Error after opening of photos with cs3  10.0.1

hello,
I updated my Photoshop to CS3 with the design packet.
Every program runs without problems, exept for Photoshop.
I open PS and everything functions correctly, but if I open a new picture or photo, I get the messege:
AppName: photoshop.exe AppVer:10.0.0 ModName: e_fuicabe.dll
Execution Information
Code: 0x0000005 Flags:0x0000000
Record: 0x00000000000000000 Adress: 0x0000000068f052a5
Can anybody help me? What I can do to fix the problem?
I work with Win XP; more than 1GB RAM, and I downloaded the update from 10.0.1 .

german photoshop?
try this thread:
http://xrl.us/bgj79 (Link to www.psd-tutorials.de)
only mention of a dll by that name i could find. that's not an english lang version. the thread mentions a fix, but i couldn't understand it. maybe you can...
google translation:
http://xrl.us/bgj77 (Link to translate.google.com)

Similar Messages

  • When I open a photo with Preview, it opens all the photos I have viewed previously.  How can I prevent that, other than manually clearing the list after each time?

    When I open a photo with Preview, it opens all the photos I have viewed previously.  How can I prevent that, other than manually clearing the list after each time?

    Close the pictures before you quit Preview. Cmd-opt-q will close all windows and quit. cmd-opt-w will close all windows and not quit.
    Or, Disable automatically opening files that were left open in General System Preferences

  • I'm getting this error after I edit photos 'nothing was imported. What is causing this?

    I'm getting this error after I edit photos 'nothing was imported. the files or folder selected to import did not contain any supported file types, or files are already in this catalog.I have elements 13 using hp windows 8 laptop and never had this happen before.

    Hello staceonbass,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Restrictions Error after opening Acrobat

    Hello all,
    I'm having a problem with Acrobat version 11.0.06. This issue only happens with our Windows 7 computers in our server 2003 AD domain.
    I keep getting this error: Restrictions “This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator". I get this error after opening a PDF (the PDF opens completely).  Acrobat License has already been accepted as well.
    We have a GP set “Run only allowed Windows Applications".
    I’ve added: AcroRd32. e-x-e and armsvc. e-x-e to the list.  Am I missing something? Could this be the cause of the error or do I need to add something else?

    Is the save as PDF that you mention the MS plugin in Excel or the Acrobat macro? What happens if you try to print to the Adobe PDF printer? What OS version, office version, and version of Acrobat?

  • How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

    This is a guide to repair projects that get a "TickTime.cpp-290" error after opening a specific project.
    Prerequisites:
    Project repair tool (download link below)
    WinRAR or any file archiver
    Damaged project file
    As an example, let's say the name of my damaged project is 'test.prproj'
    Steps:
    1. Download the project repair tool here: https://www.dropbox.com/s/3fyja0ws7l5gkbt/pp-repair-0.1.35.zip?dl=0
    2. Rename your project file extension from 'test.prproj' to 'test.zip' (a warning appears saying the file might become unusable. Do not be concerned about the warning. Click OK and move to the next step.)
    3. Extract the contents of 'test.zip' to a location on your computer. (Right click on the file and select ‘Extract files’ > Choose a location > Click OK).
    4. Go to the extracted location. Note the file 'test' has no extension.
    5. Rename the file, 'test.prproj'.
    6. Launch the project repair tool, and then select the file 'test.prproj' (the one that we renamed in the last step).
    7. Deselect all the check-boxes in the project repair tool.
    8. Click the Repair button.
    9. After a few seconds you see a message saying 'Success'.
    10. Open the repaired file in Premiere Pro and then reset the workspace. Choose Window > Workspace > Reset Current Workspace.
    11. Click the Save button to reduce the project size.
    12. Your project is now repaired.
    NOTE: If a file containing letters such as ã, å, ê, í, ú don’t repair, rename the file to something that doesn't contain these letters.

    Hi Rameez,
    first of all thanks a bunch for the tool - it saved our neck this morning on a tight deadline.
    One minor note: I did get a message that the (already uncompressed + renamed) file is not uncompressed until I ran the tool as Administrator so you might want to add that to the FAQ entry...
    Other than that I'm very much interested in what triggers this bug so we can potentially prevent it.
    Background:
    Specs: Windows 8.1, German locale (ie comma is decimal symbol), Premiere Pro CC 2014.2 installed in English
    My colleague who ran into the TickTime.cpp-290 error remembers having created a new workspace while working on the project. That seems to have triggered the issue as we haven't had any trouble on other projects yet. It also got saved into the project file:
    <MZ.Project.WorkspaceName>Bearbeitung</MZ.Project.WorkspaceName>
    Any autosaves after he added the workspace were corrupted as well while the ones dating back to earlier still open fine.
    I'd like to mention that Premiere did import previous (German language) workspaces - dating back until CS5. Not sure if that comes into play.
    On the other hand, the debug log looks like there only is an issue with the decimal symbol:
    10:08:06: Input: C:/temp/trouble/uncompressed/final.prproj
    10:08:06: Path: C:/temp/trouble/uncompressed Basename: final Extension:prproj
    10:08:06: 19852-> from: <PlaybackSpeed>0,069148936170212769</PlaybackSpeed>
    10:08:06: 19852-> to:   <PlaybackSpeed>0.069148936170212769</PlaybackSpeed>
    10:08:06: 23970-> from: <PlaybackSpeed>0,0062741915889604422</PlaybackSpeed>
    10:08:06: 23970-> to:   <PlaybackSpeed>0.0062741915889604422</PlaybackSpeed>
    I really need to make sure that this is no general problem with German locales as we have multiple users on this kind of config and can't afford projects breaking.
    Or do we "just" need to watch out to get rid of the old workspaces? I'm a little puzzled to be honest.
    Maybe it helps to mention that we are on CC Enterprise
    Best regards,
    Mike

