Error after adding Child node

Hi Experts,
I have created a Data object by importing as "BAPI Wrapper" . It had a Parent node and a child node. Now i added one more child node.
But if i am activating this node it is giving below error.
Object not adequately specifiedError
Regards,
Abhishek

Hi Dhana,
I have deleted the child node and added these attributes in header so now i can activate this header structure but when i tried to activate BA after mapping , then it says
Invalid field mapping
But i have counter checked everything is fine even when i checked my BA with "Error check" button it didn`t give any error. Any idea how to sort it out.
Regards,
Abhishek

Similar Messages

  • Time Capsule gives MobileMe/Apple ID password error after adding Express

    I have a 1st Gen Time Capsule at the top of my network plugged into my cable modem.  I just purchased one of the new Airport Expresses to extned my network.
    I plugged the Airport Express in and used the iOS "Airport Utility" app to set it up.  The utility (both on the the iOS and on my Mac) show the new Airport Express with a green light and connected.  However, my Time Capsule now has a warning error with an orange light.
    On the iOS device, it says "Unrecognized Apple ID or password--An Apple ID or password is incorrect.  Enter the correct Apple ID and password and try again."  Of course, on the iOS, there's no way to enter it, so I went to the Mac's Airport Utility (I have both 5.6 and 6.0, but I used 5.6).  On the Mac's Airport Utility, the error says that the MobileMe member name or password is incorrect.  (Note, wireless continues to work--I just have the error).
    Since the Mac's utility asks to correct the MobileMe username/password, I type those in and let it update.  I know that I am typing the correct username/password, but the error continues to occur.  I could click "ignore this issue" on the iOS Airport Utility and all lights so green, but the issue shouldn't be there to begin with.  I'd like to figure out what is causing the error.  Is there another location that I should be entering the information?
    I do have a separate Apple ID, but it's asking for my MobileMe credentials (which migrated over to iCloud).
    It's bizarre that the NEW device has no errors and my wireless is still working.  But the original Time Capsule which was working fine with no errors, now has an error after adding the new device.

    Crazy, but attempting to fix the information in Airport Utility 6.0 worked fine--but it wouldn't work in AU 5.6.
    It does seem odd that I couldn't attempt to fix the username/password issue from within the iOS app to begin with.  It told me what the error was, but didn't seem to give me a place to edit the information.

  • "500 internal server error" after adding custom fields to Address page

    I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
    we also extended the Badi HRPAD00INFTYUI
    custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
    we get the following error:
    "500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
    "Area8" is one of the custom fields we added in PA0006 (Address infotype).
    any idea what is wrong?  maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
    T.

    Hi Sasu,
    Its clearly saying contect binding error. Have you mapped  correctly from FcComponent to VcComponents.
    FcCompoenets for Model logic.
    Check the mappings correctly.
    If it is complete custom or new field then there will be could of steps.
    1) Reimport the model
    2) map new field to FcComponent
    3) Bind new Fields from Fc to Vc
    Rgds
    -SS

  • CUA client doesn't know any profile/role anymore after adding child system

    Hi,
    I did set up a CUA client on our Solman system. The client is client 500 which has been copied over from 000 via the SAP_CUST profile.
    In this client 500 I did create some users with the SAP_ALL profile, so no problem here.
    After adding a child system to the CUA, it seems that if I want to create a new user in the CUA client 500 it doesn't know any role/profile anymore which is standard available in this client.
    In PFCG I can find a lot of standard roles, but when adding one via SU01 I do get the error that it doesn't exist. The same goes for the profile SAP_ALL.
    Just to be clear, adding profiles or roles from child systems is not a problem, just adding roles or profiles for the CUA client itself doesn't seems to work anymore.
    I had this problem on a 7.0 solman system and now also on a 7.01.
    Did anyone had the same problem?
    Thanks,
    Gregory

    Hello Georges,
    I have exactly the same issue.
    I have created a new CUA. I have copie 001 client to 333 client, using SAP_ALL profile.
    Now, from CUA client (333), I cannot add any roles or profiles to my user.
    I have created an RFC D1CCLNT333, but it does not resolved the problem.
    Did you do anything else to fix your issue ?
    Thanks
    Best regards
    CP2009

