Error after moving user to another organiz.l unit (Edir)

I am moving users to another org. units.
For 2 users, i keeep seeing the following error in /var/log/datasync/connectors/default.pipeline1.mobility-AppInterface.log:
ERROR [Device_Thread-29] [sync:252] [userID:cn=**,ou=**,o=**] [eventID:] [objectID:] [Sync] Fatal - unable to find folder object for folderId = 2
Any idea?

If you are moving users around OUs/Orgs then you will need to remove them from the connector, wait for them to vanish, move user in eDirectory, re-add to connector. As far as I'm aware this is a limitation in all Datasync connectors that link to eDirectory.

Similar Messages

Authorization and moving employes to another organizational assignment

Hello! I have a big problem with authorization.
Lately some employes have been moved from one organizational assignment to another organizational assignment.
After moving I prepared the user and the role for this user he will be able to read infotype records for employes in the organizational assignment where they were moved.
And now I have big problem because this user can read data of employes in current organizational assignment and also data of these people in old organizational assignment, thought I didn't give him authorization for this old organizational assignment.
I checked view of table V_T582A and there in infotype 0001, 0007, 0008 in detailes the field: Access auth was checked, so I executed tests and this field was unchecked. But this test wasn't successfule.
In table T77S0 I have the following settings for AUTSW:
AUTSW     ADAYS            15
AUTSW     APPRO     0
AUTSW     NNNNN     0
AUTSW     ORGIN     1
AUTSW     ORGPD     0
AUTSW     ORGXX     0
AUTSW     PERNR     1
AUTSW     VACAU
I changed them but the tests also weren't successfule.
Please, help me, where the error can be?. Now I don't know
where I can look for the solving of this problem.
I my company we have the system:
46C
SAPKE46CB0
the latest note: LCP CE 74
Thank you very much if anyone helps me.

Hello Marta,
yes, the behaviour is corret. The old one can not see the new data but the new one the old. It's like a personal file where the new manager has access to and the old only knows what was entered up to the end of his responsibility.
This litle "picture" always helps me.
Please go to:
http://service.sap.com/erp-hcm
On the left side click:
Services for mySAP ERP HCM
- Special Documentation
In the document "Authorizations in mySAP HR (4.6C)" from page 70 chapter "4.4 Process of Time Logic" describes the behaviour in detail.
Hope to help,
Michael

1487 error after moving ws object

Hello,
I'm recieving the 1487 error when trying to remote control a WS after
moving the WS object to a different container.
I've search through many posts with the same problem but nobody seems to
post a solution. Here is what I'm doing...
1. login and the WS is succesfully imported, I can then remote control it
succesfully.
2. Move the WS object to a new container.
3. Reboot the WS, now I get the 1487 error.
At this point I can see that the registry is not updated on the workstion
with it's new location.
HKLM>SOFTWARE>NOVELL>Workstation Manager>Identification>Workstation Object.
4. The workstation then re-imports itself to it's original container
defined in the import policy.
5. Now I'm unable to RC either the moved or the new WS object.
6. If I delete both the moved and new objects, reboot. It will then
re-import and can now be remote controlled again.
I'm suspecting a possible problem with the search policy. I have tried
different variations of the search policy placement and configuration but
none seem to get me any better results (mostly worse). I'm not exactly
sure how the search policy should be configured if it even is the problem.
Any help would be apreciated, thank you.
I'm running Zen7 sp1 w/ hotpatch 6.
I have nwclient 4.91sp3
I have reinstalled the zfdagent.
I have removed nmas.
I tried 4.91sp4 client, same issue.
I have enabled debug logging on the WS and Server, can't seem to find any
errors.

