Error after Adding Header Zfields to Item Level Screens?

Hi,
When I add SLA Z fields from Node BTAdminI to the SRQM_SLAPRO/SLASrvCtrView,. Contract related SLA data is not appearing and all fields are appearing in the mode of grade out in WEB UI.
Few of the fields are showing BTAdminI not bound as value.
In the same scenario for the few of the fields I am getting below mentioned error
BSP exception: Error converting to data object from ZZAFLD00002U
Same error I am getting after I added Zfields (From BTADMINH) to Item Level Screen too.
My doubt is Cant I add Header Zfields to Item Level Screens? Or/And Item Zfields to Item Header Screens
What can be possible what is not possible. Please get some clarity on this issue.
Thanks
Chand

Hi All,
I am new to IC WEB.
i am facing a problem while ading Zfield in Contact Screen using AET Tool.
i am getting the error as
BSP exception: Error converting to data object from ZZAFLD00001K
Please help me....
Thanks in Advance,
Swaraj
Edited by: swaraj sap on Oct 6, 2009 7:08 PM

Similar Messages

Time Capsule gives MobileMe/Apple ID password error after adding Express

I have a 1st Gen Time Capsule at the top of my network plugged into my cable modem. I just purchased one of the new Airport Expresses to extned my network.
I plugged the Airport Express in and used the iOS "Airport Utility" app to set it up. The utility (both on the the iOS and on my Mac) show the new Airport Express with a green light and connected. However, my Time Capsule now has a warning error with an orange light.
On the iOS device, it says "Unrecognized Apple ID or password--An Apple ID or password is incorrect. Enter the correct Apple ID and password and try again." Of course, on the iOS, there's no way to enter it, so I went to the Mac's Airport Utility (I have both 5.6 and 6.0, but I used 5.6). On the Mac's Airport Utility, the error says that the MobileMe member name or password is incorrect. (Note, wireless continues to work--I just have the error).
Since the Mac's utility asks to correct the MobileMe username/password, I type those in and let it update. I know that I am typing the correct username/password, but the error continues to occur. I could click "ignore this issue" on the iOS Airport Utility and all lights so green, but the issue shouldn't be there to begin with. I'd like to figure out what is causing the error. Is there another location that I should be entering the information?
I do have a separate Apple ID, but it's asking for my MobileMe credentials (which migrated over to iCloud).
It's bizarre that the NEW device has no errors and my wireless is still working. But the original Time Capsule which was working fine with no errors, now has an error after adding the new device.

Crazy, but attempting to fix the information in Airport Utility 6.0 worked fine--but it wouldn't work in AU 5.6.
It does seem odd that I couldn't attempt to fix the username/password issue from within the iOS app to begin with. It told me what the error was, but didn't seem to give me a place to edit the information.

When I try to setup my iCloud, after adding my AppleID & password, the next screen is the EULA (with an Agree and a Disagree button) - I press Agree - Nothing happens. It appears to freeze.

When I try to setup my iCloud, after adding my AppleID & password, the next screen is the EULA (with an Agree and a Disagree button) - I press Agree - Nothing happens. It appears to freeze. This phone was previously owned and the last owner's apple id is what defaults... I do not know the last owner's password. - I just want to get rid of that person's iCloud in order to create my own with my own account.

With iOS 7 you will not be able to delete the iCloud account without providing the password for the iCloud ID. If it is the previous owner's account, you will need to have them remove it from their ID as mentioned in this article: http://support.apple.com/kb/TS4515.

Error message in the IDOC at item level

Hi,
Iam working on IDOC.when idoc failed i get the that idoc error message and displaying in the report at header level.But my requirement is to diplay the error messages at the item level.Is it possible to display the error messages at the item level?For example for IDoc number is 30000045.For this idoc number 7 line items is there like 1000,1001,1002,1003,1004,1005,1006,1007.i want error message line item wise.Kindly suggest me.
Regards,
Sujan

hi sivaprasath,
write the custme code as per your requirement so that it will do..user exit or badi .
~linganna

Usertable error after adding a udf

I have a UI add-on that assigns values to a UDT by usertable object of the DI API, the problem is generated after adding a UDF from SAP menu and try to assign a value from the DI. The error is Invalida Field Name
My question is, is necessary to wait a while until SAP records the new field to be accessible by usertable?
Any suggestions?
oUserTable.UserFields.Fields.Item("U_" + colName).Value = respuesta;

