Error after 1.1.1 update. iPhone/dock says "Accessory is not made to work..

"This accessory is not made to work with the iPhone" when it's in the Apple dock....
The option is to turn on Airplane Mode....
Whatsup with that??

I have the same problem, standard connector/stand that came with the iPhone hooked directly to the usb port on my MBP. Stupid iPhone doesn't recognize it's own dock. No hacks, no jailbreak or anything ever done to the phone.

Similar Messages

Please Help "This accessory is not made to work with iPhone" iPod??

Hiya i wondered if someone here can help me please.
Today i went to play my ipod feature on my iPhone and it started playing on the iPhone speakers which i wanted, Then all of a sudden it stoped i checked it out and had an error message saying the following.
"This accessory is not made to work with iPhone
Do you wish to switch to aeroplane mode
YES/NO"
There is no accessory connected to the phone and also it has not been in contact with water which i heard sometimes triggers this error.
When i press the NO option the volume cuts out and the volume slider disapears on the ipod and also the volume buttons dont work.
I dont really want to factory restore it but if thats my only option then i will do it. Also i have only had the phone for less than 20 days.
Any Help/Advice is really apprieciated.

Check your iPhone's dock connector port for any dirt, lint, or foreign material, and it doesn't take much.
If clear, the standard troubleshooting steps in order are power your iPhone off and on, an iPhone reset - which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, restoring your iPhone with iTunes from your iPhone's backup, and restoring as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, you can call AppleCare or make an appointment at an Apple store if there is one nearby.

"This accessory is not made to work with the iPhone"

Makes sense right? Yes, that is if there's something plugged into it that the iPhone doesn't support. Problem is, there's NOTHING plugged into my phone. This message literally pops up every 5-10 seconds, and below the message it asks if I want to turn on airplane mode to reduce audio interference or something. Has anyone experienced this problem? I've heard of it being fixed by popping out the sim an popping it back in, didn't work - plugging in headphones an unplugging them, didn't work. Is my dock connector shorted? If that's the case I can just buy a new dock connector for $30 on ebay, take apart my phone an replace it an everything should be good then right?

oswaldswell
Posts: 1
From: Shropshire
Registered: Feb 24, 2010
Re: "This accessory is not made to work with the iPhone"
Posted: Feb 24, 2010 3:49 AM in response to: Dizzy714
I too struggled with the same problem after updating some 5-6 apps on miphone the same day i upgraded itunes software to 9.1.1(12)
lost volume from onboard speakers, volume control etc...
after deleting the updated apps one by one, rebooting after each loss I found this post(among dozens) and tried plugging in The SAME cable from my hours worth of troubleshooting,syncing only This time into the Wall plug...
Instant sound! from ipod/onboard speakers.
THANX bunches to "Oswaldswell"
not sure why or for how long...

"This accessory is not made to work with iPhone"

I have a first generation iphone. It recently started showing a message that reads:
This accessory is not made to work with iPhone
Would you like to turn on Airplane Mode to reduce audio interference?
You will not be able to make call during this mode
YES NO
There is no accessory in the phone. Any thoughts on how to stop this behavior?
I tried reloading the OS and it didn't help.

I was having the same problem and it was draining my battery! After reading a couple of threads I was resigned to take my 1st gen iphone to the genius bar to see if they could do something. Before going to the bar I took off my pics, videos, movies, podcasts, and some applications in preparation for my visit. That night the problem stopped. This had been happening for about 3-4 weeks so I could replicate at will. After removing things from the phone when I tried to replicate the problem it would not happen. So I then started to re-sync things one at a time. After re-syncing everything but the applications I still could not replicate the problem. My feeling is that one of the applications, or combinations of, was causing the issue. I have not re-synced all the applications at this time because I am happy to have my phone back. Hope this helps.

Iphone will not charge via usb-to-computer nor via brick; I've tested with two different cables. Just before this problem arose, I got messages similar to "This accessory is not made to work with iPhone."

Most of my concern is in the subject line. I probably should've saved some content to include here. Allow me to elaborate:
While traveling with the tiny brick, I got a message on my 3GS phone that "This accessory is not made to work with iPhone”; however, the charger was working fine with another phone and with an iPad.
I tested alternatives by removing and re-inserting the cable (obviously, as I tested other devices), changing wall receptacles, shutting the phone off (all the way), all to no avail.
When I got home, I plugged a different cable--one that was connected to my iMac rather than the brick--into the my 3GS; it still didn't charge.
So, I'm hypothesizing that perhaps some debris (from a pocket?) got into the charging receptacle of the 3GS and is disrupting the connection. Perhaps there are other hypotheses.
I am reluctant to do a reset, as (a) the problem doesn't appear to be a software issue (the phone and software are all working, though the charge is declining) and (b) I don't want to lose the contents before I can sync it (now that I'm home, again).
I'd welcome suggestions. Meanwhile, I suppose I shall e-mail photos and notes from the phone to myself before I lose the remaining charge.

