Error after connect iPad to Windows

Hello, on Windows Vista Ultimate SP2 RU I open Itunes 10.3.1.55, after I connect iPad 4.3.3 (8J3), and I not see the iPad on Itunes, but I read an error popup, can you consult? Thank you!
screanshot:
http://img-fotki.yandex.ru/get/5606/ournet-biz.74/0_62558_221c26db_orig
http://img-fotki.yandex.ru/get/5408/ournet-biz.74/0_62559_6d779f82_orig

Today, I see report:
product
MobileDeviceService
problem
outage
date
01.07.2011 2:08
state
report sent
problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceService.exe
Application Version: 17.66.0.47
Application Timestamp: 4d4d9ef9
The name of the module with the error: kernel32.dll
Version of the module with the error: 6.0.6002.18005
The timestamp of the module with the error: 49e037dd
Exception Code: c06d007e
Exception Offset: 0003fbae
OS Version: 6.0.6002.2.2.0.256.1
Language Code: 1049
Additional Information 1: 8150
Additional Information 2: a3a1014aeb52138c5b95b0ea0a7e3a64
Additional Information 3: f5f9
Additional Information 4: 42b8d19532fa0d10cb2a6088e6fa1466

Similar Messages

  • "itunes has stopped working" after connecting ipad mini to computer Windows 7

    itunes can play 2 out of 10 movies already on my computer. Otherwise, when I start to play the other movies, I get the notice itunes has stopped working etc.
    Quicktime Player VERSION 7.7.4 can get to the Apple Store and order a movie.  But when I insert my Ipad mini, itunes IMMEDIATELY "itunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."  
    I reinstalled lastest itunes 11.1.3  after uninstalling it, and placed it not on the C Drive, which is pretty full but on another drive. I use ImTooiTransferPlatinum to put muisc onto my ipad mini, not itunes.

    also when I open itunes in safemode (using shift+ctrl), it works normally...

  • Please HELP, "iTunes has stopped working" error after connecting iPod video

    People please help me out!  I have a Razer Blade gaming laptop with Windows 8 64bit.
    I have an iPhone 5, iPad 2 and an iPod video (80GB).  I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video.  I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
    Procedures that I already tried and that were unsuccessful to solve the problem:
    Uninstall Quicktime
    Uninstall iTunes and reinstall
    Reset the iPod (several times)
    Delete TEMP files on computer
    Restart the computer (several times)
    Use a different cable and a different USB port
    The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors.  My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
    PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
    Thanks very much!

    It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
    Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
    If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
    [iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

  • Solution for 0x80070035 Error When Connecting to Non-Windows Shares

    My situation:
    Using Windows 7 64-bit OS I needed to connect to two Haas mills.  Both Haas machines have internal hard drives that have been shared and made available to the network.  Using Windows XP we were able to map drives or create shortcuts that pointed
    to these shares.  When we tried connecting to the shares with Windows 7 we received the error "Windows cannot access \\servername\sharename." Looking at the details of the error I found the error number 0x80070035.
    The solution was found in another forum:
    "On your “file server,” what is the underlying OS?  If it is a Linux based OS that uses Samba or CIFS to share out to Windows clients, you may need to adjust your NTLM authentication properties.
    At the Start menu search dialog box, type secpol.msc.  Navigate to Local Policies >> Security Options. 
    Go down to Network security: LAN Manager authentication level and first read the Explain tab. 
    Then go ahead and change the authentication level to Send LM & NTLM - use NTLMv2 session security if negotiated.
    If this fails to work, make sure you set your authentication properties back to the default level."
    Once I made the registry change, the shared areas were accessible.

    Hi,
    This could be an issue if the security software is interfering with the connection.
    You may temporarily try to disable the security software and check what happens.
    Also change the Windows Firewall settings and check if that is causing the issue.
    The error code 0x80070035 indicates that the network path is not found.
    This behavior occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.
    1.Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
    2.Right click on the connection that you use for the local connection, and then click "Properties".
    3.Click Continue button to verify the administrator permission.
    4.Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
    5.Click "Advanced" button in the open window.
      On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
    Thanks.

  • Error when connecting iPad to computer

    Whenever I connect my iPad to the computer, I get this error. Anyone know why this is happening?

    Take a look at the suggestions in this kb article.
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support

  • Uncaught exception: java.lang.NullPointerException error after connecting to BlackberryPlaybook

    Hi,
    I know that there are many other threads about this error but they're all to do with bbm.
    I have this error with my web browser, whenever I press the button for options, everything in the browser freezes. If I hold down the options button my multi task bar DOES pop up, but my browser is still frozen and if I leave and return the error ( Uncaught exception: java.lang.NullPointerException ) pops up.
    I noticed this started happening after I began using bridge and tethering with my playbook.
    The first time it happened I rebooted my phone and it DID work but I can't keep rebooting my phone for this, can I?
    My phone is now almost two years old (come this December) somebody please help? I don't want to send it in for repairs.

    Hi and Welcome to the Community!!
    There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
    Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    If it won't boot up cleanly, then you may need to try Safe Mode:
    KB17877 How to start a BlackBerry smartphone in safe mode
    There might be an updated code set from the carrier -- check them via this portal:
     http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
    Go to the home screen. Hold down the "alt" key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info. Alternative methods for bringing up the logs are in this KB:
    KB05349How to enable, access, and extract the event logs on a BlackBerry smartphone
    The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app. Still another method is to reload the BB OS cleanly, leaving some time between adding other apps onto the BB so as to be able to determine exactly which one is the cause.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Connect ipad to windows

    I have i-tunes instaled on my pc and its working well with my IPHONE 4S... Today I tried to connect my IPAD MINI to apdate software but, in first of all, my windows cannot connect the IPAD... Then, iTunes show me a message saying that cannot connect to IPAD because the time for doing that has expired..
    Any help??