  • As soon as I open a photo with Preview part of the photo turns black

    As soon as I open a photo with Preview, part of the photo turns black.  Just started doing this.

    Complain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
    First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
    Can you?
    You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
    What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
    Verizon although with the best coverage is also the highest priced.
    Good Luck

  • Simplify recovery after opening the database with the RESETLOGS option

    Hi All,
    I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
    *"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
    As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
    Kindly correct me if i am wrong
    Thanks in advance

    vk82 wrote:
    Hi All,
    I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
    *"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
    As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
    Kindly correct me if i am wrong
    Thanks in advanceyou are correct so you can mark this thread as answered
    Handle:     vk82
    Status Level:     Newbie (35)
    Registered:     Nov 21, 2010
    Total Posts:     733
    Total Questions:     180 (115 unresolved)

  • Error WUC-14 after open a File with CLIENT_TEXT_IO.FOPEN (Oracle 10g)

    Hi,
    the error WUC-14 occurs during open a file with forms10g.
    F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w');
    Afterwards the error message it ist possible to write into the file and close it correctyl (without am error message - also the Information is correkt).
    During debugging the error occurs in the function GETPROPERTY (Webutil).
    the error occurs only sometimes.
    Can anybody help me to solve the problem ?
    best regards,
    Alexandra Schermann

    Hi Alexandra,
    You can catch the exception in Exceptions part and close the file. Something like,
    DECLARE
    F_VersandZahlen CLIENT_TEXT_IO.FILE_TYPE;
    BEGIN
    F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w');
    <do your processing>
    EXCEPTION
      WHEN OTHERS THEN
       CLIENT_TEXT_IO.FCLOSE(F_VersandZahlen);
    END;-Arun

  • Error when opening =any= PDF with Reader

    Hi!  Since installing the new Reader software, I keep getting the same error message whenever I try to open =any= PDF, from those on my system for some time to those just downloaded.
    The error message says:
    Attempt to access invalid address
    I can open any PDF with Sumatra or Foxit, so it's not in the file...
    Bruce

    Hi  Bruce,
    Are you using EMET Antivirus? I have seen the issue caused due to this. Try disabling it and  check.
    I have seen this issue fixed for some users by modifying the following registry key:
    The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
    Set the key to 1 instead of 0 then reboot the machine.
    In case you still face the issue try the following registry key change:
    The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
    BEFORE:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
    AFTER:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
    Note: Please take a backup of the registry before attempting this change.
    Regards,
    Rave

  • Error in opening a file with name in chinese characters with Runtime.exec

    The issue at hand is when I try to open a file with file name containing chinese characters in a localized environment in Windows through the following java code:
    Runtime.exec("rundll32 SHELL32.DLL,ShellExec_RunDLL {File_With_FileName_containing_Chinese_character}");
    the following error is thrown by windows.
    Cannot open file "C:\??.txt".
    with the exception
    java.io.IOException: CreateProcess: [Ljava.lang.String;@f5da06 error=2
            at java.lang.Win32Process.create(Native Method)
            at java.lang.Win32Process.<init>(Win32Process.java:66)
            at java.lang.Runtime.execInternal(Native Method)
            at java.lang.Runtime.exec(Runtime.java:566)
            at java.lang.Runtime.exec(Runtime.java:428)
            at java.lang.Runtime.exec(Runtime.java:364)
            at java.lang.Runtime.exec(Runtime.java:326)
            at Launcher.main(Launcher.java:26)
    When I try to use the same command (shown below) from the Windows Run command, the file opens sucessfully
    rundll32 SHELL32.DLL,ShellExec_RunDLL {File_With_FileName_containing_Chinese_character}
    Please suggest.
    Thanks in advance

    This may be a file association problem.  To solve that:
    In Windows 7:
    1. Right-click the file,
    2. Select "Open With" 
    select [Your Program Here]
    3. Check always use this program. 
    In Windows XP:
    1. Locate the file as you have described above
    2. Right click the file
    3. Select Open with from the pop-up menu
    4. Click Choose default program…
    5. Select Excel in the Recommended Programs box
    6. Check Always use the selected program to open this kind of file
    7. Click on OK.
    1.  Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
    2. Take a registry backup using the steps given here
    3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
    4. Exit Registry Editor
    5. Undo Step 1 to make Excel available.
    6.  Restart the computer and verify it the issue is fixed.
    If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

