Error after load_de.sql in 2.2.1.0.0.4
I experienced this error message:
ERR-1016 Anwendung "4550" Seite "11" nicht gefunden (angeforderte Sprache="de")
after having loaded the german language (running load_de.sql - I did set nls_lang=AMERICAN_AMERICA.AL32UTF8) and had logged in as user FLOWS_0202000;
whenever I switch to English (US) everything seem to work fine, whereas with Browser-Language= German I get above error.
BTW: I did apply for new the latest 2.2.1 patch as stipulated in the post installation tasks.
How to get around that one ?
Thanks for ur assistance.
Bernhard
Message re: BTW: was edited by:
BernhardFW
Joel,
the answer to your last question: Can you then use APEX in Geman? NO. -
I originally came from 1.6 (from the companian CD or download), than upgraged to 2.0 - then to 2.2 then applied the generic patch).
I can login with Browser set to Engl.(US) - when I then switch the browser from Engl./US to Geman in the App.Builder (Engl.page 1500) - I get:
"ERR-1016 Anwendung "4000" Seite "1500" nicht gefunden (angeforderte Sprache="de")
Zurück zur Anwendung."
I switch to Engl. and to SQL Workshop - page 3002 - then switch to DE and refresh and get:
"ERR-1016 Anwendung "4500" Seite "3002" nicht gefunden (angeforderte Sprache="de")"
Hope that assists.
Bernhard
BTW: users who download the HTMLDB/APEX sources via the Companian CD do receive the 1.6 sources and then have to upgrade to 2.0 or 2,2, etc.
Why don't they receive the 2.2 sources straight away ?
Similar Messages
-
Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, NamanHi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu -
EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2
Hi guys.
We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
This is not the first time that we have seen this behaviour.
I have experienced it in one other environment, which I keep meaning to rebuild.
These installations are in completely different environments. The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
However, this is now far too coincidental to be the case.
Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
I could really do with a quick win on this one.
ThanksHi,
i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
My system is different:
Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
The issue appears in the last months.
It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
Could you verify if on some machine the evdre works fine and and that when you delete the added member evdre starts to work?
Kind regards
Roberto
Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM -
Im getting this error after trying to laounch SQL*Plus
Hallo, guys!
Help me on this one. I'm new to Oracle on Windows 2000 Professional
Im getting this error after trying to laounch SQL*Plus
Error 6 Initializing SQL*Plus
Message file spl<lang>.msb not found
SP2-0750:You may need to set ORACLE_HOME to your Oracle Software directory
Urgent please respond
Thanks
sridharVerify the contents of the following subkey in your Windows2000 registry:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_YOUR_HOME_NAME
Your Windows 2000 registry must contain several minimum parameters, defined as registry entries inside the above subkey (See http://download-east.oracle.com/docs/cd/B19306_01/win.102/b14304/registry.htm#i1006544). One of them is ORACLE_HOME, which could have been accidentally removed or changed. ORACLE_HOME must contain the home OS path to the SQL*Plus executable in your machine (For example, C:\Oracle\OraDB10g). I tried changing the name of the ORACLE_HOME registry entry in my machine and received the same exact messages you did when launching SQL*Plus.
In your OS, verify also Control Panel > System Properties > Advanced > Environment Variables > System Variables > Path, and make sure the above ORACLE_HOME's path is included in the Path variable (preferably in the starting position)
Regards,
Luis Morales
ConsiteNicaragua.com -
Error after update Oracle SQL Developer Migration Tools
Hi,
I'm receiving a error after the update of Oracle SQL Developer (v.1.1.3.27.66) to work with mySQL migration tool.