Try to clean the 30-pin receiver slot either by blowing air into it or using a microfiber cloth. If the problem persists, based on what you've already said, I'd say the problem is most likely hardware, and would need to be replaced or repaired. I hope your iPhone is still under the 1-Year Manufacturer Warranty, or if applicaable extended warranty. You can check by calling AppleCare National iPhone Technical Support at 1 (800) 694-7466.

New PC – Trying to update iPhone 5, says there is not enough space

I recently purchased a new PC. I transferred all of my music from iTunes on my old pc to my new pc using an external hard drive, and imported the playlists. Now, when I try to sync my iPhone to my new pc, it says there is not enough space.
It appears that itunes thinks that I am trying to add additional music to the phone, rather than replace the music that is already on there. How do I go about syncing my phone with my new pc (ie, replacing the music that is on my phone with the same music, just from a different computer)?
If I restore the phone to factory settings and update using a recent backup, will this fix the problem, or will I run into the same issues afterwards, as the music from the backup is technically from my old pc?
Thanks in advance

Hello, jeffh_26.
Thank you for visiting Apple Support Communities.
If you are receiving this alert when syncing, here is the article that will help you with that issue.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers,
Jason H.

Constant This accessory is not made to work on iPhone . Java script

How and why can I stop my phone from telling me my phone is not made for this accesory when it is not plugged to anything? It 1 wakes phone and drains batts 2 interfere with headphones and most important is f*#king annoying please help my sanity c xxxx

Hi Chris,
Try the general tips in this article: http://support.apple.com/kb/TS1505
If the issue persists after trying the tips in the article, the iPhone may need repair or replacement. This article: http://www.apple.com/support/iphone/service/faq/ provides more information about iPhone service options.
-Jason

This Accessory is not made to work with the iPhone (apple headset cable)

Is it just me or are others seeing this whenever you plug in the iPhone headset USB cable to your iPhone ... not sure what gives here, but it's quite annoying. I have the cable plugged into a 23" ACD USB hub (not sure if this makes a difference or not).
Considering that this headset is made to work with ONLY the iPhone and that this is the only way to hook it up and charge it I'm a bit miffed about this. I was kind of let down the quality of the headset to start with (everyone says it sounds like I'm stuck down a well when talking to them) and to top it off this message appears every time I plug things in to charge them up.
Is this a new issue with the 2.2 firmware update, or is this a more wide spread issue? Having to tell it every time not to put my phone into airplane mode is quite annoying :/ Not sure why there would be such an issue with an Apple cable made specifically for this task plugged into an Apple monitor.

Hi Allan
Thanks for the response. Connected directly to the front of my Mac Pro is didn't display that message. The funny thing is that when I moved it back to the ACD USB port I no longer got this message (for now, it's been hit and miss in the recent past as well).
Why it makes a difference on the ACD ports I don't know, according to the USB 2.0 spec there should be zero difference in connecting to a hub vs. directly to a port on the computer unless the hub is not up to spec and I have no issues using any other devices at all on the USB ports on my 2 ACD's. Smells like a bug to me. It's also hit and miss that the headset shows as charging or not on the iPhone. I just tested it with the Mac Pro front plug and had the same issue. It took 4 times unplugging and replugging until the iPhone knew it had a headset attached to it (which included a reboot of the iPhone to make sure the issue wasn't on that side). All the connectors are clean -- the headset and cable are < 1 week old. The iPhone I just took a good look and and for good measure even blew it out with some compressed air.
Either way around I'm still very unimpressed with the QA on this product. I don't think it will be around much longer. Hopefully others won't get sucked in and spend their hard earned $$ on this overpriced piece of hardware. I did read the reviews on the apple store but chose to ignore most of them (lots seemed like rants). I can now testify first hand that it doesn't seem to be all it's cracked up to be, especially on the sound quality front
I'll leave this thread open for a while longer as I want to see if anyone else is having this issue or if it's something specific with my setup (if it's specific to my setup I may just end up returning this headset and buying something else).
Thanks again.

