Error after approve leave

Hi,
I am facing issue whereby user created leave via Self Service and manager approved the leave. However SYSADMIN receives the below error notification:
"The approval process for 'requestor' has halted and will be delayed until the approval chain from 'requestor' is fixed. There is a problem in checking if 'approver' is the final approver"
Has anyone encountered this error before? Appreciate advise on this.
Thanks and Regards,
SC

hi,
check the Infotype 105 subtype 0001 in Transaction PA30 for the Personnel no.
Regards,
Boobalan.

Similar Messages

  • Error while approving Leave request from UWL

    Hi Experts,
    We are getting following error while manager clicks on Universal Worklist to approve Leave Request. On system we have assigned ess id to employee no. 43 in IT 105-0001 but it gives error message about employee no. 167 which has nothing to do with this leave request.
    Please go through following ST22 error log..
    Short text of the error message:
    "No data exists in this period for infotype 0105 and employee 00000167."
    Trigger Location of Runtime Error
        Program                                 SAPLPT_ARQ_REQUEST_U
        Include                                 LPT_ARQ_REQUEST_UIAF
        Row                                     186
        Module type                             (FORM)
        Module Name                             DUMP_IF_ERRORS
    Source Code Extract
    Line  SourceCde
      156   ENDCASE.
      157
      158   IF lock_indicator = 'X'.    "ANK Note962342
      159     status_ui = c_req_sent.
      160     status_ui_text = 'gesendet'(s04).
      161   endif.                      "ANK Note962342
      162
      163 ENDFORM.                    " set_request_status_ui_text
      164
      165 &----
      166 *&      Form  dump_if_errors
      167 &----
      168 *       text
      169 ----
      170 *      -->MESSAGES   text
      171 ----
      172 FORM dump_if_errors
      173   USING
      174     messages   TYPE ptarq_uia_messages_tab.
      175
      176   FIELD-SYMBOLS:
      177     <message>  TYPE bapiret2.
      178
      179   LOOP AT messages ASSIGNING <message>.
      180     IF <message>-type EQ c_message_error.
      181
      182 *Note 1168656 begin
      183 *      MESSAGE x999(53) WITH
      184 *     <message>-message
      185 *     <message>-type.                                        "#EC *
    >>>>>       MESSAGE <message>-message type 'X'.
      187 *Note 1168656 end
      188     ELSEIF <message>-type EQ c_message_abend.
      189 *Note 1168656 begin
      190 *      MESSAGE a999(53) WITH
      191 *      <message>-message
      192 *      <message>-type.                                       "#EC *
      193       MESSAGE <message>-message type 'A'.
      194 *Note 1168656 end
    195
    196     ENDIF.
    197   ENDLOOP.
    198
    199
    200 ENDFORM.                    " check_errors
    201
    202 *&----
    203 *&      Form  prepare_customizing_attibs
    204 *&----
    205 *       text
    Would really appreciate kind guidance to resolve the same.
    Thanks.
    Aashish

    Hi Ashish,
    Short text of the error message:
    "No data exists in this period for infotype 0105 and employee 00000167
    This clearly suggests that the employee data is not up to date.
    Go to Tcode : PC00_M40_CLSTR
    here 40 is the country coding or the Molga value for India. Like wise which ever country you work for, enter the country code there instead of 40.
    Enter the pernr as 00000167 and you would find till which date the payroll for 167 has been run successfully.It has to be in green color.
    If the payroll is not run till the period in which you are getting the error ( which obvisouly is what the error means) try running the payroll by going to the Tcode : PC00_M40_CALC or you can ask your HR team to run this payroll for you and you are good to go.
    Good Luck!
    Sandeep Tudumu

  • 500 internal error while approving leave request

    Hi All,
    One of my user when trying to approve leave request, he is getting the following error. it was working previously but suddenly thsi error has come
    500 internal server error
    Application error occurred during request processing
    Details: com.sap.tc.webdynpro.services.sal.core.Dispatcher exception: The requested deployable object 'sap.com/ess~lea' and application 'leaverequestapprove' are not deployed
    Can anyone advise on this error please!!!
    Thanks!
    Swarnaprakash

