Error Add-On upgrade 2005 SP01

Hi
I have an error when I try tu upgrade add-ons
2005 A SP00 PL --> 2005 A SP01 PL04
XL Reporter or Screen Painter
B1 Say that The installation failed because another version is already exist and ensur that the version number is higher than the version previously installed
I have uninstall XL Reporter but it's the same
Thanks

Hi,
Try going to the SAP Business One directory, locate the AddOnsLocalRegistration.sbo and AddOnsInstall.sbo files and open them with the notepad. Delete the information regarding this two addons, and execute SBO again.
But first of all, make a backup copy of the files.
Hope helps,
Ibai Peñ

Similar Messages

  • 2005 A Add-on upgrade to Sp01 u0096 Disconnects when using VCR buttons

    I have a strange issue after I upgraded my add-on to 2005 SP01. 
    The add-on seem to work fine except when the VCR buttons are used I get a system message  “Add-on XXXX is disconnected.” 
    I’m not doing anything with the VCR buttons. 
    And the Add-on continues to run in the background, although SAP isn’t connected to it any more. 
    And I don’t get this error when I’m debugging it. 
    This only happens after I’ve installed it as an add-on.

    Hi John,
    Thanks for your assistance.  i followed the steps and now its working.
    Regards,
    Jennifer

  • FYI -  New Compatibility with Add-Ons Document for 2005 SP01

    A new <b>SAP Business One and SDK Compatibility with Add-Ons</b> for Release 2005 SP01 has been published on the SAP Business One area: . <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/businessone">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/businessone</a>
    Regards,
    Yisrael Ben-Bassat

    Hello Yisrael,
    Sorry but I couldn't find any link except the link to the release note published by u. Did u mean this or is there an upgrade file for SP01?
    Thanks,
    AS

  • Sales analysis zero after upgrade from SBO 6.5 to 2005 SP01

    Hi,
    I have upgraded the DB directly from 6.50.099 SP:01 EF:27 to 2005 SP01 ( 6.80.318 SP:01 PL:18)
    I have a clean install of SBO since it is running on another server now.
    The only problem I got is that the sales analysis shows zero amounts in the total A/R invoices row for all invoices prior to the upgrade.
    The invoices itself have the correct values.
    Any clue how to fix this problem?

    I just ran the Update Control Report and it shows that
    table CRD1 now has more records 94 before 184 after
    And there are 7 entries in the System Messages table saying
    [Microsoft] [ODBC SQL Server Driver][SQL Server] Invalid column name 'prjcode'.

  • Add-On ST error in Prepare Upgrade from 46D to ECC 6.0

    I have getting Error Add-On ST 2D, and undecided, I don't know what to do, I had installed Solution Manager for 46D and ST 2D, If anybody has this situation, how do I download the Add on
    I will appreciate any help on this matter.
    Thanks
    Jagraj Dhillon

    > Dear,
    >
    > I believe you have the addon component 'SAPKITL02D
    > "SAP Solution Manager - Installation 4.6C (02D) "
    > installed in 4.6C , is that right?
    >
    > Since the ST (Solution Manager) cannot be upgraded
    > from current version
    > to the latest using the R3 upgrade, You need to
    > Deinstall the addon. (with import of SAPKITL029 in
    > SAINT) Please reset prepare as described in the
    > upgrade manual (SAPup reset prepare + empty DIR_PUT)
    > and next import the request SAPKITL029 using SAINT
    > which should take care of the de-installation of ST
    > 02D.
    >
    > I hope this helps.
    >
    > Lucio Rodrigues
    > SAP AGS
    Hello, Lucio.  I am in the same boat, only with R/3 version 4.6C, and ST 0.2C (SAPKITL02Y).  Would the SAPKITL029 work for me as well, or is there another SAINT package designed to remove ST 0.2C?
    SAP support has not been very helpful to this point.  If you have an import which would help with uninstalling the addon, please email it to [email protected], or please let me know where to download it if it is available for download.
    Mike McCrory - BMW Global Data Center America's
    Message was edited by:
            McCrory Michael

  • B1 ADD-ON - BC SETS 2005 SP01

    Hello,
    Do you know how this addon it is used for? Countries?
    B1 ADD-ON - BC SETS 2005 SP01
    Thank you!

