Error after transporting the web page

Hi Experts,
I exported the whole site and its pages from dev to poc server. The problem is the site and page gets transported but the contents of the page are not getting transported.. In the page i had inserted an iview(which is present on both the servers).
When i open the transported page it given an error saying..
" 500 Internal Server Error
The system could not find a published version of the requested page.
To avoid this error please go in design mode and publish at least one of the page variants. "
Not been able to figure out the reason for it.
Can somebody help me out with this matter.. ??

check the id of that iview which is not transported. if it start with com.sap, then change it to some other
portal object which starts with com.sap as their ID cannnot be transported.
Raghu

Similar Messages

How to delete the error message in the Web page Message Monitoring

Hi All:
I'd like to ask a question.If there is error message in the T-code sxmb_moni->Monitor for Processed XML Messages,I can cancel the error message manually and archive the message. After that,I can delete the message from "Monitor for Processed XML Messages".
But after those operation,I find in the web page " Message Monitoring", there are still messages in the "Messages from Component Integration Server and/or Adapter Engine".
How can I delete those message both successful and error.
Thanks All
Elliott

Hi Elliot,
SXMB_ADM
Integration Engine Configuration
Specific Configuration
Category: DELETION
Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
Subparameters: SYNC, ASYNC
Change "Current Value".
and execute your delete job again!
Regards,
Udo

Error accessing webpage: The Web.Page function requires scripting to be enabled in the Internet Explorer options.

I'm getting the rather cryptic error posted in the title of this question when attempting to access a
webpage with a single html table in Power Query.
I've done some searching but cannot even find reference to the error message, much less a solution.
The error implies that there is a problem with my settings in Internet Explorer, but surely Power Query is not dependent upon my IE install and settings.
Any help is greatly appreciated.

Curt,
Thanks for your reply and correcting my mistaken assumption.
Do you know precisely which settings are necessary? I had most of the 'Scripts' options enabled already in IE. Too impatient to troubleshoot individually, I simply enabled everything and it is working now.
Thanks

Error while opening the web page

Hi,
i am trying to start the srm login page using web. with the service BBPSTART..its not opening it shows ' Firefox can't establish a connection to the server at xxxx.xxx'.
what might be the problem...
kindly help me with it...
thx.

Hi,
Its OK.
That is why I have already written that you have to take your Basis Guy Help to find out whether he has assign the port to the SRM Server and has maintained the entry in the table.
Take help of your Basis Consultant
Regards,
Sachin

Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated

The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.

Error when trying to dispay the web page

java.lang.NullPointerException
     at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
     at javax.faces.webapp.UIComponentTag.encodeBegin(UIComponentTag.java:591)
     at javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:478)
any help would be appreciated

Does this error happen for all your web pages or just one web page.
If it just happens with a certain web page, what is different about it?
Is it a page that you created with an earlier version of the IDE?
Sometimes in the stack trace that you cut the error msg from, there will be entries for the web page itself. Did you search through the whole set of stack traces to see if it identified an errant line in the .java file for the web page?
Can you put log("some string") statements in your .java source and view the log to determine when and where the problem is happening?
Have you tried the debugger? See http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/debugging.html

After afewSecond,whenPress saveButton"the web page cannot be displaed"shown

hello
we have an application with many pages in it
in only one page of this application, when user press save button , it seems the background session expired
and "the web page cannot be display" message appears,
our server is weblogic 11g and application deployed with netbeans 6.0 JSF 1.2 wisual web
what can i do ?
is there any suggestion
thank you very much
Edited by: 981520 on Jan 13, 2013 12:28 AM

Shive...good one..!!
One thing that you can do if you don't wanna have PPR, is to validate date column in fire action event in CO in process form request, and raise an error if you don't find appropriate format or null , as per your requirement.
--Mukul

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

What happened to the icon of the "house"? After searching the web or checking my e-mail I could alway click on the house to return to my home page. Now I have to keep clicking the back arrow or enter my home page on my google search.

Question
What happened to the icon of the "house"? After searching the web or checking my e-mail I could alway click on the house to return to my home page. Now I have to keep clicking the back arrow or enter my home page on my google search. edit

The home button has by default moved to the right hand edge of the navigation toolbar. You can move it back by right-clicking on a toolbar, choose customize to open the customize toolbar window, then with that window on display you can drag and drop icons to move them.
If the home icon is not at the right end of the navigation toolbar, use the procedures in the following link to restore it - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

TS1398 I can't access to the web pages thro' Wi-Fi, after switching on the wi-fi.But if I switch off the iphone andswitch on the phone then I can get the web pages.Daily I have to repeat this process to access the web pages.help to solve the problem.