  • Usertable error after adding a udf

    I have a UI add-on that assigns values ​​to a UDT by usertable object of the DI API, the problem is generated after adding a UDF from SAP menu and try to assign a value from the DI. The error is Invalida Field Name
    My question is, is necessary to wait a while until SAP records the new field to be accessible by usertable?
    Any suggestions?
    oUserTable.UserFields.Fields.Item("U_" + colName).Value = respuesta;

    Hi Ricardo,
    As far as I know, you can use this field as soon as it is added to the usertable. But please make sure that this has been added successfully in your table and also make sure that ("U_" + colName ) is the same as it appears in SQL Server. Make sure that you are providing the right field name.
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

    I added a dataset to an existing report and broke an aggregation.  In the old (i.e. single dataset) report, this expression below worked fine.  I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
    = CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
    After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset".  Having done some research online, I found that I
    needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
    = CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
    Am I missing something?  Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me. 
    Thanks in advance!
    Brian

    I found the answer.  Apparently, my expression syntax was off.  This expression does the trick...
    = CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
    I just happened upon this particular syntax searching online.  I was trying to specify the dataset name after each .value, but I never got that to work.   This is the only time I have found this particular syntax online. 

  • Inconsistent results for adding child node in a JTree

    I have a JTree where I add child nodes when a user clicks on the node or handle. When the user clicks on the node, through implementing TreeSelectionListener interface, I add a node, the tree expands, and I see the newly added node. However, when the user clicks on the handle, through implementing the TreeExpansionListener, the tree does not expand and I do not see the newly added node. The problem is repeatable by compiling the code below.
    Why is there this difference? Aren't all the methods implemented through the TreeSelectionListener and TreeExpansionListener in the SWT thread?
    public class TestFrame extends JFrame implements TreeSelectionListener, TreeExpansionListener {
         public TestFrame() {
              String[] alphabets = {
                        "a", "b", "c", "d", "e", "f", "g",
                        "h", "i", "j", "k", "l", "m", "n",
                        "o", "p", "q", "r", "s", "t", "u",
                        "v", "w", "x", "y", "z"
              DefaultMutableTreeNode top = new DefaultMutableTreeNode("CEDICT");
              for(int i=0; i < alphabets.length; i++) {
                   DefaultMutableTreeNode node =
                        new DefaultMutableTreeNode(alphabets) {
                        public boolean isLeaf() { return false; }
                   top.add(node);
              JTree tree = new JTree(top);
              tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
              tree.addTreeSelectionListener(this);
              tree.addTreeExpansionListener(this);
              tree.setShowsRootHandles(true);
              JScrollPane treePane = new JScrollPane(tree);
              treePane.setHorizontalScrollBarPolicy(
                        JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
              treePane.setVerticalScrollBarPolicy(
                        JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
              treePane.setSize(new Dimension(200,400));
              treePane.setPreferredSize(new Dimension(200,400));
              getContentPane().setLayout(new BorderLayout());
              getContentPane().add(treePane, BorderLayout.CENTER);
              Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
              int inset = 50;
    setBounds(inset, inset,
    screenSize.width - inset*2,
    screenSize.height - inset*2);
              setLocationRelativeTo(null);
              setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              pack();
              show();
         public static void main(String[] args) {
              SwingUtilities.invokeLater(new Runnable() {
                   public void run() {
                        JFrame.setDefaultLookAndFeelDecorated(true);
                        TestFrame frame = new TestFrame();
         public void valueChanged(TreeSelectionEvent e) {
              JTree tree = (JTree)e.getSource();
              DefaultMutableTreeNode node =
                   (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
              System.out.println(node);
              Date date = new Date();
              node.add(new DefaultMutableTreeNode(date.toString()));
         public void treeCollapsed(TreeExpansionEvent event) {
              JTree tree = (JTree)event.getSource();
              TreePath path = event.getPath();
              DefaultMutableTreeNode node =
                   (DefaultMutableTreeNode) path.getLastPathComponent();
              System.out.println(node);
              Date date = new Date();
              node.add(new DefaultMutableTreeNode(date.toString()));
              tree.invalidate(); //does not help to show newly added child
         public void treeExpanded(TreeExpansionEvent event) {
              JTree tree = (JTree)event.getSource();
              TreePath path = event.getPath();
              DefaultMutableTreeNode node =
                   (DefaultMutableTreeNode) path.getLastPathComponent();
              System.out.println(node);
              Date date = new Date();
              node.add(new DefaultMutableTreeNode(date.toString()));
              tree.invalidate(); //does not help to show newly added child