    Dear Swarnaprakash,
    Hope you are doing good.
    Do make sure that all ESS related applications/services are running.
    Please try to restart the applications this way:
    1. start the telnet admin tool
       telnet <hostname> 5<instnum>08
    2. logon using the J2EE Admnistrator user
    3. lsc (to list the available servernodes)
    4. jump <servernode> (usually jump 0)
    5. add deploy
    6. start_app -all
    Please have a look at the below for more information:
    [http://wiki.sdn.sap.com/wiki/display/TechTSG/(JSTSG)(Telnet)DeployController+Commands]
    and
    [http://help.sap.com/saphelp_nwpi711/helpdata/en/45/0ad8e787652d6ae10000000a11466f/frameset.htm]
    If the issue still persists, please check if all the SDAs have been deployed for ESS (SCA->SAP ESS and Business packages)
    Thank you and have a nice day :).
    Kind Regards,
    Hemanth

  • Critical error while approving leave

    Hi
    In portal while approving leave i am getting the follwoing error .
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
       The running application consciously caused an abort with short dump., error key: RFC_ERROR_SYSTEM_FAILURE   
    This error is comming only for few employees not for every one.
    Can anybody please let me know the solution for this .
    Thanks and Regards.

    Hi,
    First of all, check the short dump in transaction ST22, you probably find there much more details of the problem.
    secondly, make sure that these users have enough authorisations (do a trace) in backend. They might be missing some RFC call related authoritsation.
    Regards,
    Karri

  • Mulitple lined S/C gone into error after approval

    Hello I hope someone can help (sorry Im not technical I am still learning lol)
    We have recently patched our system for the first time since go live and I have come across a problem that I cannot seem to find a solution too.
    We have SRM 5 5.5 version and are up to patch note 16 and I am looking for a fix for the following error.
    When a shopping cart is raised over multiple lines but different Vendors are used, after approval it splits into several PO's as normal.  However, since the patching we have found that after  approval some of the PO's 'Order Status' states it is still awaiting approval even though it has been approved as one shopping cart but the other PO's are fine.  Below is an example that was raised on the same Shopping cart and have all been approved at the same time but some are showing as approved and some are not onl;y on the status and you cannot confirm etc -
      Number              Name  Purch.              Purch. Group                  Total Val.                       Status   
      3500006321      Split PO test 2 MG       P12 Shared                     15.00   GBP                   Awaiting Approval    
      3500006318      Split PO test 2 MG       P12 Shared                     150.00   GBP                 Awaiting Approval    
      3500006317      Split PO test 2 MG       P12 Shared                     20.00   GBP                   Awaiting Approval    
      3500006316      Split PO test 2 MG       P12 Shared                     30.00   GBP                   Awaiting Approval    
      3500006319      Split PO test 2 MG       P12 Shared                     750.00   GBP                 Ordered    
      3500006320      Split PO test 2 MG       P12 Shared                     2.50   GBP                     Ordered    
    Does anyone know of any notes to fix this as I have searched and have had no joy.
    Look forward to your advice and thank you in advance.
    Kind regards
    Michelle