    Hi,
    Business Configuration Sets (BC Sets) for SAP Business One
    SAP Business One Add-On BC Sets. BC Sets is an implementation tool set for an optimized Customizing process.
    You could find more in this link:
    https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000654575&_SCENARIO=01100035870000000183&_ADDINC=&_OBJECT=011000358700002906862005E
    Rgds,

  • DI Server license problem after upgrading to SP01 PL4

    Hi.
    After I've upgraded to SP01 PL4 my Web Services that use the DI Server API do not work anymore. The SBO Client is working correctly and the DI Server and License Manager are running, too.
    When I try to login with License Server DEVELOPERCOMP (my computer), I'm getting the Message  'Connection with License Server failed'.
    Then I've read that you have to add the port number of the license server. So, I entered DEVELOPERCOMP:30000, but I'm getting the error 'License does not exist'. I'm using the manager account and it has the licenses Professional User, SAP AddOns and SDK Tools.
    I've also turned the firewall off, but it this doesn't work.
    It is really urgent, because one of our customers upgraded to SP01 and want to use our web services again.

    Ok, everything works fine except one thing: I cannot get all keys of orders of one vendor. my code looks like this:
                Dim DISNode As New SBODI_Server.Node
                Dim sSOAPans, sCmd As String
                sCmd = "<?xml version=""1.0"" encoding=""UTF-16""?>"
                sCmd += "<env:Envelope xmlns:env=""http://schemas.xmlsoap.org/soap/envelope/"">"
                sCmd += "<env:Header><SessionID>" & SessionID & "</SessionID></env:Header>"
                sCmd += "<env:Body><dis:GetObjectKeyBySingleValue xmlns:dis=""http://www.sap.com/SBO/DIS"">"
                sCmd += "<ObjNum>oPurchaseOrders</ObjNum>"
                'if suppliername is "", return all open orders
                If SupplierName.Trim = String.Empty Then
                    sCmd += "<PropName>DocEntry</PropName>"
                    sCmd += "<Value>" & String.Empty & "</Value>"
                    sCmd += "<Condition>bqc_NotEqual</Condition>"
                Else
                    sCmd += "<PropName>CardName</PropName>"
                    sCmd += "<Value>" & XmlProcessing.getStringXmlEncoded(SupplierName) & "</Value>"
                    sCmd += "<Condition>bqc_Equal</Condition>"
                End If
                sCmd += "</dis:GetObjectKeyBySingleValue></env:Body></env:Envelope>"
                sSOAPans = DISNode.Interact(sCmd)
    If I enter no vendor name, so that I get the keys for all orders, it works. But If I enter a vendor name, I'm getting an empty response.
    The funny thing is that all other requests I'm doing are working. I can get a list of all vendors, I can search for an item by its item code, I can add an unscheduled receipt and so on. Before I upgraded to SP01 it has worked fine for several weeks.
    Does someone has a clue?

  • Error message when upgrading to 7.3.2.6

    I just (attempted to) upgrade to 7.3.2.6 (and after the install, it all seems OK for now) - but during the install, I got a "files in use" error message window, mentioning that Windows Explorer was running (Process Id: 432), giving me the option to Retry, Ignore or Exit.
    I tried all options - I even Exited and rebooted - and re-upgraded after that, but keep getting the same error... So far iTunes seems to have upgraded and appears to be working - but could the install have missed some components now - and therefore should I expect trouble ahead?

    Yes, i had the same error message after upgrading to 7.3.
    I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
    Search this forum - i hope you find a solution.

  • Error message after upgrading to 7.3

    i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?

    Yes, i had the same error message after upgrading to 7.3.
    I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
    Search this forum - i hope you find a solution.

  • SBO 2005 SP01 - New installation package

    Hi.
    I'm testing MS SQL 2005.
    I need the complete installation package for SBO 2005 SP01. I cannot find it on the partner portal. I'm only able to find the upgrade packages PL01 an PL03.
    Anyone got the complete package ?
    Regards,
    Jostein Kastet

    Hi Jostein,
    The SBO 2005 SP01 is only an upgrade of the 2005 version.
    Please upgrade to the last 2005 patch, then upgrade to SP01 PL01 and after that apply the patch PL03.
    Hope it helps
    Trinidad.

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail.  Any suggestions?

