Error after driver updates

I'm running win2k on a K7N2G-L. After updating drivers from MSI and nvidia I get an error message about half of the time when windows starts up stating that certain files required by windows have been replaced by unrecognized versions, and to please insert my win2k CD. The options are "retry," "more info," and "cancel." If I insert the CD and hit retry the message goes away and the win2k installer program starts up asking if I want to install windows, etc., which I assume I do not. "more info" does not give more info. Cancel allows windows to continue starting.
Does anyone have any advice on how to get this to go away, or what might be wrong? It's strange that it doesn't happen every time. It also happens sometimes when just logging out of windows and back in rather than restarting.
Thanks for any help.
Russ

Need more info on what drivers you're using...if you use MSI then use MSI, if you're using nVidia then use nVidia...don't mix them as this will give you problems...
Most ppl are using the 2.03 release from nVidia with this board and the -ILSR board both original release and Delta release...
If you decide to go that route then you will need to do a clean install of your OS....there are ways around it but it's best to just start from scratch...
If you can get a copy of Win2k that has SP3 on it already...if you can't find one you can look up how to slipstream it onto a burned CD using Google to look up sites that have step by step instruction.
Load the OS first
Install SP3
Load the 2.03 package
Load 41.09 nVidia video drivers *or whatever flavor you're happy with*
Do it in that order to ensure that your drivers are installed in the proper order and you won't get error messages...
Cheers!! 8)

Similar Messages

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

Moto X 2nd 2014 error after lollipop update

I've got moto x xt1096, and faced with terrible bug after update to 5.0.
Time to time on day faced with crash and restart of stock launcher with error "unfortunatelly google search (or app) has stopped"
I made a topic on motorola forum, but didn't find solution as yet. (tried to make FDR, safe mode, clean cache/data etc.)
Error after lollipop update . All Discussions (996) . MOTO X™ 2nd Gen . Forum . Motorola Owners' Forum
does anyone faced with that issue too?
And maybe someone know any date about 5.0.2 or other update for xt1096, maybe in next update it will be fixed?

Looks like it's been released:
Android 5.0 Lollipop Now Rolling out to the Verizon Moto X 2014 | Androidheadlines.com

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

8330 alltel curve won't sync with PocketMac, even after driver update

Sooo I have a blackberry curve 8330 I recently got through Alltel. I
installed PocketMac twice now, and was reading all about the FAQ's and
tech. support and it's not recognizing my blackberry. I tried syncing
and it said the "error 1: skipping" thing. I also downloaded the
"driver update" and it's still doing the same thing. It shows my phones
like charging when it's plugged in but I can't sync it. This is my
first blackberry and I'm confused.
Can someone help me, please?
And, does anyone know what "Enterprise Activation" is?
Thanks
EDIT: sorted out the formatting
Message Edited by Andy on 07-26-2008 09:21 AM

I also had problems syncing my 8330 Blackberry with my Mac with a program called PocketMac and after installing and reinstalling the program several times and syncing for hours on end (the program was just sitting their), I also spent $49.95 for PocketMac Tech Support. Still no results. I did a little more research and I found a program that I thought was easy to install as long as you follow the simple instructions and it worked great, the program is The Missing Sync for Blackberry Version 2.0.1. it cost $39.95 it is available at www.markspace.com.

Error after Bios update on VN7-591G

Hello Guys, I update my Bios to latest version which I found in Acer website - v1.13, everything goes smooth, but after the update my laptop boot with following error - "No bootable device''. I found how to bypass this problem - switching from UEFI secure boot to Legacy. And after this everything goes normal, but I want to use UEFI secure boot. Problem here is that when I move back from Legacy to UEFI I receive same error nobootable device and I can't run my OS. Any clue how can I fix this problem ? Thanks in advance,Br YoZone