'This accessory is not made to work with iPhone'......PLEASE HELP

I keep getting a message pop up on my iPhone 3GS....asking me if I would like to turn on Airplane Mode to reduce audio interference?
I have recently received the iPhone as a replacement from iPhone as my old iPhone speakers were broken.
I have noticed a small red tape in the docking area of the phone...I understand this is a sign of water damage? Although the phone has been nowhere near water.......can I fix this without sending back to Apple again (as that takes quite a while)
Please help, thanks

macmfc wrote:
I have noticed a small red tape in the docking area of the phone...I understand this is a sign of water damage? Although the phone has been nowhere near water.......can I fix this without sending back to Apple again (as that takes quite a while)
In short, no you cannot fix the little red tape. It's been exposed to water/moisture somewhere.
As for your warning message: older iPod Touch/iPod accessories will trigger the message, so if you have had the accessory for some time, that may be part of your problem.
Try blowing compressed air into the charge port, as another possible issue is dust or lint in there.
Best to take it back to your service provider/Apple and have them replace it if the water sensors have been tripped. Unless you can prove it was like that when you got it (since it's a replacement), you will probably have to pay a replacement fee. Water damage is not covered under warranty.

Accessory is not made to Work withh iphone

On Friday I started receiving the above message. My iphone is not using any accessories whatsoever and I have not downloaded any new applications in weeks. When I get the message it asks if I want to put the phone is airplane mode.

Hi all
I started to have the same problem recently also... and I have not downloaded anything to my mac or iPhone that I am aware of to affect this simple docking/recharging/syncing procedure. I use a Universal Dock
See also my post http://discussions.apple.com/thread.jspa?threadID=2309644
Furthermore, there will be no 'dock in' chime meaning my phone "is forced to stay in silent mode" while in the Dock, killing sms tone and alarm. Phone ringing is working, and seems to be working off another audio source?
I have swap cables, Universal Docks (I've a few) and even connect the Dock and/or phone itself directly to the mac's USB port. But I have to "stress" that my Dock has been connected to a Belkin 7-port USB 2.0 powered hub for a long time and everything was fine.
I am not certain if at this point it has something to do with me upgrading to Snow Leopard, but from reading here, seems like it affects PCs too
Small not a "critical" problem, but annoying and irritating since everyday we dock in and out the phone
Cheers

This accessory is not made... error

Greeting folks,
My iPhone has been wacky! Out of nowhere it shut itself down whiel in the middle of a song. Then after I plugged it in for a while it finally came back on. However, now every few minutes or so the "This accessory is not made to work with iPhone" message comes up. The thing is, I have not been plugged into any accessory in weeks. And before you ask, yes I reset the phone.

Hey Jorva,
Try using a small brush, like a toothbrush, to remove any debris from the dock adapter.
What accessory did you have the iPhone plugged into? Did it have the "Works with iPhone" logo?
http://support.apple.com/kb/HT1665
If its not caused by debris, make a reservation to have a Mac Genius take a look at it.
http://www.apple.com/retail/
Jason

Iphone bluetooth charging cradle--not made to work with iphone??

About every 5 minutes, my iphone pops up with a note that "this accessory is not made to work with iphone", whenever it's in the charging cradle that came with the apple bluetooth earpiece. Anybody else see this? any idea what's up? I just love the inability to get direct communication with apple on the topic.

I have the same problem. The same pop-up comes up when I plug the iPhone into the cradle that comes with the Apple-branded iPhone bluetooth headpiece. It didn't use to have this problem before, and the iPhone used to recognize the headset as also charging when both were in the cradle. Now, the headset does not even charge up when the iPhone is in the cradle at the same time!! I think the latest iPhone firmware upgrade messed up everything!! HELP!!!!

Iphone 4 has no service after replacing screen and updating, phone company says sim is fine. any ideas? thanks

iphone 4 has no service after replacing screen and updating, phone company says sim is fine. any ideas? thanks

We had this happen with a ipad mini, took it back to person who worked on it, after a week with trying to get it working again, he replaced it. I will agree with the other replies take it back to repair place there must be something inside the phone that if you don't do repair excalty right it messes up all phone functions. Also I would give the repair person a time frame to either get it working or replace it.

Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?

Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?
Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?

Handoff Continuity Troubleshooting

After upgrading software on my iphone 5. I am not able to in app purchases. I have tried to turn of the restrictions and it is still not letting me make purchases.

After upgrading software on my iphone 5. I am not able to make in app purchases. I have tried to turn off restrictions and still not able to make in app purchases. Can anyone help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Error after 1.1.1 update. iPhone/dock says "Accessory is not made to work..

Similar Messages

Maybe you are looking for