    Try giving your iPad  a reset. sometimes the port gets turned off and a reset can turn it back on. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
    If that doesn't work, check the cable. If the cable isn't plugged in right or all the way it can hinder the connection.
    Try a different USB port.
    A bit more extreme but not as bad as it sounds, go into the control panel, uninstall itunes, apple mobile device service, apple application support. Then redownload and reinstall iTunes and try again.

  • Connecting ipad to windows PC

    when I conenct it says not charging and also is not visualizing ipad in itunes.
    I am using original cable which works if I charge ipad with adapter.
    What I have to do ?

    A lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    In terms of the iPad not appearing in iTunes have you tried the troubleshooting page : http://support.apple.com/kb/TS1538

  • When connecting iPad to Windows cpu, it also reads that my iPhone is connected when it is not.

    I am not sure why this is happening.  I have to repeatedly click the eject button in iTunes for the iPhone when I have my iPad plugged in.  I have no idea why it is reading like that.  Is this a problem?  Known issue?  Should I be concerned about it?
    Thanks!

    JMA253-
    Try disconnecting your iPad from the computer and run iTunes.  See if both the iPad and iPhone are visible under DEVICES.
    If you are running the lates versions of iOS and iTunes, you may have WiFi syncing capability.  It may also depend on running the latest operating system on the computer.
    Fred

  • DFS network drive giving error to many clients of Windows 7 and 8.1 after accessing from run

    Hi,
    My network drive (DFS) is giving below error after upgrade OS from windows 2008 to 2012. On many clients of windows 7 and 8.1 we are able to resolve
    by rebooting the system or by net use * /d command. But many user still getting error after accessing from mapped drive as well as from RUN command.
    some area stupid thing happening, after accessing from RUN like \\networkdrive then it will open successfully and show all the shared folder. When we
    click on particular shared folder it gives below error message and some works perfectly fine. Even though that person have rights on both the shared folder.
    """""check to make sure that the disk is properly inserted, or that you are connected to the internet or your network, and then
    try again. If it still cannot be located, the information might have been moved to a different location. """"
    Kindly suggest what should I do now?
    Inder Johar

    Hi Inder Johar,
    Please check if clients could connect to \\domain\dfsroot and UNC path. You could refer to the article below to troubleshoot the issue:
    DFS mapping error: Refers to a location that is unavailable
    http://jthys.wordpress.com/2013/02/20/dfs-mapping-error-refers-to-a-location-that-is-unavailable/
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    It’s simple enough to use a tool like ROBOCOPY or the File Server Migration Tool (FSMT) to copy your previous created folders over to the new name space
    \\networkdrive.
    Robocopy
    http://technet.microsoft.com/en-us/library/cc733145.aspx
    Microsoft File Server Migration Toolkit 1.2
    http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

    ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

    Hi,
    Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
    the Problem report.
    When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
    "native" windows drivers. Now, every major PC company has there own version
    Thus the problem report.
    There is  rather involved and lengthy procedure to check and install the correct Bluetooth drivers
    in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
    Here is what I propose;
    The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
    try apologizing to it and that you'll never never do it again, what ever it takes!
    Make the best investment you can make for your Blackberry, buy a media card.
    All the memory in the BB is dynamic, this facilitates the functions of the phone.
    By storing media in that memory, you effect are wasting X amount for file storage.
    Store all media and files on the media card, and you will have a smooth running device.
    They run about $25.00usd, they are easy to install, and they also make moving your
    media a snap. You will need the USB adapter that came with it, but you can get that at
    your local carrier store.
    So if you agree with this I need some info.
    On the Blackberry go to the options icon,click then scroll up to ABOUT.
    I need your software version number, it's listed in this format: 4.x.x.xxx.
    Send it back to me and I can tell you what size card you can get.
    Let me know your thoughts!
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

    problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
    I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

    Hi have you solved the issue ?
    Cause I have the same problem.
    Tnx

  • I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting,  and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

    I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed  Window 7  32 bit).  automatic software driver is not deducting,  and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
    I did install itunes and update also. but the above problem still same.
    Kindly give me solution of it. awaiting.
    Regards
    Abbas Kader

    try it with another computer to check if it shows up
    if so
    uninstall all apple software
    reboot
    use regedit to search and remove all itunes keys
    reboot
    resinstall apple software
    if non of that helps then try another cable
    if that don't help could be your phones connector is damaged

  • Ipad not connect with computer. error number (0xE8000084), ipad not connect with computer error number (0xE8000084)

    ipad not connected to computer. erreo number (0xE8000084)

    Hello Mohamed Abdo,
    It sounds like you are unable to connect your iPad to the computer because you get this error code when you try. I would use the troubleshooting for these types of errors from the following article:
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Start with these steps, and there are additional steps in the article if you need them:
    1. Restart your computer.
    2. Install the latest version of iTunes.
    3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
    Windows XP Service Pack 3
    Windows Vista
    Windows 7
    Windows 8
    4. Download and install any available software updates from Microsoft.
    5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.
    6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.
    7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
    8. Connect your device to a different USB port on your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for