Error Addition to stock of material A in storage type 002 is not allowed

Dear all,
I am doing GR for PO in WM. During TO creation I am getting this error Addition to stock of material A in storage type 002 is not allowed. Hence no storage bins can be entered. May I know under what scenarios this type error props up?
Thanks in advance,
Prashanth

Please find the explanation in SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
SPRO > LE > WM > Master Data > Define Storage Type
Check
- putaway strategy --> V_T3010-STEIN
- addition to existing stock indicastor ---> V_T3010-ZULAG
As you can read in the help, other factoers such as capacity may influence this.
Regards,
Csaba
Edited by: Csaba Szommer on Feb 19, 2010 7:55 AM

Similar Messages

Search for material from 2 Storage types

Hi,
When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the source storage type
657 ( for example). The requirement is that the system should also look for material from source storage type 460 ( for example).
I did the following customization ( SPRO path):
1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
2) Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
With the above the system does the search from 657 stoarge type only and not from the both.
Is there any other setting to meet this requiremnet?
Best regards,
Prasad

Hi,
I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
The requirement in detail is as below:
There are 2 plants ( AL70 & AL77) linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
Regards,
Prasad

TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

JITOM error movement type 000 is not allow (check your entry)

Hello experts,
In transaction JIOM i try to do an ACTION, but the system display below error message.
movement type 000 is not allow (check your entry)
Could you please help me this is very urgent..
Regards!!
Hugo

Hello Hugo,
Can you clarify what the functionality of transaction JIOM is? I am assuming that this is your own transaction? Going from previous cases of error L3001 being raised, this is almost always associated with the creation of TO documents, can you confirm this is correct?
Can you check that the Item category is relevent for picking? (Transaction 0VLP)
Regards
Stephen

Zero stock check for a bulk storage type

Hi Experts,
We have a requirement to do the zero stock check for a bulk storage type. As a standard SAP it is not allowed to do the zero stock check for a bulk storage type. Is there any way to do this?
Thanks & Regards
Sanpan

Hi Sanpan
I am in a similar boat.
We have a Bulk warehouse with storage types with 'B' putaway strategy. We would also like to instigate zero stock check but get the message Zero stock check not supported in bulk storage areas with storage units
Message no. LT246
Did you find a solution to this? Or have you coded a solution?
Many thanks
Adam.

Materialized view ....subquery expression not allowed

Hi,
I have been assigned to create a materialized view using the following subquery.
When I executed it is giving error ora-22818:subquery expressions not allowed here. The same query is good for view but not MV.
Can anybody help me in writing MV for my query.
select rownum as ROWNUMBER,f.id Folder_ID, concatyear(f.id) year_name,
(select nvl(fr.requestor,fr.requested_by) from fts_folder_request fr where
fr.folder_id=f.id and fr.status=0 ) Pending_Requestor,
(select nvl(fr.requestor,fr.requested_by)
from fts_folder_request fr,fts_folder_checkout_history fch where
fr.folder_id=f.id and fch.folder_requested=fr.id and fch.return_date is null) CheckOut_To from fts_folder f;
Thanks in advance.

Any help in creating MV for my query.It contains subquery expressions that have to be avoided in MV.
select rownum as ROWNUMBER,f.id Folder_ID, concatyear(f.id) year_name,
(select nvl(fr.requestor,fr.requested_by) from fts_folder_request fr where
fr.folder_id=f.id and fr.status=0 ) Pending_Requestor,
(select nvl(fr.requestor,fr.requested_by)
from fts_folder_request fr,fts_folder_checkout_history fch where
fr.folder_id=f.id and fch.folder_requested=fr.id and fch.return_date is null) CheckOut_To from fts_folder f;
Thanks.
Message was edited by:
user617694

How to restrict the material for speific storage type

Dear all,
i am maintained the X - material to 001 warehouse and 001 rack storage type when i try to create TO for putaway process it will allow me some other storage type like open,shelf....as per my client requirement it should not be .....
i am using manual strategy for putaway proces ....kindly guide me....
Thanks
Muthuraman.D

Hi,
The storage types during Putaway are proposed based on the strategy defined.
Change the stcok placement indicator in WM view 1.
If you have a storage type search strategy defined that matches your requirement, then maintain the same in WM view 1 for the material
Hope this helps
regards

Negative stock how do we get this material out of Storage Type 921

thanks for the reply ,
but i am confused in t-code LB10 i have to give source storage stype can u explain step by step.
thanks in advance

As the perviuos answer, your question is a bit incomplete.
LB10 will give you transfer requirements according to either source storagetype or destination storagetype. So if you put 921 into both source and destination, then you should get all transfer requrements in and out of 921.
Then if you find the TR you are looking for you can go to LT04 and create the TO and then define correct destination.
Maybe this answers your question, else try specifying it a bit more.
Regards
Ivar

Error 1050, when calling MATLAB 7.1 from LV8.0 - Function Definitions not allowed.

