Error after SP02 Pack
Hi all,
After Sp02 pack, only one user not able to see details in content area after logging into EP portal..what would be the possible error
Hi,
Check the browser version, the user uses.
Try to clear the cache and history and offline content from Internet Options in Internet Explorer and ask the user to run the application again.
Let us know if this information is useful to you.
with regards,
Parin Hariyani
Similar Messages
-
STMS error after language pack
Hi
after language pack updated i am getting transport error please do the needfull
thanksThe "needful" thing would be to post the error message in detail and telling what exactly you did and what error arises when.
Markus -
Workflow errors after service pack upgrade
Hi all,
We have a problem with workflows after service pack upgrade. Workflows are working fine in Development system but not on test and production. Generating lot of dumps.
What could be the reason for this ?
'Start verification workflow' in SWU3 is giving error 'Workflow: No workflow definition found'.
Thanks in advanceGetting series of short dumps 'CALL_FUNCTION_REMOTE_ERROR'
Error while calling '
call function 'RH_GET_WFD_ID' destination 'NONE''
But RFC destinations are working fine. -
Error after HU packing in Outbound Delivery
Hello All,
I unpack existing Handling Unit (HU) in an outbound delivery in VL02n transaction and pack part of its quantity in new HU that I create on same screen. Now, while saving this delivery I get this error "Movement type 990 does not allow immediate confirmation". Even when I delete existing HU nd pack all its content in new one I get the same message while saving the delivery.
Surprisingly for the same packing material and packed material in another outbound delivery I can do this operation without any error message.
What can be the possible reason for this. Please help me out.
Thanks,
Amit GN/A
-
Error after service pack upgrade
Hi,
Recently I upgraded solution manager system to SP13 from SP10 . After the upgrade I am not able to create message through notif_create transaction . The error message is
No, or insufficient, authorization for authorization object "B_NOTIF_IB"
I have SAP_ALL and SAP_NEW profile in my user .
Also I am not able to create message through
Help--> create support message , it is showing message is incomplete . But I am able to send message from satellite system to solution manager .
Pl suggest
Pl suggest
Thanks
Ajeesh
Edited by: Ajeesh S on Dec 18, 2007 8:20 AMDear ,
What entries shuld ne in table
thanks -
IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)
Does any experience this problem after updating to ZCM11sp1?
I keep getting IE8 unsupported error after updating to ZCM 11 Support
Pack 1 (11.1) although I am running on IE8 already. Now remote
management is not working because of this incompatible browser errors. I
tried this following
link:http://www.novell.com/support/viewCo...9158&sliceId=1
But it does not help.
Any suggestion or idea would be greatly appreciated!!!On 8/29/2011 8:26 AM, craig wilson wrote:
> Double Check all of your settings there, including the option to view
> Intranet sites in compatibility mode.
>
> For some reason, your IE8 is reporting itself as IE7 and running in IE7
> mode which is no longer supported.
>
> On 8/29/2011 9:17 AM, April wrote:
>> Does any experience this problem after updating to ZCM11sp1?
>>
>> I keep getting IE8 unsupported error after updating to ZCM 11 Support
>> Pack 1 (11.1) although I am running on IE8 already. Now remote
>> management is not working because of this incompatible browser errors. I
>> tried this following
>> link:http://www.novell.com/support/viewCo...9158&sliceId=1
>>
>>
>>
>> But it does not help.
>>
>> Any suggestion or idea would be greatly appreciated!!!
>
>
Thank you for your responding. I have already checked to view Internet
sites in compatibility mode with no luck. I tried several different
computers with IE8 but they all got the same problem. -
Program terminated error after entering sold to party no. in sales order
hello friends,
can any help me, i was doing the topic of user exit for pre-defined sold to party using v45a0002 in cmod and i wrote a program for include 'if sy-uname= 'sapuser'.
message e000(0) with ' you are not authorised to create so'
endif
while activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite error
after i tried create a order
program terminated error after entering sold to party no. in sales order
so i have deactivated the project created in cmod & deleted the project inspite i am getting the program terminated error
i am sending total error plz reply quickly urgent friends
Runtime Errors SYNTAX_ERROR
Date and Time 19.04.2008 17:51:58
ShrtText
Syntax error in program "SAPLXVVA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLVKMP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXVVA ", the following syntax error occurred
in the Include "ZXVVAU04 " in line 5:
"The last statement is not complete (period missing)."
