Error after transporting a process chain

Hi Experts,
I am facing an issue regarding remote process chain variant, as i have added it in an existing process chain, Now its throwing an error in Quality and the changes are also not visible..Please help me out in finding a solution..
Regards
Arpita

Hi,
when i am transporting it to Quality or production system, that variant for remote process chain is not visible. I have tried it many times. Connectivity between the systems are fine.
I have kept APO System as destination
And Destination for callback BW System..
Please let me know if i am wrong..
Regards
Arpita
Edited by: Arpitac on May 25, 2011 8:51 AM

Similar Messages

Error by transporting a Process Chain / Strange

Hello Gurus,
i am confronted with a strange situation which i could not understand.
We transported a PC into the Quality and it was ok.
Some adjustments were done:
1. the developer delete the DTP in the process chain before deleting in the dataflow.
    According to my info he save those objects under a request.
2. He created a neue DTP and save it in a Transport Request.
3. In the 3. request we save the whole PC.
We transported 1 with record code 4 but the DTP was not deleted in the QA system
We transported 2 to do the correction with return code 8.
We transported 3 with return code 4.
The old DTP still remain in the PC in the QA.
By checking the flow in QA, i found there are two DTPs and in Dev another DTP. That means 3 different DTPs.
Could you please explain what exactly happen?
How to delete the two DTPs in the QA before transporting the whole PC once again?
Thanks

Hi,
Here are the things that I can think of after reading your post..
We transported 1 with record code 4 but the DTP was not deleted in the QA system
>> Deleting a DTP in process chain will not delete the DTP from the Data flow.
     The DTP will be there in data flow only the varaint calling the DTp will get deleted from process chain.
     This is why you are seeing this DTp in data flow in quality system
We transported 2 to do the correction with return code 8.
>> In this TP you might have transported PC with the new DTP.
      But the new DTP was not moved to quality system causing error.
We transported 3 with return code 4.
>> In this TP you might have transported the new DTP.
Please check what objects were present in eact Transport request and sequence of transports.
You can check the transport request contents by using T code se01.
- Geetanjali

Error while collecting the process chain in a transport request

Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
Pallavi

Hi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas

Error while running the process chain

Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amit

hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM

BPM error after transport

hi all,
i get the following error after transport on Q system:
"No object type found for this message; check the activation of the corresponding process"
the trace gives me this explanation:
"could not create BPE proxy for message, no XML object definition found for message 48C56A8CD7D615EEE10000000A9E014F"
In SXI_CACHE the business process has status zero, business process and everythng else in transport is active.
So what else can i do to fix that bug?
Thanks
Stefan

HI,
Then check the error log carefully. Problem might be some else. If not try to reimport the transport with the help of BASIS.
Also check the status of check table in quality. Is it active?
All ur objects are in single TR? If not the u have to move check table TR first and then later objects TR.
If nothing works then include all the objects in another TR and transport. make sure all are active.
Thanks,
Vinod.

Reverse transport of process chains ( Quality to Dev ) ?

HI all ,
i need to transport the process chains from Quality to development .
i have started collecting the process chains by using only necessary objects as grouping ,
here i am getting all the objcets like DTP , INfopakage , infoobjces , etc and Source system also .
i dont want to transport all the objests & just want to transport only process chains .
can any one plz tell me how to proceed with this .
Thanks ,
Edited by: BIuser on Dec 22, 2011 4:05 PM

Hi,
Please check the steps mentioned by Kamal,
Source system conversion after transport - RSA1->Tools->Conversion of Logical System Names.
Check the thread,
No Source system exist
Also in your case you are trying to move some objects from Quality to Development.
So kindly check with Basis also if they have maintained proper transport paths.
Regarding BDLS runs, during system copy one bw system will be copied on different BW system having different R3 system connection. In such cases basis does several BDLS runs where the target BW systems will have transformations of source BW system (source system). Once the basis completed BDLS runs the source system of source BW system will be changed to target source system in target BW system.
Please check with Basis if you are doing a system copy.
Thanks,
Vinod

(Urgent)Transports of Process Chains

Hi,
I have transported the process chain to Quality.
In Development we tested and it worked fine.
But in Quality it failed saying "no variant found for a process compression".
Help me out.

Hi Indira,
Check out whether all the objects included in the process chain are also transported to Quality server.
The error might have occured becuase the corresponding object of a process in the process chain might not be active or missing in the quaality system.
Hope this helps,
Regards

Schedule options while transporting in Process chains

I have created a Process Chain which is scheduled for Immediate processing.
I have to transport the Process Chain to Production System, where the process chain should run Daily. So should I change the schedule options before transporting or should the schedule options be changed in Production system.
Will the schedule options also be transported to target system while transporting?

