Error ADS: com.adobe.ProcessingException:Could not retrieve(200101)getting

Hi,
In our development system CD2(ECC backend system) when I am acessing t-code PHAP_CATALOG_PA->Category Group/Category/Template>Zero Harm>DRA JKSW2>Preview --->Print Layout giving below error.Here PD7( Dev portal ) is acting as frontend.
Error :
ADS: com.adobe.ProcessingException: Could not retrieve(200101)
Message no. FPRUNX001
Diagnosis
An error occurred when Adobe Document Services (ADS) was launched.
System Response
Error message
Procedure
When troubleshooting, follow the steps described in SAP Note 944221.
First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. From SAP NetWeaver Release 7.0, the program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
Please help in this case.
Regards
Nilesh

Hi,
Perform the ADS configuration check as specified in : http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f0638873b56bede10000000a11466f/frameset.htm
You need to check all the configuration steps to makesure everything is setup right. Also, try after restarting your Java engine where ADS is installed. Check your ADS RFC connection using SM59 tcode, and check whether ADSUSER and ADS_AGENT are not locked.
Try and let know.
Regards,
Shahid.

Similar Messages

  • ADS com.adobe.ProcessingException : Could not retrieve credential for alias

    Hi,
    I have configured ADS in NW730 EP system which is connected to ECC 6.0 system.
    When i perform the configuration tests in SA38 as per note 944221 ,
    i get the following error when executing FP_TEST_IA_01
    ADS com.adobe.ProcessingException : Could not retrieve credential for alias : ReadersRights(200.101)
    I have installed the credentials in the \usr\sap\<SID>\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials
    Please help me with the situation

    Hi Florian,
    In my case the NW is 731. In NWA / Configuration / Infrastructure / Adobe Document Services / Documento Security, I put the pfx file through Manage P12 files... After this I added ReaderRights Alias and password that SAP sent me with pfx file.
    But after configured this alert message appear:
    "Could not retrieve the expiry date of the selected credential. This means that either the entered password is incorrect, or no JCE (unrestricted version) installation is available. See SAP note 1294782 for further details"
    I think that this is my problem. I think that because this message that FP_TEST_IA_01 report doesn't run. I've already updated JCE files and password is correct because SAP sent me.
    Regards,
    Alexandre

  • Error "ADS: com.adobe.ProcessingException: X Exception - P(200101)"

    Hi folks,
    I created a new Adobe Interactive Form which is quite simple. There's just a header and the personal number of an employee to be printed. I binded a structure (contains 10 fields) to the context and de-activated all of the fields except  the field personel_number (defined as CHAR8).
    The form is ok when it's execuded by TA SFP.
    Running the form via a print program it aborts with "ADS: com.adobe.ProcessingException: X Exception - P(200101)".
    When I deactivate the personel_number in the context the form the error does not occur.
    The ADS works well. FP_CHK_REPORT and FP_PDF_TEST_00 report no problems.
    My problem is quite similar to [ADS: com.adobe.ProcessingException: com.adobe.Processin(200101); just the other way round.
    Regards,
    Steffen

    I fixed the problem on my own. There were probably 2 bugs:
    1. I deleted the form, the interface and the ddic objects. Then I started from scratch that means creating again ddic objects and the interface. When I created the form I recognized the layout type "standard form". I'm quite sure that this option was not selectable on form I deleted.
    2. It also could have been that the data structure of the context contained wrong data e.g. a numeric field contained non-numeric stuff (X'00')
    Maybe these informations are helpful for somebody.
    Regards,
    Steffen

  • ADS: com.adobe.ProcessingException: Class not found exception while loading

    Hi All,
    While i'm trying to activate FORM (Interactive Form in Transaction SFP), i'm getting error -
    ADS: com.adobe.ProcessingException: Class not found exception while loading class SAPForm, classpath: /usr/sap/AHS/DVEBMGS00/exe/jstart7 1.jar/usr/sap/AHS/DVEBMGS00/exe.
    Could anyone let me know the way to resolve this issue.
    Thanks and Regards,
    Sunil

    Many Thanks for the reply-It's working now
    I added the MySQL connector in the following manner
    1)Open the Tom Cat server console by Selecting 'Servers' in Package Explorer
    2)Right Click 'Tomcat v5.5 at localhost.server'
    3)Select 'Open Launch Configuration' under 'General Information'
    4)Select the 'Classpath' tab in the Edit configuration window that opens
    5)Select 'Add External Jars' and add the required connector

