Error After creating 2 new wagetypes.0015 40 00E7 does not exist in T512Z

Hi Experts,
I have created 2 new wagetypes.They are properly transported to Quality server.
And the amount is calculting correctly in Qual server for infotype 0015.Basis guys has transported that request to production server.
Now i am unable to find the wagetypes which i have created.When i go to pa30 and select 0015 Infotype and subtype 00E7 ,it is saying that specified subtype is invalid.When i try to create it is giving message that 0015 40 00E7 does not exist in T512Z-Check your entry.Really there is no particular wagetypes in that table.But in Quality they were there.
What could be the problem.What can i do to appear those wagetypes in Production Sysytem.
Please advice me to resolve the issue.
Thanking You.
Sai.
Reg

Dear Vicky,
If you have this entry in Q system it should be request transfer issue. I have such a cases sometimes.
I recommend go to D system, delete the record from V_T512Z and save the table. System will ask you to create a new request. Create it and put your changes into. Go out of table and come back and create the same record into it save your changes.
Release your request and transfer it again to Q and P. Hope to see the record in P system.
Otherwise do the method Okan recommended thru SM30. It works also but sometimes recreating the records are the only solution as I know
Regards,
Omid

Similar Messages

Error: ORA-16532: Data Guard broker configuration does not exist

Hi there folks. Hope everyone is having a nice weekend.
Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
1. Disable the standby database from within the broker configuration
DGMGRL> disable database MYSTD;
2. Stop the broker on the standby
SQL> alter system set dg_broker_start = FALSE;
3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
4. Restart the broker on the standby
SQL> alter system set dg_broker_start = TRUE
5. From the primary, enable the standby
DGMGRL> enable database MYSTD;
6. Broker configuration files will be created in the new ASM location.
I did so but when I try to enable the Primary back I get this:
Error: ORA-16532: Data Guard broker configuration does not exist
Configuration details cannot be determined by DGMGRL
Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
Thanks for your help.

Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Number range not update CIN error message Excise group.... does not exist

Hi Guru,
We have created new excise group in SPRO> tax on goods movement/India>basic setting>maintain excise group successfully.
My problem is, when we have update the number range (J1I9) for same excise group, system give the error message Excise group .... does not exist.
Please help on top priority.
Regards
BK GAIKWAD

Sir,
i have allready updated the same & also one thing is more, i have aal the above chnages in development server & then transport the same request to quality server.
in development server it is work fine only in quality server it is not display. please help
Regards
BK GAIKWD

ERROR: Cannot start mail services, configuration directory does not exist

I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?

Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

Error in CMC : The 0 plug-in does not exist in the CMS (FWM 02017)

Hello,
We have just installed a BO4 environment and migrated our legacy XIR2 environment (users, groups, universe, reports....).
I want now to modify some user/group securities on a folder. When I press the Assign Security button, the following error is displayed : The 0 plug-in does not exist in the CMS (FWM 02017)
Does anybody know about this problem ?
Thank you.

Hello,
It was good practice to redo the security when migrating from XIR2 to XI3.1.
So if you migrate from XIR2 to BI4, I think it might be a good idea to do it also.
Try first to see if you have the same issue by recreating a new group.
If it works fine, then you should use this new one.
Regards,
Philippe

ORACLE error 959 encountered ORA-00959: tablespace 'xyz' does not exist

im importing a dump to a newly created BD and im using 11g. I have already tablespaces and user for the dump to be imported.
The problems is, i have a total of 5 tablespaces created, all 4 are working well except the one tablespace and im receiving a 959 error(IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'xyz' does not exist). The log mentions that the tablespace does not exist even if this tablespace exist in the list of tablespace and datafiles created.
Hope you could help me with this. Thanks
Edited by: user8667617 on Feb 18, 2010 11:06 PM

SQL> Select name from v$datafile;
NAME
C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSTEM01.DBF
C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSAUX01.DBF
F:\ORC11DBUNDO\UNDOTBS01.DBF
E:\ORC11DBUSER\USERS01.DBF
E:\ORC11DBUSER\INT_TRANSACTIONS_DATA.DBF
E:\ORC11DBUSER\INT_DATA.DBF
E:\ORC11DBUSER\CAS_DATA.DBF
E:\ORC11DBUSER\COS_DATA.DBF
E:\ORC11DBUSER\INT_ONLINE_TRANSACTIONS_DATA.DBF
9 rows selected.
SQL> Select * from v$tablespace;
TS# NAME INC BIG FLA ENC
0 SYSTEM YES NO YES
1 SYSAUX YES NO YES
2 UNDOTBS1 YES NO YES
4 USERS YES NO YES
3 TEMP NO NO YES
6 INT_TRANSACTIONS_DATA YES NO YES
7 INT_DATA YES NO YES
8 CAS_DATA YES NO YES
9 COS_DATA YES NO YES
10 INT_ONLINE_TRANSACTIONS_DATA YES NO YES
10 rows selected.
SQL>
here are the result of my query and it seems that the tablespace is recognized by the DB.
is there still any reason why? also when i try to drop the said tablespace in getting a response of the "tablespace does not exist" but when i try to create the tablespace it says that "ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_TS1) violated"
hope you can help me with this.

