Error after updating firmware

I had a working ipad 1 which I updated to the most recent firmware but got an error message
Now the iPad is stuck on the screen asking me to connect the USB cabe as if it was new
But now nothing happens when i connect to iTunes I cant even see the device, I know iTunes works OK because my iPhone works
Could someon please assist
I have done all the normal things switching the iPad off and on, Checked iTunes it up to date restarted my PC

Have you tried putting it into recovery mode as mentioned on this page http://support.apple.com/kb/ht4097 ?

Similar Messages

Kernel panics after updating firmware

Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
Sun Jul 5 18:24:05 2009
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
Can anyone decipher my KP log and see if there is a fixable problem?
thanks in advance,
Pat Leopard

Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
Wed Jul 8 10:44:41 2009
panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
I left the computer alone for a while and when I hit the power button it came right up.
I'm going to pull RAM modules per your suggestion.
thanks,
Pat Leopard

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)

Does any experience this problem after updating to ZCM11sp1?
I keep getting IE8 unsupported error after updating to ZCM 11 Support
Pack 1 (11.1) although I am running on IE8 already. Now remote
management is not working because of this incompatible browser errors. I
tried this following
link:http://www.novell.com/support/viewCo...9158&sliceId=1
But it does not help.
Any suggestion or idea would be greatly appreciated!!!

On 8/29/2011 8:26 AM, craig wilson wrote:
> Double Check all of your settings there, including the option to view
> Intranet sites in compatibility mode.
>
> For some reason, your IE8 is reporting itself as IE7 and running in IE7
> mode which is no longer supported.
>
> On 8/29/2011 9:17 AM, April wrote:
>> Does any experience this problem after updating to ZCM11sp1?
>>
>> I keep getting IE8 unsupported error after updating to ZCM 11 Support
>> Pack 1 (11.1) although I am running on IE8 already. Now remote
>> management is not working because of this incompatible browser errors. I
>> tried this following
>> link:http://www.novell.com/support/viewCo...9158&sliceId=1
>>
>>
>>
>> But it does not help.
>>
>> Any suggestion or idea would be greatly appreciated!!!
>
>
Thank you for your responding. I have already checked to view Internet
sites in compatibility mode with no luck. I tried several different
computers with IE8 but they all got the same problem.

Error after updating kernel 640U patch to 247

Hi Forum,
There are some repetitive errors after updating kernel 640U patch to 247:
======================================================
X Sun Feb 22 07:01:01 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
X Sun Feb 22 07:01:08 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
X Sun Feb 22 07:01:19 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
======================================================
Please help.
Regards,
Agoes
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:53 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:55 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:56 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:57 AM

Hello Agoes,
You can ignore these error messages,these come when u upgrade the kernel to 246 or 247
Please refer to not 1239685 for more info
So no issues
cheers
Rohit

.wav error after update

This past week my curve did an automatic update when I plugged it into the manager. Prior to the update I was able to play the .wav files that are emailed to me by my office voicemail system. Now after the update I get an error stated unsupported format. I'm on Sprint.
Anyone know why this error is occurring and how I can get it to play the .wav files again?
Thanks,

Hello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark

Error after update : "Method 'Upgrade' does not have an implementation"

Hello,
After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation.
And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
Any idea ?
Thanks in advance for your answer.
Mike

Hi Mike,
If you are using SharePoint 2013 Server edition, please re-download the
SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
issue you can take a look.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
Thanks
Daniel Yang
TechNet Community Support

Error after update Oracle SQL Developer Migration Tools

Hi,
I'm receiving a error after the update of Oracle SQL Developer (v.1.1.3.27.66) to work with mySQL migration tool.
This error appear when it´s restarting:
Exception Stack Trace:
java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
 at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
 at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
 at java.net.URL.getURLStreamHandler(URL.java:1106)
 at java.net.URL.<init>(URL.java:393)
 at java.net.URL.<init>(URL.java:283)
 at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
 at oracle.ide.layout.URL2String.toURL(URL2String.java:104)
 at oracle.ideimpl.editor.EditorUtil.getURL(EditorUtil.java:150)
 at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:122)
 at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
 at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
 at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1751)
 at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
 at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
 at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
 at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
 at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
 at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
 at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
 at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:356)
 at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1879)
 at oracle.ide.layout.Layouts.activate(Layouts.java:784)
 at oracle.ide.layout.Layouts.activateLayout(Layouts.java:186)
 at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:734)
 at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
 at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
 at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Anyone knows why that is happining?
Thanks in advance,
Felipe.
Message was edited by:
felipe.b

Hello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark

There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you,

Compass application can't running well after update firmware to 20120726

my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it?

on my n73 i can go to app manager and reinstall them.
if u wanna remove it, then reinstall them and uninstall.
Blackberry Bold

Sony A7 failed to turn on after updating firmware 2.00

As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

I bought the Sony A7II a few days ago. It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer. Neither one would get the charge light to illuminate. Not feeling the love Sony. I just purchased a Flash, wrist belt, filters, etc... I'm definitely not happy. It seems this is a problem!

Some buttons without tones after updating firmware...

Hi.
After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
Should I try to restore the phone by *#7370# ???
Is anybody facing the same issue ???
br,

Hey,
I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone. Such a progressive step..

Apple TV doesn´t work at all after updating firmware!

After updating firmware Apple TV 3 the only thing that works is the little lamp on the front...it´s steadily blinks. It doesn´t response to remote control, and don´t show up threaded via USB in Itunes for resetting.
Model: Apple TV 3
Itunes: 12.0.1.26
What to do?

The update didn't apply correctly. You need to restore via iTunes.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure you follow the steps correctly (unplug all cables, connect micro usb, then reconnect power)
Connect directly to a computer, not a keyboard port or USB hub. Try a different cable

After Updateing Firmware defult password is What?

Sir
i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

Hi Udayaraj,
Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
once try cisco/cisco or admin/admin.
Thanks,
Phanikrishna

Wlan error after a firmware update

Ok there seem to be many posts about this issue but i cannot find anything that seems to work for me.
I not to recently updated my N95 8Gb firmware to 20.0.16 and found that I was having errors with WPA on WLan, previously I had no such problem and the issue only occured after the firmware update.
to add some more info I am on a network with a linksys wrt300n
I have tried wep it works but dont want to compromise security.
All computers on the network are using wireless g and the key is definitely correct when entered
any help would be most appreciated

I don't have N95, but if the firmware is updated to latest version the wpa most likely wpa2. Having wpa in place of wep gives only very little added security for a determined hacker! It will only takes 30min to an hour to crack that. Security like that deter only the free net riders. Try if there is upgrade for your modem/router, its usualy the case. For home network wep or wpa sufficed.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Error after updating firmware

Similar Messages

Maybe you are looking for