Error adding printer to Bonjour

I am getting the error message "An error occurred when trying to add selected printer" when adding my HP PSC1200 connected to Airport Express via Bonjour. When I tried to add the printer manually in "System Preference" ->"Print and Fax", "Printer Browser" recognized the printer, but it could not pick up the correct printer driver under "Print Using" picklist.
This problem occurs only on my Intel-based iMac, my Powerbook G4 running OS X 10.4.3 had no problem working with the printer over Bonjour. Does the Intel iMac required different a driver?
Steve

I am having the exact same problem with my OKIPAGE 8iM black and white printer. I have the latest print driver as shown on the OKI website installed but the Mac just wont print to it. I always get the message "An error occurred when trying to add selected printer"
My new DELL laptop running Windows XP prints straight to it using Bonjour for Windows so it cant be the old(ish) printer.
Also the Mac Keeps dropping the Airport signal (mainly after opening <Printer setup Utility> and getting the above meassage, BUT the Dell laptop still sees the ABS and continues to work fine on the Internet. So its just a Mac problem!
Come on any one else sorted this problm?

Similar Messages

Error Adding Printer Samsung CLX-3180 Series OSX 10.9

MacBook Pro Retinta Display OS X 10.9.4 8 G RAM; 2 GHz Intel Core
I am having troubling adding a printer to my recently purchased Macbook
I downloaded the drivers from the Samsung website for the CLX-3180 Series, the software installs (at least it says it did).
I then go to add printer under printers/scanners and select Samsung CLX-3180 Series from the window. Messages indicate that the software was downloaded and updated and then I get the message "An error occurred while trying to add the selected device; Unable to find an appropriate software on your system after running software update."
I then reset the printer system, update the system software, restarted the laptop and tried again; still get the same error message.
No clue what to do next.

OS X Mavericks: Reset the printing system

Error adding printer: software installed incorrectly

When I try to install a HP Photosmart C310 on my MacBook Pro and I use the AirPrint driver, which I always do (also on my iMac, where it does work), It gives the error: "The software for the was installed incorrectly..." In the console I can see the error: "System Preferences: File "/System/Library/Printers/Libraries/ipp2ppd" not available: No such file or directory".
I already did empty the entire folder Library/Printers/ and I did a reset of the printing system via System Preferences (and restarted my MacBook). Even after I reinstall the drivers from HP, both the errors keep coming. Suggestions for a solution are very welcome...

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

HT204135 Error adding printer to airport express.

I am trying to add an Epson SX425W to my Mac mini via an Airport express. My Mac finds it but then says..
"Can't install the software because it is not currently available from the Software Update server"
Im new to Macs, what does this meen please ?

This rather old link may provide some help (unless you've already tried it):
https://discussions.apple.com/thread/3914558
or this Help article from Apple: https://support.apple.com/kb/ts1253

Trying to add Canon MP500 printer via Bonjour; get Error -9672

I have my Airport Express hooked up to my Canon MP500 printer. My computer recognizes the Airport Express. I go to Print & Fax in System Preferences and try and add the printer via Bonjour - it stalls and then displays Error -9672. I have had this printer hooked up successfully before. Any suggestions? Thanks.

From HP Support
Reset the device when it is not functioning properly.
If the device is not functioning properly or to clear memory, reset it.
On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)
Wait approximately ten seconds and then press the <ON/OFF> button again.
Wait until the device has completed its cycling process before submitting another job request.
A number of site online mention problems with different brand printers on intel macs. Some have correcedt the problem by downloading an older driver that that which came with the computer.

"error while printing" when saving

A really odd thing started happening today: when I hit Apple + S to save a document, it first pops up the save progress box, but after a few seconds a 2nd box appears with a mesage saying "Print. error while printing."
I'm just trying to save, not to print. Any ideas what's going on?

on the wife's g4 powerbook, added a network-shared printer, attempts to print to it result in:
PMSessionValidatePrintSettings failed (error code = -50)
Invalid PMPrintSettings in print info
this same n-s-p works fine on my g4 powerbook, also 10.4.11...
and i haven't been able to print to this printer from my core duo minimac running 10.6.2:
3/1/10 6:55:37 PM AddPrinter[21005] Error loading /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: dlopen(/Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm, 262): no suitable image found. Did find: /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: mach-o, but wrong architecture
3/1/10 6:55:37 PM AddPrinter[21005] Cannot find function pointer HPPMPluginFactory for factory 00425E6D-6656-11D7-966D-0003934BEDFE in CFBundle/CFPlugIn 0x1444f750 </Library/Printers/hp/aio/PMs/hpaio_printpm.plugin> (bundle, not loaded)

Error while printing message

Hi
I'm hoping someone can help me I have a Macbook and have been using a HP Deskjet D5560 printer with it since i bought it and now it will not let me print each time i go to print it says error while printing. I have gone into some settings and had a little look but can't seem to fix the problem. Has anyone got any ideas? I am very basic with computers with things like this so please keep it simple if possible!
Thanks
Anna

You may have a file permissions error or some other corruption.
Try these one at a time (restart and try adding after each) -
Reset Printing System - a menu choice in Printer Setup Utility.
Download the 10.4.10 COMBO updater and re-update with that.
Try the free trial of Printer Setup Repair from www.fixamac.net.