    I couldn't figure out why inserting a node in the valueChanged(...) method works. In all three methods no listeners are notified about the change, so you would think all three would fail.
    For a JTree using the DefaultTreeModel the nodesWereInserted(...) method needs to be called. For example, if I change your last three methods to this
    public void valueChanged(TreeSelectionEvent e) {
       insertNode((JTree) e.getSource(),
                  (MutableTreeNode) e.getPath().getLastPathComponent());
    public void treeCollapsed(TreeExpansionEvent event) {
       insertNode((JTree) event.getSource(),
                  (MutableTreeNode) event.getPath().getLastPathComponent());
    public void treeExpanded(final TreeExpansionEvent event) {
       insertNode((JTree) event.getSource(),
                  (MutableTreeNode) event.getPath().getLastPathComponent());
    public void insertNode(JTree tree, MutableTreeNode parent) {
        Date date = new Date();
        MutableTreeNode child = new DefaultMutableTreeNode(date.toString());
        int index = parent.getChildCount();
        parent.insert(child,index);
        ((DefaultTreeModel) tree.getModel())
                .nodesWereInserted(parent,new int[]{index});
    }then it works as you desire. You can (and should) of course use the DefaultTreeModel's own insert method.
    DefaultTreeModel#insertNodeInto(MutableTreeNode,MutableTreeNode, int)

  • EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2

    Hi guys.
    We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
    Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
    Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
    We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
    However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
    This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
    This is not the first time that we have seen this behaviour.
    I have experienced it in one other environment, which I keep meaning to rebuild.
    These installations are in completely different environments.  The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
    The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
    It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
    However, this is now far too coincidental to be the case.
    Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
    I could really do with a quick win on this one.
    Thanks

    Hi,
    i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
    My system is different:
    Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
    and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
    The issue appears in the last months.
    It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
    I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
    I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
    Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
    Could you verify if on some machine the evdre works fine and and that when you delete the  added member evdre starts to work?
    Kind regards
    Roberto
    Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM

  • Expdp has errors after adding patches set?

    Hi there,
    After adding Oracle patches set and upgrade the database from 10.2.01 to 10.2.0.3, we got the following errors:
    UDE-00008: operation generated ORACLE error 31626
    ORA-31626: job does not exist
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
    ORA-06512: at "SYS.DBMS_DATAPUMP", line 2747
    ORA-39086: cannot retrieve job information
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
    ORA-06512: at "SYS.KUPV$FT_INT", line 1489
    ORA-12805: parallel query server died unexpectedly
    ORA-06512: at "SYS.DBMS_DATAPUMP", line 3712
    ORA-06512: at line 1
    Notes: expdp used to work in version 10.2.0.1.
    now it has errors above in version 10.2.0.3
    What should we do to fix it?
    Thanks,

    Check this metalink note:
    EXPDP CLIENT GETS UDE-00008 ORA-31626 ORA-39086
    Doc ID: NOTE:549781.1
    Despite of the error stack, expdp may be run successfully.
    Werner

  • Error after Adding Header Zfields to Item Level Screens?