    The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

  • Error:"Add on  executable file not found"

    hi
    How to solve
    "Error:"Add on  executable file not found"" while adding add ons in sap b1
    Edited by: Philip Eller on Jun 16, 2008 10:13 AM
    Edited by: Philip Eller on Jun 30, 2008 10:02 AM*

    Hello Neetu,
    Are you installing the XLR? if yes, when choose SQL server, please
    Type a wrong servername first, then you will be able to get to an advanced
    dialogue. Enter the correct name with username and password and then go on
    to see if it works.
    Kind Regards,
    Maggie Zheng
    SAP Business One Forum Team

  • Error in the Upgrade Assistant for 11g

    Hi,
    I'm trying to upgrade a 10g repository to 11g using the Upgrade Assistant but it is returning an (unhelpful) error in the log file.
    Has anyone else experienced this error or know what it is?
    [2010-09-17T14:14:45.902+01:00] [Framework] [NOTIFICATION] [upgrade.Framework] Starting to upgrade BIEE.
    [2010-09-17T14:14:45.933+01:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] upgrade exception occurred
    [2010-09-17T14:14:45.933+01:00] [Framework] [ERROR] [upgrade.Framework] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
    [2010-09-17T14:14:45.933+01:00] [Framework] [ERROR] [upgrade.Framework] UPGCMP-02712: Expected oracle.biee.admin:oracleInstance=*,type=BIDomain.OracleInstance,group=Service Oracle instance, found 2
    [2010-09-17T14:14:45.933+01:00] [Framework] [ERROR] [upgrade.Framework] UPGCMP-02712: Expected oracle.biee.admin:oracleInstance=*,type=BIDomain.OracleInstance,group=Service Oracle instance, found 2
    [2010-09-17T14:14:45.933+01:00] [Framework] [NOTIFICATION] [upgrade.Framework] Finished upgrading BIEE with status: Failure.
    Thanks.

    I ran into this same problem after I performed the steps in the enterprise deployment guide. One of the steps in Chapter 5, section 5.4.4 has you separate the bi_server1 managed server from the admin server into its own "mserver" directory structure by using the pack.sh and unpack.sh commands. This step appears to cause the problem. For now, what I have done is perform a complete reinstall and skip this step along with any other clustering related steps. Once I did this, I was able to run the upgrade assistant to upgrade the 10g repository to 11g.
    I have informed Oracle support about this issue. If they have a better work around, I will post it back here at a later date.
    Edited by: user10715047 on Dec 21, 2010 1:33 PM

  • Encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3

    I encountered error 6  when upgrading Iphone 5s from 7.1.2 to 8.3
    I've tried upgrade iphone on three computers , the results are all the same.
    One of the computers successfully upgrade my ipad to 8.3.
    There are 2GB left on IPhone 5S before I perform the upgrade.
    It should be enough for iTunes to finish the process, right?
    But in the log, it says  "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
    why is that?
    Any way for me to continue the upgrade?  it seems it's almost done.
    Thank you
    the end of the log  is as below:
    [10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
    [10:36:29.0714] entering fixup_var
    [10:36:29.0714] entering update_var_directory_hierarchy
    [10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
    [10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
    [10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
    [10:36:29.0714] unable to copy directory: 2
    [10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
    [10:36:29.0714]
    [10:36:29.0714] ==== end of device restore output ====
    [10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
    [10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
    [10:36:30.0542] Restore completed, status:6
    [10:36:30.0542] Failure Description:
    [10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
    [10:36:30.0542]    Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
    [10:36:30.0542]       Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）

    Hello there, Kenduck.
    It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
    Get help with iOS update and restore errors - Apple Support
    Particularly:
    Check your security software
    Errors: 2, 4, 6, 9, 1611, 9006.
    Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    If you still see the error message, check for USB connection issues.
    Thanks for reaching out to Apple Support Communities.
    Kind Regards,
    Pedro.

  • Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.

    I am having some trouble trying to get IOS 3.1 on my first generation Ipod touch.  I have the latest Itunes, I do not have any dvd burning software like Anydvd that can interfere, and I've tried it on two different computers with no avail.  Any help is greatly appreciated.

    msoviolist, I opened a ticket via their so called "Express Lane" support page, I assume it'll take a couple of emails before they decide to credit you for the download. I would suggest linking to these two threads in the correspondence, this is what I included in the message;
    =========
    I've attached a couple of threads from the Apple support
    forums, it appears this is an ongoing problem for many folks trying to
    download the 3.1 upgrade for the 1st gen. iPod Touch, feel free to
    check them out;
    1) Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.
    https://discussions.apple.com/thread/3373167?start=0&tstart=0#
    2) How do I upgrade first generation touch software to 3.1.3
    https://discussions.apple.com/thread/3009667?start=0&tstart=0
    ==========
    Good luck...
    Message was edited by: SpanishClash

Maybe you are looking for