Jason wrote:
> Hello,
>
> I'm recieving the 1487 error when trying to remote control a WS after
> moving the WS object to a different container.
>
> I've search through many posts with the same problem but nobody seems to
> post a solution. Here is what I'm doing...
>
> 1. login and the WS is succesfully imported, I can then remote control
> it succesfully.
> 2. Move the WS object to a new container.
> 3. Reboot the WS, now I get the 1487 error.
>
> At this point I can see that the registry is not updated on the
> workstion with it's new location.
> HKLM>SOFTWARE>NOVELL>Workstation Manager>Identification>Workstation Object.
>
> 4. The workstation then re-imports itself to it's original container
> defined in the import policy.
> 5. Now I'm unable to RC either the moved or the new WS object.
> 6. If I delete both the moved and new objects, reboot. It will then
> re-import and can now be remote controlled again.
>
> I'm suspecting a possible problem with the search policy. I have tried
> different variations of the search policy placement and configuration
> but none seem to get me any better results (mostly worse). I'm not
> exactly sure how the search policy should be configured if it even is
> the problem.
>
> Any help would be apreciated, thank you.
>
> I'm running Zen7 sp1 w/ hotpatch 6.
> I have nwclient 4.91sp3 I have reinstalled the zfdagent.
> I have removed nmas.
> I tried 4.91sp4 client, same issue.
> I have enabled debug logging on the WS and Server, can't seem to find
> any errors.
>
>
What version of ZDM 7 are you running? This is usually a snapin issue
with consoleone. Where are you running ConsoleOne from?
---Kurt

Error after entering user self registration details

Hello all,
I am getting an 2 errors: after i fill the user self registration and click create. Any advice on how i can resolve this?
some times i get: "Error: Structure : No agent found."
and sometimes i get: "Error: Function call cannot be executed; parameter contains errors"
appreciate your time and help.- will give points
Arpita
Edited by: Arpita Rani on Oct 22, 2008 4:46 AM

Pls let me kow if you have resolved the issue as am facing the same issue.
rgds,
Manu

Userdata restore after moving users to new pool

Hi
I recently moved users from one Lync standard pool to another but users have lost all there contacts.
I never realised you needed to back them first before the moved users, is this now lost or can i get it back somehow?

Hi tonysolinas,
If you select Force, the user account is moved, but any associated user data is deleted (for example, conferences that the user has scheduled). If you do not select it, both the account and
the associated data are moved.
For more details,
Move users to another pool in Lync Server 2013
http://technet.microsoft.com/en-us/library/gg182600.aspx
Best regards,
Eric

Updating Phone Directory after moving users from default "users" folder

After moving any users from the default "users" folder in AD to a new OU the phone system no longer shows them in the Directory. How could I update the phone system after making changes to the AD structure?

You need to re-run the AD plugin.
And point User Search base to that new OU.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080292f6e.shtml#topic2

Errors after moving databases in SCOM 2012

I have recently moved both the Operational DB and the DataWarehouse DB from the original server to a SQL cluster. Following the guides below worked and SCOM is up and running, at least some sort of success. The problem is that it seems SCOM is trying to
contact the Operational DB on the original server even after the move.
The only events showing up in the log after the moving is 29112 and 21023
29112
OpsMgr Management Configuration Service failed to execute bootstrap work item 'ConfigurationStoreInitializeWorkItem' due to the following exception
System.Data.SqlClient.SqlException (0x80131904): Cannot open database "OperationsManager" requested by the login. The login failed.
Login failed for user 'DOMAIN\Action Account'.
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.ConnectionManagementOperation.Execute()
at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAccessOperation.ExecuteSynchronously(Int32 timeoutSeconds, WaitHandle stopWaitHandle)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.ExecuteOperationSynchronously(IDataAccessConnectedOperation operation, String operationName)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.Initialize()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.ConfigurationStoreInitializeWorkItem.ExecuteWorkItem()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.ConfigServiceEngineWorkItem.Execute()
21023
OpsMgr has no configuration for management group SCOMVIRIDIS and is requesting new configuration from the Configuration Service.
Anyone who has seen this issue before? The guides were easy to follow and i can see som 31554 and similar events after restarting the Services but soon it goes back to just logging 29112 and 21023 in the event log.
The links that i followed is listed below;
Operational Database: http://technet.microsoft.com/en-us/library/hh278848.aspx
DataWarehouse Database: http://technet.microsoft.com/en-us/library/hh268492.aspx
I´m greatful for any help!
Thanks,
Daniel
IT Consultant at Viridis IT