This error appear when it´s restarting:
Exception Stack Trace:
java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
at java.net.URL.getURLStreamHandler(URL.java:1106)
at java.net.URL.<init>(URL.java:393)
at java.net.URL.<init>(URL.java:283)
at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
at oracle.ide.layout.URL2String.toURL(URL2String.java:104)
at oracle.ideimpl.editor.EditorUtil.getURL(EditorUtil.java:150)
at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:122)
at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1751)
at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:356)
at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1879)
at oracle.ide.layout.Layouts.activate(Layouts.java:784)
at oracle.ide.layout.Layouts.activateLayout(Layouts.java:186)
at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:734)
at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Anyone knows why that is happining?
Thanks in advance,
Felipe.
Message was edited by:
felipe.bHello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark -
Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1
I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
Facing Parse Errors after upgrading database from 10g to 11g
Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 30 anonymous block
319e277050 57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
SureshHi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards, -
Error in appdstln.sql during upgrade to 12.1.1
Hi All,
I am upgrading my 11.5.9 ebs to 12.1.1 I have gone through all steps outlined in chapter 3 of Oracle® E-Business Suite
Upgrade Guide Release 11i to 12.1.3 Part No. E16342-03. I am now in point number 10 under " Perform the Upgrade" i.e :
Run the American English upgrade patch driver which is (u6678700.drv)
After going through nearly 130,000 jobs I got the following error in appdstln.sql
ORA-01400: cannot insert NULL into("AP"."AP_PAYMENT_HIST_DISTS"."INVOICE_DISTRIBUTION_ID")
Please help me get through this error asap as we are very low on time.Please log a SR as no similar issues are reported in MOS website.
Thanks,
Hussein -
Error while installing SQL Server 2005 SP3
I have installed SQL Server 2005 Standand Edition (32-bit) on a standalone server machine running
Windows Server 2003 R2 Standard 64-bit with Service Pack 2. After installing SQL Server, when I tried installing the Service Pack 3 (as per application requirement) through local administrator account, I am repeatedly getting below error in
"C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB955706_SqlSupport.msi.log"
SECUREREPAIR: SecureRepair Failed. Error code: 4ec4E6A3388
MSI (s) (F8:40) [16:49:33:515]:
Error 1260. Windows cannot open this program because it has been prevented by a software restriction policy.
I have checked rights on the folders and also got the anti-virus (symantec) services stopped on the server. Still no success, can anyone help.I have installed SQL Server 2005 Standand Edition (32-bit) on a standalone server machine running
Windows Server 2003 R2 Standard 64-bit with Service Pack 2. After installing SQL Server, when I tried installing the Service Pack 3 (as per application requirement) through local administrator account, I am repeatedly getting below error in
"C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB955706_SqlSupport.msi.log"
SECUREREPAIR: SecureRepair Failed. Error code: 4ec4E6A3388
MSI (s) (F8:40) [16:49:33:515]:
Error 1260. Windows cannot open this program because it has been prevented by a software restriction policy.
I have checked rights on the folders and also got the anti-virus (symantec) services stopped on the server. Still no success, can anyone help.
Just to add: Have already referred
http://support.microsoft.com/kb/918357 -
Getting error while expanding SQL Server 2012 agent.
Hi All,
Server Version Details: Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
We are using SQL Server 2012 in Active/Passive Cluster and the problem is getting below error while expanding SQL Agent. Please share you views on this. Thank You.
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
A severe error occurred on the current command. The results, if any, should be discarded. (Microsoft SQL Server, Error: 0)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=0&LinkId=20476
BUTTONS:
OK
Regards,
Kalyan
----Learners Curiosity Never Ends----Hi OHM SAI RAM,
I’m writing to follow up with you on this post. Was the problem resolved after checking the error message and performing the action plan steps? I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings or
concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Getting Error when running sql from concurrent program in R12
Hi All,
I created concurrent program and attached EXECUTABLE which executable method as SQL plus .
Using this program I am running one SQL file in R12 when I am running I am getting below error .
Same king of program I have define in 11i and running it is running can anyone please help me if I need to do any set ups or security thing to resave this problem.