    Hi,
    When I add SLA Z fields from Node BTAdminI to the  SRQM_SLAPRO/SLASrvCtrView,. Contract related SLA data is not appearing and all fields are appearing in the mode of grade out in WEB UI.
    Few of the fields are showing  BTAdminI not bound as value.
    In the same scenario for the few of the fields I am getting below mentioned error
    BSP exception: Error converting to data object from ZZAFLD00002U
    Same error I am getting after I added Zfields (From BTADMINH) to Item Level Screen too.
    My doubt is Cant I add Header Zfields to Item Level Screens? Or/And Item Zfields to Item Header Screens
    What can be possible what is not possible. Please get some clarity on this issue.
    Thanks
    Chand

    Hi All,
    I am new to IC WEB.
    i am facing a problem while ading Zfield in Contact Screen using AET Tool.
    i am getting the error as
    BSP exception: Error converting to data object from ZZAFLD00001K
    Please help me....
    Thanks in Advance,
    Swaraj
    Edited by: swaraj sap on Oct 6, 2009 7:08 PM

  • Encounter error after adding an attribute to a new dimension in AWM.

    After I added an attribute to a new dimension, I encountered the error as below.
    I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
    Please kindly help!!
    BI Beans Diagnostics(v1.0.2.0) 2005/9/15
    ===============================================================================
    JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
    JAVA_HOME ................................. = c:\j2sdk1.4.2_02
    JDeveloper version ........................ = 10.1.2.0.0.1811
    BI Beans release description .............. = BI Beans 10.1.2 Production Release
    BI Beans component number ................. = 10.1.2.52.0
    BI Beans internal version ................. = 3.2.1.0.13
    Connect to database ....................... = Successful
    JDBC driver version ....................... = 10.1.0.3.0
    JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
    Database version .......................... = 10.2.0.1.0
    OLAP Catalog version ...................... = 10.2.0.1.0
    OLAP AW Engine version .................... = 10.2.0.1.0
    OLAP API Server version ................... = 10.2.0.1.0
    BI Beans Catalog version .................. = N/A; not installed in BI_TEST
    OLAP API JAR file version ................. = "10.1.0.2.0"
    OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
    Load OLAP API metadata .................... = Successful
    java.lang.NullPointerException
    at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
    pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
    at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
    pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
    at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
    pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
    at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
    pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
    at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
    pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

    I would post this on the OLAP forum as they should be able to help you diagnose this problem. The OLAP forum can be found at the following link:
    OLAP
    There is not much detail in your log, but I suspect that your OLAP mappings are incomplete or the maintenance of your dimension to load the new attribute data somehow failed. I would check the OLAP AWM build logs for more information.
    Thanks
    Keith
    Oracle Business Intelligence Product Management
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    BI Beans http://www.oracle.com/technology/products/bib/index.html
    Discoverer: http://www.oracle.com/technology/products/discoverer/
    BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
    Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
    BI Samples: http://www.oracle.com/technology/products/bi/samples/
    Blog: http://oraclebi.blogspot.com/

  • Severe Error while adding a node to clusterware

    Hi all,
    I've successfully implemented RAC 11gR2 on two nodes, node1 and node2( Windows Server 2008 Enterprise R2). Now I'm trying to add a third node to it. But when I tried to implement it using the below steps:
    1. Installed the same OS as of the existing RAC (Windows Server Enterprise 2008 R2).
    2. Successfully executed cluvfy stage -post hwos -n node1,node2,node3
    3. Successfully executed cluvfy stage -pre nodeadd -n node3
    3. When I tried to execute "CLUSTER_NEW_NODES={node3}" "CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}", I got the following error message:
    "Number of new nodes being added are not equal to the number of new virtual nodes"
    Please help me solve this issue.
    Regards
    ORA_QUEST
    Edited by: ORA_QUEST on Aug 4, 2011 12:31 PM
    Edited by: ORA_QUEST on Aug 4, 2011 1:56 PM

    The following link has the similar error that you are facing and its solution,
    http://martincarstenbach.wordpress.com/2009/10/12/build-your-own-rac-system-part-iv-extending-grid-infrastructure/
    For better response, post in RAC thread,
    Real Application Clusters