Author and last person to change the Include are:
Author "SAPUSER "
Last changed by "SAPUSER "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXVVA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXVVA ", the following syntax error occurred:
"The last statement is not complete (period missing)."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "mtpl7"
Network address.......... "192.100.10.1"
Operating system......... "Windows NT"
Release.................. "5.1"
Hardware type............ "2x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "MTPL7"
Database type............ "ORACLE"
Database name............ "ERP"
Database owner........... "SAPERP"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 8362368
Heap..................... 0
Page..................... 122880
MM Used.................. 4229224
MM Free.................. 995472
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "SAPUSER"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPLVKMP"
Screen.............. "SAPMV45A 4701"
Screen line......... 16
Information on where terminated
The termination occurred in the ABAP program "SAPLVKMP" in
"SD_DETERMINE_KKBER".
The main program was "SAPMV45A ".
The termination occurred in line 0 of the source code of the (Include)
program " "
of the source code of program " " (when calling the editor 00).
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
4
SY-LSIND
0
SY-PAGNO
1
SY-LINNO
8
SY-COLNO
1
SY-PFKEY
U
SY-UCOMM
SY-TITLE
Create Standard Order kb: Overview
SY-MSGTY
E
SY-MSGID
VP
SY-MSGNO
106
SY-MSGV1
BUS2032
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
12 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
11 FUNCTION SAPLV09B LV09BU30 148
SD_PCHECK_PAYER_IN_CREDITAREA
10 FUNCTION SAPLV09B LV09BU26 296
SD_PARTNER_EXECUTE_CHECKS
9 FUNCTION SAPLV09B LV09BU25 57
SD_PARTNER_CHECK_BEFORE
8 FUNCTION SAPLV09A LV09AU26 342
SD_PARTNER_SINGLE_MODIFY
7 FORM SAPLV09A LV09AF39 176
PARTNER_SELECTION
6 FUNCTION SAPLV09A LV09AU29 820
SD_PARTNER_DETERMINATION
5 FUNCTION SAPLV05E LV05EU01 654
VIEW_KUAGV
4 FORM SAPMV45A MV45AF0K_KUAGV_SELECT 40
KUAGV_SELECT
3 FORM SAPMV45A MV45AF0A_AUFTRAGGEBER_PRUEFEN 46
AUFTRAGGEBER_PRUEFEN
2 FORM SAPMV45A MV45AF0K_KUNDEN_PRUEFEN 454
KUNDEN_PRUEFEN
1 MODULE (PAI) SAPMV45A MV45AI0K_KUNDEN_PRUEFEN 15
KUNDEN_PRUEFEN
Chosen variables
Name
Val.
No. 13 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
FUNCTION=SD_PCHECK_PAYER_IN_CREDITAREADATA=LVT_CREDIT_XVBPA
Table reference: 275
TABH+ 0(20) = 70A2883B388BC43B0000000013010000CF060000
TABH+ 20(20) = 020000001E020000FFFFFFFF04910100D82F0000
TABH+ 40( 8) = 02000000C1248400
store = 0x70A2883B
ext1 = 0x388BC43B
shmId = 0 (0x00000000)
id = 275 (0x13010000)
label = 1743 (0xCF060000)
fill = 2 (0x02000000)
leng = 542 (0x1E020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000209
occu = 2 (0x02000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x28C1883B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 2 (0x02000000)
lineAlloc = 2 (0x02000000)
store_id = 690 (0xB2020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x28A4883B
>>>>> 2nd level extension part <<<<<
tabhBack = 0x109C883B
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
I_KKBER
2222
0000
FCODE_KOMM_LIEF_MENGE_SICH
MOD2
44432222222222222222
DF420000000000000000
SYST-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
%_SPACE
2
0
FCODE_KONFIGURATION1
POKO
54442222222222222222
0FBF0000000000000000
CREDIT_CHECK
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
SY-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
SAV_BUKRS
SS00
5533
3300
CHAR_
2
0
%_DUMMY$$
2222
0000
AUTOMO_VOLVO
08
33
08
SPACE
2
0
FCODE_ABRUF_GENERIEREN
PABG
54442222222222222222
01270000000000000000
XVBRK
00000000 0000000