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 3162719.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Regrds,
Sridhar.user12000862 wrote:
Hi all,
Thanks a lot giving replay below simple code I have put in my SQL file for testing Eventhough it is giving error .
Table which i am using in Apps schema only.
declare
BEGIN
insert into BRCD_HZ_DNB_XTBL_TEST values (666,'Y','547','Y','12254','TESTING','N','Y');
commit;
END;
/Try this instead
WHENEVER SQLERROR EXIT FAILURE ROLLBACK;
WHENEVER OSERROR EXIT FAILURE ROLLBACK;
insert into BRCD_HZ_DNB_XTBL_TEST values (666,'Y','547','Y','12254','TESTING','N','Y');
commit;
exit;HTH
Srini -
Error after changing password in Discoverer Viewer (11.1.1.4)
I (and all other users) get the below error after changing the password used to login to Discoverer Viewer...
Weblogic Version 10.3.4
Discoverer Version 11.1.1.4
Error
The application encounters an invalid state. .
- java.rmi.RemoteException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 ; nested exception is: oracle.discoiv.beans.ConnectionStoreException: ORA-6510: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1
I have already tried the following oracle note (which did not work): http://docs.oracle.com/cd/E17904_01/doc.1111/e14770/discoverer.htm#BABDJJBE
"43.1.1 Issues with Metadata Repository and Oracle Database 10g Release 1"
But we have Oracle Database 11g.
If anyone has any suggestions please advise. I have had a ticket open with Oracle Support now for a few months and they cannot reproduce.
Thanks,
JustinWe also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 -
My customer has an issue, and error message as below:
<PRE>Oracle error 1403: java.sql.SQLException: ORA-01403: no data found ORA-06512:
at line 1 has been detected in FND_SESSION_MANAGEMENT.CHECK_SESSION. Your
session is no longer valid.</PRE>
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
And customer’s statement is: Upgrade from EBS 11.5.10 to 12.1.3. Login the EBS, open any forms and put it in idle. Then refresh the form, error happens
Then, I checked ISP, and found two notes:
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid (Doc ID 1284094.1)
Note 1319380.1: Webadi Gl Journal Posting Errors After Atg R12.1.3 (Doc ID 1319380.1)
But these two notes are both WebADI.
Following is the data collection from customer:
1. Run UNIX command to check .class file version:
strings $JAVA_TOP/oracle/apps/bne/utilities/BneViewerUtils.class | grep Header--> S$Header: BneViewerUtils.java 120.33.12010000.17 2010/11/21 22:19:58 amgonzal s$
2. Run SQL to check you patch level:
SELECT * FROM fnd_product_installations WHERE patch_level LIKE '%BNE%';--> R12.BNE.B.3
3. Run SQL to check patch '9940148' applied or not:
SELECT * FROM ad_bugs ad WHERE ad.bug_number = '9940148';--> No Rows returned
4. Run SQL to check patch '9785477' applied or not:
SELECT * FROM ad_bugs WHERE bug_number in ('9785477');-->
BUG_ID APPLICATION_SHORT_NAME BUG_NUMBER CREATION_DATE ARU_RELEASE_NAME CREATED_BY LAST_UPDATE_DATE LAST_UPDATED_BY TRACKABLE_ENTITY_ABBR BASELINE_NAME GENERIC_PATCH LANGUAGE
576982 11839583 2011/8/7 上午 08:20:36 R12 5 2011/8/7 上午 08:20:36 5 pjt B n US
516492 9785477 2011/6/12 上午 11:42:45 R12 5 2011/6/12 上午 11:42:45 5 bne B n US
546109 9785477 2011/6/12 下午 01:17:41 R12 5 2011/6/12 下午 01:17:41 5 bne B n ZHT
5. Run SQL to check the status of object ‘FND_SESSION_MANAGEMENT’
SELECT * FROM dba_objects do WHERE do.object_name = 'FND_SESSION_MANAGEMENT';-->
OWNER OBJECT_NAME SUBOBJECT_NAME OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS TEMPORARY GENERATED SECONDARY NAMESPACE EDITION_NAME
APPS FND_SESSION_MANAGEMENT 219425 PACKAGE 2004/10/30 下午 01:52:35 2011/8/7 上午 08:18:39 2011-08-07:08:18:26 VALID N N N 1
APPS FND_SESSION_MANAGEMENT 226815 PACKAGE BODY 2004/10/31 上午 01:05:40 2011/8/7 上午 08:18:54 2011-08-07:08:18:27 VALID N N N 2
So, my question is: Customer’s BneViewerUtils.java version is already 120.33.12010000.17, which greater than 120.33.12010000.14. Is there any others solutions for this issue? Does customer still need to apply patch '9940148' based on action plan of
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid?
