Error after install reboot: Now I cannot continue Installation

So I'm working with a new MBPro which was running Leopard.
I put the disk in, it started to install, rebooted, installed for another 10 minutes and then I got an error and had to restart.
I was brought to the Welcome, Select a Language dialogue box (cringe).
Now I am stuck at a screen where it tells me to continue installing, I tell it to and I get a, cannot install error.
I'm stuck! I've tried repairing the volume in Disk Util, no luck.
In terminal I can still access my root in /Volumes/Mac HD/Users...

Restore the bootable backup/clone or Time Machine backup you made of the original installation and try again. Alternatively, since it's new, use the restore disks that shipped with the machine and restore those, make a bootable backup/clone onto an ext FireWire HD, and try again.
See these for details:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

Similar Messages

My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Tried to update my itunes and it says "iTunes installed incorrectly" now i cannot access my library

tried to update itunes and it says after download "iTunes installed incorrectly" now I cannot access my library.....HELP!!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
Neeraj

Hi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj

Receiving I/O error after installing Acrobat 8.1.2 update

After installing the update, I cannot scroll or page through a PDF doc without constantly getting this error message:
There was an error processing a page. A file I/O error has occurred.

I closed Acrobat, then closed other apps, then re-opened the PDF in Acrobat. Seems to be ok now.

Getting a reistry error after installing telling me to reinstall itunes

I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HP4501e "print spooler off" error after installing printer update

Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

Getting error after installing admt 3.2

hi team
i am getting error after installing the admt 3.2 on server 2008 R2 where i have installed sql server 2008 sp1 with express edition
the server is a DC
the error is "Unable to check for failed actions. :DBManager.IManageDB.1 Unable to retrieve the database file pagth from the registry. the system cannot find the file specified"
Thanks,
viraj

You should change the forum type on this to a question. The way you have this labled as a discussion not a problem.
See if the link below helps you out.
http://support.microsoft.com/kb/2266373
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
http://www.pbbergs.com Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided "AS IS" with no warranties, and confers no rights.

I get a 213.10 error after installing Captivate

Why do I get a 213.10 error after installing Captivate 7 on a Windows 7 32 bit workstation?

These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?

Itune store error after installing iOs6

After installing IOS6, I get "Cannot connect to iTunes Store" error from the Passbook App

Known problem.
IOS 6 App store crash: Apple Support Communities

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.

Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

Error after Install SAP NetWeaver 7.01 ABAP Trial Version

Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?

Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

After install KB2889927 Outlook client cannot load Offline address book.

After install KB2889927 Outlook client cannot load Offline address book. Client says: Offline address book Connecting to Microsoft Exchange, and does nothing.
After Uninstall KB2889927 Outlook clent download address book successfully.
Somebody has a problem with KB2889927?
P.S. Exchange 2013 SP1 RU6

Hi,
According to your description, I noticed that the issue occurred after install KB2889927 for October 2014 Office 2013 updates.
I read the
November 2014 Office Update Release and find that the following KB can resolve the OAB download issue in Outlook 2013, please install it to have a try:
For Office 2013: http://support2.microsoft.com/kb/2899493
Or for Outlook 2013: http://support2.microsoft.com/kb/2899504
Regards,
Winnie Liang
TechNet Community Support

Read/Write errors after installing SSHD

After installing a Seagate Thin 500GB SSHD into my Late 2008 MacBook Pro, I would get errors after my computer had been asleep for several hours. The error codes end with -50. I thought that limiting the speed of the drive with a jumper would work, but it hasn't.

This is from the Toshiba knowledge base : http://forums.toshiba.com/t5/Computer-Troubleshooting/Errors-after-installing-new-advanced-format-ha...
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Error after install reboot: Now I cannot continue Installation

Similar Messages

Maybe you are looking for