  • System Error:ADS :com.adobe processingException:XMLFM Exception during render Exception

    Dear All, We have configured ADS in DEV and QAS it is working fine. We have done the same configuration in PRD but it is giving the following error when we execute the program FP_CHECK_DESTINATION_SERVICE: SYSTEM ERROR: ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE(200,101). Exception of class CX_FP_RUNTIME_INTERNAL System Info : SAP ECC EHP6 SAP NW 7.31 Kindly suggest some solution. Regards, Mustafa

    HI
    Note 944221 - Troubleshooting if problems occur in forms processing
    Note 717568 - FPRUNX001, 002 or 004 with output of PDF-based forms
    Note "959462 - ISR/Adobe/Web Dynpro Java: Configuration problems"
    Note 1288500 - HR-RU: ADS: XMLFM Exception-P(200101) message no.FPRUNX001
    Note 1143442 - Shift report: Error "ADS: XMLFM Exception"
    AND YOU CAN CHACK AGAINST FOLLOWING Problem:
    1). Check the JCO RFC from Java to ABAP server.
    2). Check the ADS connection in SM59.
    Check the document more troubleshooting steps
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?QuickLink=index&overridelayout=true
    http://forums.sdn.sap.com/thread.jspa?threadID=842415

  • ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)

    Hi,
    Exception       SYSTEM_ERROR
    Message ID:          FPRUNX                     Message number:           001
    Message:
    ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)
    I am getting the above error while executing adobe forms function module.
    Any ideas.
    Regards,
    Thiyagu

    the J2EE User Management Engine has a configuration for setting an expiry date for passwords. Because of this setting, you can get an error after the password expires. (see documentation at http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/16c43bdd3da244a1d3372a77b5f83f/frameset.htm) This could be a reason here.
    Try this:
    Check the user ADSUser in the Visual Admin: -> Server -> Service -> Security provider -> UserManagement tab
    -> ADSUser
    Enter a password again and check 'No password change is required'.

  • ADS: com.adobe.ProcessingException:XMLFM Exception - T(200101)

    Hi ,
    we have two IDES.one is ECC5 & the other is ECC6.Again they access a
    common Java Instance for ADS.We have configure the ADS as per the
    standard documentation by SAP. ADS on ECC5 is working fine. But on ECC
    6 system, when we see the print preview for report FP_TEST_00 we get
    following error--
    Exception SYSTEM_ERROR
    Message ID: FPRUNX
    Message number : 001
    Message : ADS: com.adobe.ProcessingException:XMLFM Exception - T
    (200101)
    any usefull hints to solve this problem..thanks in advance

    1)when i execute FP_PDF_TEST_00 at se38 its run fine and shows that
    222bytes transferred
    2)when i execute FP_CHECK_DESTINATION_SERVICE AT SE38 without clicking the destination service connection-ADS  it works fine.But when i execute FP_CHECK_DESTINATION_SERVICE AT SE38  clicking the destination service connection-ADS  its shows the following error
    SYSTEM ERROR:com.adobe.ProcessException:Parser Configuration error while extracting properties from form template
    3)Again in search of the defaulttrace.trc i went to usr/sap/<SID>/<INSTANCE>/j2ee/cluster/server0/log/
    folder but i find so many defaulttrace.trc files.Like defaulttrace 1.trc, defaulttrace 11.trc,defaulttrace 13.trc etc.Could you plz tell me which .trc file i have to check & what to check???

  • ADS: com.adobe.ProcessingException: Problem accessing d(200101)...different

    Hello
    I searched and read a lot about this error and try to fix this but finally I got into unique situation....its like,
    various test for ADS works fine... like FP_TEST_00 , FP_PDF_TEST_00, destination test etc.. all works fine but when I create my own form and try to run this... I get this error. Even I just copied FP_TEST_00 into ZFP_TEST_00, just to make sure I'm not doing anything wrong in form development, it still give me this error.
    I dont know what should I do.. I dont have access to ADS settings..
    Anyone if have any idea how I can proceed to solve this, that will be greatly appreciated.
    Regards