I can't access the web pages thro' wi-fi,But if I switch off the phone and thenswitch on the phone again I am able to access the web pages.Daily I have to repeat this process.help to solve this problem.

Does using 192.168.1.1 get you to the web page?
Firmware Update Process
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
PC Web Browser Configurations
What browser are you using?
If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the local log-in account on the router first.

I am constantly getting pop ups saying that The URL is not valid and cannot be loaded even though I am on the web page.

I have version 3.6.13 Firefox. I have uninstalled and reinstalled, but still keep getting an error message saying that The URL is not valid and cannot be loaded. This happens even when I am on the web page, but the message continues to keep popping up.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Best Practices Question: How to send error message to SSHR web page.

Best Practices Question: How to send error message to SSHR web page from custom PL\SQL procedure called by SSHR workflow.
For the Manager Self-Service application we’ve copied various workflows which were modified to meet business needs. Part of this exercise was creating custom PL\SQL Package Procedures that would gather details on the WF using them on custom notification sent by the WF.
What I’m looking for is if/when the PL\SQL procedure errors, how does one send an failure message back and display it on the SS Page?
Writing information into a log or table at the database level works for trouble-shooting, but we’re looking for something that will provide the end-user with an intelligent message that the workflow has failed.
Thanks ahead of time for your responses.
Rich

We have implemented the same kind of requirement long back.
We have defined our PL/SQL procedures with two OUT parameters
1) Result Type (S:Success, E:Error)
2) Result Message
In the PL/SQL procedure we always use below construct when we want to raise any message
hr_utility.set_message(APPL_NO, 'FND_MESSAGE_NAME');
hr_utility.raise_error;
In Exception block we write below( in successful case we just set the p_result_flag := 'S';)
EXCEPTION
WHEN APP_EXCEPTION.APPLICATION_EXCEPTION THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
WHEN OTHERS THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
fnd_message.set_name('PER','FFU10_GENERAL_ORACLE_ERROR');
fnd_message.set_token('2',substr(sqlerrm,1,200));
fnd_msg_pub.add;
p_result_message := fnd_msg_pub.get_detail;
After executing the PL/SQL in java
We have written some thing similar to
orclStmt.execute();
OAExceptionUtils.checkErrors (txn);
String resultFlag = orclStmt.getString(provide the resultflag bind no);
if ("E".equalsIgnoreCase(resultFlag)){
String resultMessage = orclStmt.getString(provide the resultMessage bind no);
orclStmt.close();
throw new OAException(resultMessage, OAException.ERROR);
It safely shows the message to the user with all the data in the page.
We have been using this construct for a long time for all our projects. They are all working as expected.
Regards,
Peddi.

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

Sorry, we could not complete the operation. Please try again later or reload the web page

I am a bizspark member and wanted to signup for Azure.
I did phone verification part and when I sign up I get this error
Sorry, we could not complete the operation. Please try again later or reload the web page
Same happened with my colleagues ones too. But 2 invites got accepted after reloading the webpage for 100+ times. I am loosing my patience here. I have seen others getting this error as well. Do you guys have any idea how irritating this is? Azure support
is also not responding properly. Its a big headache for developers like us.
When will you solve this issue? And I want an correct explanation why this error occurs. Don't tell me to clear cookies and cache. I've done everything. Tried different browsers.

Hi,
It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
Get the support channel at:
http://www.windowsazure.com/en-us/support/options/
If you have any other concern, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am connected to my remote server and "put files" but the web page files do not update, whats going on?

I really can't figure this out:
So I use a different computer at school for web design, I bought Dreamweaver to work on it at home, I get the files fine from the server that I uploaded at school but then I make changes at home computer and connect and "put" them and I check online and the web page doesn't change one bit.
I don't have the exact file extensions from the computer at school but when I connect and get I have a similar folder(s) set up and then it downloads them into Dreamweaver file manager box and makes the folders there I downloaded. The site shows up fine in Dreamweaver after I "get" so great I thinking.
But... not so fast, I change the page in Dreamweaver, preview n a browser and look right on so I "put", connect to server and upload. Then I check online an its still the same I uploaded the CSS and HTML and dependent files by dragging over and also using the up arrow "put" as well but nothing changes on the web page online.
What is happening here I am so confused?
Thanks a bunch, I mean I can still preview as I go but I really curious why my "put" files don't change my web page like at all!

Have you tried refreshing the browser, or deleting the browser cache?

Error after transporting the web page

Similar Messages

Maybe you are looking for