2222222222222222222222222222222222222222222222223333333322222222223333333222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
KOPGR_LIEFERPLAN
LL
4422
CC00
FCODE_ZUSAETZE_FAB
PFZU
54552222222222222222
06A50000000000000000
FCODE_REPARATUR
PREP
55452222222222222222
02500000000000000000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
FCODE_GEFAHRGUT
KGGP
44452222222222222222
B7700000000000000000
I_KKBER_HELP
2222
0000
T001
800SS00SRIYA TEXTILES HYDERABAD IN INR EINT 10K41 0000050495DE1
3335533554542545544452222222222245445444422222222222222224424452244452334332222223333333333443
800330032991045849C530000000000089452121400000000000000009E09E20059E4010B410000000000050495451
FCODE_STOFFBERICHTE
IEHS
44452222222222222222
95830000000000000000
T001-BUKRS
SS00
5533
3300
No. 12 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
I_KKBER
2222
0000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
I_KKBER_HELP
2222
0000
No. 11 Ty. FUNCTION
Name SD_PCHECK_PAYER_IN_CREDITAREA
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_CHECKTYPE
I
4
9
FIF_MSGTYPE
E
4
5
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_KKBER2
2222
0000
LVF_KUNNR
7000000000
3333333333
7000000000
SYST-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
LVF_KURGV2
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
FIS_SDORGDATA-SPART
SM
54
3D
FIS_SDORGDATA-VKORG
T000
5333
4000
FIS_SDORGDATA-VTWEG
S4
53
34
%_O_SD_PARTNER_CONTEXT-HEX_0004
1
0
LVT_CREDIT_XVBPA
Table IT_1743[2x542]
LVF_KKBER1
2222
0000
GCS_HERTAB
ABCDEFG
24444444
01234567
%_DUMMY$$
2222
0000
SY-SUBRC
0
0000
0000
LVF_BEFORE_PARVW
2222
0000
No. 10 Ty. FUNCTION
Name SD_PARTNER_EXECUTE_CHECKS
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_MSGTYPE_TO_EXEC
E
4222
5000
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_ALL_PREDECESSORS_SUCCEEDED
X
5
8
FALSE
2
0
GS_MARKED_PARTNERS
222222222222
000000000000
LVT_CHECKCALLSTACK
Table IT_1515[21x52]
FUNCTION=SD_PARTNER_EXECUTE_CHECKSDATA=LVT_CHECKCALLSTACK
Table reference: 219
TABH+ 0(20) = E8C3863B0000000000000000DB000000EB050000
TABH+ 20(20) = 1500000034000000F00000000491010058090000
TABH+ 40( 8) = 15000000C1248000
store = 0xE8C3863B
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 219 (0xDB000000)
label = 1515 (0xEB050000)
fill = 21 (0x15000000)
leng = 52 (0x34000000)
loop = 240 (0xF0000000)
xtyp = TYPE#000033
occu = 21 (0x15000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x90BF863B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 21 (0x15000000)
lineAlloc = 21 (0x15000000)
store_id = 595 (0x53020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LVS_CHECKCALLSTACK_WA
80000018BUS2030 SD_PCHECK_PAYER_IN_CREDITAREA XX
3333333345533332225455444445545455445454445454422255
80000018253203000034F03853BF01952F9EF325494125100088
GT_MARKED_FOR_DEL_PARTNERS
Table[initial]
LVS_CHECKCALLSTACK_WA-FUNCNAME
SD_PCHECK_PAYER_IN_CREDITAREA
545544444554545544545444545442
34F03853BF01952F9EF32549412510
GC_NO_ACTION
2
0
GC_NEW_PARTNER
I
4
9
GVC_PARTNER_CONTEXT
CONTEXT_X_SD_PARTNER_CONTEXT fò####################################################
44454555555455455445544454552222222222226F0000000000000000000000000000000000000000000000000000
3FE4584F8F34F0124E52F3FE4584000000000000620000000000000000000000000000000000000000000000000000
GC_ERROR
E
4
5
GC_PROCESSMODE_DIALOG
D
4
4
LVF_MSGTYP
E
4
5
BUFFER_FULL_FILLED
F
4
6
POS_NUL
000000
333333
000000
BUFFER_PARTITIAL_FILLED
P
5
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES
0001000200030004000500060007000800090010001100120013NONE
33333333333333333333333333333333333333333333333333334444
0001000200030004000500060007000800090010001100120013EFE5
GCS_PARTNER_TYPE
KUAPLIPE
45454454
B510C905
LVF_RTYPE
0003
3333
0003
GCS_PARTNER_CALL_BACK_EVENTS