I am trying to call a MATLAB M-file from LabVIEW 8.0. I keep getting Error Code 1050:
"Error 1050 occurred at LabVIEW: Error occurred while executing script. Error message from server: ??? Error: Function definitions are not permitted at the prompt or in scripts.
. in rickfito.vi->impedo.vi
Possible reason(s):
LabVIEW: Error occurred while executing script"
I tried running the sample MATLAB script example on the knowledge base, and everything works fine.
I am guessing that this error is happening because I have functions defined in the MATLAB script. But i thought this is better programming techinque. Also, the MATLAB window opens up when I start the VI.
Is there a way around this? I really do not want to remove the function definitions on the script.
Thx,
Pelo...

First, see if the Matlab Script Node is trying to open any files. If
so, then make sure that the current Matlab directory is set to the
directory where that file is located. The Matlab script node in LabVIEW
does call the Matlab script server and executes the function in the
Matlab script node through Matlab. Therefore, even though LabVIEW may
be in the correct directory where the file is located, make sure Matlab
is as well.
The error may also occur if there is a disruption
in the script server between MATLAB and LabVIEW and the connection was
never re-established (possibly by closing MATLAB prematurely). Close
both LabVIEW and MATLAB then relaunch them both and run the VI.
MATLAB®
is a registered trademark of The MathWorks, Inc. Other product and
company names listed are trademarks and trade names of their respective
companies.
-Bob
-Bob

Error states ''Putaway in storage section SSA is not allowed''.

Edited by: Sunny on Sep 11, 2008 10:26 AM

Hi
You need to check that you have the correct strategies set up for storage sections and for storage bins and for storage unit types that they are allowed to go where you are trying to put them
Frenchy

How to delete the material records related to storage type

Dear SAP guru's,
I got a situation that if the material "XXXXXX" exists in two different storage type (let say 001 & 002 ) and the material needs to be removed out of one (Let say 002) to avoid the picking and putaway in future.
Inorder to accomplish an above requirement we tried the below cases
Case 1: By flagged the material "XXXXXX" under storage type 002 in MM06 transaction.But it didn't restrict the system on allocating and removing the stock from /to to the storage type 002.
Case 2:After we flagged the material for deletion under storage type 002 ,we used to MM71 transaction to archive & delete the material record that assocaited with the storage type 002 completely.
I am kind of queiries to know if there is any other method or procedure available to delete the storage type associated material records in SAP.
Please guide me with the other options.Thanks.
Regards,
John.

Hi John,
Its very simple, remove the Storage type indicators from the material master - Warehouse View 1 at Stock placement & Stock removal section, with this it won't pickup or place the materials in the concerned storage type.
If you have extended this materials to more than 1 storage type, you need to do the same for all the storage types.
Reward if it is helpful.

Error during Stock movement between two storage type

Dear Friends
How do i move the stock from one storage type to other storage type within a warehouse?
In the material master i have maintained a storage type indicator for automatic storage type determination.
now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
Error occurred during storage section search (1740 003)
Message no. L3041
Diagnosis
No storage area search has been defined for this material and this storage type.
Please assist
Thanks

Dear,
Kindly specify the storage section indicator in Material Master - WM view.
Regards,
Sandip

Error in PR creation in material code?

hii experts,
While creating PR i m getting error , the material length is not set ..etc??
Becas in my case i have created material master and it has given a number also for material .
The same material while using in PR creartion its not allowing me ??
How i can rectify this ??
Thanks.

Hi,
Check Manufacturer Part Number activated or not? Also check OMSL t.code for Lexicographical & Leading zeros section.
http://help.sap.com/saphelp_di471/helpdata/en/08/a1110f4d7611d2b438006094b9c9be/content.htm
http://www.sapgeek.net/2010/03/material-numbering-configuration/
As system cretaed a material number, you should not have any issue for creating PR, Just check above links:
Regards,
Biju K

Upload stock for material in storage type ??

hii
How to increase stock for particular material in LS26??
Stock for ware house and storage type ??
Thanks

Hi,
you need to create some stock in the bin for whatever the operation you are doing. Here are the steps.
first check if you have stock of same material in any of the other bins using LS24. If so, create TO using LT01 (mov type 999) for source and destination bin (bin of your interest) and confirm the TO. Do your operation, it should work.
If its a test system, you can try upload stock in IM using MIGO-501 mov type or MB1B-561 mov type. Crate TO for material document using LT06 (TO may get automatically generated based on your system settings). Confirm the TO (note the destination bin). If the destination bin is not same as the bin of your interest, use first option to transfer stock to bin of your interest.
Thanks,
Ram

Available stock shortfall of & in Interim storage bin message in BAPI_GOODSMVT_CREATE

Hello Abapers,
I have created a Zprogram and used a standard function module BAPI_GOODSMVT_CREATE.
while processing this FM, Iam getting error messages in return table as "Available stock shortfall of & in Interim storage bin".
Please help or suggest.
Regards
Pradeep

Searching on the forum you can find threads about WM/PP interface settings.
(Re: WM Staging - Supply area to Production prder)
Whether WM/PP interface is active it depends on your config and master data as well.
You should check:
- config: SPRO > LE > WM > Interfaces > Define Production
- master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

Error Addition to stock of material A in storage type 002 is not allowed

Similar Messages

Maybe you are looking for