Problem solved.
I have been in contact with MS Support who solved the issue. What was wrong?
It seems the documentation misses an important piece. In http://technet.microsoft.com/en-us/library/hh278848.aspx under 7. there is one more value that should be edited. Under the category named "ConfigStore", make sure the "ServerName" is pointing
at the new SQL Server, otherwise the MS wont be able to receive configuration from the Operational DB.
I think the documentation will be updated with this information but I want to share this if anyone else faces the same issue.
/Daniel
IT Consultant at Viridis IT
Thx Daniel,
I had the exact same issue.
In addition to what you have suggested I also had to make sure that the new SQL server is registered with only its name - without the Instance name.
I have installed the new instance on the default MSSQLSERVER on the new SQL server.
I have documented all the procedure in my blog - including the changes you have suggested, if someone needs it its here:
Move SCOM 2012 Database to another server
yuryk

OIM Startup Error After weblogic user password change

Hello,
I'm running OIM 10g (BP15) on WLS server in clustered mode. Everything was running smoothly until -
I changed the weblogic password after going to
security realms >myrealm >Users and Groups >weblogic > Passwords:
I was able to login to WLS using new cred (weblogic/newpasswd). But OIM server startup started giving login errors as below.
I reverted back by change by setting the old password again... but the error continued....
Please suggest. I already tried putting the correct passwords in the boot.properties. But it didn't help.
Please note.. i'm successfully able to login to WLS console.. only OIM server startup is having below errors..
OIM_SERVER1.log is opened. All server side log events will be written to this file.>
<Jan 26, 2012 6:44:31 PM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
ERROR,26 Jan 2012 18:44:53,194,[XELLERATE.ACCOUNTMANAGEMENT],Class/Method: Authenticate/connect User with ID: WEBLOGIC was not found in Xellerate.
ERROR,26 Jan 2012 18:44:53,202,[XELLERATE.ACCOUNTMANAGEMENT],Class/Method: XellerateLoginModuleImpl/login encounter some problems:
com.thortech.xl.security.tcLoginException:
at com.thortech.xl.security.tcLoginExceptionUtil.createException(tcLoginExceptionUtil.java:96)
at com.thortech.xl.security.tcLoginExceptionUtil.createException(tcLoginExceptionUtil.java:53)
at com.thortech.xl.security.Authenticate.connect(Authenticate.java:152)
at com.thortech.xl.security.Authenticate.connect(Authenticate.java:71)
at com.thortech.xl.security.wl.XellerateLoginModuleImpl.login(XellerateLoginModuleImpl.java:159)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy22.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy40.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Jan 26, 2012 6:44:53 PM PST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Jan 26, 2012 6:44:53 PM PST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
>
<Jan 26, 2012 6:44:53 PM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jan 26, 2012 6:44:53 PM PST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jan 26, 2012 6:44:53 PM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Thanks,

Got the solution :
1.     Log on to the WebLogic Server Administration Console.
2.     Click the domain name for the Managed Server.
3.     Click View Domain-wide security settings.
4.     Click the Embedded LDAP tab.
5.     Select the Refresh replica at startup option, and then click Apply.

Having a problem with the photos showing up after moving everything to another server.

Greetings,
I used an older version of iWeb to create several websites a few years back, and would like to retain them. I followed the instructions and downloaded the five folders for the five websites on my iDisk, which took more than two hours, and then uploaded them to the server I use to host another of my websites, and made them all subdomains.
The first issue I had was a php code error for every page. Turns out I had to remove the very first part of the index.html file: <?xml version="1.0" encoding="UTF-8"?> and then everything seemed fine until I tried to go to another page. Ended up having to do this on every html page for each website.
Then I noticed that none of the pictures were showing up in the albums. I also have videos on two of the sites, and they worked fine. I checked /Photo_Albums/Pages, and inside were the folders with all the pictures, so I know they're there.
I have ruled out it having anything to do with my new server by opening the websites in Safari from their folders on my desktop, and had the same results; everything was good except there were no pictures on the page.
If anyone can help me with this I would really appreciate it! I've got 5 websites I have to get fixed in two days.
Thanks!
Take care,
~Chris