  • SRDemo in tomcat 5.5.x got ERROR after added data bindings

    hi all,
    it is success to deploy the project into tomcat 5.5.x, and it works fine when no data bindings added into jspx.
    after i added a data bindings,
    it works find at embed OC4J, but not in tomcat 5.5.x
    and tomcat comes this error:
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: javax.naming.NameNotFoundException, msg=Name SRPublicFacade is not bound in this Context
    how can i bound the SRPublicFacade into tomcat5.5.x ?
    Many Thanks!
    Best Regards,
    S. H. Wong
    Edited by: user9218028 on Apr 13, 2012 10:04 PM
    Edited by: user9218028 on Apr 13, 2012 10:09 PM
    Edited by: user9218028 on Apr 13, 2012 10:13 PM
    Edited by: user9218028 on Apr 13, 2012 10:14 PM

    Please help,
    Many Thanks.
    Best Regards
    Wong Sai Ho

  • WEBI Report Error After Adding 2 New Servers to BOE

    There were two new servers added to the existing BO enterprise application. Both these servers have the Web Intelligence job server and Web Intelligence report server services running on them. Eversince these servers have been added we have been encountering the following error
    Creation Time: 1/11/2009 11:40 PM
    Start Time: 1/11/2009 11:40 PM
    End Time: 1/11/2009 11:40 PM
    Server Used: LXW0D38C.Web_IntelligenceJobServer
    Error Message: 0: (CS) :DBDriver failed to load : D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\dataAccess\connectionServer\dbd_oci8.dll (The specified module could not be found. ) An internal error occurred while calling the 'processDPCommands' API. (Error: WIS 30270) BOException caught:RESULT=80004005;WHAT=RefreshBatch failed
    The job server mentioned in error message may not necessarily be job server created on the new servers. In the above example the server listed with the job server running on it has BOE installed on the C drive
    I do want to point out that when I turn off the job servers and report servers on the newly installed machines this problem goes away
    I am assuming that an old job server may assign a task the the new webi intelligence report server to execute a query and the problem shows up
    Am I possibly missing a setting in the WEB Intelligence report server?
    Is there something that can be done to fix the issue?
    We are currently at BOXIR2 SP3.6 which is installed on Windows 2000 Server with SP4
    Thank You
    Shariq

    Alan,
    I used remote desktop to access each of the servers and I am able connect to the oracle databases that the BOW accesses from both SQLPLUS as well as ODBC. I also opened up designer and was able to successfully connect to each of the universes
    I have placed the -trace option on the WEB Intelligence Report servers and going to try to find what kind of output this newly installed BOE software generates
    Can you think of anything else?
    Thank You
    Shariq

  • Serialization Error after adding a new field to BPM Process

    Hi,
    I have a BPM Process to which I added a new attribute userid and consuming the BPM process in a web dynpro application, I created a model using the BPM Process's Web Service but getting a serialization error that the model does not have a mandatory field with name [userid]. see below.
    FYI.. I can trigger my BPM process through the Web Service in wsnavigator , the error I am getting is while executing the BPM Process from the custom webdynpro.
    Any idea how to resolve the issue?
    XML Serialization Error. GenericObject [
    <modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
    ] does not have a mandatory field with name [userid].
    [EXCEPTION]
    com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. GenericObject [
    <modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
    ] does not have a mandatory field with name [userid].
    at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFieldContent(SerializationUtil.java:1546)
    at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFields(SerializationUtil.java:1431)
    at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericType(SerializationUtil.java:1383)
    at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.serialize(GeneratedComplexType.java:168)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeParameter(SOAPTransportBinding.java:1731)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeRequest(SOAPTransportBinding.java:1683)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.writeSOAPRequestMessage(SOAPTransportBinding.java:254)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1272)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:952)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:907)
    at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76)
    at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73)
    at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClassExecutable.execute(WSTypedModelClassExecutable.java:49)
    at com.sap.demo.wdpoc.wd.comp.wdpoc.Wdpoc.execute(Wdpoc.java:257)

    This question is not answered but I am marking it answered because I have to post more.
    Sorry
    -Ashwani

Maybe you are looking for