Customer's EBS version is 12.1.3; OS is HP-UX PA-RISC (64-bit); DB is 11.2.0.2.
Thanks,
JackieAnd customer’s statement is: Upgrade from EBS 11.5.10 to 12.1.3. Login the EBS, open any forms and put it in idle. Then refresh the form, error happens
Idle for how long? Is the issue with all sessions?
Please see these docs/links
User Sessions Get Timed Out Before Idle Time Parameter Values Are Reached [ID 1306678.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Timeout+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Then, I checked ISP, and found two notes:
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid (Doc ID 1284094.1)
Note 1319380.1: Webadi Gl Journal Posting Errors After Atg R12.1.3 (Doc ID 1319380.1)
But these two notes are both WebADI.Can you find any details about the error in Apache log files and in the application.log file?
Any errors in the database log file?
So, my question is: Customer’s BneViewerUtils.java version is already 120.33.12010000.17, which greater than 120.33.12010000.14. Is there any others solutions for this issue? No.
Does customer still need to apply patch '9940148' based on action plan ofIf the issue not with Web ADI, then ignore this patch. However, if you use Web ADI you could query AD_BUGS table and verify if you have the patch applied.
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid?
Customer's EBS version is 12.1.3; OS is HP-UX PA-RISC (64-bit); DB is 11.2.0.2.If you could not find any details in the logs, please enable debug as per (R12, 12.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN [ID 422419.1]).
Thanks,
Hussein -
I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
inside SharePoint and Document Libraries.
But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message.
The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.Hi Hedayat-Abedijoo,
According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
According to my search, there may be two reasons for the problem:
This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
in IIS instead of through SharePoint (using the approved method).
This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
If you have any questions, please feel free to let me know.
Thanks,
Wendy Fu
Maybe you are looking for
-
Webinar: Change Management and Transport in the Enterprise Portal
<b>SAP NetWeaver Know-How Network Webinar: Change Management and Transport in the Enterprise Portal Wednesday 21 July 2004 11 a.m. EDT</b> On Wednesday 21 July, Scott Jones hosts the webinar titled <b>Change Management and Transport in the Enterpris
-
Open database in different location
Good morning. I try to open existing Berkeley DB JE (using DPL), than previously i copy in othrer folder, but it not work. I open the jdb files and I found that the absolute path where the DB was created. Any ideas? Thank you
-
Can I access my old ITunes account or must I wait 90 days ??
-
40735 WHEN-NEW-FORM-INSTANCE-TRIGGER raised unhandled exception ORA-06502
After migrationg my form from 6i to 10g I am getting the 40735 WHEN-NEW-FORM-INSTANCE-TRIGGER raised unhandled exception ORA-06502 err msg. the field is a date field and should be automatically populated with sysdate- 365. but when i open the form to
-
Sync iPhoto library in Aperture
Is it possible to sync my iPhoto library in Aperture. I use my iPhoto library to view and show the images with or without slideshows and my Aperture library to edit the images. It would be nice that the edited images will show up in iPhoto and the im