Error add a new appset

Hello everyone,
I am working with BPC 7.5 MS SP 04.
When i try to make a copy of the appset, i have an error in the step "copy olap database".
Any ideas?
Thank you very much
Simone

Can you check your TblLogs table in the AppServer database to see what messages are getting recorded?
Try this query in SQL Server Management Studio:
USE AppServer
SELECT TOP 1000 * FROM TBLLOGS
ORDER BY LOGID DESC
Thanks,
John

Similar Messages

  • I have another issue. Everytime I add a new mailbox , I get an error message in owa 2010 that it cannot access the mailbox

    I go into the 2008 r2 dc and add a user. The 2003 dc has all of the fsmo roles. Then I go into the exchange server and add the new mailbox through the GUI. It runs the cmdlet and creates the new mailbox without any errors. Then I go in and try to access
    the mailbox through owa and cannot access the mailbox. It says the mailbox does not exist. Both my 2003 dc(which I want to decommission) and 2008 servers are replicating. I see the user object on both servers. I have the email server pointed to the 2003 dns
    server as my preferred dns. This just started happenning a couple of days ago. I dont know if a windows update caused this but everything was fine before Wednesday. All of the other users can access their mailboxes through owa just any new ones I created cannot.
    In fact when I send a test email to the new account, I immediately get a bounce back so I dont think I would be able to access the new mailbox through outlook.
    visualbasicfrustrated

    Hello,
    I recommend you check your exchange server using windows server 2003 DC or windows server 2008 DC.
    Please use repadmin /showrepl command to check DC replication status.
    Please check if there is related error in application log.
    Cara Chen
    TechNet Community Support

  • Error while trying to add a new field in search criteria by VO extension

    Hi,
    I am trying to add a new field by using the VO extension to a seeded OAF page used to search Repository contracts.
    I get the following error on opening the page after I have compiled my code on server and bounced apache.
    Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME =SSPN_AdvancedSearchAttributesPVO; APPLICATION_MODULE = oracle.apps.okc.repository.search.server.ContractsAdvSearchAM;
    I extended the AM also after this to include the extended VO but still the error comes.
    This page is a dynamic search page where the results change based on the different search criteria.
    Cheers
    Swati

    Hi,
    I extended the AM also after this to include the extended VO but still the error comes.There is no need to extend the AM for extending a VO. Hopefully the VO which u extending already attached to the AM oracle.apps.okc.repository.search.server.ContractsAdvSearchAM.
    Regards,
    Gyan

  • Add a new column to an "Insert Form" created by HTMLDB Wizard throws Error

    Hi,
    My table design has changed and I had to add 2 new columns.
    The corresponding Insert Form/Report/Update Forms created by the HTMLDB should now reflect the new columns that have been added.
    In report and update forms I did not have a problem but in the Insert form, under Edit Page Process I tried to change the sql and I get the below error
    "Encountered the symbol "end-of-file" when expecting one of the following: begin case declare end exception exit for goto if loop mod null pragma raise return select update while with "
    My Edit Page Process SQL is as below-(Last two columns are the NEW columns i.e CDPL and CDPLCA)
    insert into "L2ENTRIES"
    ("AUTONUML2E",
    "ROLLNO",
    "AWARDCODE",
    "ROLLCLASSCODE",
    "SURNAME",
    "FORENAME",
    "SEX",
    "DOB",
    "PPSNO",
    "M1",
    "M2",
    "M3",
    "M4",
    "M5",
    "M6",
    "M7",
    "M8",
    "M9",
    "M10",
    "M11",
    "M12",
    "M13",
    "M14",
    "M15",
    "M16",
    "FEES",
    "CNULLS",
    "CDUPPPS",
    "CROLL",
    "CAWARDS",
    "CMODULES",
    "CHECKCHAR",
    "CHECKNO",
    "VALIDPPS",
    "VALIDPPSUK",
    "PPSNOPAD",
    "CDPL",
    "CDPLCA")
    values (
    :P3_AUTONUML2E,
    :P3_ROLLNO,
    :P3_AWARDCODE,
    :P3_ROLLCLASSCODE,
    :P3_SURNAME,
    :P3_FORENAME,
    :P3_SEX,
    :P3_DOB,
    :P3_PPSNO,
    :P3_M1,
    :P3_M2,
    :P3_M3,
    :P3_M4,
    :P3_M5,
    :P3_M6,
    :P3_M7,
    :P3_M8,
    :P3_M9,
    :P3_M10,
    :P3_M11,
    :P3_M12,
    :P3_M13,
    :P3_M14,
    :P3_M15,
    :P3_M16,
    :P3_FEES,
    :P3_CNULLS,
    :P3_CDUPPPS,
    :P3_CROLL,
    :P3_CAWARDS,
    :P3_CMODULES,
    :P3_CHECKCHAR,
    :P3_CHECKNO,
    :P3_VALIDPPS,
    :P3_VALIDPPSUK,
    :P3_PPSNOPAD,
    :P3_CDPL,
    :P3_CDPLCA)
    It will be great if some one can assist me in this matter.
    Thanks.