Error in EA00 - EITR Billing Document No. does not exist

Hi Experts,
I am tryign to Final bill a moved out contract for the dates 16.05.2007 to 31.12.2008.
The joint invoicing condition is 1. When I try to bill these billing documents through EA00 I am getting the Error "EITR <Billing Do. no.> A does not exist.
Even when I try to confirm move out and Final Bill through Transaction EC56E I am getting the same error for all 3 contracts.
The three billing documents for which I am getting the error have been already reversed and are not seen in EITR. They are seen in table ERCHC.
Any idea why this error occurs? I added entries in table EITR manually for the 3 billing documents, then the error does not occur any more. But this doesnt seem to be a very acceptable solution.
Let me know your insights on this one.
Thanks and Regards,
Prajakt Dhumal

Thanks for your mail.
I am trying to final bill a customer (03). The bill order is created successfully for the period which I am trying to bill. Also, when I am trying to bill the contract thru EA00, I am getting an error that u201CEITR <billing doc no> A Not foundu201D.
The billing doc in the above error is of a different period (later that the Final Billing period) and has also been reversedu2026 I am not understanding why its referring to that Billing doc while billign a different period entirely
Thanks and regards,
Prajakt

Logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist

Hi,
Getting following error while trying to connect MySQL server to the MDM Import manager.
logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied
i have supplied the following paramter values.
Type : SQL server
Remote System : MDM
DBMS server : localhost
Database Name : testing
user: < MySQL user name>
password : < MySQL password>
pls let me know how can i solve this problem.
thanks

Refer the blog
/people/rupesh.kumar4/blog/2008/08/20/how-to-integrate-mdm-with-mysql-server-50
thanks
Rupesh

Error "Processing routine ENTRY in program ztest does not exist"

Hi All ,
           I facing problem in Samrt form driver program
        Error "Processing routine ENTRY in program ztest does not exist"
         when i given print through T.Code Me22n
         Can you suggest me why i facing this problem.........
This is below my driver program code:
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Mar 10, 2010 9:53 AM

Hi nIck,
         I write the code this way
          can you suggest me any changes are require
FORM ENTRY USING RETURN_CODE TYPE I US_SCREEN TYPE C.
PERFORM DATA_FETCH.
PERFORM DATA_PROCESS.
PERFORM CALL_FORM.
ENDFORM.                    "entry
*&      Form data_fetch
      text
FORM DATA_FETCH.
PONUMBER = NAST-OBJKY.
ENDFORM.                    "data_fetch
Regards
Raju
Edited by: raju mahapatra on Mar 11, 2010 7:23 AM

My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

Okay. I will try this again. I did remove and reinstall earlier, but will
do it now.
regards, Mike
On Wed, Oct 15, 2014 at 12:55 PM, Sabian Zildjian <[email protected]>

Process chain failure SQL ERROR 942 ORA-00942:table or view does not exist

HI all,
We have a proces chain with 'ceate index' process type and got failed with an error as follows......
SQL ERROR 942 ORA-00942:table or view does not exist
Plz can anyone give solution for this error.
SATISH.

Hey Satish,
Please refer to this thread:
BRCONNECT fails with SQL error -942 at location ora_vers_get-1
I am sure the solution there should solve your problem. There are various other discussions about this error in the forum, I suggest you look through them for better understanding and additional material.
Cheers!!!
Manu.

While creating the user getting iPlanetAMUserService does not exist error.

Hi,
I was trying to create a user in access manger 7.1 console . I am getting error like iPlanetAMUserService does not exist.
path: Access control>Realm>Subjects.
can anyone please help me to give the suggestions.
Thanks
GV

And why do you think those jars are required? Guess work? Glassfish already provides them, remove them from the application deployment and try again.

BI Administrator Error When Updating Rowcount: table or view does not exist

I am using BI Administrator 11g. After creating a new repository and importing metadata, I brought the Physical model into the BMM layer. When I tried to update the rowcount for the tables in the physical layer, I get:
There was an error while updating row count for "<instance>".."<schema>"."<tablename>"
[nQSError 17011] SQL statement execution failed.
[nQSError 17001] Oracle error code 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute: select count(*) from <tablename>.
I created the connection pool during the import process and the tables were found at that time. But after the import is complete I can never update the row counts. I do have access to all the tables in question via the user account in the connection pool.
Anyone have any ideas?
Thanks,
Ken

You need to check "Require Fully Qualified Name check box in connection pool properties. This is needed when you are using non owner user name for accessing database shemas.

Error After creating 2 new wagetypes.0015 40 00E7 does not exist in T512Z

Similar Messages

Maybe you are looking for