Thanks Roddy, but I don't think that's it, either. When I downloaded everything from my iDisk, it automatically created 3 versions of every picture, and named them either micro.jpg, thumb.jpg, or web.jpg. They can be found in the Photo_files>Media folder, each set of three in their own uniquely numbered folder. For example, one the websites is of a friend of mines hot rod Fiero.
Here is his website via iWeb:
http://jimsfiero.com/
This is what it looks like after uploading everything to a different server:
http://jimsfiero.ricehatersclub.com/
Here's my personal website:
http://peckerwoodspitstop.com/
And here it is after uploading everything:
http://peckerwoodspitstop.ricehatersclub.com/
You can see that everything works, except where the page is a photo album.
Thoughts?
Oh, BTW, I tried Wyodor's suggestion, and it shut everything down with a 500 Internal Server Error. Removing the suggested file corrected everything.

Oracle TNS 12535 error after moving repository DB from Win NT to Win 2K

Business Objects 5.1
We have recently moved an Oracle database from Windows NT to Windows 2000. One particular user keeps on getting ORA-12535: TNS: operation timed out.
What could be causing this?
The user can run SQL*Plus and connect to the database without any problems.
The user gets this error when running BO itself. When running our Application or any other Oracle tool or utility (TOAD, SQL*Plus), etc, then all works fine.
From my own PC I can use the 'problem' users BO login to connect to the repository.
So the nature of the problem suggests a network or configuration issue of some kind. We have limited BO expertise at this site.
Please can someone advise?
regards,
MK

Hi Mo,
If the previous solution provided doesnu2019t works then check the following things:
1. Check the ORACLE_HOME value in the Registry and ensure that your PC has only one "ociw32.dll" file.
2. Confirm that the PATH environment variable definition's first Oracle /bin folder path points to the middleware
installation you intend Supervisor to use.
3. Add the repository database server's IP address to the local HOSTS file.
4. Confirm the repository database's entry in the Oracle TNSNames.ora file.
Regards,
Sarbhjeet Kaur

D101 Error after moving a GW Resource

Hi, I've seen a few posts on D101 errors, but none seem to fit my circumstances. I have a resource "Dept Calendar" owned by USERA on POA. Everything works fine. Other users can proxy to the calendar with no problems - everyone is happy. USERA then leaves the department. I moved the resource to POB and give ownership to USERB (who previously had r/w proxy access). USERA is removed from the proxy list. Now, whenever USERB opens an appointment that USERA had entered, she gets a "D101" error with the calendar appointment referencing POA. The D101 makes sense, sort of, because the resource is no longer on POA. But why?
Our GW is 7.0.4 on both server and clients. I ran an analyze/fix on the resource but it came back with no errors.
This is a new one for me. Any ideas?
Thanks,
Jeff

JeffreyESmith,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Mail folders after moving user to LDAP from Local

I originally setup our server with Local users, rather than LDAP. Now, we need to move everyone over (for a variety of reasons). I'm basically doing the following for each user:
Export individual Mail/Contacts/Calendars
Turn off Mail/Calendars/Contacts in Server app
Delete Local User
Create LDAP user with the same UserID in Workgroup Manager
Check all services for the user under User Access in Server app
Turn on Mail/Calendars/Contacts
Import individual Mail/Contacts/Calendars back into the apps on the client machine
This works up until I try to reimport emails. I get the error that the "mailbox already exists". This makes me think it's associating the userID with the old email folder on the Server. The problem is I don't know how to either reassociate the user with their old emails, or to remove them. Any help is appreciated, thanks!