    I also happened to catch the stack below in the debugger.  I've seen it a few different times and it may be related.  Looks like it's the op.textScrap that's null in my case.  Not clear on what leads to it.  It actually looks like it may be a bug in RichEditableText in the Flex SDK instead of something in TLF.
    Brent
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at spark.components::RichEditableText/handlePasteOperation()[RichEditableText.as]
        at spark.components::RichEditableText/textContainerManager_flowOperationEndHandler()[RichEdi tableText.as]
        at flash.events::EventDispatcher/dispatchEventFunction()
        at flash.events::EventDispatcher/dispatchEvent()
        at flashx.textLayout.container::TextContainerManager/dispatchEvent()[TextContainerManager.as ]
        at flash.events::EventDispatcher/dispatchEventFunction()
        at flash.events::EventDispatcher/dispatchEvent()
        at flashx.textLayout.elements::TextFlow/dispatchEvent()[TextFlow.as]
        at flashx.textLayout.edit::EditManager/doInternal()[EditManager.as]
        at flashx.textLayout.edit::EditManager/doOperation()[EditManager.as]
        at flashx.textLayout.edit::EditManager/pasteTextScrap()[EditManager.as]
        at flashx.textLayout.edit::EditManager/editHandler()[EditManager.as]
        at flashx.textLayout.container::ContainerController/editHandler()[ContainerController.as]
        at flashx.textLayout.container::TextContainerManager/editHandler()[TextContainerManager.as]

  • UWL Filter causing error while approving Leave Request

    Hi Guys,
    We recently applied MSS SP17 and we changed our UWL filter BADI to SWK1 Function group - SWK_LOCAL_INBOX_GET.
    The filter works fine, but when we try to approve leave request, it somehow calls this piece of code again and does not allow (DUMPS) BADI to set the filter saying - this field is not modifiable.
    Has anybody seen this before. Can anybody let me know how to resolve the issue?
    Regards,
    SC

    We added a code that if leave request calls this code...skip it.

  • Error while approving Leave request

    Hi,
    I am facing an issue while approving the attendance request of an employee via MSS. The error message comes for the leave request further in the queue.
    Error Message : No read authorization for infotype 2001/5006(Annual Leave) for employee number between 07.06.2010 and 07.06.2010
    Hoping for the early response.
    Thanks!

    I guess there is problem with the managers ID and the authorizations.
    Try to check in SU53 and speak to security team to run the trace and provide the necessary authorizations

  • Internal Server error while approving leave in absence management

    hi
    In my project absence mgt is applicable for Netherland employees. When an NL manager applies leave and his manager from puerto rico tries to approve it from UWL , the manager is getting the following ERROR on clicking on the leave request in his inbox task.
    500   Internal Server Error   Web Dynpro Container/SAP J2EE Engine/6.40 
    Failed to process request. Please contact your system administrator.
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException:
        at com.sap.xss.hr.lea.form.edit.VcFormEdit.setReadOnlyApprover(VcFormEdit.java:467)
        at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:269)
        at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:700)
        at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
        at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:158)
        ... 37 more
    This UWL error in Leave approval workflow is coming ONLY when PR manager is trying to NL employee's leave .
    All other country managers ( US , CH , FR etc) are able to approve the leave without any issue.
    We are using the standard leave approval workflow.
    ANY SOLUTIONS Plzz???

    Hello
    The above issue can occur if the rule group , to which this employee belongs, the leave type is not configured correctly. Please check the view V_T556A_WEB. The leave type and the rule group need to be defined here .
    Also make sure that the counting rule for the leave type is also  define correctly in T556C. Once the leave type for the approver  which belongs to the rule group has been correctly configured, way it has been done for normal employees, there will not be any issue.
    Kindly complete the necessary customizing  and check your results.
    Thanks and kind Regards
    Ramana

  • Reg : Getting error while approving leave request

    Hello Experts,
    Manger is getting and error message u2018Work item 000000000000 cannot be readu2019 while
    Approving the leave request of one his reportee. This error is triggering for only one
    Reportee. 
    Experts please kindly help us.
    Regards,
    Raj

    Hi Raj,
    There are a number of issues that could cause this.  Can you share your scenario (where is manager approving the request - via SAPGUI, ESS, MSS?)  Are you using an SAP standard workflow?
    Plus, there are lots of threads in SCN on this topic.  Have you checked any of these?
    Good luck,
    Sue