    Resolved this by a simple ";" at the end of the insert sql.
    I did not think a ";" will be necessary because when you edit the page process a ";" is not visible.

  • Trying to add a new user, but gives unknown error

    Hi Guys,
    When I go to site actions >> site setting >> site permissions >> and try to add a new user, it gives me "unknown error". Any ideas why this is happening? This is happening only on some of the sites. Thank you.

    check uls logs and event viewer
    try these links:
    http://www.go4sharepoint.com/Forum/get-unknown-error-adding-users-10654.aspx
    http://roxority.com/sharepoint-zen/sharepoint-unknown-error-how-to-show-all-the-details.html
    https://social.msdn.microsoft.com/Forums/office/en-US/69806e64-fc2c-4d74-8ec3-98f5d5e5f5ff/cannot-add-user-to-sharepoint-group-unknown-error?forum=sharepointdevelopmentlegacy
    https://support.microsoft.com/kb/926961?wa=wsignin1.0
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • Instruments in Logic Pro 9 Library will not load: I try to add a new instrument on a project and get a "cannot be found" error.

    Ladies and Gentlemen,
    As a faculty member in the School of Music, I have just acquired a copy of Logic Pro 9.1.8 through my University. The programs and instrument packs were installed by our IT department and show as being fully installed on Logic Pro when I search for additional content through the Logic Pro tab at the top of the screen. The window shows that all 6 Jam Packs, Logic Pro & Main Stage Content (Essential and Additional) GarageBand content, and Surround content is installed. However when I try and add a new instrument on a project, most of these instruments cannot be found. I get the following error:
    Audio file “KB_pizz_f_C1.wav” not found!
    I then press the Continue Tab, and it looks for the instruments in an empty file that Logic creates in the Music section of the hard drive. I have investigated the sounds by going through the MAC Hard Drive>Library>Application Support>Logic>Sampler Instruments folder, and tried to copy the sounds into the Music>Logic folder created by the program. That does not work either. Even attempting to go into these Logic Pro instrument files one at a time has proved fruitless. I am told that the file cannot be opened.
    The files appear to be installed, but cannot be accessed or opened. They all have that translucent grey appearance when I attempt to click on the icon. This is true for about 80% of the files in the instrumental library. Whenever I create an instrument, the EVP88 Electric Piano is installed by default. There are a few instruments that I can successfully replace this default instrument with, but a majority of the instrumental library remains unavailable. Can anyone help?

    Kurt:
    You might try a different way of adding the video files to the web page. This demo page has one where the file does not load until the play button is selected: Opening Item in a New, Precisely Sized Window. This demo page has 9 short videos on it using that method: PhotoPresenter Animated Slideshow Themes. Just add a screenshot of one of the movie frames or any photo you want and add the Play button on or below it.
    You manually upload the movie file to your server so iWeb is not involved in the uploading the file at any time.
    Similarly this demo page, QT movies via iFrame, has a method that has you manually uploading the file to the server and linking to it via iFrame code. That page also has other similar methods.
    Another method is demonstrated in Roddy's iWeb for Musicians site on his Video page. Here you also upload manually.
    OT

  • Get an error when trying to add a new object!

