard in order to decide whether to get pay extra for the Active Data Guard.
Thanks for any help.

Hemant K Chitale wrote:
Before jumping in to Active Data Guard, one needs to evaluate :
a. Is there really a need to run queries on the Standby ? The Standby could / should be at a remote site so queries are "across the network". Depending on the nature of the queries and the volume of output, the "performance" of the queries may not seem to be the same.
b. If the database is not in Maximum Protection mode, the data "seen" at the standby may not be in "real-time" synch
c. Not all applications are truely read-only when querying. Some applications use "jobs" that write to tables when querying. Such would not work with Active DataGuard. (example : EBusiness Suite). There are very complicated ways of handling this -- and one needs to consider if the complications can be introduced and supported.
Over the network accessing standby read only is really not an good idea, I think no one will compare performance with primary and standby,
But some of them they want to validate data which are very critical, as it is matching with primary or not, Its an added advantage with ACTIVE DATAGUARD
Prior to that until unless stop MRP, open database and then we need to validate, So there is an interruption of recovery, I can say its also an advantage where there is no interruption of recovery.

Error activating of new data to active data in DSO?

Similar Messages

Maybe you are looking for