Hi,
I have to transport the Process Chain to Production System, where the process chain should run Daily. So should I change the schedule options before transporting or should the schedule options be changed in Production system.
After importing into Production, it will not be triggered automatically. We need to exexute it in production manually.
We have option to change the System settings ,to change the Process chain in Production.So that we can change the schedule options as per our requirements directly in Production. This setting is there in Trasnport connector screen.And this needs to be done in Production.
Regards,
Anil Kumar Sharma .P

RFC ERROR while running BI Process Chain

I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
Thanks

This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

Create Package while transporting a process chain

I want to transport a process chain but while doing so it is asking for “package” name. I do not have authorization to tcode SE21 to create a Package. I checked with ABAPer and he also does not have access to SE21.
Is it mandatory to transport a process chain only via a “package”? Are there alternative methods available which you can suggest?

Thanks..
Yes, this is the first process chain we are transporting.
I tried maintaining the paramters in RSTPRFC with the below settings..
Client: BW client 001
Destination: TPBWMANDTRFC
User: ALEREMOTE
PWD: ************
I want to know whether the details of teh destination are correct. If so, are these settings need to be maintained in QA and Prod systems as well?
Thanks and Regards,
Srinivas

Warnings while transporting a process chain

Dear all,
I am getting the below warning message when I am transporting my process chain into Quality. Due to this, the PC is now in inactive version in the target system.
The logs shows the below message
No destination maintained in target client 001 -> Not activated
Message no. RSPC085
Diagnosis
When activating a process chain, this is checked and scheduled. Both the checking of a process chain and its scheduling require that
1. the function is executed in the target client of the import and
2. the user executing the function has the appropriate authorizations.
This is usually the case for the BW background user
The function can be executed in the target client if an RFC logon occurs in the target client. An RFC destination must be predefined for this purpose. This destination is used for logon to the target client from client 000 during import postprocessing.
This destination does not exist in this system.
System Response
The process chain will not be activated, which means that it will not be checked, scheduled, or saved in an active version. The process chain will only be adjusted to the local situation (for example, key changes with objects that are dependent on the source system), and will not be saved in a modified version.
Procedure
Create a destination for the import postprocessing.
Can some one please help on this.
Thanks and Regards,
Srinivas

Thanks..
Yes, this is the first process chain we are transporting.
I tried maintaining the paramters in RSTPRFC with the below settings..
Client: BW client 001
Destination: TPBWMANDTRFC
User: ALEREMOTE
PWD: ************
I want to know whether the details of teh destination are correct. If so, are these settings need to be maintained in QA and Prod systems as well?
Thanks and Regards,
Srinivas

Error when creatiing transport for process chain

Hi Experts,
I am trying to create a transport for a process chain, but when i click on the red truck i get the following error: Error in Object Editing: Edit objects seperately since they belong to different original systems.
Can you please advise me on how to resolve this issue? Thanks in advance.

Has this process chain or some components of it (for example IPAK) been brought from some other system?
Try collecting all the objects in RSA1/Transport connection - and see the directory entries for each subobject (txnSE03 or TADIR table). You may have to either change the source system for some objects (in SE03) or split the transport objects manually into multiple transports.

Error while copying a process chain.

Hi All,
I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
Please confirm.
Regards,
Shailja.

Hi Shailja,
That means that you can not change that type of object on Quality or Productive server.
Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
Beware that you must change the status not with a double click but with a right click
also refer the following thread you can find your solution
Error message after process chain transport
Hope this helps
Regards
Karthik
<3rd Reminder for points removed>
Message was edited by:
Moderator

Reg. Error while Full load - process chain

Hi,
I am running a process chain, which is a full load. In Manage screen it is in RED status whereas, While i chekced in Monitor screen it is showing as "Missing messages" . While I checked in the error and warning messages, I found that the data packet should be run manually. So I tried Manual update option by killing the job manually. After doing this i tried to run the same process with "Back to Technical Status" option. While performin this again i got an error saying "REQUXXXX terminated, as data packet 0000XX could not be locked"
How this error can be rectified.
Please advice.
Thanks in advance!!!
Regards,
Melissa

Hi Melissa.....
While i chekced in Monitor screen it is showing as "Missing messages"........where did u got the message.............in the data packet.......right...........?..........
I found that the data packet should be run manually. So I tried Manual update option by killing the job manually..................which job u hav killed........? Extraction Job?If u hav killed the Extraction job........then Manual update is not possible..............Manual update is only possible when the Extraction job will get completed successfully........
Due to this u r getting the Error Message error saying "REQUXXXX terminated, as data packet 0000XX could not be locked"....................When the request itself does'nt exist............how could u do Manual update for that deletedrequuest........
Then only option is..............make the QM status red.............delete the request from the target and repeat the load.........
Hope this helps.......
Regards,
Debjani........

Error while executing the Process chain

Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit P

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks

Error after transporting a process chain

Similar Messages

Maybe you are looking for