  • Error while opening excel integration with sap

    Hi
    While view planning with excel integration in SAP, I am getting error. I am getting this error in CCA and COPA also.
    Can anybody help me how to resolve the issue. Please see the meessage
    Error while opening document
    Message no. SOFFICEINTEGRATION143
    Diagnosis
    An error occurred in the desktop application while opening a document.
    Procedure
    Check first whether you can insert a document from this desktop application as an embedded object in another application. The necessary menu item is usually 'Insert --> Object'. The application then lists all of the OLE document types. Choose the type corresponding to the desktop applciation. If the insertion fails, the error is in the desktop application itself.
    This error has various causes. Often, it is caused by activating certain add-ins. Sometimes, the desktop application is wrongly installed. The error should not recur once you have disabled any add-ins or reinstalled the desktop application.
    Procedure for System Administration
    If you cannot solve the problem as described above, enter a problem message. There are notes relating to how to generate the log file using the program SAPROFFICEINTEGRATIONTRACE.
    Regards
    Sekhar Datta

    Hi ,
    I think you are using older version,use microsoft excel 2007 version,then it will opens.
    Regrads,
    SVS
    Edited by: svskumar on Aug 19, 2010 12:18 PM

  • Error when opening a workbook with mandatory variables

    BEx analyzer displays an error message window in the same time as the variable popup window.
    The worbook is linked to 1 query that uses 2 mandatory variables (month ?, year ?), and was defined in the test system.
    I assume that values are thus saved within the workbbok.
    The developper had 0bi_all autorisation.
    When a reporting user is opening it (also in the test system), the error message is displayed.
    This happens only the 1st time when Analyzer is started, and by clicking on the OK button, we are able to run the query.
    The next workbook refresh runs without the error message display.
    Question =  does anybody know the reason of this, and how to avoid the error message ?
    more infos:
    error message E019(R9E) appears for each variable (thus, 2 time with a query with 2 variables):
    Help type 5 is not valid for the platform NONE
    Exception 5 occured while calling IWB_HTML_HELP_URL_GET
    the details of this error message is:
    Diagnosis
       You tried to start the online help with help type on platform. Help type is not supported on this platform.
    System Response
       Profile parameter eu/iwb/help_type must contain a valid help type.
    Diagnosis
       The documentation is not correctly connected to the BI server.
    System Response
       The documentation cannot be displayed.

    i checked the query and authorisation with RSRV, but this didn't help, furthermore, a lot a functions are not implemented in the system, sorry.
    i also changed the query and workbook, and i think that it depends on the workbook release 3.x or 7.
    imagine following situations: same query 7.0, same workbook 7.0
    with BI7
    1) opening the query with variables doesn't display the error message
    2) refreshing the workbook with the query with variables displays the error message (only for a non mandatory variable - as soon as there is a variable, the error message is displayed)
    3) refreshing the workbook with the query without variables doesn't display the error message
    with BW 3.x
    4) refreshing a new workbook 3.x with the query with variables doesn't display the error message
    i also investigate in the function modules for workbooks (RS...), but nothing helped.
    i still think that it is linked to authorisations, because with sap_all, the message isn't displayed.
    how can i continue ?
    Edited by: Claire Mignerey on Mar 17, 2009 2:37 PM

  • FRM-18108 Error when opening a form with subclassed objects

    Dear Group,
    I have 2 forms in Oracle Forms 6i. One of the forms contains an object group. The other form contains the object that I subclassed it to.
    When I open the form that contains the subclassed object group, I get the FRM-18108 error.
    If I open the form with the original object group, then open the subclassed form, there is no error.
    Does this mean I must always open the original form in order to work on the one with the subclassed object group?
    I hope there is an simple solution to what is something I am missing in my Oracle Forms setup.
    Thank you in advance.
    Emad

    Hi Duncan.
    Your suggestion worked.
    Thank you for the fast response!
    Truly,
    Emad

  • Error when opening the database with resetlogs

    ORA-00603: ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
    WHEN I open the database with RESETLOGS

    Well you definitely need to post more information here.
    Looking at what you have posted, all that I can reply is
    ORA-00603: ORACLE server session terminated by fatal error
    Cause: An ORACLE server session is in an unrecoverable state.
    Action: Login to ORACLE again so a new server session will be created

  • How do I open a photo in CS3 as a RAW file from Aperture

    How do I open a photo from the Aperture library in Photoshop CS3 so it opens in the RAW converter first, as it would if I opened it from bridge? I can only see options for TIFF and PSD.
    Thanks and regards,
    Craig

    You could import your RAW-files as referenced images into aperture. This way your Raw-files would live in a folder structure on one or more harddrives. Third party applications like Photoshop would have access to your files too. You could implement a DAM strategy like Peter Krogh´s (http://www.peterkrogh.com/).
    Disadvantage: you would be responsible for a thorough organisation of your files (raws and derivatives).
    Regards, Eberhard

Maybe you are looking for