Hi Ricardo,
As far as I know, you can use this field as soon as it is added to the usertable. But please make sure that this has been added successfully in your table and also make sure that ("U_" + colName ) is the same as it appears in SQL Server. Make sure that you are providing the right field name.
Hope it helps.
Thanks & Regards
Ankit Chauhan

EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2

Hi guys.
We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
This is not the first time that we have seen this behaviour.
I have experienced it in one other environment, which I keep meaning to rebuild.
These installations are in completely different environments. The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
However, this is now far too coincidental to be the case.
Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
I could really do with a quick win on this one.
Thanks

Hi,
i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
My system is different:
Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
The issue appears in the last months.
It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
Could you verify if on some machine the evdre works fine and and that when you delete the added member evdre starts to work?
Kind regards
Roberto
Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM

Adding a column at item level while creating PO using ME21N

Hi,
My requirement is to add new column in Item overview of PO at the time of creation. Same should be displayed in ME22N and ME23N.
I tried doing same using BADI ME_PROCESS_PO_CUST using interface PROCESS_ITEM after adding field QSSYS in EKPO table.
I have also tried exit MM06E005 / EXIT_SAPMM06E_013.
Kindly let me know steps.
Thanks & Regards,
Vidhi

Hi Vidhi,
I think you can not add new column in standard one. Create a custom tab at item level and use that.
[Me21n Tab|http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29]
Regards,
Madhu.

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

Display Header data to item level in me21n

Dear Friends ,
I have the requirement that Incoterm field in me21n at header level while creating purchase order needs to get reflected at item level too. Currently it is blank (at item level).
Is it the development or Customisation?
Can anybody please explain me how to go abt it?

If you enter an Incoterm on header level, this is valid for all items that do not explicitly have an Incoterm.
If you then enter an Incoterm on item level, this overwrites the Incoterm entered on header level.
So it's not clear why this requirement has come up.
http://help.sap.com/saphelp_srm50/helpdata/en/0c/b91b3f7f9e3642e10000000a114084/content.htm

Workflow - Header vs. Item level

Hello,
I am looking for some documentation / list of pros and cons of implementing header level workflow vs. item level. I understand that item level is more difficult to implement, but what are the benefits.
We are looking at two types of approval, financial approval and commodity based approval and I would like to understand more before making a decision.
Many thanks,
AR

Hi,
For your requirement,you can go for N step HEader level SC Approval Workflow.I have worked on a similar reqt and the agent determintation can be made flexible based on runtime values thorugh the BADi BBP_WFL_APPROV_BADI.
Advantages of header level WF is that its very flexible.Disadvantage is that some techincal problems require application of OSS notes e.g graphical Preview inconsistent.
I have not worked on Item level WF so cant comment on that.For more info ,pls refer the foll links:
http://help.sap.com/saphelp_srm50/helpdata/en/17/40a86c773d6c41801d78af1a34b90f/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/a3/a6a34098022a54e10000000a1550b0/content.htm
Useful Workflow links ->
SRM Business Workflow
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
Setting Up SAP Business Workflow
http://help.sap.com/saphelp_srm50/helpdata/en/ee/277e3c281f1817e10000000a114084/frameset.htm
Related links:
Re: SRM workflow doubts....
Triggering SRM workflow from a web-based form (HTML)
Workflow debugging
Re: Triggering an alert
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Expdp has errors after adding patches set?

Hi there,
After adding Oracle patches set and upgrade the database from 10.2.01 to 10.2.0.3, we got the following errors:
UDE-00008: operation generated ORACLE error 31626
ORA-31626: job does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2747
ORA-39086: cannot retrieve job information
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.KUPV$FT_INT", line 1489
ORA-12805: parallel query server died unexpectedly
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3712
ORA-06512: at line 1
Notes: expdp used to work in version 10.2.0.1.
now it has errors above in version 10.2.0.3
What should we do to fix it?
Thanks,

Check this metalink note:
EXPDP CLIENT GETS UDE-00008 ORA-31626 ORA-39086
Doc ID: NOTE:549781.1
Despite of the error stack, expdp may be run successfully.
Werner