    Post Author: zhaodifan
    CA Forum: Administration
    I was trying to add a new object from central management console and I got the following error:
    Retrieve Error
    There was an error while retrieving data from the server: Failed to read data from report file C:\WINNT\Temp\pres_report.rpt. Reason: Operation not yet implemented. File C:\WINNT\TEMP\tmpreport\~ci226c521bf2923e0.rpt.
    The report I am trying to add was running on a Linux box with the same version BusinessObjects Cyrstal 11 running. I want to move it to a Windows box... The report itself shouldn't have problems because it was running fine on the linux box...
    Also want you let you know that I don't know too much about Crystal Report and our Crystal Report admin quited his job last week! I will be very appreciated if anybody can give me any advice. Thank you!
    Difan

    If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.

  • Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • CSM 4.1 Authorization error when trying to add a new device

                       Hi, i just finished installing a new CSM 4.1 and i set it up to use the local windows user accounts for its administration. So when i login to the CSM i use the same username/password as the one used to login to the underlying Windows OS.
                        When i am trying to add a new device in CSM i get an error saying that i do not have enough rights to do that. Any ideea why this happens?
    Thanks,
         Costin

    You seem a little grumpy. Yes, it has acurred to me that no one knows the solution. And no, I have not called tech support yet as I have been distracted lately and spending an hour on the phone trouble shooting is an hour I could be studying. Its much easier to "bump" this thread and hope someone with a suggest will chime in.
    Anyway, please dont just tell me to delete something without giving me an idea of what Im deleting. I have a feeling that this login.keychain deletion will cause me to loose the information already stored. Is this the truth?

  • I'm trying to add a new domain and I'm getting error message.

    Hi,
    I'm trying to add my new domain name and I'm getting error message that says: 'Cannot add domain because this domain already exists. Please delete the domain and I already deleted it along with all the 'A Records', 'CNAME Records (Alias)', MX Records',  and 'Advanced DNS Records'. I have a ton of new fans coming to the site tonight. Help!!!

    Did you ever setup another trial BC site before and attach that domain name?  I'm pretty sure that if the domain name is attached to BC's nameservers already even if it's under another account then it won't work.  Not 100% sure about it but it's a likely culprit.  Try to type the subdomain you are adding into a browser and add "/admin" and see if you can login to BC-- if it's an old site you had setup then you should remove the subdomain from that account first and then try to add it to your newer BC site.

  • Feedbag Error 5 when trying to add a new buddy/person

    This is a simple problem.
    Using my AIM account I can add a new AIM Buddy to my Buddy List and chat, video or audio with no problem.
    However, if I switch to my normally active .Mac account I get an error "Feedbag error 5" that prevents me adding the AIM to my Buddy list.
    So. it works with AIM account but not .Mac. What am I doing wrong, if anything?

    This person is not in my address book. I have entered their AIM screen name correctly and, yes, selected AIM as the account type. I've even entered them in my address book and have the same issue.
    If I log in using MY AIM account 'terrabytejunky' then I can add them to my 'terrabytejunky' Buddy list and chat. Everything is fine.
    But if I log in using my .mac account where I have all my other Buddies listed, then if I try and add their AIM screen name I get the error "Feedbag Error 5"

  • Adding a new Appset. Error.

    Hi,
    I am trying to copy an AppSet based on AppShell but when the process goes to the "Copy database" step I have the following error message:
    The tail of the log for the database "IMQ_PTO"
    has not been backed up. Use BACKUP LOG WITH NORECOVERY
    to backup the log if it contains work you do not want to lose.
    Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement
    to just overwrite the contents of the log.
    RESTORE DATABASE is terminating abnormally
    Do you know what to do in such a case? Is there any thread regarding this error? I've been searching but I still haven't found it.
    Thank you for your help.
    Regards,
    Gorka

    Hi Gorka
    This is a strange error, but it appears to be failing when trying to restore the database. Maybe try the following
    Change the recovery mode of the database from FULL to SIMPLE.
    Backup the database using SQL Server Management Studio
    Re-Try adding a new appset
    I Hope this helps
    Kind Regards
    Daniel

  • Trying to automatically add a new row w/o mutating table error...