  • MSS - Error while approving leave request

    Hi,
    I am facing an issue while approving the attendance request of an employee via MSS. The error message comes for the leave request further in the queue.
    Error Message : No read authorization for infotype 2001/5006(Annual Leave) for employee number between 07.06.2010 and 07.06.2010
    Hoping for the early response.
    Thanks!
    Edited by: Abhijit Chitale on Jun 2, 2010 6:52 AM
    Edited by: Abhijit Chitale on Jun 2, 2010 6:53 AM

    Hi,
    This is an authorization issue which needs to be adjust in the ERP system. Please ask your basis administrator to help you. The authorization object is: P_ORGIN

  • Authorisation error while approving leave

    We have ESS in place.
    while approving a leave request , which has been created by requestor changing an alreqady posted absence of type loss of pay , the Manager is getting the following error:
    No read authorization for infotype 2001/0402 for pers no 40000141 between 27.04.2010 and 27.04.2010
    No read authorization for infotype 2006/90 for pers no 40000141 between 01.04.2010 and 31.03.2010
    No read authorization for infotype 2006/91 for pers no 40000141 between 01.04.2010 and 31.03.2010
    No read authorization for infotype 2006/92 for pers no 40000141 between 01.04.2010 and 31.03.2010
    this error does not come while approving normal leave request , coming for requests which has been created by changing a posted leave.

    try to execute PTARQ in the backend and check it
    Thanks
    Bala Duvvuri

  • Error after approving the Appraisal.

    Dear Friends,
    After HR's approval (final approval) appraisal rating is not saving in the core hr system, insted system is throwing following error:
    "Your Appraisal performed on Ali, Asif has encountered the following Application Error:
    Can anybody help me out in resolving this issue..
    Regards,
    Jithin

    Jithin,
    Could you specifiy the error you got?
    Was it something like 'ORA-20001: The performance rating which was entered is invalid'?

  • Help on Discount after Approval Procedures

    Hi Experts,
    Our customer is reporting an error after approval process that some documents has discount after the approval procedure.
    Our customer insist that there are no discount when they approved the PO/ or Ap invoice but after approval, the originator can no longer add the documnts due to discounts.
    Is there anybody experience the same problems with thier system.
    I cannot report this since I cannot simulate the error
    We are using 2007B Pl15
    Regards,
    Sandra

    HI Sandra,
    I agree with Gordon, I faced similar issues with the discount field but not with approval process though.
    This happens when Quantity and unit price of an item are entered and the line total gets populated automatically after this if the user changes the line total without deleting unit price or quantity the discount field gets populated according to the change in the line total, please check if the end user is doing any of this.....or similar changes in these lines.....
    regards,
    Murali

  • ARM approval error after upgrading to SP14: Database error while using the secure store.

    Dear GRC experts,
    After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
    Here is the scenario; your advice will be appreciated.
    Task: Manually assign passwords to multiple systems contained in the request
    Where: On the access request, go to “User System Details” tab
    Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
    Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
    This is the failed approval of the request:
    Other scenarios executed as a workaround, and passed the password assignment this time:
    The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
    password.
    ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
    request. The GRC admin can approve once reached for system approval.
    AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
    System information:
      -Netweaver 7
      -GRCFND_A SP14
      -GRCPINW SP13
    Regards,
    Gustavo

    SAP just delivered a note to fix this issue. The number is 2022294.

  • Error in approve the leave request in MSS

    Hello,
    i m new in ESS/MSS.. right now working on maintanance project...All configuration settings are done by other guy. -
    I m facing error in approving the leave request in MSS .. it open a error page as of no page found ... can any body tell me the solution of this problem.
    thankz and regards,
    Sumit

    Hi,
    Sumit Malhotra ,
    Can you check with other user who is having all the roles.
    This error has something to do with the roles.navigation is occuring with URL means check the roles or try with other user.
    Look into permissions and also in different browser also.
    Log file u have to search in OS LEVEL.
    Mail meto [email protected] if it doesn,t work and we can try for other ways.
    Sorry if it doesn't work.
    Thanks,
    Gopal.sattiraju

Maybe you are looking for