"Error while printing" when sharing printer under 10.6

This just started yesterday. When attempting to print from either of two other computers (both 10.4.11) to a printer (HP LJ 1160) connected via USB to a MacBook Pro (10.6.2), the print fails with the cryptic error message: "Error while printing."
I have searched these help forums and have tried repairing permissions on all computers. I have also verified that the /tmp symbolic link is in place on all computers.
I have also tried resetting the print systems on all computers. I am able to add the shared printer on the client computers, but when attempting to print to the selected shared printer I still get the error.
The Console on the client computer generates the following items in the log:
2010-01-18 08:59:49.452 TextEdit[423] PMSessionValidatePrintSettings failed (error code = -50)
2010-01-18 08:59:50.812 TextEdit[423] Invalid PMPrintSettings in print info
Any ideas?

on the wife's g4 powerbook, added a network-shared printer, attempts to print to it result in:
PMSessionValidatePrintSettings failed (error code = -50)
Invalid PMPrintSettings in print info
this same n-s-p works fine on my g4 powerbook, also 10.4.11...
and i haven't been able to print to this printer from my core duo minimac running 10.6.2:
3/1/10 6:55:37 PM AddPrinter[21005] Error loading /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: dlopen(/Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm, 262): no suitable image found. Did find: /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: mach-o, but wrong architecture
3/1/10 6:55:37 PM AddPrinter[21005] Cannot find function pointer HPPMPluginFactory for factory 00425E6D-6656-11D7-966D-0003934BEDFE in CFBundle/CFPlugIn 0x1444f750 </Library/Printers/hp/aio/PMs/hpaio_printpm.plugin> (bundle, not loaded)

Error printing Check - "Missing Parameter Values. Error During Printing"

Dear friends,
Our client is in SAP B1 8.81 Pl07 and is facing an error while printing checks designed in Crystal Reports. As soon as they click on "Print" button, we are getting an error "Missing Parameter Values. Error During Printing".
We have checked the Crystal Reports and all the parameters are given.
Can anyone help me regarding this?
Thanks and regards,
Bharath S

hi,
Quoted from Note 1555170
1555170 - Error 'Missing parameter values' printing with CR layout
Symptom
When you print on add any stock transactions document, with Crystal report layout, you receive error message:'Missing parameter values' and then 'Error during the printing; ensure all parameters are defined'
Step by Step scenario:
1.Go to Administration / System Initialization / Print preferences and select the tab per document.
2.Select the document stock transfer and tick the box print document when adding document and click on update.
3.Go to stock management / stock transactions / stock transfer
set the Crystal report template as default.
Note:
- The issue is reproduced also for Goods Receipt and Good Issue.
- The issue is reporduced with any Crystal Report Template for the     above documents.
Cause
Program error
Solution
This issue is candidate for a change in a future release of SAP Business One.
Workarounds:
1.Use PLD for printing the stock transactions.
2.Convert the PLD layout to Crystal reports with Crystal converter.
3.Print the document after adding it.
Other terms
sap business one, printing issues, good issue, good receipt, stock transfer, crystal report, print preferences, print when adding, dockey, missing parameter
Header Data
Released on     07.02.2011 13:27:30
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with low priority
Category     Program error
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
8.81
you can download the PLD to Crystal Converter [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71]
regards,
Fidel

Out of Memory Error while printing to PDF

I am using Apache FOP with OC4J on windows platform for printing to PDF. I got the following error when printing a report with about 10,500 records to PDF.
07/09/20 15:23:07.78 fop: Servlet error
java.lang.OutOfMemoryError: Java heap space
Is there a way out of this problem. Could anyone please give me some suggestions?
Thanks in advance
Ravi

You can try adding a -Xmx128M (or larger) when you run the java command to start oc4j.jar

Error while printing.

Error while printing.

PowerPC Mac 10.4.11, Print with Safari with: Error while printing.
Others AP: Printer Setting Utility can't pop up, no effective.

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

Error during print request output. l_rc = 1

Hi ,
I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
I am using control set to copy file at desired location on server
COPY &F <path for file to be copied>&T
File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
Complete log is below:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
1 file(s) copied.
End of message
Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 29343
Request name SCRIPT ZRAJ BASISADMIN
Client 220
Owner BASISADMIN
Request attributes
Time created   2008102906203900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device ZRAJ
Default no. copies 1
Format X_PAPER
Main print request characteristics
Spool request number 29343
Print request number 1
Print request attributes
Time created   2008102906203900
Output device ZRAJ
Format X_PAPER
Character converter active when first problem occurred
No information available
Pls help.
Regards
Raj Kiran

If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
so do a search in SCN before posting your question.
Regards
Karthik D

Error adding printer to Bonjour

Similar Messages

Maybe you are looking for