Yeah, some of the stuff doesn't add up.....but it should be an easy fix. 1.backup all your important files to a different drive so you can retrieve them later (this is very important because you're going to wipe your SSD clean and start over) 2. Grab your windows 8.1 installation media as you'll need it soon 3. go in to your BIOS settings and load administrator defaults. It's F9 on my Acer computer, not sure what it is on yours. And then save and exit (possibly the F10 key) 3.5 go in to bios and enable boot menu and then save and exit 4. Boot your windows installation media 5. after you select your language, click "repair my computer" 6. Navigate in the menu until you find "command prompt" 7. Use diskpart clean (which will wipe your SSD clean) http://forum.crucial.com/t5/The-Cru/Reset-your-SSD-to-factory-settings-Windows-DiskPart/ba-p/162503 After you use the "clean" command as described in link above, type "convert GPT" and hit the enter key.And after you use the "convert GPT" command, type "clean" and then hit the enter key on your keyboard And then exit out of there to get back to your windows installation media drive main menu. 8. Navigate in the windows installation media menu until you find "shutdown", and shutdown your computer 9. Boot to your windows installation media and install windows. Install windows on the entire unallocated space. Do not partition and do not format. The windows installer will partition and format your SSD automatically for you. Edited: Edited to make sense since you don't have Acer OEM windows.

RM 900 remote doesn't work after driver update

Hi!
After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
Any clue how to make it work again?
Using Windows XP SP3 and Audigy Platinum Ex.
Thank you again in advance.
PD: Excuse my poor english, it's not my nati've language.

Hello Jashue67,
Sorry to hear about all the trouble with the Apple TV. It sounds like you have done a restore but need to pair your Apple TV remote at this point. You can follow these steps to pair the remote:
Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
You can find the full article here:
Apple TV: Pairing and unpairing the Apple Remote
http://support.apple.com/kb/ht1555
Thank you for using Apple Support Communities.
Best,
Sheila M.

G510 Windows 8.1 Pro X64 Conexant Audio Driver Error and Driver Update Request

When are we to expect some updates in the drivers for G510, specifically for both graphics (Intel and AMD)
Also I am using G510S's Lenovo Power Management for Windows 8.1(running with no issues) as Windows 8 version was not compatible and there is no Win8.1 version.
And there is an update available for Conexant Audio in windows update and after the update when ever I play music, a few seconds in the Audio Device stops(a red cross on volume icon) and then troubleshooter automatically runs and fixes the audio device and audio comes back.
Also I would like to request that you bring back Dobly Advanced Audio v2 that was available with WINDOWS 8 version of the driver. It was just much more convienient and I liked its graphics equilizer much better.
K thnx
G510 - Windows 8.1 Pro X64
Core i5 4200M
Intel HD4600 & AMD Radeon HD 8570M

bump

Tons of permission errors after iLife updates....

I always repair permissions before and after any updates..
Before the iLife update I had just one permission error with cups or whatever, I always get that one...
After the iLife update, I am having hundreds of errors every time I repair.. I also had a kernel panic this morning..
I ran FSCK, hundreds of errors.
I've used disk utility to repair disk.. No problems found.
I've used Disk Warrior, No problems found..
Anyone else experience this? Should I try and reapply the standalone installer? I hate to reinstall any software with all these permission errors.
Advice?

Yes, everything seems to be working fine.. I reapplied the standalone, no longer have hundreds of permission errors, but still have about 50 each time I repair.. The report shows all errors related to front row and iPhoto..
If it's no cause for concern, I won't worry about it..
Thanks.
Message was edited by: solsun

Spry Error After 2013 Update

This message is popping up on our company website after I updated the software.
MuseJSAssert: Error calling selector function: reference Error: Spry is not defined.
When I check the validator.w3.org it is saying that the errors are being cause from out of date and obsolute. Is there a way to uninstall that update and just got back to the old software package I had so I don't have to redue any of this again?

By the way the website is www.warrenrep.com

N97 system error after software update

hello there...
I've recently updated my N97 software to 21.0.045 (the last one)... and right after the update is finished, it gave me "system error" on installing... and now I can't get access to the clock, the calender and others... it even stops responding for a while each time I open sittings... and there is no theme effects when the screen flips to landscape even if it is on... please people, I really need help in that, the clock, alarms and the calender are soooo important for me !!!
thanks
Any fool can make things bigger, more complex and more violent. It takes a touch of genius and a lot of courage to move in the opposite direction.
Solved!
Go to Solution.