    I'm using Oracle 10g express. I'm trying to automatically add a new row with the same e_ID, (RDD + 6 months) as the updated row when RC is updated. I'm fairly new to Oracle, so I need some help on creating a trigger. If you need more details let me know. Thanks in advance.
    create table E
    e_id number(6,0) not null,
    constraint e_pk primary key(e_id)
    create Table ER
    e_Id Number(6,0) Not Null,
    SC Date,
    RDD Date,
    RC Date,
    Constraint ER_Fk Foreign Key(E_Id) References E(E_Id)
    );

    mookjais wrote:
    I'm using Oracle 10g express. I'm trying to automatically add a new row with the same e_ID, (RDD + 6 months) as the updated row when RC is updated. I'm fairly new to Oracle, so I need some help on creating a trigger. If you need more details let me know. Thanks in advance.
    create table E
    e_id number(6,0) not null,
    constraint e_pk primary key(e_id)
    create Table ER
    e_Id Number(6,0) Not Null,
    SC Date,
    RDD Date,
    RC Date,
    Constraint ER_Fk Foreign Key(E_Id) References E(E_Id)
    );Do you mean following(example)?
    create trigger after_insert_e
    after
      insert
    on  e /*This is table name*/
    referencing new as new old as old
    for each row
    begin
    insert into  ER(e_Id,SC,rdd,rc)
    values(:new.ed_id,sysdate,sysdate,sysdate);
    end;

  • How to add a new dimension in ASO cube without losing all data

    Hi,
    I have an ASO cube with 18 dimensions and I want to add a new one (regular). When I add this new dimension it asked me that the all data has to cleared before the restructure can take place. If I click yes then I would lose all data regardless of the fact if I have a level0 export or not. Because when I tried to reload the export back into the cube it gave me an error cause all the dimensions were not present in the export. Does anyone know how would I be able to accomplish this task?
    Thanks
    fikes

    You can try this work around solution.
    1) Export Lev0 data
    2) Clear the cube
    3) Add new dimension Regular.
    4) Add a default member Reg00 in the new dimension and save.
    5) Open the Lev0 data in a text editor, Insert "Reg00" in the begining of the file and Enter.
    6) Lev0 file will have first record "Reg00" and the remaining export file will be from the second record.
    7) Load the modified file with out rule file.
    You can verify that all your history data will be loaded w.r.to the Reg00 of the New dimension Regular.

  • How to add a new Element to the Context

    Hello all.
    I created in the wdInit()
    ArrayList datas = new ArrayList();
         for (int i = 0; i < 25; i++) {
              MyData data = new MyData();
              data.setMethods();
              datas.add(data);
         wdContext.nodeMyData().bind(datas);
    Now, I want by clicking on the Button "Create new Element", forward user to the other View, which elements are connected with the same model -> context, the new element should be added to context, the user should fill the form and click Save-Button.
    How can I add a new Element to the Collection I created and choose it as a current element?
    If I do: wdContext.nodeMyData().bind(new MyData()) all information will be lost. And I will have only one field.
    If I do it like this:
    IWDNodeElement dynTabElem=(IWDNodeElement)wdContext.nodeMyData().createElement();
    wdContext.nodeMyData().addElement(dynTabElem);
    I get an error: com.sap.tc.webdynpro.progmodel.context.ContextException: NodeInfo(DataComp.MyData): value node is created without a reference
    Well I can pass to my new View a Collection as a parameter and then
    Collection.add(new MyData()) and then bind it. But I find this solution not good.
    Is there any possibility to get the existing Collection from the Context without passing it to the view?
    Can I just add a new element to the existing collection?
    Thanks in advance.

    Hallo Monalisa,
    I did as you said. But I can't add something to my model class, because it is not collection.
                            MyData data = wdContext.currentBelegElement().modelObject();
                   data.add() ???? - don't work
                   wdContext.nodeMyData().invalidate();

Maybe you are looking for