CHANGE DELETE NEW
444444222244445422224452222222
381E75000045C5450000E570000000
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCF_INITIAL_PARTNER
0
32
00
GCF_CALLER_TRANSPORT
T
5
4
TPACHECKRELATION
0000000000
2223333333333
0000000000000
GC_APPL_LOG
SDBFPD
54445422222222222222
34260400000000000000
SY-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
GVC_PARTNER_CONTEXT-B0007-PARVW
RG
54
27
No. 9 Ty. FUNCTION
Name SD_PARTNER_CHECK_BEFORE
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LS_STATISTICS
########################4 ################
00000000000000000000000032220000000000000000
00000000000000000000000040000000000000000000
No. 8 Ty. FUNCTION
Name SD_PARTNER_SINGLE_MODIFY
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BOKRE
2
0
FIF_CLEAR_APPL_LOG
X
5
8
FIF_DIALOG
2
0
FIF_HARD_DELETION
2
0
FIF_HISTUNR
00
33
00
FIF_HZUOR
00
33
00
FIF_INITIAL_VALUE
X
5
8
FIF_KNREF_PARNR
2222222222
0000000000
FIF_KUNNR_NEW
7000000000
3333333333
7000000000
FIF_KUNNR_OLD
2222222222
0000000000
FIF_LISTPROCESSING
2
0
FIF_MANUAL_ADDRESS
2222222222
0000000000
FIF_MANUAL_ADDRESS_ORIGIN
2
0
FIF_NO_CPD_DIALOG
2
0
FIF_NO_DIALOG
2
0
FIF_NO_MESSAGES
2
0
FIF_PARGR
TA
5422
4100
FIF_PARTIAL_NEW_DETERMINATION
2
0
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_PRFRE
2
0
FIF_VKORG
2222
0000
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FEV_ACTION_DONE
I
4
9
FRF_LOG_COUNT
0
0000
0000
SYST-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
GVT_LOCAL_CALL_BACK_MEMORY[]
Table[initial]
%_SPACE
2
0
SY-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
LVF_ACTION_TODO
I
4
9
GC_UPD_PARTNER
U
5
5
%_VIASELSCR
0
4
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES-SHIP_TO
0002
3333
0002
LVF_NRART
KU
45
B5
LVF_KUNNR_NEW
7000000000
3333333333
7000000000
GCS_ADDRESS_GROUP
SD01CA01
54334433
34013101
GCF_APPL_TABLE_SD
VBUK
5454222222
625B000000
LVF_ROLETYPE
0003
3333
0003
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LVF_MESSAGE_COUNT
0
0000
0000
%_DUMMY$$
2222
0000
GCF_ADDRESS_TYPE_CONT_PERSON
3
3
3
No. 7 Ty. FORM
Name PARTNER_SELECTION
TVTA
000
222222222222222222222222222222222333222222222222222
000000000000000000000000000000000000000000000000000
TPAER
00
22222222222222332222
00000000000000000000
LVS_XVBPA
000000RG7000000000 0000000000000000000000050510
2222222222222333333543333333333222222222233333333333333333333333333332222222222222222222222222
0000000000000000000277000000000000000000000000000000000000000000505100000000000000000000000000
LVF_PARNR
7000000000
3333333333
7000000000
PIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
PIC_OBJECTTYPE
BUS2032
4553333222
2532032000
PIF_NO_DIALOG
2
0
PIF_PARGR
TA
5422
4100
LVF_PARVW
RG
5422
2700
PIF_POSNRHi Kartik,
Could you please be more clearer as to how do you want me to proceed so that this syntax error stops bothering me while creating a standard order thru TCode VA01.Also what do you mean by "well comment the code in the include and activate the include"
I created a projet in CMOD and than added the enhancement V45A0002.The components shown as EXIT_SAPMV45A_002(Predefined sold to party when making the standard order),i double click on the exit and entered into the function module.After that i double clicked on the include ZXVVZU04 and entered in and wrote E_KUNNR=100171
While activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite the error .After that i tried to create a order and program terminated error came after entering sold to party no. in sales order
so now i have deactivated the project which i created in CMOD & deleted the project also inspite of this i am getting the program terminated error while making the order
I would be great ful if somebody helps me *** out of this syntax error.