    Hello Ajay,
    1. I guess you activated all three Interface, Form and program...
    2. I guess you checked FP_TEST_00 with tcode SA38...
    3. I guess you called your basis team to check if everything is O.K with the J2EE Server
    4. I guess you checked ADS is defined in T-CODE SM59 ...(Under HTTP Connections to External Server... ADS)
    Ajay,
    If one or more guesses is wrong then you have to check it...
    If the J2EE Server is down then you wont be able to activate your FORM .
    I hope this helps
    and if not... Sorry... i don't know how to help you on this one...
    Eran

  • ADS: com.adobe.ProcessingException: Problem accessing d(200101)

    Dear Expert,
    Please resolve my Problem....
    I Have made one Form, while testing I am getting Given Above Error, Whereas i have tested So many Standard Adobe Form and z adobe form but They are not giving any error, Please tell me where should i check For the error which is occuring only For my this adobe Form.
    Regards
    Shelly Malik

    Hi Shelly,
    Can you please share the solution for this issue??

  • Error: com.adobe.ProcessingException: Problem accessing d(200101)

    When I run the transaction ooam to generate a PDF document i got the following error:
    com.adobe.ProcessingException: Problem accessing d(200101)
    Someone could help me?
    Tks.
    Erik Brison

    Hi Andreas,
    Firstly thanks for your help!
    I checked the note 944221 and solved some problems, but when i tried to run the transaction again, i got the following error:
    ADS: com.adobe.ProcessingException: Could not retrieve(200101)
    Do you have any other ideia?
    Erik Brison

  • ADS: com.adobe.ProcessingException: PDF is not interactive

    Hi All,
    I have a ECC 6.0 ABAP SP12Stack installation and a seperate NW04s SP13 Portal installation. I have done all the configuration steps of ADS integration on those 2 systems.
    I developed a WebDynpro application and used the interactive form object referring to a simple  Adobe form created with transaction SFP. As I test the Webdynpro ABAP application I get the following error "ADS: com.adobe.ProcessingException: PDF is not interactive.  Data can only be imported into interactive forms.(201501)" in UPDATE_PDF method of class CL_WD_ADOBE_SERVICES. Do you have any idea for the reason of this error?
    Best Regards,

    Hi.
    Can it be applied to AS Java version too? Our system was updated from SPS12 to SPS16, and the following problem comes up:
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "MergeData" operation.
    Request start time: Wed Oct 08 16:49:20 BRT 2008 com.adobe.ProcessingException: PDF is not interactive. Data can only be
    imported into interactive forms. Exception Stack Trace: com.adobe.ProcessingException: PDF is not interactive. Data can only be
    imported into interactive forms. at com.adobe.ads.remote.EJB_PDFAgent.importFormData(Unknown Source) at
    com.adobe.ads.operation.MergeData.execute(Unknown Source) at com.adobe.ads.operation.ADSOperation.doWork(Unknown
    Source) at com.adobe.ads.request.Request.processOperations(Unknown Source) at com.adobe.ads.request.Request.process
    (Unknown Source) at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source) at
    com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source) at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120) at
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke
    (NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at
    java.lang.reflect.Method.invoke(Method.java:324) at
    com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126) at
    com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157) at
    com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79) at
    com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92) at
    SoapServlet.doPost(SoapServlet.java:51) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
    (HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at
    com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at
    com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at
    com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at
    com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
    (ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
    (MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at
    java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
        at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:400)
        at com.sap.tc.webdynpro.pdfobject.core.PDFObject.inputPDF(PDFObject.java:4003)
        at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInputPDFHandler.handle(PDFDocumentInputPDFHandler.java:139)
        at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
        at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:100)
    The Interactive Form was working well before the update. As soon as we set our patched Web Dynpro development environment to use an ADS not yet patched, it works perfectly.
    Regards,
    Douglas Frankenberger

  • ADS: com.adobe.ProcessingException: Error exporting Data into PDF

    Hi Experts,
    when trying to upload a PDF file to my WD4A application and extract the data I am getting this ADS Error:
    ADS: com.adobe.ProcessingException: Error exporting Data into PDF - PDF Exception: Invalid object for the XFA entry in the forms dictionary.(200201).
    The error only appears when I`m trying to upload a PDF file that has been created after an Java Script Update of the Adobe Form Builder. My actual version is 710.20070621204053.403203.403203 - ContainerFoundation_JS.
    All PDF files created before this update can be uploaded without problems. Am I missing something to be updated?!
    Thanx & best regards,
    Oliver