psychomania wrote:
I'm not being offensive. Just stating facts.
I am simply highlighting the fact so that the user will see it and be aware of what you suggested would do. Sorry if you took offence at that but the user comes first.
of course customer first , i'm doing this with happiness , cause i'll be very happy to help them without reaso
psychomania wrote:
starting petty arguments to cover up your mistakes like you did yesterday.
i'm not covering up my mistakes , what mistakes do u mean ?? yesterday , i said that i said that because it's in Nokia warranty of the authourised nokia resellers in my region and didn't know that this doesn't apply all over the world
psychomania wrote:
This forum exists to help people, not for you to spam posts without thinking about the consequences.
it's not for me, it's for all NOKIA users, and i'm not spamming as if i was that, so how could i stay all that time, solving others problems with alot of thanx
even if i solved 2 problems , that proves that i'm not spamming
so .... welcome bro in NOKIA USERS discussion board
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

"LogonUI.exe-Application Error" error after Windows update at Win10

I get the LogonUI.exe error after the Windows 10 TP setup. Happening on both upgrade case, and also new install case. The Windows 10 TP was ok at the setup beginning, but this error happening after a Windows update and reboot. Now I cannot logon and cannot
go to the safe mode, seems F8 or shift-F8 has no function. I'm using a T440s NB and checked all hardware diagnostics are good.
stanley

Just a data point... I've gone through the update (install of KB3002675 and KB3001512) and everything's still working. It's not breaking for everyone.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Unable to boot up after driver update on X200 - please help!!

When I boot up now my screen goes to "Windows XP," then hangs on a blank blue screen (not BSD) - won't go any further. Scoured other forums and have not found a solution - tried:
1. Disabling VT-d in BIOS
2. Loading defaults in BIOS
3, boot into diagnostics from BIOS
4. Removed primary battery *have not yet tried removing backup battery)
How do I boot windows XP in safe mode using this computer?
Also tried F11 *disk doctor" - it would not launch.
This all happened as I was configuring my system today for the first time (relatively new system) and performed many driver updates - did this one by one and things were going fine. Then, I discovered the ThinkPad System Update package - installed this and then it scanned automatically for driver updates - I did three at once (I think one was finger print reader drive, one AMT 4.2, and the other some Microsoft hotfix) - after this, no starting up. I know there's a BIOS update to do (3.11 - I have 3.10) and I have created the boot CD for this though don;t have my base station/CD with me so I have to wait to try this until tomorrow.
Any ideas? Please help - this is insane, and I am kicking myself as I knew I should have kept doing these one by one and I also need a good imaging program to create images after each successful update so I could just roll back on an unsuccessful one - is there a "SuperDuper!" imaging program for Windows ("SuperDuper! Is the one I use for Mac)?
Thank you.

Nvidia's official site. I don't know if I am allowed to send links on this site so I am not going to do that.
Anyway, I tried to contacted the apple on 16'th and just got a response a few minutes ago.Unfortunately then I had to reinstall my mountain lion all over again by recovery. Well, I lost many stuff but 'Hey! Mountain Lion got much faster for some reason so, I'm not complaining.
Thank you for your reply.

RV082 IE certificate error after firmware update

Hello.
HELP! I have a RV082 with firmware 2.0.2.01-tm that keeps showing a "There is a problem with this website's security certificate" error message on every computer in the office after I updated to firmware 2.0.2.01-tm (previous version was 2.0.0.19-tm). I'd click on "Continue to this website" and be able to access the router on a few computers, but for our file server. I've tested on computers running XP, 7 & 8 using IE 8, 9, & 10 and there seems to be no pattern as to which ones will allow me to gain access and which ones won't. The file server is running Server 2003.
My questions are:
1. How do I get rid of the "security certificate" error message?
2. How do I get all computers to be able to gain access to the router on the ones that need access, but can't?
3. Why did this message show up after I updated the firmware?
Thanks in advance for any help/information on resolving this problem!
Alice

Dear Alice,
Thank you for reaching the Small Business Support Community,
I suggest you to check on the below threats, they might be helpful for you to try;
https://supportforums.cisco.com/thread/2071417
(Notice the crypto key generation does not apply to your case but the IE settings yes)
https://supportforums.cisco.com/message/3761503#3761503
I hope they help you working this issue out and please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Error after driver updates

Similar Messages

Maybe you are looking for