Updating Ekpo by adding item level Screen Exit

Hi,
I added 2 fields at the item level of the ME21N Screen using the following screen exit.
( SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item. )
Now I just want to update EKPO table.,. How to proceed. any body know guide me.
Thanks & Regards.
Balajee.J

Hi Mou,
In this there are four methods
1)ACTIVATE_TAB_PAGE
2)TRANSFER_DATA_TO_SUBSCREEN
3)TRANSFER_DATA_FROM_SUBSCREEN
4)PASS_FCODE_TO_SUBSCREEN
In thw first method pass the tabname,screen no,position all.
fcaption = 'C Form Details'.
fprogram = 'Z_VLO1N_HEAD'.
fdynpro = '0200'. This is the screen created and kept all custom fields
Here you the concept set and get data and move and get the values.
TRANSFER_DATA_TO_SUBSCREEN
set PARAMETER ID 'Z' FIELD f_vbrk-ZCF.
TRANSFER_DATA_FROM_SUBSCREEN
get PARAMETER ID 'Z' FIELD fvbrk-ZCF.
Pass all these parameters it will resolve your issue.Check and post if need help.
Regards,
Madhu.

Adding new fields in Item details screen in VA01 tcode

Hi all,
My requirement is to add custom fields in 'Additional Data B' tab of VA01 transaction.
That is, after entering the material and quantity, if i double click tat material, it goes to item details screen. In taht, 'Additional data B' tab is there with no fields.
Now i want to add fields in that.. Is it possible?
Is there any exit for adding custom fields under that tab?
Pls tell me the procedure..
Regards,
Shanthi

The process for Additional Data B, whether header or item level, is simple...
First, add the data elements to VBAK (header) or VBAP (item), in a customizing append. The accepted practice is to name your fields beginning ZZ, with the appropriate or custom data element/domain.
Then on Additional Data B screens, already named in this thread, create whatever is needed. For instance, you might want to add a subscreen that contains a group of fields with the DDIC-specific captions.
If you simply need a field, you can place the field (like VBAK-ZZMYFIELD). SAP will then manage updates to the database for you....no need to do anything to see that the data gets copied into the tables.
In one instance, I saw a pushbutton added that resulted in calls to screens with table controls, etc., essentially an entire subsystem called by pressing that button....

Error after adding Child node

Hi Experts,
I have created a Data object by importing as "BAPI Wrapper" . It had a Parent node and a child node. Now i added one more child node.
But if i am activating this node it is giving below error.
Object not adequately specifiedError
Regards,
Abhishek

Hi Dhana,
I have deleted the child node and added these attributes in header so now i can activate this header structure but when i tried to activate BA after mapping , then it says
Invalid field mapping
But i have counter checked everything is fine even when i checked my BA with "Error check" button it didn`t give any error. Any idea how to sort it out.
Regards,
Abhishek

Encounter error after adding an attribute to a new dimension in AWM.

After I added an attribute to a new dimension, I encountered the error as below.
I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
Please kindly help!!
BI Beans Diagnostics(v1.0.2.0) 2005/9/15
===============================================================================
JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
JAVA_HOME ................................. = c:\j2sdk1.4.2_02
JDeveloper version ........................ = 10.1.2.0.0.1811
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.52.0
BI Beans internal version ................. = 3.2.1.0.13
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.3.0
JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
Database version .......................... = 10.2.0.1.0
OLAP Catalog version ...................... = 10.2.0.1.0
OLAP AW Engine version .................... = 10.2.0.1.0
OLAP API Server version ................... = 10.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in BI_TEST
OLAP API JAR file version ................. = "10.1.0.2.0"
OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
Load OLAP API metadata .................... = Successful
java.lang.NullPointerException
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

I would post this on the OLAP forum as they should be able to help you diagnose this problem. The OLAP forum can be found at the following link:
OLAP
There is not much detail in your log, but I suspect that your OLAP mappings are incomplete or the maintenance of your dimension to load the new attribute data somehow failed. I would check the OLAP AWM build logs for more information.
Thanks
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Error after Adding Header Zfields to Item Level Screens?

Similar Messages

Maybe you are looking for