Error after service pack upgrade

Hi,
Recently I upgraded solution manager system to SP13 from SP10 . After the upgrade I am not able to create message through notif_create transaction . The error message is
No, or insufficient, authorization for authorization object "B_NOTIF_IB"
I have SAP_ALL and SAP_NEW profile in my user .
Also I am not able to create message through
Help--> create support message , it is showing message is incomplete . But I am able to send message from satellite system to solution manager .
Pl suggest
Pl suggest
Thanks
Ajeesh
Edited by: Ajeesh S on Dec 18, 2007 8:20 AM

Dear ,
What entries shuld ne in table
thanks

Similar Messages

Workflow errors after service pack upgrade

Hi all,
We have a problem with workflows after service pack upgrade. Workflows are working fine in Development system but not on test and production. Generating lot of dumps.
What could be the reason for this ?
'Start verification workflow' in SWU3 is giving error 'Workflow: No workflow definition found'.
Thanks in advance

Getting series of short dumps 'CALL_FUNCTION_REMOTE_ERROR'
Error while calling '
call function 'RH_GET_WFD_ID' destination 'NONE''
But RFC destinations are working fine.

PC Failed after service pack upgrade

Hi experts,
Our BI system is recently upgraded to the service pack 23.
After this we executed our process chain.
But the PC failed at the step infopackage ( ODS to Infocube ) with the error message
======================================
Error generating program
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template:   RSTMPL80
Error code: 6
Row:        47
Message:    Field "/BIC/CCVA8ZECPCO02" is unknown. It is neith
Procedure
Correct the template to remove the problem.
======================================
Can anyone please through a light on this.
Regards,
Bhadri M.

Hi,
Run the RSRV check for the DSO. It will fail. Correct the error from there it will fix the issue. The template at backend has changed since the older versions.
-Vikram

Mail attachment problem after service pack upgrade from 11 to 17 ECC 6.0

Dear All,
My mailing programs have started sending .dat file instead of .xls file. Earlier it used to go properly in .xls format.
I'm using SO_NEW_DOCUMENT_ATT_SEND_API1 fm for mailing.
Thanks.
Edited by: User on Mar 7, 2011 12:37 PM

After 6.10 and higher version, SAP recommends not to use the FM SO_NEW_DOCUMENT_ATT_SEND_API1. The issue could be because of that. check with the SAP note 190699

IQ770 crashed after service pack 1 automatic update.

after service pack one was downloaded ,while on line i would get kicked off.eventually windows wouldnt boot up,and then received a blue screen with an error message saying windows has shut down to prevent further damage to the computer.then the computer would only boot up in safe mode.i tried system restore in safe mode,but it did not work.i called hp technical support. they told me i need to do a system recovery.i tried a system recovery through the hard drive, it went through the whole process,and i thought it was going to work,but when it was time for windows to boot up the computer froze.the tech said i need to purchase a recovery cd and it should work.i ordered it and i followed the directions and ran the cd.when the disc was complete the screen was white,and there was no response of any kind.then after a few hours i shut the computer off.when i turned it back on there was nothing but a screen with vertical colored lines,and no response.i have had the computer for 14 months when this happened.i don't know what to do? has this happened to anyone els?

hi, ive got almost the same problem. I just haven't followed through on the back-up as far as you have. good thing, it looks like. I've almost filled my hard drive, now going on 19mos later. i wish i could help. my video is fine, i think. ive ran every free malware, virus, defender and anti spyware prog i could find for this. and got rid of a lot of supposed threats. but the problems get worse and worse. lately i cant get my hardware to work right. seems one thing after another one piece or another seems to go out. weird thing is: the drivers say they are totally updated just for some reason not working and needs to go online but wireless and ethernet both have "hardware connection errors" so i cant get the sucker online. then my system speakers are out. ive tried uninstalling, disabnling, updating via sd card and hp and microsofts sites (all the trials and errors not necessarily in chronological order) but i dont know what to do. winlogon shuts off, oembios shuts off, now i look over and windows explorer keeps going out aaaaaaarrrrrrgh, i dont have that much money to get new warranty. <text deleted> since i cant get online with mine its not up to me when i can check my email. but if someone wants to try and troubleshoot this with me via messenger if im on or email id really appreciate it. im at a loss cuz im normaly the it tech to go to for vista, but now im lost and would really appreciate any and all info or idea...even if ive tried it, maybe my sequencing was off and im willing to retry ....thanks
Message Edited by WendyM on 08-24-2009 08:13 AM

BI Activities in Service Pack Upgrade

Hi,
We are upgrading all the systems to the next service pack. Presently BI is on Netweaver Stack 12 and application stack 14. Basis is planning to upgrade the Netweaver stack to 17 and application stack to 19. As part of this upgrade project they would need the activities which can be planned from BI side. Can any one help me to identify the activities need to be planned from BI side during and after the service pack upgrade. Based on this I would need to prepare the estimates for the activities.
Regards
Vijay

No you don't need to stop SQL Services before patching, but you may be required to restart SQL after a patch has been applied for changes to take effect.
SP installation checks for locked files, it would suggest to stop identified services manually.
You don't need to do before hand.

