Error Activity type 502000 not set up for cost center 1000 cc111

hi all
While creating a work center (CR01) I need to enter a cost center and activity type for machine hours. However, while entering the activity type the following message appears:
Message no. CR 061
You are attempting to assign activity type XXXX to the work center. However, this activity type has not yet been set up in controlling area 1000 for cost center xxxxx.
while creating the activity type in KL01 i have already given * in cc category so it should go for all cc
What could cause this problem?
Thank you in advance,
Kind regards

Hi,
Check whether the activity type is maintained at the correct controlling area via KL03. If not, then create the activity type (KL01) in the corresponding controlling area.
Regards,
Darrel

Similar Messages

Activity Type ENGINE not set up for cost center

Hi all,
Currently, we have set up a work center in our system, which has the following intergration:
- Controlling Area --> TECH
- Cost Center --> TECH001
- Activity Type --> ENGINE
- Plant --> PN01
- Work Center --> PL01
Based on the above, the work center PL01 has the relationship of where Activity Type ENGINE and Cost Center TECH001 are linked together, where Cost Center is tied to Controlling Area TECH.
However, when a user tried to create General Task List (Trxn IA05), under Work Center PL01 and Plant PN01, and inserted Activity Type ENGINE in Operation item. It gives the following error:
Activity Type ENGINE not set up for cost center
I have also checked KP26 that everything is setup correctly.
Please can someone shed some light on the above?
Many thanks and regards,
Patrick
PS: Full point guaranteed for helpful answer.

Hi all,
I have solved the issue by changing the Start Date of the Work Center. Now everything works well.
cheers,
Patrick

Activity Type set up for cost center

Hi All ,
While creating a task list i m getting a message
Activity type is not set up for cost center in the year 2008
Message no. CR062
How could i set the activity type for cost center? Plz tell the procedure.
regards
sunil
Edited by: sunil gupta on Sep 19, 2008 10:12 AM

Dear Sunil,
Check out this,
1.Create a Cost center using T code - KS01.
2.Create an activity type using T code - KL01.
3.Assign the Rates for an activity type & cost center combination using T code KP26.
4.In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
Year as 2008,enter the cost center, activity type click on overview screen (F5)---> enter the per hour Rate
under Fixed price and set value as 2 for distribution key and plan price indicator as 3.
5.After performing this ,while creating the work center ,this combination of activity type & cost center
should be assigned.Then while creating routing/task list this work center can assigned for performing
operations.
Check with this & revert back if you need any further help.
Regards
Mangalraj.S

Fld selectn for mvmt type 561 / acct 900040 differs for Cost center (010)

hi all
while uploading raw material i find " Fld selectn for mvmt type 561 / acct 900040 differs for Cost center (010)" this error. please help me to solve this error.
thanks

Hi,
I do not have system now, but the above error happens due to wrong Field Selection of G/L & Movement type and not matching.
Option-1: Check Field status group in the create/bank/interest TAB for G/L in FS00 & check its assignments in OBC4 & Field Selection for status of cost center like optional/required/suppress
Use OMJJ t.code - 561 mvt - field selection and check additional account assignment (here cost center is optional/required/suppress.)
Option-2: Can also run the programme RM07CUFA through SE38 to update.
Regards,
Biju K

Fld selectn for mvmt type 261 / acct 404000 differs for Cost center (010)

Hi Guru's,
When trying to Post a stock from one valuation type to other valuation type in MB11 with reference to refurbishment order i am getting
"Fld selectn for mvmt type 261 / acct 404000 differs for Cost center (010)".
May I know the actual problem and please help on rectifying this.
-balaji

Hi,
Please Run the below Program through transaction code SE38
RM07CUFA
Provide Movement type 261
Company Code
GL code 404000
Find out the error message, there can be conflicts between movement type Filed status and GL field status group.
Please change the GL field status group.
Ravi polampalli

SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF

We are running SUM 1.0 SP10 on IBM i with V7R1 to put EHP6 and SP's on an ERP 6.0 system. Phase PREP_PRE_CHECK/SCANDIR_EPS0 repeatedly ends with multiple errors that SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF file. We tried increasing the sidADM and R3GROUP authority to the file, but it changes them back and ends with a different number of errors each time, see example:
SAPup> Starting subprocess with PID 4295601 in phase 'SCANDIR_EPS0' at 20140319101619
    ENV: DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/bin:.
    ENV: LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/server:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/jli:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64/jli:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LANG=en_US
    ENV: PASE_LC__FASTMSG=true
    ENV: PASE_LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LOCPATH=/usr/lib/nls/loc
    ENV: PASE_NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/lib/nls/msg/en_US/%N:/usr/lib/nls/msg/en_US/%N.cat
    ENV: PASE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: PASE_STDIO_ISATTY=N
    ENV: PASE_THREAD_ATTACH=Y
    ENV: PASE_TZ=<EST>5<EDT>,M3.2.0,M11.1.0
    ENV: PASE_USRGRP_LIMITED=
    ENV: PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: SAPSYSTEMNAME=Y60
    ENV: dbms_type=db4
    ENV: dbs_db4_schema=R3Y60DATA
    ENV: ILE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_LIBPATH=/usr/sap/Y60/SUM/abap/bin
EXECUTING /usr/sap/Y60/SUM/abap/bin/SAPCAR -flat -R /usr/sap/transD60/EPS/in -xvf /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR
SAPCAR: processing archive /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR (version 2.01)
x CSR0120031469_0080800.PAT
x SIGNATURE.SMF
SAPCAR: can not set permissions for /usr/sap/transD60/EPS/in/SIGNATURE.SMF (error 13). No such file or directory
SAPup> Process with PID 4295601 terminated with status 13 at 20140319101623!
Has anyone lse exprienced this and can share a fix?
Thank you,
-Margie

Hi,
We had the same issue, and in my opinion it is caused by the parallelisation of sapcar during SUM phase PREP_PRE_CHECK/SCANDIR_EPS0
I did see several parallel SAPCAR jobs running during this phase.
So what happens when one job extracts SIGNATURE.SMF at the same time another job tries to finalize its extraction by setting the permissions for /usr/sap/trans/EPS/in/SIGNATURE.SMF?
It can happen that permissions are being set at the same time another sapcar yust deletes this file to begin extracting.
Since we had 146 SAR archives that needed to be extracted, a retry allways ended up in 4 to 12 conflicts.
What did do the trick was adding
/sapcar/extrcact_parallel = 0
to the file
../SUM/abap/bin/SAPup.par
Just as Christoph Langer suggested.
We had to restart the whole phase, a repeat was not enough to solve the problem.

Only one internal order allowed for Cost center/GL combination -validation

Dear Friends,
We are using internal orders for controlling department wise budgets.
my client wants that he be able to post only through one GL account to one internal order
that is for Marketing dept,(departments are created as cost centers)
Canteen exp              internal order 1000
Entertainment exp     internal order 1001
Gift exp                     Internal order 1002
that is when GL account canteen exp is used (for cost center 1000 (marketing)) then internal order 1000 can be used but if entertainment exp is to be booked internal order 1000 cannot be used. in this case only internal order 1001 should be allowed
We are using real internal order (settlement will happen at end of month)
Can you let me know if this is possible in standard SAP or any workaround.
Regards,

Hi Sangharsh,
If internal order must be filled in these GL then you can meet your requirement by creating the validation. To meet this requirement three steps are to be created in one validation. One step is created below to make you create two more steps by your self.
Create validation under Financial Accounting Line Item using transaction GGB0.
Step 1.
Prerequisites. (Go to settings>Expert mode and fill following)
BSEG-BUKRS = '1000' AND (here instead of 1000 you enter your company code)
BSEG-HKONT = '450000'      (here instead of 450000 you enter GL for canteen expense)
Check
BSEG-AUFNR = '1000'
Message
Click on pencil icon and create below message or the message you want.
Intenal Order 1000 is allowed for canteen expenses.
Assign this validation to your company code using transaction OB28 with call up point 2.
Similarly you can create two more steps. Thus your requirement can be met.
Regards,
Chintan Joshi.

"Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

hi,
i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode". When i press the buttom "start recording" i recieve the error message >6 117 Mass activity type does not exist.
Does somebody know what can i do?
thnaks

On the right click on HD under video quality to filter it.

Actual activity price does not exist for cost center / activity type

Hi,
We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
We have used a customized program and have loaded the data from se38.
All this HR data will be saved in CAT2
Later we transfer the time related data into SAP FI/CO using CAT7.
+When tested with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
We have run the price calculation forr the FY 2010.
Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
When uploaded employee time sheets before, all the cost were getting claculated and were entering into the respective cost elements, but now no amounts are being calculated and it is taking Zero.
When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
PLease assit
Regards,
shilpa

Hi
I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
Regards
Ajay M

Activity type E not allowed for equipment entered

Dear Sir , We are using ETM . Following error is coming while creating performace based document .
Activity type E not allowed for equipment entered
Regards
Anil

Give 1 for both type and give it a try.
for target=actual which is type 5 pls check the link below
http://help.sap.com/saphelp_46c/helpdata/EN/66/bc6faa43c211d182b30000e829fbfe/content.htm

Error: property is not set correctly for User Defined Fields.

Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
sat

Hi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat

Error 1046: Type was not found or was not a compile-time constant: Component Event.

Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
   //Set up UI
   textArea = new TextArea();
   textArea.setSize(500,280);
   textArea.move(20,54);
   addChild(textArea);
   textInput = new TextInput();
   textInput.setSize(500,24);
   textInput.move(20,340);
   textInput.addEventListener(ComponentEvent.ENTER,checkKey);
   addChild(textInput);
   button = new Button();
   button.width=50;
   button.label="Send";
   button.move(20,370);
   button.addEventListener(MouseEvent.CLICK, sendMsg);
   addChild(button);
   chatName = new TextInput;
   chatName.setSize (100,24);
   chatName.move (80,370);
   chatName.text="<Enter Name>";
   chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
   addChild(chatName);
   //Connect
   rtmpNow="rtmp:/VideoChat ";
   nc=new NetConnection;
   nc.connect (rtmpNow);
   nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
   cam = Camera.getCamera();
   mic=Microphone.getMicrophone();
   //Camera Settings
   cam.setKeyFrameInterval(15);
   cam.setMode (240, 180, 15, false);
   cam.setMotionLevel(35,3000);
   cam.setQuality(40000 / 8,0);
   //Microphone Settings
   mic.gain = 85;
   mic.rate=11;
   mic.setSilenceLevel (25,1000);
   mic.setUseEchoSuppression (true);
   //Video Setup
   vid=new Video(cam.width, cam.height);
   addChild (vid);
   vid.x=10, vid.y=20;
   //Attach local video and camera
   vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
   good=e.info.code == "NetConnection.Connect.Success";
   if(good)
    //Set up shared object
    text_so=SharedObject.getRemote("test", nc.uri, false);
    text_so.connect (nc);
    text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
   for (var chung:uint; change<e.changeList.length; chng++)
    switch(e.chageList[chng].code)
     case "clear":
      break;
     case "success":
      break;
     case "change":
      textArea.appendText (text_so.data.msg + "\n");
      break;
private function cleanName(e:FocusEvent): void
   chatName.text="";
private function sendMsg(e:MouseEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
private function checkKey (e:ComponentEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
   msg=e.info.code == "NetConnection.Connect.Success";
   if(msg)
    nsOut=new NetStream(nc);
    nsIn=new NetStream(nc);
    //NetStream
    nsOut.attachAudio(mic);
    nsOut.attachCamera(cam);
    nsOut.publish("camstream");
    nsIn.play("camstream");

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

IDoc type could not be determined for the IDoc in F110

Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
Regards

If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

Error: "Transaction type could not be determined" during PO Creation fromSC

Hi all,
I'm working on SRM 5.5 with ECS.
During the creation of a PO I want to add a SC as an item of PO.
But when I chose the SC and click on the button Add to PO I recive the error:
Transaction type could not be determined
In the organizational unit I set the attribute BSA and DP_PROCT_TY.
there are other steps I have to do to join the transaction type of SC and PO?
rgs
enzo

Hi Enzo,
First check if the attribute BSA and DP_PROC_TY have the same value.
Then in the attribute value for BSA, change the source system for the document type to your SRM system.
Create a new PO and a shopping cart.
Try changing the PO by adding the shopping cart
Hopefully your problem may get resolved.
Thanks
Sanjeev

Yeild and Activity Types are not coming on confirmation

Dear Sir's
Hope everyone fine by the grace of GOD.
Friends i am facing a problem while doing Confirmation of production order in T.Code Co11n .Yeild(net production) is not picking from the Production order and also Activity types are not coming while doing confirmation.
please help me out in this problem
Best Regards,
HAFIZ ABDUL HASEEB KHAN
SC.PP Consultant

Dear
There are 3 possibilities to populate the activity and yeild field:
1) The system can propose them based on quantity, using the standard
formula, directly after entry of the operation being confirmed please check it in your order first
2) The system can propose them at the time of saving
3) They can be manually entered ~ however using this option, formula
will not recalculate using the settings from the Standard value key,
set for the work centre.
To set one of the above as default in customising, follow these steps:
- Call transaction OPK0
- Select the default Confirmation Profile SAP001 is being ticked marked. - Default Values , Qty and Service in OPK0
- Select the Default tab and set the default for Quants and Services
to 'Immediate Proposal' or 'Propose When Saving'
These options allow you to choose whether the activity and yeild proposal in
C011N is given immediately after entry of the operation to be
confirmed or upon saving the confirmation. However note that if
you subsequently override these proposals by maually entering activity
details, the formulae will not be recalculated and manually entered
data will take presidence.
Hope this is clear
Regards
JH

Error Activity type 502000 not set up for cost center 1000 cc111

Similar Messages

Maybe you are looking for