Error Activating the ODS data
Hi Guys,
I am facing an error while activating the data in the ODS.
The data is loading perfectly fine but when activating the ODS data the following error is coming
<b>Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
System error occurred (RFC call)
No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )</b>
This is happening after we had a BWQ refresh .
I thought this has something to do with the BASIS guys but they say they checked everything.
Need Help
Hi Sidhu,
There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
I checked the RESREQDONE table but I dont see these requests in there.
I checked the SM58 there I saw a lot of errors
<u><b>ALEREMOTE RSAR_TRFC_DATA_RECEIVED BWQCLNT641 10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW</b></u>
one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
Regards
Majeed
Similar Messages
-
Error while activating the ODS (high priority ticket)
Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
RakeshHi,
ODS activation error
Re: ODS Activation Failed with Status 5
ODS activation is failing with incorrect with status 5 erro
Re: Error Activating the ODS data
ODS Activation error
Regards,
San! -
Error while activating the ODS
Dear Experts,
Please help me out,
I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
SID determination finished for InfoObject 0DOC_HD_TXT
I have also read out all the related post & also applied them in this but still the position is same.
also in RSKC, all the characters are allowed.
please suggest.
Thanks in advance
Neha
Process 000090 returned with errorsHi,
Pliz go thru below article for restricting Invalid chars.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
It might give u an idea or solve your issue.
Thanks,
Jitender. -
Error while activating the ods ( prod.issue)
Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
<b>Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.</b>
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
RakeshHi Rakesh
The error message
"Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
Please check your ODS settings, if 'Unique Data Records' is checked or not.
Sorry for my late response!
Regards
GSK -
Error in Activation of ODS Data
Dear All,
I am getting this error msg while activating ODS Data, It says its not able to execute one of this statements while activation
Program Name: GPBUJ6PU7X5TA8TLJSDOPVSU2Z7
The program terminates at this line
Types corresponding to Change-Log-structure
l_s_chgdata TYPE /BIC/B0000103000,
The DDIC does not have an table name by /BIC/B0000103000 which the program is trying to refer, Kindly do provide me your help and input on this.
Thanks.
Fayak.Hi Siggi,
Thnx for your reply, I did as suggested by you, activated the ODS and update rules again but it was not able to activate the data again I ran the RSRV as suggested by you i got an list of errors
Test for Activation Program
Active generated load program not available
Activation Program is not Current
Lines in temporary program: l_s_chgdata TYPE /BIC/B0000103000
Activation program has to be generated again
I ran the correct error but not to any avail, could you kindly guide me on this, I was previously loading data to this ODS successfully from a 300 client now I am trying to do this from an 400 client and I am facing this error.
Thanks,
Fayak. -
Error during activation of ODS data
Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful -
Error Wjile activating the ODS
Hi Gurus,
I am facing an error while activating the ods please find the message shown in the job log .
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000024 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000025 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000026 incorrect with status 9 in rsodsacstreq.
Please suggest how to activate the ods,
Regards,
VikramHi Vikram,
Check data in Data Package 24,25 and 26 there is error in some of the data. this u will find Details tab.
Delete the request from the ODS and
then EDIT the data in PSA and load the data in the ODS again.
then Activate it.
Then it wont fail.....prior to these find the records for which the activation is failing....so that u can edit in PSA.
Thanks,
Nagesh. -
Error when activating the master data
Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
AnnieHi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie -
While activating the ODS i'm getting these errrors
Hi All,
While activating the ODS i'm getting these errrors,
1) The creation of the Export Datasource failed
2) RFC Connection to the source system is damaged --- no metadata upload
3) Error when activating ODS object
What would be the reasons.............?
Plz Reply back me on [email protected]
Regards,
KiranHi,
Im finding a similar issue but with task SDE_ORA_GLJournals,
the code is :
AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
the parameters are also fine in the parameters file.
Has anyone found a solution or an explanation for this?
Thanks a lot, regards
Nestor -
SAP BIW 3.0B, Getting error in RSA1 " Error activating the ddic "
IN RSA1 after creation of info source to the master data,when assigning the data source and selecting the Tranasfer Method as "PSA", Iam getting the following error.
"Error activating the ddic" . The log has the following comments "Table /BIC/B0000104000 must be created in the database"
The error message displayed is
Activation of stgructure /BIC/B0000104000 in the dictionary failed
Message No: RSAR695
Please can some one help me in solving this problem.
Thanks&Regards,
Sudheer.sorry, you may be wrong in the forum as this is a BW/DDIC related question/problem.
suggestion:
you try se11 with the table name and try to create it.
if it does not help you: it is time to file a message in service.sap.com/message.
regards
Peter -
Error #1107 The ABC data is corrupt, attempt to read out of bounds.
Today i stumbled upon the "Error #1107 The ABC data is
corrupt, attempt to read out of bounds."