Here is what happened:
Original User's Document files were NOT stored under the User Name as they should have been. The User Name doc file was almost empty. (Nov 2007 thru Aug 1 2008). The main Documents folder was located in the Macintosh HD folder (not in User folder).
User Name Account got corrupt and new User Name had to be created. The Documents Folder was moved to this Account. (Aug 1, 2008)
Time Machine was not backing up the iMac because the New User had to set up TM. On Aug 4, 2008, TM was turned on and began backing up the computer AGAIN (thus process took several hours).
My solution is:
Delete the old back-up file (+600GB) and re-back-up iMac. Keychain from the old user will remain intact and there would only be ONE copy of Documents folder in the backup (along with the incremental backups).
Would this work? Is there a way to remove back-ups prior to Aug4? How can I control TM so it doesn't consume my HD? I use this drive to store iTunes and iPhoto/Aperture libraries.
Thanks

Help with C03 error after moving!

I need some advice and help in what to do with my BT Vision.
I moved home about 1 week and a half ago and moved all my BT services to the new address. The new phone number is working fine and the broadband is now also working well, with no problems. However my BT Vision box doesn't work at all. When turned on it shows a C03 Error and says I need to wait for the activation date? Not sure what this means as I thought that as soon as broadband was working Vision would work.
At the weekend I called the helpline and the operator told me (after periods of long waits and apologies) that vision had been transfered to new line and he had to "escalate" the query as he was unable to resolve. Someone was supposed to call me in 24hr but no one did. I rebooted the hub and the box countless time already and same message appears.
I've been with BT for some years now and always have good service when things are set so keen to resolve this so I can keep on enjoying it. My partner is talking about getting Sky but I'm not so sure.
I have a old grey BT Vision Box and the black Hub, if that info helps!! Thank you for any help and advice you can give. Not sure what I can do more.

Hello,
Your account hasnt been activated and QoS wont have been applied to your line.
Only thing you can do is send the mods and email:- http://bt.custhelp.com/app/contact_email/c/4951
Make sure you include your account number, name, address and details of the problem. They'll get it sorted in around 1 week and credit you for lost service.

Error after moved jxl.jar library

Dear All,
I've a requirement to import data to db table from excel file. I followed the below link
https://blogs.oracle.com/prajkumar/entry/importing_data_from_excel_sheet
I moved all the class and xml files and registered in apss (OAFramework version 12.1.1).
My page is working fine in local but after deployed to the server i got the following error if i click the go button.
Error
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.classloader.util.AnnotatedNoClassDefFoundError, msg= Missing class: jxl.Workbook Dependent class: xxerp.oracle.apps.xxerp.uploadso.server.SaleOrderUploadAMImpl Loader: oacore.root:0.0.0 Code-Source: /d02/oracle/VIS/apps/apps_st/comn/java/classes/ Configuration: <library> in /d02/oracle/VIS/apps/apps_st/comn/webapps/oacore/ The missing class is not available from any code-source or loader in the system.;
I added the below in orion-applications.xml
<library path="/d02/oracle/VIS/apps/apps_st/comn/java/classes/xxerp/libraries/library_so_upload/jxl.jar" />
Thanks in advance,
SAN

Hi all,
After lot of googling, I found a metalink having solution for this.
Metalink ID 433241.1
After followed this doc my prob has been resolved.
Thanks,
SAN

Submit button doesn't work after moving form to another parent container

I'm re-arranging the page using jquery. When I moved a div or table containing a form to another div, the submit button doesn't work anymore. Using the emulation mode under the Inspect Element feature of IE, the same code works for IE9 but not under IE10
and up.
Any ideas?

I will steal the answer that George gave to a similar question, because it turns out it is applicable here as well:
George Johnson on Feb 23, 2012 11:17 AM
When you distribute a form, it replaces the email address that you've set up in a submit button with the email address you have specified in "Edit > Preferences > Identity > Email Address". So before you initiate the Distribute Form process, change the email address there to the one you want to use.
It is a ridiculous solution, because it means I have to make the identity of my personal copy of Acrobat the email address of someone else or some other department when I make the form, but whatever -- at least the form sends now.

Error after moving user to another organiz.l unit (Edir)

Similar Messages

Maybe you are looking for