    Dear Oliver,
    I am facing this problem, can you recall how did you resolve this, please ? Thank you.
    Regards
    Kir chern

  • ADS: com.adobe.ProcessingException: Unable to load or c(200101)

    Hi,
    We configured ADS and it was working fine.
    Now it is giving me an error "ADS: com.adobe.ProcessingException: Unable to load or c(200101) "
    when i execute FP_TEST_00 program where as it is giving me the version info when i execute FP_PDF_TEST_00.
    All the settings are in place but it is giving me this error and am unable to get any solution for this.
    Please guide me with a solution.
    With Regards,
    Pradeep.B

    Dear Nelis,
    We saw the ADS trace file and we found that Operation properties file was missing.
    As we have moved to the new server, we copied the properties finle in the new server and the problem is solved.
    Thanks for your valuable suggestions.
    With Regards,
    Pradeep.B

  • Error Info... FPRUNX 001: ADS: com.adobe.ProcessingException:

    Anyone every run into this error after saving a PO?
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    The full message is:
    System ID....   PR3
    Client.......   100
    User.........  ELBURGD
    Transaction..   ME21N
    Update key...   4EC42600E07900E1E10080000A14402B
    Generated....   17.11.2011, 06:09:20
    Completed....   17.11.2011, 06:09:24
    Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    Using SM13 it says:
    Function Module:  RV_MESSAGE_UPDATE
    Status:                  Update was Terminated
    Class:                   FPRUNX      Number: 001
    FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
    This happens seemingly randomly in production after the user saves a PO.  They'll create a PO, save it, get the PO number , start a new PO and a message box pops up saying: 
    Express document 'Update was terminated' received from author 'xxxx xxxxx'
    If the user goes back to the PO to look it up, the PO does not exist.  If the user creates a new PO (or recreates the one that failed to commit to the database), it'll save with no trouble... same print settings, same everything.  This leads me to believe the problem isn't with the PO form but with the ADS.  The PO form is custom and works without error in dev and QA.  I do believe the users are setting the message options to Print Immediately.
    I am unable to recreate the problem in dev or QA, and it appears randomly in production.  I've run the ADS test programs in production and they come back without errors.
    Has anyone run into this before?  Are there some settings on the ADS that might need to be adjusted?  I don't think this is form related since we're able to recreate the same PO and save without error immediately afterwards, but could this be a form problem?
    I am open to any and all experiences you've encounted, and any suggestions you may have.
    Jeff Kulbeth

    Recently I had the same error with Adobe Form. In my case there were a few problems regarding data binding and data format. In a Form there was unresolved data binding warning and data format mismatch with one field - Form interface contained variable of type decimal and in the Form content that variable was bound to the field of type numeric with data format integer. Adobe Form with such kind of issues can be activated without errors but during Form call you get error FPRUNX001
    So my advice would be to consider things like:
    Resolve data binding warnings. Its in the Report palette witch by default is located in the bottom left corner of the vertical palettes bar.
    Check that Form interface data types match with Form content fields data formats in data binding sub-menu.
    Also in your Form calling application you can trace ADS by using these function modules:
    FP_GET_LAST_ADS_ERRSTR - provides texts about the cause of the error
    FP_GET_LAST_ADS_TRACE - provides a trace of the Adobe document services

  • ADS-error: com.adobe.ProcessingException: Problem accessing d (200101)

    Hi Experts,
    On the ADS have been tested for 944221 without a note of paragraph 6 "Generated PDF with additional information". ADS is working locally.
    But on the another server occurs errors
    "ADS-error: com.adobe.ProcessingException: Problem accessing d (200101)"
    when printing on ADS server.
    On another server have been tests
    FP_TEST_00 - ok
    FP_PDF_TEST_00 - ok
    FP_CHECK_HTTP_DATA_TRANSFER with ADS -  false
    FP_CHECK_DESTINATION_SERVICE with ADS - ok
    FP_TEST_IA_01 - ok
    Edited by: Aidar Samigullin on Jul 27, 2010 1:47 PM

    http://www.google.com/search?q=ADS-error%3Acom.adobe.ProcessingException%3AProblemaccessingd+(200101&sourceid=ie7&rls=com.microsoft:cs:IE-SearchBox&ie=&oe=&redir_esc=&ei=sspOTP6lC4usOKnIjNIC

Maybe you are looking for