I googled the problem, but the only suggested workaroud (foud
in the bugbase - https://bugs.adobe.com/jira/browse/ASC-2289) was
not applicable to my case. The problem was reproduceable with Flex
3.2 and Flex 4 SDKs.
However, commenting out parts of my code, i found out that
the problem was causing my set of test data, which was
syntactically correct, but very very large (static const Array with
34611 objects to be precise). I deleted half of the test objects
and the error was gone.
Hope this helps somebody ...Nevermind I fixed it..
you just change the default program you open swf's with in windows.. -
I have a problem activating the ODS
Hi all,
I have a problem activating the ODS. When I try activate I getting the following dump:
"UNCAUGHT_EXCEPTION" "CX_SDB_ORA_PROGRAM_ERROR"
"CL_SDB_ORA_UPDATE_STATS=======CP" or "CL_SDB_ORA_UPDATE_STATS=======CM00I"
"UPDATE_STATS"
Any help would be appreciated.
Thanks.Assuming that you are using BI 7.0 Please check the support package you are using in the status. If you are below Sp 10 then you need to import support package 10
Please go thru sap note Note 975948 - No update statistics for newly created tables.
The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10.
Good Luck
Raj -
Data Laoded successfully, giving error while activating the ODS
Hi,
Process Chain is running daily for loading and activating the data into the ODS.
Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated.
I check it the Status tab, it is also giving the same Procedure to activate the data manually.
I checked in the Details Tab. It is displaying Errors as :
1. Error getting SID for ODS.
2. Task 0049 for parallel SID assignments terminated with errors.
3. Activation of data records from ODS terminated.
4. System error occured (RFC call)
Please any one help in this issue.
Thanks & Regards
Jagannadha RajuHi,
This is probably because you loaded transaction data before master data and tried activating it.Load the relevant master data, perform the change run and retrigger activation.
It should work.
Else there is a workaround. You can try editing out/blanking out those values in PSA and loading and activating. This will work.
Also try repairing the ODS object in RSRV.
When you activate multiple requests tick the activate serially check box.
thanks,
JituK -
DBIF_RSQL_INVALID_RSQL Error while activating the ODS Object
Hello BW Friends,
We have used the Extractor 2LIS_11_VAHDR and enhanced and coded the user exit to extract the data to the required field. Extractor is working fine and able to get the records but when we tried to schedule a data load in BW the request was shown green in the ODS and when saw it in monitor it is still yellow and zero in PSA and the processing hasn't completed. When i tried to activate it manually there is a short dump generated with this error, DBIF_RSQL_INVALID_RSQL. If any one of you has encountered same problem please let us know. Appreciate your prompt response on this.
Regards,
RajeshRaj,
I misunderstood your question.... check whether source system job is processing or not? what about any blocked TRFC'sin SM58.
try to find root cause... ODS activation is not a problem... load is not finished you tried to acivate the request still in the process Yellow.
try to check in Monitor details tab page messages...
All the best.
Regards,
Nagesh Ganisetti.
Message was edited by: Nagesh Ganisetti
Message was edited by: Nagesh Ganisetti -
Error in Data activation for ODS data load
We were succesfully loading data (delta load) so far for a CRM ODS. Suddenly, yesterday we are getting am error while trying to activate the data. - "No data packet numbers could be determined for request REQU_48C2T4S91I6GSJ4FNUE727M1Y- Message no. RSAODS119".
We could not even see the data in PSA.
Any clues why this would have happened? tRFC issue?
Thanks for your ideas/
Regards
RajHi,
What happens is data packets gets distributed across different Instances/Application Servers.
To distribute users equally on SAP Instances check SMLG Transaction and to distribute RFCs equally on SAP Instances check transaction RZ12
To assign specific BW Instance enter the instance in target system settings. In different source systems different fixed target instances can be assigned.
Check Transaction RSCUSTA2 for load balancing for activation of ODS Object data.
Hope it helps.
Mona
Maybe you are looking for
-
Immediately on attempt to launch, Crash Reporter pops up.
-
Need advice on video software.
Need advice on video software. I currently use adobe elements 3 and have done so for a few years now with no problems. my os is XP and my system is a couple of years old, but we do have a brand new win7 machine in the house. I am currently look at Cy
-
How do you get rid of 'empty' pre-roll time in logic pro 9?
how do you get rid of the pre-roll time in logic pro 9? My project's start time is 8-bars before any material, or tempos, or anything... Can't move the start time back to ")" (zero) STUCK!! at -8 The song now has 20 seconds of dead air time i
-
Possible iPhone Battery Leak?
Last night when I got home I plugged my iPhone into the charger cable and noticed that there was some resistance and the connector was a bit crooked. I looked inside the connector area on the phone and there was a yellowish deposit on one side of the
-
For customers who are set up as ERS, how do we change due dates in our system to reflect transit time (e.g. 5 days). Currently, shipments posted in our system by ship date so customers always look past due.