Impact of enhancing standard infotypes on service pack upgrade

Hi SAP experts,
I have a situation where in we had enhanced standard infotype 14 ( added custom fields to structure CI_P0014) in development systems and moved to production systems. Now these changes should be moved to project system in which the service pack upgrade is in progress. Will it impact the SP upgrade if I move my transports to these systems? Will it overwrite the sp changes for IT14?
P.S : The support pack was not applied to the system in which the std infotype was enhanced.
Regards,
Sameena

You should re-apply any customer enhancements etc to your development environment after SP's are applied - But only after you have a developer review potential impacts from SP and your development.
I think you would be fine as IT14 isn't updated often in SP's.
Cheers,
Brad

AveConnect driver error after SQL Server service pack upgrade

I am currently testing aveConnect 3.0 (connection optimized) for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.
java.sql.SQLException: [Avenir][JDBC SQL Server Driver] Connection refused: connect
I also tested it with the older version of AveConnect (2.2) which we've been using until recently,and it returned the same error.
I am currently testing aveConnect 3.0 for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.If anyonecould provide any advice I would be very grateful,as this is pretty urgent.

Hi,
I just contacted the driver vendor (Atinav Inc).heard that aveconnect jdbc driver is now updated to work with latest SQL server fixes from microsoft.
FYI, aveconnect jdbc driver link http://www.atinav.com/products/aveconnect/aveconnect.htm
HTH,
-ashraff.

Sites Intermittently Not Responding After Service Pack 2

Got a strange intermittent issue occurring after we upgraded our SharePoint 2010 farm to Service Pack 2.
The upgrade was successful on all of our servers with no errors and generally performance is a little quicker as should be expected. However we have an intermittent issue where some site collections within the main web application become unresponsive.
We have 2 front end servers sitting behind a network load balancer.
All sites have a dedicated content database.
The issue occurs on either front end server.
An app pool recycle fixes the issue until it occurs again, however we can't go recycling app pools constantly during business hours as we have around 3000 users connecting to our SharePoint portal.
ULS logs and event logs don't show anything abnormal really (however just dialled up the logging to verbose to look into it further).
Any suggestions?

Hi,
By default, the application pool is set to recycle at a specific time automatically in IIS.
So the issue you met may be due to the application pool cannot be recycled automatically or the recycle was crashed.
I recommend to check IIS log for SharePoint web application and
System event logs on the IIS server for the corresponding web application to see the error message.
http://blog.bugrapostaci.com/2012/04/12/how-to-collect-iis-logs-for-a-sharepoint-web-application/
http://blogs.msdn.com/b/benjaminperkins/archive/2013/07/01/troubleshooting-badly-behaving-iis-application-pools.aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Crystal Reports 2008 Error Installing Service Pack 1

Hello,
I am trying to install Service Pack 1 for Crystal Reports 2008 on Windows 2008 Server as an adminstrator and I get the following error message:
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a fold containing the installation package "CrystalReports.msi" in the box below."
Also, I have been unable to complete the registration wizard because I do not get a 10-digit registration number when I complete the registration process at www.sap.com/solutions/sap-crystal-solutions/productregistration . I don't know if this problem might be causing the Service Pack 1 to not install.
Thanks,
Michele

Hi Michele,
Windows 2008 is not officially supported yet but it is for Vista and Windows 7 after SP 2.
To get it to work uninstall first, make sure you keep your keycode and then download SP 3 full build:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
Then it should work.
Thank you
Don

After Service Pack 2 update sound stopped working

Recently started again with my Satellite laptop. All was good and everything worked perfectly until i download Service pack 2. Ever since doing that the audio has stopped working.
I'm a bit novice but have tried the following:
I uninstalled the driver and downloaded the appropriate drivers from the Realtek website. reinstalled but still get the same problem. no error messages but just "Driver is enabled but has not been started" in the properties screen for the sound and device properties.
Can anyone offer a solution?

Hi
Youre right. I have read that on some notebooks the sound doesnt work after XP SP2 installation.
But the update instillation should help.
Could you please post you notebook name?
At this page you will find a list of Windows XP Service Pack 2 supported models:
http://support.toshiba-tro.de/kb0/FAQ5300V6000DR01.htm

Tx2510us - Fingerprint Reader Not Detected after Service Pack 1 for Windows 7 installed

Have had Windows 7 32-Bit installed and running fine since early last year.. Today Windows Update installed Service Pack 1.
Now, the fingerprint reader (AuthenTec AES1610) is not detected. Digital Persona reported the fingerprint reader isn't connected and the Device Manager shows installed and working properly.. When the computer boots, the logon screen shows not detected..
Have seen several older posts that reference a page with a fix for AuthenTec/Digital Persona, but get a 403 error when trying to access..
Hoping someone still has this info, or possibly there's a new fix to work with Service Pack 1..
Thanks
~~~~ Nothings forgotten. Nothing is ever forgotten. ~~~~

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue

Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!

Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Service pack upgrade

Hi Experts,
while upgrading sql server with the latest service pack, what is the best approach? do we required to stop sql server and upgrade?
as per my understanding, we need to make sure sql server is up and running while patching. when there is a discussion happend with one of my managers, they do patching for they applications (related to dot net. not sql server), they turnoff all apps, and
then do upgrade. we never do like this, but i really dont know even this is best practice for sql server. i did not see any document on this.
please could you suggest on this?
thanks in advance.
Cheers, Vinod Mallolu

No you don't need to stop SQL Services before patching, but you may be required to restart SQL after a patch has been applied for changes to take effect.
SP installation checks for locked files, it would suggest to stop identified services manually.
You don't need to do before hand.

Error after update : "Method 'Upgrade' does not have an implementation"

Hello,
After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation.
And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
Any idea ?
Thanks in advance for your answer.
Mike

Hi Mike,
If you are using SharePoint 2013 Server edition, please re-download the
SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
issue you can take a look.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
Thanks
Daniel Yang
TechNet Community Support

Error after service pack upgrade

Similar Messages

Maybe you are looking for