Thanks
Rishi -
EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2
Hi guys.
We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
This is not the first time that we have seen this behaviour.
I have experienced it in one other environment, which I keep meaning to rebuild.
These installations are in completely different environments. The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
However, this is now far too coincidental to be the case.
Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
I could really do with a quick win on this one.
ThanksHi,
i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
My system is different:
Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
The issue appears in the last months.
It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
Could you verify if on some machine the evdre works fine and and that when you delete the added member evdre starts to work?
Kind regards
Roberto
Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM -
IQ770 crashed after service pack 1 automatic update.
after service pack one was downloaded ,while on line i would get kicked off.eventually windows wouldnt boot up,and then received a blue screen with an error message saying windows has shut down to prevent further damage to the computer.then the computer would only boot up in safe mode.i tried system restore in safe mode,but it did not work.i called hp technical support. they told me i need to do a system recovery.i tried a system recovery through the hard drive, it went through the whole process,and i thought it was going to work,but when it was time for windows to boot up the computer froze.the tech said i need to purchase a recovery cd and it should work.i ordered it and i followed the directions and ran the cd.when the disc was complete the screen was white,and there was no response of any kind.then after a few hours i shut the computer off.when i turned it back on there was nothing but a screen with vertical colored lines,and no response.i have had the computer for 14 months when this happened.i don't know what to do? has this happened to anyone els?
hi, ive got almost the same problem. I just haven't followed through on the back-up as far as you have. good thing, it looks like. I've almost filled my hard drive, now going on 19mos later. i wish i could help. my video is fine, i think. ive ran every free malware, virus, defender and anti spyware prog i could find for this. and got rid of a lot of supposed threats. but the problems get worse and worse. lately i cant get my hardware to work right. seems one thing after another one piece or another seems to go out. weird thing is: the drivers say they are totally updated just for some reason not working and needs to go online but wireless and ethernet both have "hardware connection errors" so i cant get the sucker online. then my system speakers are out. ive tried uninstalling, disabnling, updating via sd card and hp and microsofts sites (all the trials and errors not necessarily in chronological order) but i dont know what to do. winlogon shuts off, oembios shuts off, now i look over and windows explorer keeps going out aaaaaaarrrrrrgh, i dont have that much money to get new warranty. <text deleted> since i cant get online with mine its not up to me when i can check my email. but if someone wants to try and troubleshoot this with me via messenger if im on or email id really appreciate it. im at a loss cuz im normaly the it tech to go to for vista, but now im lost and would really appreciate any and all info or idea...even if ive tried it, maybe my sequencing was off and im willing to retry ....thanks
Message Edited by WendyM on 08-24-2009 08:13 AM -
Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible
Occurs after I load Dreamweaver; most of the time --- Sometimes not until I try to access CSS Designer
Have screen capture of error (see next page)
Windows 7 Home Premium - Service Pack 1
Platform 64 bit OS
Has worked fine until recently
Have installed one program (Print Artist Platinum 24 by Nova Development)
Tried restore point but not dated back far enough
Uninstalled and reinstalled Dreamweaver CC 2014 from Creative Cloud.. same error
Any Ideas?Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Try step #4 and step #12 -
'CRT not initialized' error after installing MS Office 2010
Hi,
I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
- OS : windows 7 Enterprise (32bit)
- Labwindows/CVI (v12.0.0 (422))
- MS Office 2010 (word, powerpoint, excel)
#1. clean install windows 7 (32 bit)
#2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
#3. compile and run attached test program : SUCCESS
#4. online update windows 7 (service pack, explorer 9, and etc)
#5. compile and run attached test program : SUCCESS
#6. install MS Office 2010
#7. compile and run attached test program : 'CRT error'
#8. uninstall MS Office 2010
#9. compile and run attached test program : SUCCESS
I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
Thank you in advance.
Attachments:
step7-CRT error.jpg 31 KB
test program.zip 3305 KBMore specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
Could you tell me why this problem occur? -
Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena -
Error after changing password in Discoverer Viewer (11.1.1.4)
I (and all other users) get the below error after changing the password used to login to Discoverer Viewer...
Weblogic Version 10.3.4
Discoverer Version 11.1.1.4
Error
The application encounters an invalid state. .
- java.rmi.RemoteException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 ; nested exception is: oracle.discoiv.beans.ConnectionStoreException: ORA-6510: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1
I have already tried the following oracle note (which did not work): http://docs.oracle.com/cd/E17904_01/doc.1111/e14770/discoverer.htm#BABDJJBE
"43.1.1 Issues with Metadata Repository and Oracle Database 10g Release 1"
But we have Oracle Database 11g.
If anyone has any suggestions please advise. I have had a ticket open with Oracle Support now for a few months and they cannot reproduce.
Thanks,
JustinWe also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 -
Internal Server Error after implemeting a Merged Appl_top
Hi folks,
I have been plagued by an issue since a long time. I'm implementing a merged appltop on sun solaris (5.10) on 11.5.10.2
Basically its a clone of two nodes into a single node. After merging, the services are coming up good. Apache is running well. But when opening the AppsLogin page, it is blowing up saying Internal Server Error.
When looked into the mod_jserv.log, it shows the below error.
[07/02/2012 10:28:28:718] (ERROR) ajp12: Servlet Error: OracleJSP: oracle.jsp.provider.JspCompileException: Errors compiling:/d05/ufindev/ufindevcomn1/_pages/_oa__html//_AppsLocalLogin.java<TABLE BORDER=1 WIDTH=100%><TR><TH>Line #</TH><TH>Error</TH></TR><TR><TD WIDTH=7% VALIGN=TOP>259<TD> isRtl(java.lang.String) has protected access in oracle.apps.fnd.sso.SessionMgr if (SessionMgr.isRtl(langCode)) { </TD></TR></TABLE>
[07/02/2012 10:28:28:718] (ERROR) an error returned handling request via protocol "ajpv12"
[07/02/2012 10:28:28:718] (INFO) balance: continuing to u64findev.motel6.com:16440
[07/02/2012 10:28:28:719] (ERROR) balance: 10297 internal servlet error in server u64findev.motel6.com:16440
[07/02/2012 10:28:28:719] (ERROR) an error returned handling request via protocol "balance"
Any idea whats going wrong?
Thanks,
Lakshman.
Edited by: 912983 on Feb 7, 2012 1:54 PMHave you completed all the steps in (Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1] -- Reducing the number of Nodes of a Multi-Node System (merge APPL_TOP)) and (Sharing the Application Tier File System in Oracle Applications Release 11i [ID 233428.1] -- Section 4: Merging existing APPL_TOPs into a single APPL_TOP) with no errors?
Can you find any errors in the database log file?
Was AutoConfig completed successfully?
Please clear the server cache as per (How To Clear Server Cache and Bounce Apache (Web Server)? [ID 295484.1]) and check then.
Also, please see these docs.
Insternal server error After Patch9578141 CPU PATCH FOR JULY 2010 [ID 1221603.1]
Accessing web pages, randomly get Internal Server Error [ID 1374874.1]
Internal Server Error When Trying To Enter The Processed Date In The Adjust Form [ID 549511.1]
Thanks,
Hussein -
Strange Data Mapping Errors after SEM 6 Upgrade. Please assist.
Hi All, I encountered these sudden Mapping errors after I tried to do Testing in Post Upgrade Sand Box. Here I am trying to to perform Collected Reported Financial Data under Data Collection Method for a particular Company Code 3040. Kindly help me with some quick responses as this is kind of high priority. The errors and the Diagnosis Notes I am unable to follow as I do not where I shall write those Mapping Rules they are referring to. I do not even know if that need to apply any SAP Notes as such. Once again Highly appreciate your quick response and Many Thanks in Advance.
Regards, BIP
Input conversion for field Period Value LC has invalid format Message no. UCT8210 Diagnosis The mapping rule for target field Period Value LC contains a move with a selected Input Conversion indicator. Therefore, the system performs an input conversion prior to creating the target data. However, an error in the input conversion occurred while moving the source key figure to the target key figure Period Value LC. This means that the format used for the input conversion is incompatible with the target data. System Response The system will not perform the move. Procedure Examine the mapping rule for field Period Value LC. Either select the Conversion Exit indicator or deselect the Input Conversion indicator. Execute the method again. -
3040 is incompatible with input format for field /1FB/COMPANY Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field /1FB/COMPANY from the mapping rule for the target field. 3040 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field /1FB/COMPANY. However, the value 3040 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 3040 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field /1FB/COMPANY. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field /1FB/COMPANY. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field /1FB/COMPANY. If incorrect values were selected, make sure that the mapping rule used by source field /1FB/COMPANY has been defined correctly. If the mapping rule is correct and value (3040) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 3040 for field /1FB/COMPANY and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field /1FB/COMPANY, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field /1FB/COMPANY is unsatisfactory: You can define a source selection for field /1FB/COMPANY in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field /1FB/COMPANY. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule. -
Cannot derive the source selection from target field Version Message no. UCT8252 Diagnosis Field Version has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Version. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Version. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Versionthrough mapping), choose one of the alternatives below: Change the mapping rule for field Version so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Version. -
Cannot derive the source selection from target field Group Currency Message no. UCT8252 Diagnosis Field Group Currency has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Group Currency. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Group Currency. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Group Currency through mapping), choose one of the alternatives below: Change the mapping rule for field Group Currency so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Group Currency
1 is incompatible with input format for field FISCPERIOD Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field FISCPERIOD from the mapping rule for the target field. 1 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field FISCPERIOD. However, the value 1 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 1 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field FISCPERIOD. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field FISCPERIOD. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field FISCPERIOD. If incorrect values were selected, make sure that the mapping rule used by source field FISCPERIOD has been defined correctly. If the mapping rule is correct and value (1) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 1 for field FISCPERIOD and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field FISCPERIOD, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field FISCPERIOD is unsatisfactory: You can define a source selection for field FISCPERIOD in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field FISCPERIOD. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule
Input must be in the format ___,___,__~ Message no. 00088 Diagnosis Your entry does not match the specified input format. System Response The entry in this field was rejected. Procedure The entry must comply with the edit format. The following edit format characters have a special meaning: "_" (underscore) There should be an input character at this point; this should be a number for numeric fields. "." (decimal point) (applies to numeric fields) The decimal point occurs here (setting in the user master record). "," (thousands separator) (applies to numeric fields) This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma. "V" (applies to numeric fields) The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space). "~" (tilde) (applies to numeric fields) As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position. All other characters have their normal meanings and must be entered in the same position as in the edit format.Hi Dan,
Could you Kiindly advise me where we need to write the Mapping Rules in Consolidation Monitor? All he time the errors refering to Mapping Rules. The only Tab I seen "Mapping" is in Data Basis But as per my Understanding Iwe do not have much to do there as it is system generated Mapping Tab.
Where we actually go and select/deselct those Input Conversion Indicator/ Conversion exit Indicator.
Highly appreciate your advise.
Thanks and Regards,
BIP
Maybe you are looking for
-
Consuming external web services in CAF
Hi there, I am trying to set up a show case where a composite CAF app (exposed via WD or VC) uses SAP web services as well as external services. In this case, I chose to use the Fedex web services (http://fedex.com/developer). Everything works fine,
-
Can No Longer Install WinXP on My Machine
Opened my rig this afternoon and it went into continuous loop reboot. Safe mode was inaccessible and reinstallation of XP Pro was impossible. Called Microsoft and they have no actual fix for the problem. The problem seems to have something to do w
-
I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help
-
MacBook Pro (Late 2008) won't start up
Since December 2012, my MacBook Pro (late 2008) refuses start up. After trying many, many things (from online forums - nothing worked), the solution I found by hit and miss is to heat up the back of the laptop in front of my fireplace (or with a hair
-
I created a URL on a page in Acrobat professional, andI clicked on "block" content instead of clicking on "allow". How do I reverse this and unblock the URL that I created in Acrobat?